PULSEJACK TM Surface Mount 1x1 Description: 10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC). Features and Benefits: Peak solder temperature rating per Table 5-2 in IPC/JEDEC J-STD-020C For RoHS part, add suffix NL3 J0C SMT product, reduced size and low cost alternative to JV series SMT Contacts JV0 Electrical Performance Summary: Meets IEEE 802.3 specification High performance for maximum EMI suppression J0C J30 Electrical Specifications @ 25C -- Operating Temperature 0C to +70C Turns Ratios Part 2 Number RoHS 3 TX J0C-0003 J0C-0004 J0C-0005 J0C-0006 JV006I21 JV011I21 JV026I21 J3006G21D J3011G21D J3018G21K J3026G01D J3026G21D Tab LEDs 1 Option L/R Up/Down BST Circuit EMI Finger RX NL NL NL NL NL NL NL 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CTS:1 4 1CT:1 NL 1CT:1 4 1CTS:1.414 4 1CTS:1 4 1CTS:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 Down Down Down Down Down Down Down Up Up Up Up Up No No No No No No No G/Y G/Y G/G G/Y G/Y No No Yes Yes No Yes Yes No Yes Yes Yes Yes No Yes No Yes Yes Yes Yes Yes Yes Yes No Yes Insertion Loss TX/RX (dB MAX) Return Loss (dB MIN) 100 ( 15) Common Mode Rejection (dB MIN) Crosstalk (dB MIN) Hipot (Vrms) (MIN) 1-65 MHz 1-10 MHz 30 MHz 60-80 MHz 1-10 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-130 MHz @60 Hz 1 MIN -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -18 -18 -18 -18 -20 -20 - 20 -20 -20 -20 -20 -20 -14 -14 -14 -14 -16 -16 -16 -16 -16 -16 -16 -16 -10 -10 -10 -10 -12 -12 -12 -12 -12 -11.5 -12 -12 -35 -35 -35 -35 -40 -40 -40 -40 -40 -40 -40 -40 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Notes: 1. LEDs Left/Right: G = green; Y = yellow. 2. Add suffix "T" for Tape & Reel option (e.g. J0C-0004T). 3. Add suffix "NL" for RoHS compliant parts (e.g. J0C-0004 changes to J0C-0004NL, or J0C-0004NLT for Tape & Reel option). 4. Contact Pulse for RoHS compliant part availability. RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) J0C/JV/J3 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Part Number Material Shield Finish J0C/JV/J3 Series Brass 20-40 inches thick nickel over Brass Material Contact Plating Area Solder Area Phosphor Bronze 15 inches gold over 30-80 inches nickel 75-300 inches tin-lead over 30-80 inches nickel Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 2. MSL = Moisture Sensitivity Level rating: 1 to 5 (highest rating = 1, lowest rating = 5). 4 Housing Material Specification High Temp. Thermoplastic 2 MSL Rating UL 94 V-0 13 3. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1. 4. NL parts are tin matte finish over nickel. USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 1 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J0C Platform Schematics J0C-0003/4 J0C-0005/6 TD+ 1 TD+ 1 1 TX+ 1 TX+ CT 4 CT 4 75 CT 5 RD- 6 6 RX- 1CT : 1 RECEIVE NC 7 RD+ 3 3 RX+ CT 5 75 RD- 6 6 RX- 1CT : 1 RECEIVE 4 4 NC 7 5 75 5 7 7 GND* 8 2 TX- 1CT : 1 TRANSMIT CABLE SIDE 3 RX+ RD+ 3 PCB SIDE TO PHY 1CT : 1 TRANSMIT TD- 2 2 TX- CABLE SIDE PCB SIDE TO PHY TD- 2 GND 8 8 0.001mF NOTE: Connect GND to PCB ground. 75 8 USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 2 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 JV Platform Schematics JV006 CABLE P C B side to P H Y CABLE P C B side to P H Y JV011 CABLE P C B side to P H Y JV026 USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 3 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J3 Platform Schematics J3006 CABLE P C B side to P H Y CABLE P C B side to P H Y J3011 CABLE P C B side to P H Y J3018/J3026 USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 4 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J0C Platform Mechanicals J0C-0004/6 (J0C-0003/5 - Same platform without EMI Fingers) EMI Fingers EMI Fingers USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 5 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 JV Platform Mechanicals JV Series JV0XX121 Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 6 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J3 Platform Mechanical J3 Series J3026G21D With EMI Tabs J30XXGX1D Date Code Country of Origin J3026G21D Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 7 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J0C Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350H. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with NOTE: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix "T" for Tape & Reel orders (ex: J0C-0003T). Add the suffix "NL" for RoHS compliant parts (ex: J0C-0003NL for Trays and J0C-0003NLT for Tape & Reel). J0C-003/4 Connector 10/100 IC PHY VCC 0.01 f 8 NC 7 RX- TPOR 50W * 2 0.01 f TPOR + TPOP - NC 50W * 2 TPIP + 6 NC 5 TXCT 4 RX+ RX 1:1 3 TX- 2 TX+ 1 0.01 f Shield PCB PAD 8 7 6 5 4 3 2 1 RJ45 TX 1:1 Shield PCB PAD 0.01 f Analog GND Chassis GND NOTE: Connector design not to scale PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50 connections. 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 8 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 JV Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JV series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350H. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with NOTE: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix "T" for Tape & Reel orders (ex: JV006I21T). Add the suffix "NL" for RoHS compliant parts (ex: JV006I21NL for Trays and JV006I21NLT for Tape & Reel). JV006I21 Connector 10/100 IC PHY VCC 0.01 f TPOR - 50W * 2 0.01 f TPOR + TPOP - 50W * 2 TPIP + Shield PCB PAD NC 6 RX- 5 RX+ RX 1:1 4 TX- 3 TX+ 2 TXCT 1 0.01 f 8 7 6 5 4 3 2 1 RJ45 TX 1:1 Shield PCB PAD 0.01 f Analog GND Chassis GND NOTE: Connector design not to scale PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50 connections. 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 9 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J0C Packaging Specifications J0C Series Weight..............7.07 grams Tape & Reel ............90/reel Tray ........................80/tray Tape ...................44x32mm Tube ......................25/tube Tape and Reel Specification Tray Specification USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 10 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 JV Packaging Specifications JV Series Weight ...............6.6 grams Tape & Reel ..........150/reel Tray ........................45/tray Tape ...................44x32mm Tape and Reel Specification Tray Specification USA 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 769 5538070 * Taiwan 886 2 26980228 www.pulseeng.com 11 J409.D (7/05) PULSEJACK TM Surface Mount 1x1 J3 Packaging Specifications J3 Series Weight ...............8.1 grams Tape & Reel ............75/reel Tray ........................45/tray Tape ...................56x32mm Tape and Reel Specification Tray Specification For More Information: Pulse Worldwide Headquarters Pulse Northern Europe Pulse Southern Europe Pulse Pulse North China China Headquarters Room 1002 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870 No. 819 Nanjing West Rd Shanghai China TEL: 86 21 32181071 FAX: 86 21 32181396 Pulse South Asia Pulse North Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 3F-4, No. 81, Sec. 1 Hsin Tai Wu Road Hsi-Chih Taipei Hsien Taiwan TEL: 886 2 26980228 FAX: 886 2 26980948 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2005. Pulse Engineering, Inc. All right reserved. www.pulseeng.com 12 J409.D (7/05)