Notes: 1. LEDs Left/Right: G= green; Y= yellow.
2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T).
3. Add suffix “NL” for RoHS compliant parts (e.g. J0C-0004 changes to
J0C-0004NL, or J0C-0004NLT for Tape & Reel option).
4. Contact Pulse for RoHS compliant part availability.
Features and Benefits:
Peak solder temperature rating per Table 5-2 in IPC/JEDEC J-STD-020C
For RoHS part, add suffix NL3
J0C SMT product, reduced size and low cost alternative
to JV series
Electrical Performance Summary:
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J0C/JV/J3 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs
.
RJ45 Durability Testing Rating
Description:
10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics
Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC).
JV0
J0C
SMT Contacts
J30
Insertion Return Loss Common Mode Hipot
Turns Loss (dB MIN) Crosstalk Rejection (Vrms)
Part
2
Ratios Tab LEDs
1
BST EMI TX/RX 100Ω (±15Ω) (dB MIN) (dB MIN) (MIN)
Number
RoHS 3
Option L/R Circuit Finger (dB MAX)
TX RX
Up/Down 1-65 1-10 30 60-80 1-10 30-60 60-100 1-50 50-130 @60 Hz
MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN
J0C-0003 NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0004 NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0005 NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0006 NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV006I21 NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV011I21 NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV026I21 NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 - 20 -16 -12 -40 -35 -30 -30 -20 1500
J3006G21D
4
1CT:1 1CT:1 Up G/Y No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3011G21D NL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3018G21K
4
1CTS:1.414 1CT:1 Up G/G Yes Yes -1.0 -20 -16 -11.5 -40 -35 -30 -30 -20 1500
J3026G01D
4
1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G21D
4
1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
PULSEJACKTM
Surface Mount 1x1
Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements.
2. MSL = Moisture Sensitivity Level rating: 1 to 5 (highest rating = 1, lowest
rating = 5).
3. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1.
4. NL parts are tin matte finish over nickel.
Part Shield Contact Housing MSL2
Number Material Finish Material Plating Area Solder Area4Material Specification Rating
J0C/JV/J3 20-40µ inches thick nickel Phosphor 15µ inches gold over 75-300µ inches tin-lead over High Temp.
Series Brass over Brass Bronze 30-80µ inches nickel 30-80µ inches nickel Thermoplastic UL 94 V-0 13
RJ45 Material Specification
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
1 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
J0C Platform Schematics
J0C-0005/6
J0C-0003/4
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
GND* 8
NC 7
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
GND
NOTE: Connect GND to PCB ground.
75
75
75
75
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
2 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
JV Platform Schematics
JV006 JV011
JV026
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
3 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
J3 Platform Schematics
J3006 J3011
J3018/J3026
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
4 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
J0C Platform Mechanicals
(J0C-0003/5 - Same platform without EMI Fingers)
J0C-0004/6
EMI Fingers
EMI Fingers
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
5 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
JV Platform Mechanicals
JV Series
JV0XX121
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
6 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
J30XXGX1D
Date Code
Country of Origin
J3026G21D
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
J3026G21D
With EMI
Tabs
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
7 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JC0 series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: J0C-0003T). Add the suffix “NL” for RoHS compliant parts
(ex: J0C-0003NL for Trays and J0C-0003NLTfor Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
8 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JV series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts
(ex: JV006I21NL for Trays and JV006I21NLTfor Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
9 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
Tape and Reel Specification
Tray Specification
J0C Packaging Specifications
J0C Series
Weight..............7.07 grams
Tape & Reel ............90/reel
Tray ........................80/tray
Tape ...................44x32mm
Tube ......................25/tube
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
10 J409.D (7/05)
Tape and Reel Specification
Tray Specification
JV Packaging Specifications
PULSEJACKTM
Surface Mount 1x1
JV Series
Weight ...............6.6 grams
Tape & Reel ..........150/reel
Tray ........................45/tray
Tape ...................44x32mm
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
11 J409.D (7/05)
PULSEJACKTM
Surface Mount 1x1
Tray Specification
Tape and Reel Specification
J3 Packaging Specifications
J3 Series
Weight ...............8.1 grams
Tape & Reel ............75/reel
Tray ........................45/tray
Tape ...................56x32mm
www.pulseeng.com
12 J409.D (7/05)
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse
Northern Europe
3 Huxley Road
Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
Pulse
Southern Europe
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
Pulse North Asia
3F-4, No. 81, Sec. 1
Hsin Tai Wu Road
Hsi-Chih
Taipei Hsien
Taiwan
TEL: 886 2 26980228
FAX: 886 2 26980948
Pulse
China Headquarters
No. 1
Industrial District
Changan, Dongguan
China
TEL: 86 769 5538070
FAX: 86 769 5538870
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2005. Pulse Engineering, Inc. All right reserved.
Pulse North China
Room 1002
No. 819
Nanjing West Rd
Shanghai
China
TEL: 86 21 32181071
FAX: 86 21 32181396