3.17
SERIES 1004 / 1005 / 1006 - ENCLOSED SNAP ACTION SWITCHES
UP TO 21 (8) A 250 V~
PRODUCT ADVAN TAGES
◆Universally applicable, proven snap
action switch series with high functional
reliability in size DIN 41635 design A
◆Long mechanical life endurance
◆Very high inrush currents
◆Compulsory friction contact system, its
shearing movement can free welded
contacts
◆Wide range of ratings from
6 (2,5) A 400 V~ to 21 (8) A 250 V~
◆Contact gaps < 3 mm
and "3 mm
◆Actuating forces of
0,2 N to 4,2 N
SWIT CHIN G FU NCTI ONS
◆Change-over
◆Normally open
◆Normally closed
TERM INAL VERSIONS
◆Solder terminal and
short solder terminal
◆Quick-connect 6.3 x 0.8 mm
◆Quick-connect 4.8 x 0.8 mm
◆PCB terminal frontal
◆Angled PCB terminal
VERS IONS ON REQU EST
◆Electrical rating change-over
21 (8) A 250 V~ 25E3
◆Electrical rating normally open and
normally closed 20 A 250 V~ 50E3
◆Electrical rating normally open > 3 mm
10 (10) A 250 V~ 50E3
◆Electrical rating change-over
8 (8) A 250 V~ 50E3
◆For ambient temperatures T 125
◆Change-over with contact gap "3 mm
(series 1005)
◆Normally open with lateral bearing con-
nection (series 1005)
◆Quick-connect 4.8 x 0.5 mm
◆Quick-connect 2.8 x 0.8 mm
◆UL-electrical rating up to
21 A 125 V AC 1 HP
21 A 250 V AC 2 HP
3.18
Electrical rating (depending on version) 21 (8) A 250 V~ 25E3
16 (4) A 400 V~ 50E3
8 (8) A 250 V~ 50E3
21 A 125 VAC 1 HP
21 A 250 VAC 2 HP
Version DIN 41635 A
Actuating force series 1004 0,2 ... 1,8 N
series 1005 1,0 ... 4,2 N
series 1006 0,3 ... 4,2 N
Mechanical life endurance< 3 mm 10E6
"3 mm and lever versions 5E6
Electrical life endurance electrical rating-dependent
Contact resistance (new state) < 100 m#
Insulation resistance (new state) >100 M#(500 V DC between the
open contacts)
High voltage resistance (new state) < 3 mm 750 V (between the
"3 mm 1250 V open contacts)
3750 V (reinforced insulation)
Bounce time < 10 ms
Resistance to tracking PTI 250
Contact gap < 3 mm (µ) or "3 mm
Ambient temperature -40 °C ... +100 °C no condensation
Storage temperature -40 °C ... +80 °C
Flammability housing UL 94 V-0
actuator UL 94 V-0 / V-2
Heat and fire-resistance 850 °C (category D)
Material housing / actuator duroplast or PA
optional actuator chrome-nickel steel
optional actuator roller PA
Contacts Ag/Ag resp. gold-plated
Terminals silver-plated
Solderability of terminals duroplast-housing max. 350 °C, 5 sec.
thermoplast-housing max. 350 °C, 2-3 sec. (no pressure
on the terminals when
soldering by hand)
Approval marks r a
Suitable for appliances of protection class II. Required air and creepage distances
within the appliances have to be observed.
The test conditions comply with EN 61058-1 resp. UL 1054
SERIES 1004 / 1005 / 1006 - ENCLOSED SNAP ACTION SWITCHES
UP TO 21 (8) A 250 V~
3.19
*Version on stock
SERI ES 1 004
with low actuating forces and contact
gap < 3 mm
mov. differential max. 0.3 mm
pre-travel max. 1.8 mm
over-travel min. 0.8 mm
mov. differential max. 0.3 mm
pre-travel max. 1.8 mm
over-travel min. 0.8 mm
Actuating force 1,5 ... 2,5 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
Actuating force 2,4 ... 3,8 N
20 (4) A 400 V~ 10E3
16 (4) A 400 V~ 50E3
10 (6) A 250 V~ 50E3
16 A 125-250 VAC 1/2 HP
Actuating force 0,2 ... 0,6 N
6 (2,5) A 250 V~ 50E3
4 A 125-250 VAC 1/6 HP
Actuating force 0,5 ... 1,1 N
10 (4) A 250 V~ 50E3
8 A 125-250 VAC 1/3 HP
Actuating force 0,8 ... 1,8 N
16 (4) A 250 V~ 25E3
free position
operating pos.
total travel position
allowed
free position
operating pos.
total travel position
allowed
change-over
1005.1001*
1005.0401*
1005.1004*
1005.0404*
SERI ES 1 005
with contact gap < 3 mm
change-over
1004.1002*
1004.0402
1004.1001*
1004.3503
normally open
1005.1201*
1005.4001
normally closed
1005.1101
mov. differential max. 1.2 mm
pre-travel max. 1.9 mm
over-travel min. 0.7 mm
mov. differential max. 1.0 mm
pre-travel max. 1.8 mm
over-travel min. 0.8 mm
Actuating force 2,4 ... 3,8 N
10 (6) A 250 V~ 50E3
10 A 125-250 VAC 1/2 HP
Actuating force 2,6 ... 4,2 N
10 (6) A 250 V~ 50E3
10 A 125-250 VAC 1/2 HP
free position
operating pos.
total travel position
allowed
free position
operating pos.
total travel position
allowed
SERI ES 1 005
with contact gap "3 mm
normally open
1005.1204*
1005.0904
normally closed
1005.1105*
3.20 *Version on stock
SERIES 1004 / 1005 / 1006 - ENCLOSED SNAP ACTION SWITCHES
UP TO 21 (8) A 250 V~
mov. differential max. 0.3 mm
pre-travel max. 1.8 mm
over-travel min. 0.8 mm
mov. differential max. 1.8 mm
pre-travel max. 8.5 mm
over-travel min. 3.2 mm
actuating force 0,30 ... 0,55 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
mov. differential max. 0.7 mm
pre-travel max. 4.0 mm
over-travel min. 1.6 mm
actuating force 0,8 ... 1,4 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
free position
operating pos.
total travel pos. allowed
free position
operating pos.
total travel pos.
allowed
free position
operating pos.
total travel pos.
allowed
SERI ES 1 006
with straight metal lever
contact gap < 3 mm
change-over
1006.1101
change-over
1006.1301*
change-over
1006.1401*
1006.0901
actuating force 1,5 ... 2,5 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
mov. differential max. 0.3 mm
pre-travel max. 1.8 mm
over-travel min. 0.8 mm
34
! 23,5
20.8
±1,2
18
Ø 5
mov. differential max. 0.9 mm
pre-travel max. 3.9 mm
over-travel min. 1.6 mm
actuating force 0,7 ... 1,25 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
free position
operating pos.
total travel pos. allowed
change-over
1006.1201*
1006.0701*
change-over
1006.1511*
1006.1011*
actuating force 1,5 ... 2,5 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
versions with 16 A or contact gap "3 mm
on request.
free position
operating pos.
total travel pos.
allowed
3.21
*Version on stock
quick-connect solder terminal
angled PCB-terminal to
cover side (right)
angled PCB-terminal to
socket side (left)
mov. differential max. 0,6 mm
pre-travel max. 3,5 mm
over-travel min. 1,0 mm
+ 1,5 mm with elastic
hysteresis
free position
operating pos.
total travel pos. allowed
SERI ES 1 006
with metal spring actuator
contact gap < 3 mm
The spring actuator allows a recoil of 1.5
mm
change-over
1006.1801*
actuating force 1,50 ... 2,50 N
6 (2,5) A 400 V~ 50E3
10 (4) A 400 V~ 10E3
10 A 125-250 VAC 1/4 HP
DIME NSIO NED DRAWINGS
for solder terminal
thickness 0.5 mm 231 009 011*
thickness 0.8 mm 231 009 021*
for quick-connect
thickness 0.5 mm 231 010 011*
thickness 0.8 mm 231 010 021*
INSU LAT ING PLAT ES
made of hard paper HP 2061 for
mounting on metal or between
stackable switches
