B0530WS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features * * * * * * * Mechanical Data Low Forward Voltage Drop Guard Ring Construction for Transient Protection High Conductance Totally Lead-Free Finish & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) * * * * * * Case: SOD323 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Lead Free Plating (Matte Tin Finish Annealed over Alloy 42 Leadframe). Solderable per MIL-STD-202, Method 208 e3 Polarity: Cathode Band Weight: 0.004 grams (Approximate) SOD323 Top View Ordering Information (Note 5) Part Number B0530WS-7-F B0530WS-13-F B0530WSQ-13-F Notes: Compliance AEC-Q101 AEC-Q101 Automotive Case SOD323 SOD323 SOD323 Packaging 3,000/Tape & Reel 10,000/Tape & Reel 10,000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http"//www.diodes.com/products/packages.html. Marking Information SOD323 SE B0530WS Document number: DS30249 Rev. 15 - 2 SE = Product Type Marking Code 1 of 5 www.diodes.com February 2015 (c) Diodes Incorporated B0530WS Maximum Ratings (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 30 V VR(RMS) 21 V IO 0.5 A Peak Repetitive Forward Current tp = 8.3ms, Half Sine-Wave IFRM 3.5 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 2 A Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Thermal Characteristics Characteristic Power Dissipation (Note 6) PD 235 mW RJA 426 C/W TJ, TSTG -40 to +125 C Typical Thermal Resistance Junction to Ambient (Note 6) Operating and Storage Temperature Range Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit V(BR)R 30 V IR = 500A Forward Voltage Drop VF 0.40 0.36 0.45 V IF = 0.1A IF = 0.5A Leakage Current (Note 7) IR 80 100 500 A VR = 15V VR = 20V VR = 30V Total Capacitance CT 58 pF f = 1MHz, VR = 0V DC Reverse Breakdown Voltage (Note 7) Notes: Test Conditions 6. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 7. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) 240 PD, POWER DISSIPATION (mW) 210 180 150 120 90 60 30 10 1 TA = 125C TA = 100C 0.1 TA = 75C TA = 25C 0.01 TA = 0C TA = -65C 0.001 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Document number: DS30249 Rev. 15 - 2 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation B0530WS 0 2 of 5 www.diodes.com February 2015 (c) Diodes Incorporated B0530WS 10,000 70 TA = 125C f = 1MHz 1,000 60 CT, TOTAL CAPACITANCE (pF) TA = 100C TA = 75C 100 TA = 25C 10 1 TA = 0C 0.1 TA = -65C 0.01 50 40 30 20 10 0.001 0 10 20 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0 0 10 5 15 20 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 0.8 IF, DC FORWARD CURRENT (A) 0.7 Note 5 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 TT, TERMINAL TEMPERATURE (C) Fig. 5 Forward Current Derating Curve B0530WS Document number: DS30249 Rev. 15 - 2 150 3 of 5 www.diodes.com February 2015 (c) Diodes Incorporated B0530WS Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A2 c SOD323 Dim Min Max Typ A1 -0.10 0.05 A2 1.00 1.10 1.05 b 0.25 0.35 0.30 c 0.10 0.15 0.11 D 1.20 1.40 1.30 E 1.60 1.80 1.70 He 2.30 2.70 2.50 L 0.20 0.40 0.30 a 8 All Dimensions in mm a L He E A1 b D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Dimensions Value (in mm) X 0.590 X1 2.700 Y 0.450 Y X B0530WS Document number: DS30249 Rev. 15 - 2 4 of 5 www.diodes.com February 2015 (c) Diodes Incorporated B0530WS IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com B0530WS Document number: DS30249 Rev. 15 - 2 5 of 5 www.diodes.com February 2015 (c) Diodes Incorporated