Smart Vision Sensors ZFV ZFV Color Series Ordering Information Models Sensor Heads Appearance Type Narrow View Setting distance 34 to 49 mm (variable) Sensing area 5 x 4.6 mm to 9 x 8.3 mm (variable) ZFV-SC10 Model Standard View 31 to 187 mm (variable) 10 x 9.2 mm to 50 x 46 mm (variable) ZFV-SC50 Wide View 66 to 141 mm (variable) 50 x 46 mm to 90 x 83 mm (variable) ZFV-SC90 Ultra-wide View 114 to 226 mm (variable) 90 x 83 mm to 150 x 138 mm (variable) ZFV-SC150 Amplifier Units ZFV Color Series Appearance Power supply Output type Model NPN ZFV-CA40 PNP ZFV-CA45 24 VDC Accessories ZFV Color Series (order separately) Data Storage Units Appearance Power supply 24 VDC Sensor Head Extension Cable Output type Model NPN ZS-DSU11 PNP ZS-DSU41 Panel-mounting Adapter Controller Link Unit Appearance Cable length Model 3m ZFV-XC3B *1 8m ZFV-XC8B *1. ZFV-XC3BR Robot Cable is also available. Appearance Model ZS-XCN Model ZS-XOM1 First Unit ZS-XPM2 Additional Units (for expansion) External Lighting Type Bar Lighting Bar Double Lighting Bar Low-angle Lighting Light Source for Through-beam Lighting ZFV Model ZFV-LTL01 ZFV-LTL02 ZFV-LTL04 ZFV-LTF01 C-1 Specifications Sensor Heads Item Setting distance (L) Detection range (H x V) Detection range ZFV-SC10 (Narrow View) 34 to 49 mm (variable) 5 x 4.6 mm to 9 x 8.3 mm (variable) ZFV-SC50/SC50W (Standard View) 31 to 187 mm (variable) Setting distance (L) Setting distance (L) 10 x 9.2 mm to 50 x 46 mm (variable) ZFV-SC90/SC90W (Wide View) ZFV-SC150/SC150W (Ultra Wide View) 67 to 142 mm (variable) 115 to 227 mm (variable) 50 x 46 mm to 90 x 83 mm (variable) 90x 83 mm to 150 x 138 mm (variable) 227 mm (V) (H) Relation between setting distance and detection range 49 mm 187 mm 142 mm 34 mm 31 mm 67 mm 5 mm 9 mm Detection range(H) Built-in lens Object lighting method Object light source Lightning I/F (Option) Sensing element Shutter Power supply voltage Current consumption Dielectric strength Vibration resistance (destructive) Shock resistance (destructive) Ambient temperature Ambient humidity Ambient atmosphere Connection type Degree of protection (IEC 60529) Material Weight Accessories LED class *1 *1. 10 mm 50 mm Detection range (H) 115 mm 50 mm 90 mm 90 mm Detection range (H) 150 mm Detection range (H) Focus: f13.47 Focus: f6.1 Focus: f15.65 Pulse lighting 8 white LEDs 36 LEDs 20 white LEDs 72 white LEDs None Yes None 1/3-inch CCD Electronic shutter, shutter time: 1/500 to 1/8,000 15 VDC (Supplied from 15 VDC, 48 VDC (Supplied from Amplifier Unit.) Amplifier Unit.) Approx. 200 mA Approx. 350 mA [15 V: approx. 150 mA, 48 V: approx. 200 mA] (Including the current consumed when external light is connected) 1,000 VAC, 50/60 Hz for 1 min 10 to 150 Hz, 0.35 mm single amplitude, 10 times each in X, Y, and Z directions for 8 min 150 m/s2, three times each in six directions (up/down, left/right, forward/backward) Operating: 0 to +40 C, Storage: -25 to +65 C (with no icing or condensation) Operating and storage: 35% to 85% (with no condensation) Must be free of corrosive gas. Prewired, Standard cable length: 2 m IP65 ZFV-SC___: IP65 ZFV-SC___W: IP67 Case: ABS, Mounting bracket: PBT Approx. 300 g Approx. 270 g Approx. 200 g (including mounting bracket (including mounting bracket (including mounting bracket and cord; packaged and cord; packaged and cord; packaged condition: approx. 380 g) condition: approx. 350 g) condition: approx. 300 g) Mounting bracket Mounting bracket Mounting bracket ZFV-XMF2 (1), ZFV-XMF2 (1), ZFV-XMF (1), Ferrite core (2), Ferrite core (2), Ferrite core (1), Warning label (1) Warning label (1) Instruction sheet Instruction sheet Instruction sheet Class 1 Class 2 Class 2 Approx. 600 g (including mounting bracket and cord; packaged condition: approx. 780 g) Ferrite core (2), Instruction sheet Class 1 Applicable standards: IEC60825-1: 1993 +A1:1997 +A2:2001, EN60825-1:1994 +A:2002 +A:2001 C-2 Vision Systems Amplifier Units Item Output specifications Input specifications ON OFF Serial I/O USB2.0 RS-232C Inspection items Teaching area Teaching area size Sensing area Resolution Bank switching Image input interval Other functions Output signals Input signals ZFV-CA40 NPN open collector, 30 VDC 50 mA max., residual voltage 1.2 V max. Short-circuited with 0 V terminal or 1.5 V or less ZFV-CA45 PNP open collector, 50 mA max., residual voltage 1.2 V max. Supply voltage short-circuited or within supply voltage -1.5 V max. 1 port, full-speed (12 Mbps) MINI-B 1 port, 115,200 bps max. PATTERN, AREA, HUE (Color), WIDTH, POSITION, COUNT, BRIGHT, CHARA Rectangular, one area * PATTERN, BRIGHT: Any rectangular area (256 x 256 max.) * AREA, HUE (Color), WIDTH, POSITION, COUNT, CHARA: Any rectangular area (full screen max.) Full screen 468 x 432 (H x V) max. Supported for 8 banks. 13 ms (Standard), 8 ms (1/2 for partial scan), 5 ms (1/4 for partial scan) Control output switching: ON for OK / ON for NG, ON delay / OFF delay, One-shot output, "ECO" mode (1) Control output (OUTPUT) (2) Enable output (ENABLE) (3) Error output (ERROR) (1) Sync measurement input (TRIG)/Continuous measurement input (TRIG); switched by menu Sensor head interface Image display Indicators ZFV (2) Bank selection inputs (BANK1-3) (3) Workpiece still teaching (TEACH)/ Workpiece moving teaching (TEACH); switched by menu Digital interface 1.8 inch TFT ccolor LCD (Display dots: 557 x 234 pix) * Judgment result indicator (OUTPUT, Color: orange) * Inspection mode indicator (RUN, Color: green) * Error indicator (ERR, Color: red) Operation interface * Ready status indicator (READY, Color: blue) * Cursor keys (up, down, left, right) * Setting key (SET) * Escape key (ESC) * Operating mode switching (slide switch) * Menu switching (slide switch) * Teaching/Display switching key (TEACH/VIEW) Power supply voltage Current consumption Dielectric strength Noise resistance Vibration resistance (destructive) Shock resistance (destructive) Ambient temperature range Ambient humidity range Ambient atmosphere Degree of protection Material Weight Accessories ZFV * Function keys (A to D 4 input) 20.4 to 26.4 VDC (including ripple) 800 mA max. (with Sensor Head connected) 1,000 VAC, 50/60 Hz for 1 min between leads and Amplifier Unit case 1 kV, Pulse rise: 5 ns, Pulse width: 50 ns, Burst duration: 15 ms, Cycle: 300 ms 10 to 150 Hz, 0.1 mm single amplitude, 10 times each in X, Y, and Z directions for 8 min 150 m/s2, three times each in six directions (up/down, left/right, forward/backward) Operating: 0 to 50 C Storage: -25 to 65 C (with no icing or condensation) Operating and storage: 35% to 85% (with no condensation) Must be free of corrosive gas. IEC 60529, IP20 Polycarbonate (PC) Approx. 300 g (including cord; packaged condition: 450 g) Ferrite core (1), Instruction sheet, Label (1) C-3 External light units (optional) Item Applicable sensor head Lighting method Lighting interval Light source (Qty.) Power supply voltage Current consumption Dielectric strength Vibration resistance (destructive) Shock resistance (destructive) Ambient temperature Ambient humidity Ambient atmosphere Connection type Degree of protection Material Weight LED class C-4 ZFV-LTF01 ZFV-LT01 ZFV-LTL01 ZFV-LTL04 ZFV-SC50/SC50W/SC90/SC90W Pulse lighting Fixed (1.1 to 1.4 ms) White LEDs 60 20 40 80 48 VDC (Supplied from sensor head) Appprox. 160 mA Appprox. 80 mA Appprox. 120 mA Appprox. 210 mA 300 VAC, 50/60 Hz for 1 min 10 to 150 Hz, 0.35 mm single amplitude, 10 times each in X, Y and Z directions for 8 min 150 m/s2, 3 times each in six directions (up/down, left/right, forward/backward) Operating: 0 to 40 C Storage: -20 to 65 C (with no icing or condensation) Operating and storage: 35% to 85% RH (with no condensation) Must be free of corrosive gas Prewired, Standard cable length: 2 m IEC6D529 IP20 SPCC SPCC, aluminium Approx. 500 g (when Approx. 250 g (when Approx. 650 g (when packaged: Approx. 550 g) packaged: Approx. 300 g) packaged: Approx. 900 g) Class 1 Applicable standards IEC6D825-1: 1993 +A1:1997 +A2:2001 EN60825-1: 1994 +A1:2002 +A2:2001 Approx. 900 g (when packaged: Approx. 1,150 g) Vision Systems Dimensions (Units: mm) Sensor Heads 1/4-20UNC Depth: 6 34 20 18.7 33.6 ZFV-SC10 (Narrow view) 34 Two, M4 Depth: 6 Connector 30.10 Mounting Hole Dimensions 200.1 Two, M4 Mounting Bracket can be attached to any side. 67.90 32 4.5 4.5 0.80 33 5.6 Focus adjustment dial 17.90 30 (6.36) 30 8.50 6.36 4 Optical axis ZFV-SC50/SC50W (Standard view) 34 20 1/4-UNC Depth: 6 ZFV 23.30 12.8 dia. 33.6 4.5 4.5 32 Heat-resistive vinyl-insulated cable 5.8 dia, standard length: 2 m 34 38.9 26.5 30.1 Mounting Hole Dimensions 34 Two, M4 Depth: 6 Two, M4 Mounting Bracket can be attached to any side. 200.1 52.5 39 86 26.5 Heat-resistive vinyl-insulated cable 6.2 dia, standard length: 2 m 5.6 52.5 6.2 dia. 35.2 (6.36) 3 (6.36) 8 35.5 8.5 5 9.8 30.3 ZFV-SC90/SC90W (Wide view) 33 1/4-20UNC Depth 6 34 20 30.1 38.9 34 2-M4 Depth 6 33 20 0.1 2- M 4 Mounting hole dimensions 83.7 35.5 33 5.6 30.25 52.5 ZFV A mounting bracket can be mounted to each side 8.5 8.5 52.5 39 35.5 4 6.2 9.8 8.5 7 Heat-resistant PVC shielded cable 6.2 Standard length 2 m C-5 ZFV-SC150/SC150W (Ultra wide view) 110.2 59.5 140 29 12 35 Heat-resistant PVC shielded cable 6.2 Standard length 2 m 57 8.5 8.5 73.2 140 4 8.5 5 7 8.5 33 Mounting surface 98 2-M4 20 0.1 Mounting hole dimensions Amplifier Units ZFV-CA4@ 23.2 52.50 60 4.61 90 4.30 3.90 10.80 13 10 32.90 24.20 18 11.7 dia. C-6 Vision Systems External light units (optional) ZFV-LTL01 (bar lighting) 20 62 2 x 3-M3 Depth 5 P5.8 x 9 = 52.2 37.4 8 0.1 14 8 29 +100 0 2000 10.7 20 0.1 Mounting hole dimensions 20 69 0.1 2-M3 Depth 5 Mounting hole dimensions ZFV 69 74 ZFV-LTL02 (bar double-lighting) 33 4-M4 (Thru) 140 90 59.9 20 350 +35 0 3.2 100 140 165.4 85 85 20 20 P5.8 x 9 = 52.2 62 20 100 20 2000+100 0 100 0.1 100 0.1 Mounting hole dimensions ZFV C-7 ZFV-LTL04 (bar low-angle lighting) 4-M4(Thru) 165.4 140 33 3.2 59.9 350 +35 0 20 90 62 100 140 P5.8 x 9 = 52.2 20 165.4 85 85 20 20 100 20 +100 0 2000 100 0.1 100 0.1 Mounting hole dimensions ZFV-LTF01 (light source for through-beam lighting) 1 103 70 22 74 74 0 0 2000 +10 70 (Emitting surface) 109 (Emitting surface) 4-M3 Depth 8 74 0.1 74 0.1 Mounting hole dimensions C-8 Vision Systems About the I/O cable The following shows the leads that comprise the I/O cable. Brown (1) Power supply Blue (2) GND Black (3) OUTPUT* Orange (4) ENABLE Light blue(5) ERROR Yellow (6) TEACH* Pink (7) TRIG* Gray (8) BANK1* Green (9) BANK2* Red (10) BANK3* Purple Unused White Unused * : Enabled only in the RUN mode Power Supply This connects the power supply. Use a DC power supply with safe extra-low-voltage circuits to prevent high voltage. Wire the power supply separately from other devices. Wiring them together or placing them in the same duct may cause induction, resulting in malfunction or damage. (2) GND The GND terminal is the 0 V power supply terminal. (3) OUTPUT (control output) This outputs judgment results. This lead is interlocked with OUTPUT LED. (4) ENABLE (enable output) This turns ON when error is generated. This leads is interlocked with ERR LED. (5) ERROR (error output) This turns ON when an error is generated. This lead is interlocked with ERR LED. (6) TEACH (teching output) There are two teaching modes, workpiece stop teaching and workpiece move teaching. These teaching modes can be selected in the menu. (7) TRIG (measurement trigger input) There are two measurement modes, synchronus measurement and continuos measurement. Which mode of measurement is to be performed in is selected in the menu. ZFV (1) (8) BANK1 (bank swichting input 1) (9) BANK2 (bank swichting input 2) (10) BANK3 (bank swichting input 3) The bank No. can be switched when the BANK1 to BANK3 are connected as follows . Bank No. BANK1 BANK2 BANK3 BANK4 BANK5 BANK6 BANK7 BANK8 ZFV BANK1 OFF ON OFF ON OFF ON OFF ON BANK2 OFF OFF ON ON OFF OFF ON ON BANK3 OFF OFF OFF OFF ON ON ON ON C-9 I/O Circuit diagrams NPN output type (ZFV-CA40) Brown Power supply (24VDC) Load Black OUTPUT Orange ENABLE Load Load Internal circuits Light blue ERROR 24VDC Blue GND(0V) Yellow TEACH Pink TRIG Gray BANK1 Green BANK2 Red BANK3 Brown Power supply (24VDC) Yellow TEACH Pink TRIG Gray BANK1 Green BANK2 Red BANK3 Blue GND(0V) Internal circuits PNP output type (ZFV-CA45) Light blue ERROR Orange ENABLE Black OUTPUT 24VDC Load Load Load C-10 Vision Systems Timing Charts The following shows the timing charts when communication is performed with external devices. Measurement Continuos measurement Measurement is performed continuosly for the duration that the TRIG signal is ON. The measurement result is updated and output to external deveices at each measurement cycle. TRIG OFF ON OUTPUT OFF ON ENABLE OFF ON Tout Tout: Measurement cycle The measurement cycle changes depending on the setting. Synchronuos measurement TRIG OFF ON OUTPUT OFF ON ENABLE OFF ON Tout ZFV Measurement is performed only once in synchrnous with the change in TRIG signal state from OFF to ON and the result is output. Tout: Measurement time. The measurement time changes depending on the setting. * The minimum ON time width of the TRIG signal is 1 ms. * The OUTPUT signal is helad until the measurement result is updated. Note: However, when one-shot is set, the OUTPUT signal is held for the preset time. ZFV C-11 Teaching Workpiece stop teaching Teaching processing is performed according to TRIG signal input after the TEACH signal input. Measurement is not performed while teaching is being performed. Do not move the workpiece until teaching is completed. TEACH OFF ON TRIG OFF ON ENABLE OFF ON ERROR OFF ON (1) (2) (3) (4) (5) (6) (7) (8) (1) (8) (4) (2) During teaching processing (5) (6) (7) Turn the TEACH signal ON. Confirm that the ENABLE signal has turned OFF. Make sure that the workpiece to be taught is in the teaching area. Input the TRIG signal. The ENABLE signal turns ON after teaching is completed. At this timing, check the state of the ERROR signal. When teaching has been completed successfully, the ERROR signal stays OFF. When teaching fails, the ERROR signal turns ON. Turn the TEACH signal OFF and end teaching processing. When teaching fails, the state before teaching was initiated is returned to. Performe teaching again. If the TEACH signal is turned OFF midway, teaching is disabled. Workpiece move teaching Use this teaching mode when the object cannot be stopped. Teaching processing is divided up and performed in synchronous with the TRIG signal input after the TEACH signal is input. Teaching must be processewd eight times. Measurement is not performed while teaching is being performed. TEACH OFF ON TRIG OFF ON ENABLE ERROR (1) (2) (3) (4) (5) (6) (7) (8) OFF ON OFF ON Min.150ms (1) (8) (3) (2) (4) During teaching processing (5) (6) (7) Turn the TEACH signal ON from the outside. Confirm that the ENABLE signal has turned OFF. Input the TRIG signal at the timing for measuring the workpiece to be taught. Repeat the input in step (3) eight times. (Trigger inputs from the ninth time onwars are ignored.) The ENABLE signal turns ON after teaching is completed. Check the state of the ERROR signal at this timing. When teaching has been completed successfully, the ERROR signal stays OFF. When teaching fails, the ERROR signal turns ON. Turn the TEACH signal OFF and end teaching processing. When teaching fails, the state before teaching was initiated is return to. Perform teaching again. If the TEACH signal is turned OFF midway, teaching is disabled. Cat. No. E373-E2-01-X C-12 In the interest of product improvement, specifications are subject to change without notice. Vision Systems Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://oeweb.omron.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. &RPSOHWH|7HUPVDQG&RQGLWLRQVRI6DOHIRUSURGXFWSXUFKDVHDQGXVHDUHRQ2PURQ(c)VZHEVLWH DWZZZRPURQFRPRHLXQGHUWKH|$ERXW8VWDELQWKH/HJDO0DWWHUVVHFWLRQ $//',0(16,2166+2:1$5(,10,//,0(7(56 7RFRQYHUWPLOOLPHWHUVLQWRLQFKHVPXOWLSO\E\7RFRQYHUWJUDPVLQWRRXQFHVPXOWLSO\E\ 20521(/(&7521,&6//& 20521&$1$'$,1& 2QH&RPPHUFH'ULYH 6FKDXPEXUJ,/ )RU86WHFKQLFDOVXSSRUWRURWKHULQTXLULHV 0LOQHU$YHQXH 7RURQWR2QWDULR0%9 2052121/,1( *OREDOKWWSZZZRPURQFRP 86$KWWSZZZRPURQFRPRHL &DQDGDKWWSZZZRPURQFD Cat. No. E373-E2-01 8/06 Specifications subject to change without notice Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: ZS-XCN ZFV-LTL02 ZFV-CA40 ZFV-SC10 ZFV-XC3BV2 ZFV-SC50 ZFV-SC50W ZFV-CA45 ZFV-SC150 ZFVSC150W ZFV-SC90 ZFV-XC8BV2 ZFV-LTL04 ZFV-LTF01 ZFV-LTL01 ZFV-XC3BRV2 ZFV-SC90W