UNCONTROLLED DOCUMENT | 0.80 [0.031] | } ro. pas) ~| 1.10 [0.043] 1.20 [0.047] -| a a = 0.25 [0.010] 0.50 [0.020] 1,10 [0.043] MAX, 0.30 [0.012] 4,00 [0.157] 2.00 [0.0791|+ [ 1.60 [0.063] | \ ANODE MARK J $1.55 [40.061] 8.00 [0,315] ry rt fi fe + TOP TAPE S TAPE FEED DIRECTION *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X=1 (40.039), XX=20.5 (40.020), XXX=20.25 (40.010), X.XXX=:0.127 (40.005). LEAD SIZE=+0.05 (0.002), LEAD LENGTH=20.75 (0.030). MIN= 1.75 [0.069] 4,00 [0.157] PART NUMBER SMLLXFMO60S3SICTR D REV. 3.50 [0.138] REV. | E.C.N. NUMBER AND REVISION COMMENTS DATE A | E.C.N. #10967. 3.14.03 B | ECN. #11148. 3.1.05 TOP VIEW POLARITY Cc E.C.N. #11304. 1.26.06 D | EC.N. #11508. 8.28.14 ANODE oD+ CATHODE ELECTRO-OPTICAL CHARACTERISTICS Ta=25'C [f= 20mA PARAMETER MIN TYP MAX UNITS _ TEST COND PEAK WAVELENGTH 636 nm FORWARD VOLTAGE 2.0 2.6 VF REVERSE VOLTAGE 5.0 Vr Lp=100yA AXIAL INTENSITY 150 med [f= 20mA LEAD FREE REFLOW PROFILE VIEWING ANGLE 120 2x theta 10 SEC. MAX. EMITTED COLOR: RED 255 EPOXY LENS FINISH: WATER CLEAR S w Tey LIMITS OF SAFE OPERATION AT 25C E PARAMETER MAX UNITS 5 PEAK FORWARD CURRENT* 150 mA a STEADY CURRENT 30 mA 95 POWER DISSIPATION 105 mW Lo DERATE FROM 25C =12 mw/"C 0 TIME OPERATING TEMP. -40 TO +85 C STORAGE TEMP. -40 TO +100 C TOTAL TIME ABOVE 220C IS 60 SECONDS MAX. * t<10yS RECOMMENDED SOLDER PAD LAYOUT NOTES: | 1. THE CATHODE IS ORIENTED TOWARDS THE JL 0.80 [0.031] TAPE SPROCKET HOLE. | 0.80 10.0313 (Al [ CAUTION: MOISTURE SENSITIVE DEVICE (6) 0.85 [0.033] (2 PLS) PER JEDEC LEVEL 3 STANDARDS UNCONTROLLED DOCUMENT TREGMAL PRECISION yay = +0.00 DECIMAL PRECISION REV. PART NUMBER D SMLLXFMO60SSICTR 1.6mm x 0.8mm SURFACE MOUNT LED, 636nm SUPER HIGH INTENSITY RED LED, WATER CLEAR LENS, TAPE AND REEL. CONFIDENTIAL INFORMATION THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. RELIABILITY NOTE OUR MANY YEARS OF EXPERIENCE DATA ACCUMULATION INDICATE THAT SOLDER HEAT IS A MAJOR CAUSE OF EARLY AND FUTURE FAILURE. PLEASE PAY ATTENTION TO YOUR SOLDERING PROCESS. (Creating LED and LCD Solutions Together Ss PALATINE, 290 E. HELEN ROAD IL 60067-6976 PHONE: +1.847.359.2790 US WEB: www.lumex.com TW WEB: www.lumex.com.tw DRAWN BY: cT CHECKED BY: APPROVED BY:|DATE: 1.9.01 PAGE: 1 OF 1 SCALE: N/A