KINGSTON.COM Kingston I-Temp DDR3/3L DRAM for embedded applications Kingston DDR3/3L Overview Ideal for embedded applications, Kingston's I-Temp DRAM meets industrial operating temperature requirements (-40C~+95C) which makes it suitable for outdoor and harsh environments. It supports both low (1.35V) and standard (1.5V) voltage for design flexibility. DDR3/3L Part Numbers and Specifications I-Temp 30nm DDR3/3L PN Capacity Description Package Size Configuration (words x bits) Speed VDD, VDDQ Operating Temperature D2516EC4BXGGBI 4Gb 96 ball FBGA DDR3/3L I-Temp 9.0x13.5x1.2 256Mx16 1600 Mbps 1.35V* -40C~+95C D5128EC4BPGGBUI 4Gb 78 ball FBGA DDR3/3L I-Temp 9.0x10.6x1.2 512Mx8 1600 Mbps 1.35V* -40C~+95C D2516ECMDXGJDI 4Gb 96 ball FBGA DDR3L I-Temp 7.5x13.5x1.2 256Mx16 1866 Mbps 1.35V* -40C~+95C D5128ECMDPGJDI 4Gb 78 ball FBGA DDR3L I-Temp 7.5x10.6x1.2 512Mx8 1866 Mbps 1.35V* -40C~+95C *Backward compatible to 1.5V VDD, VDDQ Key Features * Double-data-rate architecture: two data transfers per clock cycle * High-speed data transfer is realized by 8 bits prefetch pipelined architecture * Bi-directional differential data strobe (DOS and /DQS) is transmitted/received with data for capturing data at the receiver * DOS is edge-aligned with data for READS; center-aligned with data for WRITES * Differential clock inputs (CK and /CK) * DLL aligns DQ and DOS transitions with CK transitions * Commands entered on each positive CK edge; data and data mask referenced to both edges of DQS * Data mask (DM) for write data * Posted /CAS by programmable additive latency for better command and data bus efficiency * On-Die Termination (ODD for better signal quality) -- Synchronous ODT -- Dynamic CDT -- Asynchronous ODT * Multi Purpose Register (MPR) for pre-defined pattern read out * ZQ calibration for DO drive and ODT * Programmable Partial Array Self-Refresh (PASR) * RESET pin for Power-up sequence and reset function * SRT range: Normal/extended * Programmable Output driver impedance control THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE (c)2018 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. MKF-623.1US