FP001P620KG6206B8 - Vishay Presicion Group

FP..P

www.vishay.com Vishay Dale

Revision: 07-Dec-11 1Document Number: 31030

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Metal Film Resistors, Pulse Withstanding Protective

FEATURES

• Special Vishay Dale design provides lightning

withstand characteristics along with resistor

functionality

• A thicker tin oxide power film system provides

lightning surge absorption capabilities

• Higher turns ratio and glass substrate provide

sharper fusing characteristic than the standard

flameproof product line

• Protect against a variety of electrical hazards which can

change or destroy sensitive electronic equipment

including high energy voltage surges caused by power line

anomalies (direct power crosses or inductively coupled

effects) and other momentary overvoltages

• Compliant to RoHS Directive 2002/95/EC

Note

*Pb containing terminations are not RoHS compliant, exemptions

may apply

Note

(1) Pulse withstanding capabilities are value dependent. Values above the cutoff value will meet all of the surge test requirements shown on the

following pages.

Note

(2) Some packaging codes are model specific.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

HISTORICAL

MODEL

POWER RATING

P70 °C

RESISTANCE

RANGE

TOLERANCE

± % CUTOFF VALUE (1)

FP1/2P FP1/2P 0.5 10 to 1M 1, 2, 5 2K00

FP001P FP1P 1 10 to 1M 1, 2, 5 1K00

FP002P FP2P 2 355 to 125K 1, 2, 5 355R

FP003P FP3P 3 46.4 to 125K 1, 2, 5 250R

FP069P FP69P 2 25 to 126K 1, 2, 5 400R

MARKING

- DALE

- Value

- Tolerance

- Style and case size

- Date code (year/week)

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: FP002P1K00F9256B8 (preferred part numbering format)

GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE SPEC CODES PACKAGING (2)

(See Standard

Electrical

Specifications

table)

R = Ω

K = kΩ

M = MΩ

10R0 = 10 Ω

1K30 = 1.3 kΩ

1M00 = 1.0 MΩ

F = ± 1 %

G = ± 2 %

J = ± 5 %

5555 = FP1/2P

6206 = FP001P

9256 = FP002P

9303 = FP003P

7532 = FP069P

EK = Lead (Pb)-free, strip

EA = Lead (Pb)-free, T/R

B8 = Tin/lead, strip

CH = Tin/lead, T/R (750 pieces)

CJ = Tin/lead, T/R (1000 pieces)

Historical Part Number: FP2P 1K00 1 % B8 (will continue to be accepted)

FP2P 1K00 1 % B8

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

02P1 0 F9KP0 56B2F 80

FP..P

www.vishay.com Vishay Dale

Revision: 07-Dec-11 2Document Number: 31030

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches (millimeters)

GLOBAL

MODEL AB D

FP1/2P 0.360 ± 0.020 (9.14 ± 0.51) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 ± 0.002 (0.81 ± 0.05)

FP001P 0.560 ± 0.031 (14.22 ± 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 ± 0.002 (0.81 ± 0.05)

FP002P 0.687 ± 0.031 (17.45 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP003P 0.900 ± 0.055 (22.86 ± 1.40) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP069P 0.516 ± 0.021 (13.11 ± 0.53) 0.225 ± 0.012 (5.72 ± 0.31) 0.032 ± 0.002 (0.81 ± 0.05)

1.500 ± 0.125

(38.10 ± 3.18)

120

100

0 50 100 150 200 250 300

DERATING

FP1/2P

FP001P, FP002P, FP003P

% OF RATED POWER

AMBIENT TEMPERATURE °C

120

100

0 50 100 150 200 250 300

DERATING

3 W

2 W

FP069P

0.6 W

+ 70 °C

+ 25 °C

AMBIENT TEMPERATURE °C

% OF RATED POWER

FP..P

www.vishay.com Vishay Dale

Revision: 07-Dec-11 3Document Number: 31030

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

LIGHTNING PULSE WAVE FORMS

Lightning pulse wave forms are defined by three numbers:

• Maximum time to reach peak voltage level (typically 10 μs)

• Minimum time for voltage to decrease to half value

• The peak voltage level

Three examples are shown below.

10 by 560 V to 800 V FCC - Metallic Surge

10 by 1000 V to 1000 V REA - Current Surge

10 by 160 V to 1500 V FCC - Longitudinal Surge

VOLTS

µs

400

800

1200

1600

200 600 1000

VOLTS

µs

400

800

1200

1600

200 600 1000

µs

400

800

1200

1600

200 600 1000

FP..P

www.vishay.com Vishay Dale

Revision: 07-Dec-11 4Document Number: 31030

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

These graphs show the relationship value and pulse withstanding voltage for FP1/2P thru FP003P using a 1.0 % resistance shift

after 10 pulses as the figure of merit. The stable operating region of each package is on the right side of the appropriate line.

PACKAGING

GLOBAL MODEL PACKAGING TYPE PACKAGING CODE

LEAD (Pb)-BEARING LEAD (Pb)-FREE

FP1/2P, FP001P, FP069P Strip B8 EK

Tape/reel CJ EA

FP002P, FP003P Strip B8 EK

Tape/reel CH EA

FP069P

FP002PFP003P FP001P

FP1/2P

(1500 µ at 2 kΩ)

10 x 160 µs

VOLTS

1750

1500

1250

1000

750

500

250

0100 300

FP003P

FP002P

FP069P

FP001P

FP1/2P

RESISTANCE (Ω)

FP002P FP069P FP001P

FP1/2P

VOLTS

RESISTANCE (Ω)

500 700 900 100 300 500 700 900

1750

1500

1250

1000

750

500

250

10 x 560 µs

10 x 1000 µs

100 300 500 700 900

1750

1500

1250

1000

750

500

250

FP003P

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.