DATASHEET Part No. 1004138 Product: GPS Ceramic Patch Antenna with LNA Part No. 1004138 GPS Ceramic Patch Antenna with LNA 1.575 GHz Supports: Tracking, Smart Home, Agriculture, Automotive, Healthcare, Digital Signage, Wearables, Industrial Devices Ethertronics' antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for GPS enabled handheld devices, media players and other mobile communications devices. GPS active patch antenna solution utilizes a Low Noise Amplifier (LNA) mounted on a PCB for superior performance. GPS Ceramic Patch Antenna with LNA Electrical Specifications Typical characteristics in free-space Frequency 1.575 GHz Center Frequency f KEY BENEFITS Reduced Costs & Time-to-Market Standard antennas eliminate design fees, redesign cycle time and minimize risk associated with customer solution. Quicker time to market. Quicker Time-to-Market By optimizing antenna size, performance and emissions, customer and regulatory specifications are more easily met. Reliability Products are the latest RoHS version compliant. APPLICATIONS * * * * * * Embedded design POS, Headsets, Tablets Gateway, Access Point Telematics Tracking Healthcare 10/1/2019 * * * * M2M, Industrial devices Smart Grid OBD-II Not recommended in harsh environments 1.575 GHz 1575.42 2.0 MHz Bandwidth 10 MHz min Gain at Zenith 1.0 dBic (typ) Polarization R.H.C.P Impedance 50 ohm Output VSWR 2.0 (typ) Operation Voltage LNA/Filter Gain 3.0 0.1 V 21 3 dB (DC = 3.0 V) Mechanical Specifications & Ordering Part Number Ordering Part Number 1004138 Size (mm) 13.0 x 13.0 x 6.8 Mounting Drop-in Weight (grams) 4.9 Packaging Plastic Tray Connector IPEX MHF Cable (mm) Proprietary O 1.13 coax , 126.0 cable www.ethertronics.com DATASHEET | Part No. 1004138 GPS Ceramic Patch Antenna with LNA Ethertronics' Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Filter/LNA Specifications 21 3 dB (DC = 3.0 V) Noise Figure 1.5 dB typ (DC = 3.0 V) 4.0 0.4 2.0 max (DC = 3.0 V) Current (DC =3.0 0.1V) 2.1 0.1 Output VSWR 2.6 Gain 3.0 Connector Dimensions (mm) 4.5 1.5 mA Center Pin: 3.0 V Connector: GND Mechanical Dimensions Typical antenna dimensions (mm) Part Number A (mm) B (mm) C (mm) D (mm) 1004138 13.0 0.2 13.0 0.2 6.8 0.7 126.0 3.0 (Antenna) Top View C D (PCB) D (Shield can) Side View A (PCB) (c) 2019 Ethertronics A B Bottom View tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: eth.info@avx.com 5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA