WJZ3030 Broadband Surface Mount Mixer Product Features Product Description Functional Diagram LO * * * * * * * +20 dBm Input IP3 RF: 10 - 500 MHz LO: 10 - 500 MHz IF: 10 - 500 MHz +7 dBm LO Drive Level No Internal Solder Connections Lead Free/RoHS-compliant SMT package * No External Bias Required The WJZ3030 is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package. The mixer is nominally driven with a LO input power of +7 dBm to optimize its performance. Other WJZ models are available for other LO drive levels. Targeted applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in VHF TV, GSM/ISM. The device can also be used in Radar, Satellite, Test / Medical Instruments, Avionics communications and Navigation markets. 2 1 6 3 5 4 IF RF Top View Applications * * * * Up/down frequency conversion Phase Detector Image Rejection Current Controlled Attenuator Specifications Parameter Units SSB Conversion Loss RF/LO = 10-500 MHz, IF = 30 MHz Port-to-Port Isolation L-R = 10-500 MHz L-I = 10-500 MHz R-I = 10-500 MHz 3rd Order Input Intercept Point 1dB Input Compression Point VSWR RF Port = 10-1000 MHz LO Port = 40-1000 MHz IF Port LO Drive Level Min dB dB dB dB dBm dBm dBm 45 32 Typ Max 6.8 8.3 60 43 36 +20.0 TBD 1.3:1 2.7:1 1.1:1 +7 Notes See note 1 1MHz tone spacing, See note 1 IF = 100 MHz 1. Measured in a 50 ohm system with a nominal LO drive of +7 dBm, low side LO, in a downconversion application. With LO = 900MHz, RF=1000MHz, IF=100MHz. Absolute Maximum Rating Parameter Operating Case Temperature Storage Temperature RF Input Power Rating -40 to +85 C -65 to +100 C +10 dBm Ordering Information Part No. Description WJZ3030 Broadband Surface Mount Mixer Standard T/R reel size = 500 pieces on a TBD reel. Operation of this device above any of these parameters may cause permanent damage. Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com May 2009 WJZ3030 Broadband Surface Mount Mixer Performance Charts Input IP3 vs Frequency Conversion Loss vs Frequency IF = 30 MHz, LO = 7 dBm , +25 0C IF = 30 MHz, LO = 7 dBm, +25 C Conversion Loss (dB) 0 Input IP3 (dBm) 25 20 15 10 5 0 0 100 200 300 400 10 9 8 7 6 5 500 0 100 RF Frequency (MHz) 200 300 400 500 RF Frequency (MHz) RF VSWR vs Frequency LO VSWR vs Frequency 0 3.8 3.6 3.4 3.2 3 2.8 2.6 2.4 2.2 2 2 1.8 VSWR VSWR IF = 30 MHz, LO = 7 dBm +25 C 1.6 1.4 1.2 1 0 100 200 300 400 0 500 100 200 300 400 500 Frequency (MHz) Frequency (MHz) Isolation vs LO Frequency 0 Isolation (dB) IF = 30 MHz, LO = 7 dBm, +25 C 90 75 60 45 30 15 0 0 100 200 300 400 500 LO Frequency (MHz) L-R L-I R-I Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com May 2009 WJZ3030 Broadband Surface Mount Mixer Mechanical Information This package is lead-free/RoHS-compliant. The plating material is ENIG " Electroless Nickel Immersion Gold" It is compatible with leaded and lead-free (maximum 260C reflow temperatures) Also recommend adding active flux of 2% during solder reflow. Top View Bottom View Side View Inches(mm) 1 2 3 6 5 4 Outline Drawing Land Pattern / Mounting Configuration Notes: 1. Package unit weight is TBD grams max. 2. Dimensions are expressed in inches. Dimensions in brackets are millimeter equivalents. 3. Tolerance .XXX +/- .015, .XX +/- .02 4. Package circuit board material: ceramic, .025" total thickness. 5. Blocking capacitors are required on the ports (pins 1, 4, 5) if any dc signal is present. Product Marking The component will be marked with a "WJZ3030" designator followed by an alphanumeric lot code on the top surface of the package. Tape and reel specifications for this part will be located on the website in the "Application Notes" section. Functional Pin Layout Pin No. 1 4 5 2,3,6 Function LO RF IF GND Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com May 2009