Bahco Group - Product Card Side cutting pliers, 2101G Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip. ISO: 5749 DIN: 5749 Finish: Black oxidised, anti-corrosion treated. Material: Chrome-Vanadium. With Ergo handles in two-material combination. Thermoplastic surface on tough polypropylene which gives a superior grip. Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces. Equipped with a return spring featuring an on/off function. Cutting capacity: Piano wire. IP = Industrial Pack A B C mm mm mm mmmmmmmm D E F G 2101G-125 0106462 5 125 14 17.5 8 1.0 1.2 14 1.6 105 2101G-140 0106479 5 140 16 19.5 9 1.5 1.3 16 1.8 126 2101G-160 0106486 5 160 18 21.5 10 2.0 1.5 18 2.0 162 2101G-180 0106493 5 180 20 23.5 11 2.5 1.5 20 2.25 245 2101G-200 0106509 5 200 22 25.5 11 2.5 1.5 22 2.5 304 2101G-125IP 0106516 5 125 14 17.5 8 1.0 1.2 14 1.6 105 2101G-140IP 0106288 5 140 16 19.5 9 1.5 1.3 16 1.8 126 2101G-160IP 0106295 5 160 18 21.5 10 2.0 1.5 18 2.0 162 2101G-180IP 0106523 5 180 20 23.5 11 2.5 1.5 20 2.25 245 2101G-200IP 0106530 5 200 22 25.5 11 2.5 1.5 22 2.5 304 http://extranet.bahco.com/catalogue/ProdCard.asp?showOnlyOne=true&this_might_p... 25/09/2003