© Semiconductor Components Industries, LLC, 2016
November, 2019− Rev. 3
1Publication Order Number:
NTMFS4C022N/D
MOSFET – Power, Single,
N-Channel, SO-8FL
30 V, 1.7 mW, 136 A
NTMFS4C022N
Features
•Small Footprint (5x6 mm) for Compact Design
•Low RDS(on) to Minimize Conduction Losses
•Low QG and Capacitance to Minimize Driver Losses
•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter Symbol Value Unit
Drain−to−Source Voltage VDSS 30 V
Gate−to−Source Voltage VGS "20 V
Continuous Drain Cur-
rent RqJC (Notes 1, 3) Steady
State
TC = 25°C ID136 A
Power Dissipation RqJC
(Notes 1, 3)
TC = 25°C PD64 W
Continuous Drain Cur-
rent RqJA (Notes 1, 2, 3) Steady
State
TA = 25°C ID30 A
Power Dissipation RqJA
(Notes 1, 2, 3)
TA = 25°C PD3.1 W
Pulsed Drain Current TA = 25°C, tp = 10 msIDM 352 A
Operating Junction and Storage Temperature TJ, Tstg −55 to
150
°C
Source Current (Body Diode) IS53 A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 11 A)
EAS 549 mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL260 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL RESISTANCE MAXIMUM RATINGS (Note 1)
Parameter Symbol Value Unit
Junction−to−Case − Steady State (Note 2) RqJC 1.95 °C/W
Junction−to−Ambient − Steady State (Note 2) RqJA 40
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
SO−8 FLAT LEAD
CASE 488AA
STYLE 1
MARKING
DIAGRAM
www.onsemi.com
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
4C022
AYWZZ
1
V(BR)DSS RDS(ON) MAX ID MAX
30 V 1.7 mW @ 10 V
136 A
2.4 mW @ 4.5 V
G (4)
S (1,2,3)
N−CHANNEL MOSFET
D (5,6)
Device Package Shipping†
ORDERING INFORMATION
NTMFS4C022NT1G SO−8FL
(Pb−Free)
1500 /
Tape & Reel
NTMFS4C022NT3G SO−8FL
(Pb−Free)
5000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
S
S
S
G
D
D
D
D
NTMFS4C022N
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA30 V
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
18.2 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 24 V
TJ = 25 °C 1
mA
TJ = 125°C 10
Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = 20 V 100 nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250 mA1.3 2.2 V
Negative Threshold Temperature Coefficient VGS(TH)/TJ4.8 mV/°C
Drain−to−Source On Resistance RDS(on) VGS = 10 V ID = 30 A 1.4 1.7
mW
VGS = 4.5 V ID = 30 A 2.0 2.4
Forward Transconductance gFS VDS = 3 V, ID = 30 A 136 S
Gate Resistance RGTA = 25 °C 1.0 W
CHARGES AND CAPACITANCES
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 15 V
3071
pF
Output Capacitance COSS 1673
Reverse Transfer Capacitance CRSS 67
Total Gate Charge QG(TOT)
VGS = 4.5 V, VDS = 15 V; ID = 30 A
20.8
nC
Threshold Gate Charge QG(TH) 4.9
Gate−to−Source Charge QGS 8.5
Gate−to−Drain Charge QGD 4.7
Total Gate Charge QG(TOT) VGS = 10 V, VDS = 15 V,
ID = 30 A
45.2 nC
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time td(ON)
VGS = 4.5 V, VDS = 15 V, ID = 15 A,
RG = 3.0 W
14
ns
Rise Time tr32
Turn−Off Delay Time td(OFF) 27
Fall Time tf17
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 10 A
TJ = 25°C 0.75 1.1
V
TJ = 125°C 0.6
Reverse Recovery Time tRR
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 30 A
47
ns
Charge Time ta23
Discharge Time tb24
Reverse Recovery Charge QRR 39 nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
NTMFS4C022N
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics
VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Resistance vs. VGS Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS, GATE−TO−SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
VGS = 10 V
3.4 V
3.2 V
3.0 V
2.8 V
TJ = 25°C
TJ = 25°C
TJ = 150°C
TJ = −55°C
ID = 30 A
VGS = 4.5 V
TJ = 25°C
VGS = 10 V
3.8 V
3.6 V
2.6 V
TJ = 25°C
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
345678910
0
25
50
75
100
125
150
175
200
225
250
0.0 0.5 1.0 1.5 2.0 2.5 3.0
4.5 V
0
25
50
75
100
125
150
175
200
225
250
1.5 2 2.5 3 3.5 4 4.5
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
0 25 50 75 100 125 150 175 200 225 250
VDS = 3 V
Figure 5. On−Resistance Variation with
Temperature
TJ, JUNCTION TEMPERATURE (°C)
15012510075250
RDS(on), DRAIN−TO−SOURCE
RESISTANCE (NORMALIZED)
50
ID = 30 A
VGS = 10 V
1.8
1.6
1.4
1.2
1.0
0.8
0.6
−25−50
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
30252015105
10
100
1000
10000
IDSS, LEAKAGE (nA)
VGS = 0 V
TJ = 85°C
TJ = 125°C
TJ = 100°C
0
NTMFS4C022N
www.onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 7. Capacitance Variation Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
Qg, TOTAL GATE CHARGE (nC)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
RG, GATE RESISTANCE (W)VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1001010.1
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
t, TIME (ns)
IS, SOURCE CURRENT (A)
ID, DRAIN CURRENT (A)
VGS = 0 V
TJ = 25°C
f = 1 MHz
Ciss
Coss
Crss
VDD = 15 V
ID = 15 A
VGS = 4.5 V
td(on)
tr
tf
TJ = 25°C
TJ = 150°C
VGS = 0 V
RDS(on) Limit
Thermal Limit
Package Limit
100 ms
10 ms
1 ms
TJ = 25°C
VDS = 15 V
ID = 30 A
10 ms
1000
td(off)
10
100
1000
10000
0.1 1 10 100
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0
3
6
9
12
15
18
0
1
2
3
4
5
6
7
8
9
10
11
12
0 5 10 15 20 25 30 35 40 45 50
QT
Qgs Qgd
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
10
100
1000
0.1 1 10 100
0.1
1.0
10.0
100.0
1000.0
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
TJ = −55°C
VDS
VGS
VGS ≤ 10 V
TC = 25°C
100
10
1
NTMFS4C022N
www.onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 12. Thermal Impedance (Junction−to−Ambient)
PULSE TIME (sec)
R(t) (°C/W)
10%
Duty Cycle = 50%
20%
5%
2%
1%
Single Pulse
0.001
0.01
0.1
1
10
100
1E−06 1E−05 1E−04 1E−03 1E−02 1E−01 1E+00 1E+01 1E+02 1E+03
RqJA Steady State = 40°C/W
PCB Cu Area = 650 mm2
PCB Cu Thk = 2 oz
Figure 13. Avalanche Characteristics
TIME IN AVALANCHE (s)
1.00E−021.00E−03
1
10
IPEAK, (A)
1.00E−04
100
TJ(initial) = 25°C
TJ(initial) = 100°C
NTMFS4C022N
www.onsemi.com
6
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE N
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
4.530
1.530
4.560
0.495
3.200
1.330
0.965
2X
2X
4X
4X
PITCH
DIMENSIONS: MILLIMETERS
1
RECOMMENDED
2X
0.475
M3.00 3.40
q0 −−−
_
3.80
12
_
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.575
K1.20 1.35
L0.51 0.575
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 c L
DETAIL A
A1
c
4 X
C
SEATING
PLANE
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
M
PIN 5
(EXPOSED PAD)
5.00 5.30
6.00 6.30
e
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
