- 442 - REV.1 Oct.-2003
2W005M THRU 2W10M
Single Phase 2.0 AMPS. Silicon Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
2.0 Amperes
F
eatures
UL Recognized File # E-96005
Surge overload ratings to 50 amperes
peak
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260/ 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
M
echanical Data
Case: Molded plastic
Lead: Solder plated
Polarity: As marked
Weight: 1.10 grams
WOB
Dimensions in inches and (millimeters)
M
aximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol 2W
005M 2W
01M 2W
02M 2W
04M 2W
06M 2W
08M 2W
10M Unit
s
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA=50I(AV) 2.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method ) IFSM 50 A
Maximum Instantaneous Forward Voltage
@2.0A VF1.1 V
Maximum DC Reverse Current @ TA=25
at Rated DC Blocking Voltage @ TA=100IR10
500 uA
uA
Typical Thermal resistance (Note) RθJA
RθJL 40
15 /W
Operating Temperature Range TJ-55to+125
Storage Temperature Range TSTG -55to+150
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead at
0.375” (9.5mm) Lead Length for P.C.B. Mounting.
- 443 -
RATINGS AND CHARACTERISTIC CURVES (2W005M THRU 2W10M)
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
0.01
0.1
1.0
10
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
TJ=100 C
0
TJ=25 C
0
FIG.1- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER BRIDGE ELEMENT
PEAK FORWARD SURGE CURRENT. (A)
110 100
0
10
40
30
20
50
NUMBER OF CYCLES AT 60Hz
8.3ms Single Half Sine Wave
JEDEC Method
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD CURRENT. (A)
0.2 .4 .6 .8 1.0 1.2 1.4
.01
0.1
1.0
10
INSTANTANEOUS FORWARD VOLTAGE. (V)
Tj=25 C
PULSE WIDTH-300 S
2% DUTY CYCLE
0
FIG.2- MAXIMUM CURRENT DERATING CURVE
OUTPUT RECTIFIED CURRENT
AVERAGE FORWARD CURRENT. (A)
20 40 60 80 100 120 140
0
.5
1.5
1.0
2.0
AMBIENT TEMPERATURE. ( C)
o
RESISTIVE
INDUCTIVE LOAD
