Terminals New in this catalogue W-Series Installation terminal blocks WPE 35 N Page 2/14 different colour versions ZQV Cross-connections Page 2/5 Installation terminal blocks WDU 35 N Pluggable cross-connections for WDU 2.5 Page 2/9 Page 2/4 Cross-connections Disconnect test terminal blocks Installation terminal blocks WTR 2.5/ZZ WNT 35 N Page 2/23 Page 2/4 Page 2/17 Z- Series Miniblocks in tension clamp technology ZPEB 2.5-2/2AN ZDUB 2.5-2 ZDUB 2.5-2 TS15 Page 2/59 TS15/TS35 Page 2/57 Direct mounting Page 2/57 ZDUA 2.5-2 ZDUB 2.5-2 ZDUB 2.5-2 Rastclip Page 2/57 ZPEA 2.5-2 TS15 Page 2/57 KLBU Series for different installation versions Shield connection terminals 4 TS15 Page 2/59 Page 3/18 TS15 Page 2/59 Terminals W Series - Innovative terminals made of inflammable polyamide Feed-through terminal blocks in Wemid for TS 35 W W W WDU 2.5N WDU2.5 N/10/BEZ WDU 1.5/ZZ Page 2/6 Page 2/6 WDU 2.5 WDU 2.5/10 Page 2/5 Page 2/5 W WDU 2.5/1.5/ZR Page 2/6 W WDU 4 WDU 4/10/BEZ Page 2/7 WMA 4/5 WMA 4/4 Page 2/8 W W W W WDK 2.5 WDK 2.5/10/BEZ WDK 2.5 800 V WDK 2.5 V Page 2/6 Page 2/7 Page 2/7 Page 2/7 W W WDK 2.5 DU-PE WDK 2.5 E WDK 2.5 E GET.SCH. Page 2/7 Page 2/7 W W W W WDU 6 WDU 6/10/BEZ Page 2/8 WDU 10 WDU 16N WDU 16 Page 2/8 Page 2/8 Page 2/9 W WDU 16/ZA with lug Page 2/9 W WDU 2.5 WDU 2.5/10/BEZ WDU 35N WDU 35 Page 2/9 Page 2/9 W W WDU 35/ZA with lug Page 2/9 WDU 70N Page 2/9 X WDU 70/95 WDU 70/95/... Block of three Page 2/11 Page 2/10 WDU 120/150 Page 2/11 WDU 120/150/... Block of three Page 2/11 Tab connection terminals in Wemid for TS 35 W WFF 35 M 6 Page 2/12 2/II W W WFF 70 M8 Page 2/12 WFF 120 M10 Page 2/13 W WFF 185 M 12 / WFF 185 M 16 M 12 / M 16 Page 2/13 W WFF 300 M 16 Page 2/13 Protective conductor terminal blocks in Wemid for TS 35 W W W W W WPE 2.5N WPE 1.5/ZZ Page 2/14 W WPE 2.5 WPE 2.5/1.5/ZR WDK 2.5 PE WDK 2.5 DU-PE WPE 4 WPE 6 Page 2/14 Page 2/14 Page 2/14 Page 2/15 Page 2/15 Page 2/15 Page 2/15 W W W W WPE 10 WPE 16N WPE 16 WPE 35N WPE 35 WPE 70N WPE 70/95 WPE 120 Page 2/14 Page 2/14 Page 2/14 Page 2/14 Page 2/15 Page 2/15 Page 2/15 Page 2/15 W W W W Isolating neutral terminal blocks in Wemid for TS 35 W W W W W W WNT 2.5 WNT 4 WNT 6 WNT 10 WNT 16N WNT 35 N WNT 70N Page 2/16 Page 2/16 Page 2/16 Page 2/16 Page 2/17 Page 2/17 Page 2/17 Three-way terminal blocks in Wemid for TS 35 with 10 x 3 N-Ssch W W WDL 2.5 S/NT/L/PE Page 2/18 WDL 2.5 S/L/L Page 2/18 W WDL 2.5 S-Blocks Page 2/19 W WDL 2.5 S/N Page 2/19 WDL 2.5 S/L Page 2/19 W WDL 2.5 S/N/L Page 2/19 W W WDL 2.5 S/N/L/PE Page 2/19 WDL 2.5 S/L/L/PE Page 2/19 Three-way terminal blocks in Wemid for TS 35 with WQV 4 N-cross-connection system W W W WDL 2.5/NT/L/PE WDL 2.5/L/L WDL 2.5/N WDL 2.5/L WDL 2.5/N/L WDL 2.5/N/L/PE WDL 2.5/L/L/PE Page 2/20 Page 2/20 Page 2/21 Page 2/21 Page 2/21 Page 2/21 Page 2/21 W W W W 2/III Disconnect test terminal blocks in Wemid W W WTR 2.5 Take-out disconnect WTR 2.5 D with diode plug Page 2/22 Page 2/22 W W W WTR 2.5 without breaker WTR 2.5/ZZ WDTR 2.5 WDTR 2.5/WE Page 2/22 Page 2/23 Page 2/23 Page 2/23 W WTR 2.5 D with diode plug and socket type StB 2.3 Page 2/22 W W WDL 2.5TR-DU-PE WDL 2.5TR-DU SAKC 4/35 Page 2/23 Page 2/23 Page 2/23 W W W W WDT 1.5/1 current measuring Page 2/24 WDT 1.5/2 insulation measuring Page 2/24 WDT 1.5/3 insulation measuring Page 2/24 Disconnect test terminal in wemid for TS 35 and TS 32 W WTL 6/1/STB Longitud. disconnect Page 2/30 W W WTD 6/1 Feed-through Page 2/30 W WTQ 6/1 Cross disconnect Page 2/31 WTL 6/2 Longit. disconnect Page 2/31 W WTL 6/3/STB Safety socket Page 2/31 Fuse terminals in Wemid for TS 35 W W WSI 6 for metric fuses Page 2/32 WSI 6 LD with LEDs for VAC/VDC Page 2/32 W WSI 6/2 LD with 2 LEDs for VDC Page 2/32 Fuse terminals in Wemid for TS 35 W SAKS 4/35 fur D 01-fuses E 14 Page 2/33 2/IV W SAKS 2/35 fur D-fuses E 16 Page 2/33 W WSI 6/2 for inch fuses Page 2/32 W WSI 6/2 / LED for inch fuses VAC/VDC Page 2/33 Thermocouple terminals W SAKS 5/35 fur D 02-fuses E 18 Page 2/33 W WDU 2.5/TC Types K,T,J,S+R,B,E Page 2/34 W WSI 6/2 / 2 LED's for inch fuses VDC Page 2/33 Terminals with plug-in connection WSA Terminal housing to take electronic components W W WDU 4 SA 400 V Page 2/35 WPO Page 2/35 Feed-through terminal blocks in Wemid for BLA/BLZ plug-in connectors W W W W W W W W WDU 1.5/BLA WDU 1.5/LD/BLA with LED red Page 2/36 WDU 1.5 R/BLA blue Page 2/36 WDK 2.5 BLA R 5.08 250 V Page 2/36 WDU 1.5 BLZ 5.08 WDU 1.5/BLZ/ LD/5.08 with LED red Page 2/37 WDU 1.5/BLZ/ R 5.08 blue Page 2/37 WDK 2.5/BLZ R 5.08 250 V Page 2/37 Page 2/36 Page 2/37 W WDU 2.5/BLZ R 7.62 400 V Page 2/37 W WDK 2.5/BLZ R 7.62 400 V Page 2/37 Feed-through terminals with solder, tab, Termipoint(R) and Wire-wrap(R) connection in Wemid for TS 35 W W WDU 2.5 F W WDU 2.5 FF W WDK 2.5 F W WDK 2.5 FV W WDK 2.5 FF WDK 2.5 FFV Page 2/38 Page 2/38 Page 2/38 Page 2/38 Page 2/39 Page 2/39 Feed-through terminals with tab-connection W W W AST 1 AST 4 AST 5 Page 2/40 Page 2/40 Page 2/40 W W WDK 2.5 T WDK 2.5 TT Page 2/39 WDU 2.5 T Page 2/39 W WDU 2.5 L WDU 2.5 LL Page 2/39 W WTR 2.5 L WTR 2.5 LL Page 2/39 Terminal blocks coloured W W W W W SAK 4 S/35 SAK 4 SS/35 Page 2/40 WDU 2.5 WDU 4 WTR 2.5 WSI 6 Page 2/41 Page 2/41 Page 2/41 Page 2/41 2/V Terminals Z Series - Innovative terminals with tension clamp connection Feed-though terminals in Wemid for TS 35 W W ZDU 2.5-2/3AN W ZDU 2.5-2/4AN Page 2/44 Page 2/44 W ZDU 2.5 ZDU 2.5/10 Page 2/44 W W ZDU 2.5/3AN ZDU 2.5/3AN/10 ZDU 2.5/4AN ZDU 2.5/4AN/10 ZDU 2.5/2 x 2 AN/10 Page 2/44 Page 2/45 Page 2/45 W ZDU 2.5/2 x 2 AN W W W W W ZDU 2.5 2 x 2 AN/D Page 2/45 ZDU 2.5 2x2 AN/LD Page 2/45 ZDU 4 ZDU 4/10 Page 2/45 ZDU 6 ZDU 6/10 Page 2/45 W W W W W ZDK 2.5/1.5 ZDK 2.5/1.5 V ZDK 2.5/1.5 N-DU ZDK 2.5/1.5 DU-PE ZDK 2.5/1.5 N-PE ZDK 2.5/1.5/D/1...6 Page 2/46 Page 2/46 Page 2/46 Page 2/46 Page 2/47 ZDK 2.5/1.5/LD/1 ZDK 2.5/1.5/LD/2 Page 2/47 Page 2/47 Protective earth terminals in Wemid for TS 35 W W Page 2/48 W W ZPE 2.5 ZPE 2.5/3AN ZPE 2.5/4AN ZDK 2.5/1.5 PE Page 2/48 Page 2/48 Page 2/49 Page 2/49 ZDK 2.5/1.5 DU-PE Page 2/49 W W ZPE 2.5-2/3AN ZPE 2.5-2/4AN Page 2/48 W Disconnect test terminals in Wemid for TS 35 W W W ZTR 2.5/D ZTR 2.5/3 AN/D Page 2/50 Page 2/50 Page 2/50 Page 2/50 W W ZRV 1.5PE mit STGH ZRV 1.5/PE Page 2/53 Page 2/53 Protective earth terminal with connector socket W ZKBD 2.5/1.5 PE with ZSLD or SLZF Page 2/55 2/VI W ZTR 2.5/3 AN ZRV 1.5 mit STGH ZRV 1.5 W W ZPE 4 ZPE 6 Page 2/49 Page 2/49 Fuse terminals in Wemid for TS 35 ZTR 2.5 Terminals with plug-in connector W ZDK 2.5/1.5 N-PE Page 2/49 W W ZSI 2.5 for metric fuses Page 2/51 ZSI 2.5/2 for inch fuses Page 2/51 Feed-through terminal with connector socket W ZKBD 2.5/1.5 with ZSLD or SLZF Page 2/54 W ZKSD 2.5/1.5 with ZBLD or BLZF Page 2/54 Feed-through terminal with connector socket W W W ZKSD 2.5/1.5 PE with ZBLD or BLZF Page 2/55 ZDKS with BLZF Page 2/56 ZDKB with SLZF Page 2/56 Miniblock terminals ZDUB 2.5-2/2AN Direct mounting Page 2/58 ZDUB 2.5-2/4AN Direct mounting Page 2/58 ZDUB 2.5-2/2AN Snap-in clips Page 2/58 ZDUB 2.5-2/4AN Snap-in clips Page 2/58 U U U ZDUB 2.5-2/2AN TS 15 Page 2/59 ZDUB 2.5-2/4AN TS 15 Page 2/59 ZPEB 2.5-2/2AN TS 15 Page 2/59 New miniature terminals in tension clamp technology with modular terminal block features U U ZDUA 2.5-2 TS 15 / available Sep. 97 Page 2/59 ZPEA 2.5-2 TS 15 / available Sep. 97 Page 2/59 Accessories for the Z Series ZZA 2.5 Additional connection Page 2/60 ZBW Spring displacer Page 2/60 ZST Mounting block Page 2/60 ZQB 2.5 Cross-connection bridge Page 2/60 SFEH Wrap pins Page 2/61 ZDUS Shielded cable terminal Page 2/61 ZQV 2.5/50 Cross-connection Page 2/61 Modular terminals: ZIK-ZAK - with integrated cross-connection for connecting initiators and actuators ZIA 1,5/3 L ZIA 1,5/4 L Terminal base 3-way / 4-way Page 2/64 ZIA 1,5/3 L-BE ZIA 1,5/4 L-BE Terminal base 3-way / 4-way Page 2/65 ZVL 1.5 Distribution strip ZPV 1.5 Page 2/67 Page 2/67 2/VII SAI distributor family SAI- (4...6...8) K / SAI- (4...6...8) S Pluggable screw connection for bus line Page 2/68 Miniature circular connectors SAIS-5/7 Page 2/69 Miniature circular connectors SAISW-5/7 Page 2/69 DL-, VL series Innovative terminals with several connection levels Feed-through terminals for initiators and actuators W W DLI 2.5 DLI 2.5/LD with LED (NPN) Page 2/70 Page 2/70 W W DLI 2.5/LD with LED (PNP) Page 2/70 W DLD 2.5 DLA 2.5 Page 2/70 Page 2/71 W DLA 2.5/D with Diode Page 2/71 W DLA 2.5/LD with LED Page 2/71 W DLA 2.5/LD/D with LED+Diode Page 2/71 DLD 2.5/PE Page 2/71 Feed-through terminals for motors Feed-through terminals for initiators and actuators W W W W KDKS 1/PE VLI 1.5 VLI 1.5/PE MAK 2.5 Page 2/71 Page 2/72 Page 2/72 Page 2/72 W SAK series Standard feed-through terminals for TS 32 Feed-through terminals in PA 66 for TS 32 Y Y Y Y Y Y Y SAKD 2.5 N 5 mm width Page 2/74 SAK 2.5 6 mm width Page 2/74 SAKD 4 DK 4 Q DK 4 QV SAK 6 N SAK 10 Page 2/74 Page 2/74 Page 2/75 Page 2/75 Page 2/75 Y 2/VIII Y Y SAK 16 SAK 35 N SAK 35 SAK 70 SAK 95 Page 2/75 Page 2/76 Page 2/76 Page 2/76 Page 2/76 Y Y Feed-through terminals for thermocouples Y W SAK 2.5 TC DK 4 TC Page 2/78 Page 2/78 Stud terminals in KrG for TS 32 Y SAKG 28 I M6 Page 2/79 Y SAKG 40 I M 10 Page 2/81 Y SAKG 28 II M6 Page 2/79 Y SAKG 40 II M 10 Page 2/81 Y Y SAKG 28 II G M6 Page 2/80 Y SAKG 28 III M6 Page 2/80 Y Y SAKG 40 II G M 10 Page 2/81 Y SAKG 32 I M8 Page 2/80 Y SAKG 40 III M 10 Page 2/82 Y SAKG 32 II M8 Page 2/80 SAKG 32 II G M8 Page 2/81 Y SAKG 46 II M 12 Page 2/82 Y SAKG 46 II G M 12 Page 2/82 SAKG 54 II M 16 Page 2/82 Y SAKG 32 III M8 Page 2/81 Y SAKG 54 II G M 16 Page 2/83 Y SAKG 70 II G M8 Page 2/81 Y SAKG 46/I AL M 12 / M14 Page 2/83 Stud terminals in KrG for TS 32 Y SS 6 M6 Page 2/84 SS 8 / SS 10 M 8 / M 10 Page 2/84 Y Y Y SS 12 M 12 Page 2/84 KST 5 M5 Page 2/85 KST 6 M6 Page 2/85 KST 8 M8 Page 2/85 KST 10 M 10 Page 2/85 KST 12 M 12 Page 2/85 ST 5 / STSL 5 with / without solder connection Page 2/85 PE terminals in PA 66 for TS 32 Y Y Y Y Y EK 2.5 N EK 4 EK 10 EK 16 EK 35 Page 2/86 Page 2/86 Page 2/86 Page 2/86 Page 2/87 EK 2 10 mm2 Page 2/87 Y Y Y SAKE 35 SAKE 70 Page 2/87 Page 2/87 2/IX Fuse terminals for TS 32 W ASK 1 5 x 20 Page 2/88 Y Y Y KDKS 1 SAKS 1 / SAKS 1/35 5 x 20 Page 2/88 5 x 20 + Durchg.-Ebene Page 2/88 Y SAKS 1/G 25 Neon lamp 5 x 25 Page 2/88 Y Y SAKS 4 * SAKS 4/35 Neozed D 01 Page 2/90 SAKS 3 1 1/4x1/4", 5X30 Page 2/90 KSKM 1 5 x 20 SBL Page 2/89 KSKM 2 1 x 1/4" SBL Page 2/89 Y SAKS 5 * SAKS 5/35 Neozed D 02 Page 2/90 KSKM 3 1 1/4 x 1 1/4" SBL Page 2/89 Y SAKS 2 Diazed E 16 Page 2/91 SAKS 4 USA, Frankr. 10,3x38,1 Page 2/91 Fuse terminals with indicator ASK 1 LD KDKS 1 SAKS 1 SAKS 4 Page 2/91 Page 2/91 Page 2/92 Page 2/92 Y Fuse cartridges and gauge rings for Weidmuller fuse terminals SAKS 6 SAKS 7 Page 2/92 Page 2/92 Pressure connectors for TS 32 Y Y Fuse cartridges gauge rings SV 2 SV 3 Page 2/93 Page 2/93 Page 2/94 Page 2/94 Disconnect terminals for TS 32 Y SAKR 4 mm2 Page 2/95 Y 2/X Y SAKR-D with diode plug DLS 2 Page 2/95 Y SAKA 10 SAKB 10 Page 2/96 Page 2/96 Y Y Y Y Y SAKC 4 / SAKC 4/35 4 mm2 Page 2/96 SAKC 10 / SAKC 10/35 10 mm2 Page 2/96 DKT 4 DKT 4 V ASK 1 Page 2/95 Page 2/95 Page 2/95 Y Y Y Y SAKT 1/LT Lateral disconnection Page 2/97 SAKT 1/DU 1 Feed-through Page 2/97 SAKT 1/QT 1 Cross-disconnection Page 2/97 SAKT 2/LT Lateral disconnection Page 2/97 Y SAKT 4/LT Page 2/98 Y SAKT 4/DU Feed-through Page 2/98 Feed-through and disconnect terminals with solder-, tab-, Termipoint(R)- and Wire-wrap(R)-connection Y Y Y Y AST 1 AST 3 AST 4 AST 5 Page 2/99 Page 2/99 Page 2/99 Page 2/99 Y DK 4 S only 2,8 mm Page 2/101 Page 2/101 Y Y SAK 4 S SAK 4 SS SAKR F Page 2/100 Page 2/100 Page 2/100 Y Y DK 4 S Y Y Y SAK 2.5 T 1 x 1 Pin Page 2/102 SAK 2.5 T 0,8 x 1,6 Pin Page 2/102 SAK 2.5 T 0,8 x 2,4 Pin Page 2/102 Y Y Y Y Y Y Y DK 4 T / DK 4 QT 1 x 1 Pin Page 2/103 DK 4 T / DK 4 QT 0,8 x 1,6 Pin Page 2/103 DK 4 T / DK 4 QT 0,8 x 2,4 Pin Page 2/103 SAKR T 1x1, 0,8x1,6, 0,8x2,4 Page 2/103 SAK 2.5/M.LS with shield connection Page 2/105 SAK 2.5 L SAK 2.5 LL Page 2/105 Page 2/105 Y Y Y SAKR L with Disconnector Page 2/105 SAKR L with 1 x StB. o 2,3 mm Page 2/106 SAKR L with 2 x StB. o 2,3 mm Page 2/106 Y SAKR LL with Disconnector Page 2/106 Y SAKR LL with 2 x StB. o 2,3 mm Page 2/106 Y TAL Disconn., 2 solder conn. Page 2/107 Y TAL Disconn., 4 solder conn. Page 2/107 Rack mounted interface system AVR 4/10 0,8x1,6 + 0,8x2,4 Page 2/104 Ceramic feed-through terminals for use in high temperature ranges up to max. 210C SAKK 4 for TS 32 Page 2/107 SAKK 10 for TS 32 Page 2/107 Feed-through terminals for temperature measuring circuits / AKZ-series for TS 15 W AKZ 4/TC Page 2/114 2/XI AKZ series Feed-through terminals for space saving assembly Feed-through- , PE- ,Fuse- and Disconnect terminals for TS 15 W W W AKZ 1.5 AKZ 2.5 AKZ 4 Page 2/108 Page 2/108 Page 2/108 W W AKE 2.5 AKE 4 AKE 4 MS Page 2/109 Page 2/109 Page 2/109 AKZ 4 for test adapter Page 2/108 W AK 4 * AK 4/10 Page 2/109 W W ASK 1 5 x 20 Page 2/109 SAKR 2 x StB o 2,3 mm Page 2/109 Feed-through terminals with solder-, tab-, Termipoint(R)- and Wire-wrap(R)-connection W W W AKZ 4 SS 6,3 mm slotted Page 2/110 AKZ 4 SS 4 x 2,8 mm Page 2/110 AKZ 4 S Srew- 2 x 2,8 mm Page 2/110 W W W W W W AKZ 4 SF AL 1 AKZ 1.5 L AKZ 2,5 K AKZ 4 L Page 2/110 Page 2/111 Page 2/111 Page 2/111 Page 2/111 AKZ 4 LL Pin 0,8 x 1,6 Page 2/111 W AKZ 1,5 T Pin 1 x 1 Page 2/112 W W W AKZ 1,5 T Pin 0,8 x 1,6 Page 2/112 AKZ 2,5 K Pin 0,8 x 1,6 Page 2/112 W AKZ 2,5 K Pin 0,8 x 1,6 Page 2/113 W AKZ 2,5 K Pin 0,8 x 1,6 Page 2/113 AKZ 4 T 1x1 Page 2/113 W W W AKZ 4 T 0,8 x 1,6 Page 2/113 AKZ 4 T 0,8 x 2,4 Page 2/113 AKZ 4 ST 0,8 x 1,6 Page 2/113 MK-, BK series Multipole terminal blocks and Feed-through terminals for direct mounting Multipole terminal blocks for direct mounting MK 2/12 2,5 mm2 Page 2/115 2/XII MK 10/14 2,5 mm2 Page 2/115 MK 3/12 2,5 mm2 Page 2/115 MK 4/16 2,5 mm2 Page 2/115 SLS 2 4+2poles MKL 2/12 MF 2/12 Page 2/117 Page 2/118 Page 2/118 MK 5/2 2,5 mm2 Page 2/116 KS 2 ... 10 2,5 mm2 Page 2/116 MKL 3/12 2-12poles vertical Page 2/118 BK 2 ... 12 4 mm2 Page 2/116 MKL 3/12 2-12 poles horizontal Page 2/118 MK 6/2 ... 6/6 6 mm2 Page 2/116 MDM 10/1 Page 2/117 MKL 4/16 horizontal Page 2/118 MF 1/6 ... 1/12 also with single tab Page 2/117 MKL 4/16 vertical Page 2/118 MK-, BK series Multipole terminal blocks, Screw, solder, tab connection modular design Feed-through and fuse terminals for Screw connection AKB 4 AKZ 2.5 Page 2/119 Page 2/119 ASK 1 5 x 20 Page 2/119 ADK series Feed-through terminals for sheet metal-cut-out mounting Feed-through terminals with solder-, tab-, Termipoint(R)- and Wire-wrap(R)-connection AKA 2.5 ADK 1 ADK 1 F / 3 F ADK 1 S ADK 3 W ADK 1 T ADK 2.5 K Page 2/120 Page 2/120 Page 2/120 Page 2/120 Page 2/121 Page 2/121 Page 2/121 ADK 2.5 K with Solder tag Page 2/121 ADK 1 FT MK 2/12 Page 2/121 Page 2/121 Rack mounted interface systems DSG 1.5 T/32 2 x Direct, 1 x 0,8 x 1,6 Page 2/122 TOP 1.5 F/32 Top-Screw - 0,8 x 2,8 Page 2/122 SP 10 FF / SP 10 LF SP 60 FF / SP 60 LF SP 90 FF / SP 90 LF 3 x 0,8 x 6,3 - 3 x 0,8 x 6,3 3 x 0,8 x 6,3 - 3 x 0,8 x 6,3 3 x 0,8 x 6,3 - 3 x 0,8 x 6,3 Page 2/122 Page 2/122 Page 2/123 RV series Interface system for high density wiring Rack mounted interface systems RSV 8/8 long 64 x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 4/9 short Page 2/124 RV 8/8 long 64x0,8x2,4 -0,8x2,4 Page 2/124 RV 8/8 short 64 x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 8/20 short 160 x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 8/8 short 64x0,8x2,4-0,8x2,4 Page 2/124 RV 8/9 long 72x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 8/20 short 160 x 0,8 x 2,4 - 0,8 x 2,4 Page 2/124 RV 8/9 long 72x0,8x2,4-0,8x2,4 Page 2/124 RV 8/56 short 448 x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 8/9 short 72x 0,8 x 2,4 - 1 x 1 Page 2/124 RV 8/9 short 72x0,8x2,4-0,8x2,4 Page 2/124 RV 8/56 short 448 x 0,8 x 2,4 - 0,8 x 2,4 Page 2/124 2/XIII Advantages of Weidmuller terminal blocks 30 years of Weidmullers know-how were put into the Weidmuller W series. The result is a new system, that defines a new standard ... compact design same dimensions in a range from 2,5 - 16 mm2, features a.o. disconnect and fuse functions easy project planning Common features of all variants are: Wemid insulating material l Non-tracking - CTI 600 l Temperature resistant - 120 C l Self-extinguishing - VO according to UL l No harmful substances New design of terminal blocks supports ease of installation and wiring. l Recessed grips in the area of conductor entry funnels - ergonomic design feature! l Standard overall dimensions reduce accessories. l Restricted conductor guidance in the open clamping unit through conical entry funnel. Absolute shock protection with conductors connected; for feed-through terminals also with cross connections. Safe from finger-touch according to VDE 0106, part 100. Reliable conductor connection through proven design features. l High contact force - long-term stable contact point l Mechanical and electrical functions safely separated by special design; vibration resistant l Wide clamping range; also suitable for two conductors (W-series); rated crosssection also connectable with ferrule l Corrosion-resistant copper current bar with tin-lead plated surface; low voltage drop; no risk of stress corrosion cracking l Open clamping unit with polarizing protection l Quick and easy conductor connection l Staggered arrangement in terminal insulator; parallel routing of two potentials possible. l No end plates or partition plates for adjacent cross connections up to 380 V. l The full rated current of the terminal can be conducted over all pole numbers. Types of connection l Clamping yoke system l Tension spring connection l Push-on connection l Wire-wrap connection(R) l TERMI-POINT connection(R) l Solder connection Clear marking of incoming and outgoing conductors with dekafix and WS 10/ WS 12 Cross connection system lPrefitted units 2, 3, 4 and 10-pole. l l l l l All approvals q SEV Switzerland r CSA Canada Prefitted units 2, 3, 4 and 10-pole. a UL USA Shock protected without accessories. NEMKO Norway Captive fixing screws; screwdriver guide x y DEMKO Denmark provided by recessed arrangement z SEMKO Sweden (W-series). i KEMA Netherlands Snap-fitting in terminal insulator; easy SETI Finland approvals overhead installation. L.C.I.E. EX approvals Connecting links can be broken off; Naval approvals terminal skipping possible. Wire-Wrap(R) = registered trademark of the company Gardner Denver 2/2 TERMI-POINT(R) = registered trademark of the company AMP W This series has versions for conductors up to 150 mm2. The new cross-connection system offers particular advantages. * Only two different end plates. * The larger end plate can be used as a partition for the smaller terminals. * Both end plates latch tightly onto the terminals. Because of its clearly reduced external dimensions, the WDU 1.5 is particularly suitable for confined spaces. This small design does, however, make parallel cross-connection impossible and a separate end plate is needed. * Pre-assembled units with 2, 3, 4 and 10 poles. Assembly and removal latch on * Shock-hazard protection according to VBG 4 or. VDE 0106 Part 100/3.83 without additional components. * Captive fixing screws. Screwdriver guidance through countersunk arrangement. * Engageable in terminal moulding - simple overhead assembly. * No end plates or partitions for neighbouring cross-connection up to 400V. * The full terminal rated current can be fed across all numbers of poles. * Snap-off connection tags - skipping of terminals is possible. * Offset arrangement in terminal moulding - parallel use of 2 potentials possible latch off The terminals can be moved along the mounting rail with little effort. This is advantageous because it allows the position of a terminal strip to be easily matched to local conditions. End brackets fitted on the left and right prevent undesired displacement and securely position the terminals. End brackets can also accept marking tags and thus be used for group marking. Combination Simple Weidmuller double deck terminals permit high wiring density despite their narrow width. The number of terminal points can be doubled by exchanging for 5 mm-wide standard terminals, without lengthening the mounting rail. Weidmuller double deck terminals have the following wiring advantages: * Cross-connections possible in one or both levels. * Current bar connection between upper and lower level optional. * Individual terminals replaceable without moving neighbouring terminals * Clear identification of individual terminals * For potential multiplication in confined spaces we recommend, for example, Weidmuller double deck terminals with current bar connection between the upper and lower levels. These terminals can be recognised by the V-shaped groove in the terminal moulding. Parallel Feed-through terminals for L1, N disconnect and PE terminals Arrangement of 2 potentials This cross-connection system cannot only be employed with feed-through terminals, but also in combination with PE terminals and N-disconnect terminals. Extremely economical terminal strips can be assembled in this way. Although each individual terminal block is shock-hazard protected with and without cross-connection, covers with high voltage flash DIN 30600 can be snap-fitted for all terminals up to 150 mm2 rated cross-section; a group tag carrier can also be fitted as an alternative. * Marking of live terminals. * Absolute shock protection is guaranteed. * Practical identification of functional groups in addition to terminal marking. * Three systems available for terminal marking - up to 10 characters possible. An additional feature is the letter V in the type designation, such as - WDK 2.5 V Cat.No. 102230 2/3 2 Pluggable cross-connection system for bestseller WDU 2.5 Cat. No. 102000 40 % of all terminal blocks are cross-connected. Considerable assembly time saving Touch safe protection according to VBG 4 and VDE 0106, Part 100 /3.83 without additional parts 2/4 No end plates or partitions for neighbouring cross-connections up to 400 V Contact elements can be removed by hand, so that several terminals can be skipped Feed-through Terminals WDU 2.5 WDU 2.5/10 W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 1/8.92 / IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage/pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Contin. curr. rating of cross-connection WQV/ZQV 2poles A Contin. curr. rating of cross-connection WQV/ZQV multipole A UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version Wemid Blue Wemid Orange PA Terminal block printed 1-9 Wemid Terminal block unprinted* Wemid Triple use up to 125 V with ZQV 2.5N End plate/partition WAP WTW Cross-connection** ZQV WQV WQB B/24 Parallel use up to 400 V with ZQV1) 2.5 N or WQV 2.5 WAP (thickness 1.5 mm) Wemid Blue Wemid Wemid Blue Wemid 2-pole 3-pole 4-pole 5-pole 6-pole 7-pole 8-pole 9-pole 10-pole 32-pole endless 50pole Screen lug LS 2.8 Notching tool WAW 1 for WQV Test adapter WTA Test plug/socket PS 2.3 Yellow ZQV 2.5N/2 169380 ZQV 2.5N/3 169381 ZQV 2.5N/4 169382 ZQV 2.5N/5 169383 ZQV 2.5N/6 169384 ZQV 2.5N/7 169385 ZQV 2.5N/8 169386 ZQV 2.5N/9 169387 ZQV 2.5N/10 169388 ZQV 2.5N/50-endless 169389 Red 171790 171791 171792 171793 171794 171795 171796 171797 171798 171817 Blue 171799 171800 171801 171802 171803 171804 171805 171806 171807 171818 Colored Cross conection ZQV 2.5N 1) Black Qty. 171808 60 171809 60 171810 60 171811 20 171812 20 171813 20 171814 20 171815 20 171816 20 171819 5 Cover WAD with Symbol WAD white (for self-labeling) Group marking T5 WGB StB 8.5 32 A/4 mm2 32 A/4 mm2 5/60/47 10 mm/M 2,5/3,5 x 0,6 50/60/47 10 mm/M 2,5/3,5 x 0,6 800 V/24 A/2,5 mm2 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 0,4...0,8 1 0,4...0,8 1 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 32/24 32/24 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 32/24 32/24 A3 600 V/25 A/22...12 AWG 600 V/20 A/26...12 AWG W 2 A3 600 V/25 A/22...12 AWG 600 V/20 A/26...12 AWG Cat. No. Qty. 102000 100 102008 100 102006 100 W Cat. No. Qty. 157906 105640 900450 20 50 - 102070 10 102080 10 Type Cat. No. Qty. WAP 2.5-10 105000 50 WAP 2.5-10 105008 50 WTW 2.5-10 105010 20 WTW 2.5-10 105018 20 ZQV 2.5N Qty. WQV 2.5 Qty. 169380 60 105366 50 169381 60 105376 50 169382 60 105386 50 169383 20 105396 10 169384 20 105406 10 169385 20 105416 10 169386 20 105426 10 169387 20 105436 10 169388 20 105446 20 157760 10 169389 5 WQB B/24 157906 20 LS 2.8 105640 50 WAW 1 900450 - WTA 2 163232 WTA 2/ZA 163233 WTA 2/10 163234 ZE 1 (Strain relief)163215 50 50 5 50 WTA 2 163232 WTA 2/ZA 163233 WTA 2/10 163234 ZE 1 (Strain relief) 163215 50 50 5 50 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 018040 029380 021570 126980 20 20 50 50 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 018040 029380 021570 126980 20 20 50 50 WAD 5 WAD 5 white 105346 105606 50 50 WAD 5 WAD 5 white 105346 105606 50 50 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 ZQV 2.5NQty. 169380 60 169381 60 169382 60 169383 20 169384 20 169385 20 169386 20 169387 20 169388 20 169389 5 WQB B/24 LS 2.8 WAW 1 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 WQV 2.5Qty. 105366 50 105376 50 105386 50 105396 10 105406 10 105416 10 105426 10 105436 10 105446 20 157760 10 Tag carrier for S 10 markers Marking tags Print DEK Consecutive horizontal DEK 5 047346 DEK Consecutive vertical DEK 5 047356 WS WS 12/5 160986 WS DEK WS 12/5 144746 WS For further accessories see section 3, further marking material see section 8 - - - - - - - - When using the outer cross connection holes 2/5 Feed-through terminal blocks WDU 2.5N WDU 2.5N/10/BEZ WDU 1.5/ZZ W W Max. Technical Data Dimension Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 1/8.92 / IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage/pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating WQV/ZQV 2-5-pole A of cross-connection WQV/ZQV 6-10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Blue Wemid Orange PA Terminal block printed 1-9 Wemid Terminal block unprinted* Wemid End plate/partition WAP (thickness 1.5 mm) Wemid Blue Wemid WTW Wemid Blue Wemid Frame WDK 2.5 Cross-connection WQV WQB 8/24 Screen lug LS 2.8 2-pole 3-pole 4-pole 10-pole ZQV 2.5N Notching tool WAW 1 for WQV Test adapter WTA TA 1 Strain relief Test plug/socket PS 2.3 Abdeckungen WAD with symbol WAD white for self-labeling Group marking T5 StB 8.5 WDU 2.5 WDU 2.5/10/BEZ W W 26 A/2,5 mm2 26 A/2,5 mm2 32 A/4 mm2 32 A/4 mm2 5/44/37,5 10 mm/M 2,5/3,5 x 0,6 5/60/47 7 mm/M 2,5/3,5 x 0,6 5/60/47 10/7 mm/M 2,5/3,5 x 0,6 5/60/47 10 mm/M 2,5/3,5 x 0,6 500 V/24 A/2,5 mm2 6 kV/3 690 V/17,5 A/1,5 mm2 8 kV/3 690 V/24/17,5 A/2,5/1,5 mm2** 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,8 1 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,51) 0,13...4 0,5...2,5 1,5...2,5 0,5...1,5 0,5...1,5 0,5...1,51) 0,08...2,5 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,51) 0,13...4 32/24 32/24 24/- 24/- 32/24 32/24 0,5...4/2,5** 1,5...4/2,5** 0,5...4/1,5** 0,5...2,5/1,5** 0,5...2,5/1,5**/1) 0,13...4/0,08...2,5 32/24 32/24 300 V/20 A/22...12 AWG 300 V/20 A/26...12 AWG W Cat. No. Qty. 102370 100 102378 100 102376 100 102490 10 102480 10 Type Cat. No. Qty. WAP-WDU 2.5N 106000 50 WAP-WDU 2.5N 106008 50 TW (1,5) 019186 20 300 V/10 A/22...14 AWG 300 V/10 A/26...14 AWG W Cat. No. Qty. 103140 100 103148 100 300 V/20/15 A/22...12 AWG 300 V/20/15 A/26...12/14 AWG W Cat. No. Qty. 102470 100 102478 100 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 600 V/25 A/22...12 AWG 600 V/20 A/26...12 AWG W Cat. No. Qty. 102000 100 102008 100 102006 100 102070 10 102080 10 Type Cat. No. Qty. WAP 2.5-10 105000 50 WAP 2.5-10 105008 50 WTW 2.5-10 105010 20 WTW 2.5-10 105018 20 ZQV 2.5N Qty. 169380 60 169381 60 169382 60 169388 20 WQB B/24 LS 2.8 WAW 1 WQV 2.5 105366 105376 105386 105446 157906 105640 900450 ZQV 2.5N Qty. 169380 60 169381 60 169382 60 169388 20 WQB B/24 LS 2.8 WAW 1 WQV 2.5 Qty. 105366 50 105376 50 105386 50 105446 20 157906 20 105640 50 900450 - ZQV 2.5N Qty. 169380 60 169381 60 169382 60 169388 20 WQB B/24 LS 2.8 WAW 1 WQV 2.5 Qty. 105366 50 105376 50 105386 50 105446 20 157906 20 105640 50 900450 - 163232 163233 163234 163215 50 50 5 50 WTA 2 WTA 2/ZA WTA 2/10 ZE 1 163232 163233 163234 163215 50 50 5 50 018040 029380 021570 126980 20 20 50 50 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 018040 029380 021570 126980 20 20 50 50 A3 A1 Qty. 50 50 50 20 20 50 - A 3/A 1** A3 WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB B/24 105366 105376 105386 105446 157906 50 50 50 20 20 WAW 1 900450 - WTA 1 WTA 1/ZA 163229 163230 50 50 WTA 2 WTA 2/ZA 163232 163233 50 50 WTA 1/10 ZE 1 163231 163215 5 50 WTA 2/10 ZE 1 163234 163215 5 50 WTA 2 WTA 2/ZA WTA 2/10 ZE 1 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 018040 029380 021570 126980 20 20 50 50 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 018040 029380 021570 126980 20 20 50 50 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) WAD 4 107200 50 WAD 5 105346 50 WAD 4 white 107210 50 WAD 5 white 105606 50 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 WGB Tag carrier fur S 10 markers Marking tags Print DEK 5 047346 DEK Consecutive horizontal DEK 5 047356 DEK Consecutive vertical WS 12/5 160986 WS Blank WS 12/5 144746 WS DEK Printed WS For further accessories see section 3, further marking material see section 8 * With unprinted dekafix marking strips 1) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 2/6 WDU 2.5/1.5/ZR - - - - T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 100 033250 1000 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - ** Twin connection - - - - - - - - WDK 2.5 WDK 2.5/10/BEZ WDK 2.5 WDK 2.5 V WDK 2.5 DU-PE WDK 2.5 E WDU 4 WDK 2.5 E GET.SCH. WDU 4/10/BEZ 800 V Terminal blocks for electrical components 400 V W W W W W W Terminal blocks with electrical components see section 3 26 A/2,5 mm2 26 A/2,5 mm2 24 A/2,5 mm2 24 A/2,5 mm2/-/- -/2,5 mm2 46 A/6 mm2 5/69/63 10 mm/M 2,5/3,5 x 0,6 6/69/63 10 mm/M 2,5/3,5 x 0,6 5/69/63 10 mm/M 2,5/3,5 x 0,6 5/69/63 10 mm/M 2,5/3,5 x 0,6 5/69/63 10 mm/M 2,5/3,5 x 0,6 6/60/47 10 mm/M 3/3,5 x 0,6 400 V/24 A/2,5 mm2 6 kV/3 800 V/24 A/2,5 mm2 8 kV/3 400 V/24 A/2,5 mm2 6 kV/3 400 V/-/24 A/-/2,5 mm2 6 kV/3 -/-/2,5 mm2 -/- 800 V/32 A/4 mm2 8 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...1,0 2 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 32/- 32/- 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4 32/- 32/- 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 32/- 32/- 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 32/- 32/- 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 - - 0,5...6 1,5...6 0,5...6 0,5...4 0,5...4 0,13...6 46 46 A3 300 V/20 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102150 100 102158 100 102156 100 102560 10 102570 10 Type Cat. No. Qty. WAP 105910 20 WAP 105918 20 WTW 105880 20 A3 W Cat. No. Qty. 102910 100 Type WAP WAP WTW Cat. No. Qty. 105910 20 105918 20 105880 20 WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 LS 2.8 WAW 1 105366 105376 105386 105446 157900 105640 900450 50 50 50 20 20 50 - Q Q Q Q 2 3 4 10 036900 036910 036920 036930 50 50 50 20 LS 2.8 105640 50 TA 1 053586 20 TA 1 053586 20 A3 A3 A3 2 A4 300 V/20 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102230 100 300 V/20 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103640 100 (Beige Wemid with divided current bar below) 300 V/20 A/22...12 AWG W Cat. No. Qty. 102320 100 102310 100 (Beige Wemid with divided current bar below) 600 V/35 A/22...10 AWG 600 V/35 A/26...10 AWG W Cat. No. Qty. 102010 100 102018 100 102090 10 102100 10 Type WAP Cat. No. Qty. 105910 20 Type WAP Cat. No. Qty. 105910 20 WTW 105880 WTW 105880 Type WAP WAP WTW Cat. No. Qty. 105910 20 105918 20 105880 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Frame (5 mm) 107400 20 WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 LS 2.8 WAW 1 105366 105376 105386 105446 157900 105640 900450 50 50 50 20 20 50 - WQV WQV WQV WQV 105196 105456 105466 105206 50 50 50 20 LS 2.8 WAW 1 105640 900450 50 - TA 1 053586 20 WTA 3 WTA 3/ZA WTA 3/10 ZE 1 163235 163236 163237 163215 50 50 5 50 PS 2.3 (o 2,3) 018040 20 StB 8.5 (o 2,3) 028060 50 WAD 5 WAD 5 white 105346 105606 50 50 20 20 WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 LS 2.8 WAW 1 105366 105376 105386 105446 157900 105640 900450 50 50 50 20 20 50 - WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 105366 105376 105386 105446 157900 50 50 50 20 20 WAW 1 900450 - TA 1 053586 20 TA 1 053586 20 AD 3 HP 3 WAD 4 048540 048576 107200 - 20 50 AD 3 HP 3 WAD 4 048540 048576 107200 - 20 50 AD 3 HP 3 WAD 4 048540 048576 107200 - 20 50 AD 3 HP 3 WAD 4 048540 048576 107200 - 20 50 AD 3 HP 3 WAD 4 048540 048576 107200 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 6 DEK 6 WS 12/6 WS 12/6 046866 047356 160990 144766 - - - - - - - - - - - - - - - - - 20 50 4/2 4/3 4/4 4/10 - - - - - - - - 2/7 Feed-through terminal blocks WMA 4/5 WMA 4/4 WDU 6 WDU 6/10/BEZ WDU 10 UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version Wemid Blue Wemid Terminal block printed 1-9 Wemid Terminal block unprinted* Wemid Motor connection block (L1, L2, L3, PE) Wemid Motor connection block (L1, L2, L3, N, PE) Wemid End plate/partition WAP (thickness 1.5 mm) Wemid Blue Wemid WTW Wemid Blue Wemid Cross-connection WQV WQB 8/24 Screen lug LS 2.8 Notching tool WAW 1 for WQV Test adapter WTA WTA 3 Strain relief Test plug/socket PS 2.3 Abdeckungen WAD with symbol WAD white for self-labeling Group marking T5 StB 8.5 WGB Tag carrier fur S 10 markers Marking tags DEK DEK WS WS DEK Print Consecutive horizontal Consecutive vertical Blank Printed 46 A/6 mm2 63 A/10 mm2 85 A/16 mm2 82 A/25 mm2 60/60/47 10 mm/M 3/3,5 x 0,6 8/60/47 12 mm/M 3,5/4,0 x 0,8 10/60/47 12 mm/M 4/5,5 x 1,0 12/60/47 12 mm/M 4/5,5 x 1,0 800 V/32 A/4 mm2 8 kV/3 800 V/41 A/6 mm2 8 kV/3 1000 V/57 A/10 mm2 8 kV/3 400 V/76 A/16 mm2 6 kV/3 0,5...1,0 2 0,8...1,6 3 1,2...2,4 4 1,2...2,4 4 0,5...6 1,5...6 0,5...6 0,5...4 0,5...4 0,13...6 46 46 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 63 63 1,5...16 1,5...16 1,5...16 1,5...16 1,5...16 1,31...16 85 63 1,5...16 1,5...25 1,5...16 1,5...16 1,5...16 1,5...25 76 57 (3 + 4-pole) A4 600 V/35 A/22...10 AWG 600 V/35 A/26...10 AWG W Cat. No. Qty. A5 B6 600 V/45 A/20...8 AWG 600 V/45 A/20...8 AWG W Cat. No. Qty. 102020 50 102028 50 102140 10 102130 10 600 V/60 A/16...6 AWG 600 V/65 A/16...6 AWG W Cat. No. Qty. 102030 50 102038 50 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 103400 20 103380 20 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 WQV WQV WQV WQV 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV 105236 105476 105486 105226 50 50 50 20 WQV WQV WQV WQV 105256 105496 105506 105246 50 50 50 20 LS 2.8 WAW 1 105640 900450 50 - LS 2.8 WAW 1 105640 900450 50 - LS 2.8 WAW 1 105640 900450 50 - WTA 3 WTA 3/ZA WTA 3/10 ZE 1 163235 163236 163237 163215 50 50 5 50 WTA 5/1 105126 25 WTA 5/1 105126 25 PS 2.3 (o 2,3) 018040 20 StB 8.5 (o 2,3) 028060 50 PS 2.3 (o 2,3) PS 4 (o 4) StB 8.5 (o 2,3) StB 14 (o 4) 018040 029960 028060 016990 20 20 50 50 PS 2.3 (o 2,3) PS 4 (o 4) StB 8.5 (o 2,3) StB 14 (o 4) 018040 029960 028060 016990 WAD 5 WAD 5 white 105346 105606 50 50 WAD 8 WAD 8 white 105356 105616 50 50 WAD 8 WAD 8 white WGB 5 105076 50 WGB 8 105096 50 T5 034850 100 T5 034850 100 SF 10 SG 10 033240 1000 033250 1000 SF 10 SG 10 FW 6 FS 6 WS 12/6 WS 12/6 046866 047356 160990 144766 FW 8 FS 8 WS 12/6,5 WS 12/6,5 4/2 4/3 4/4 4/10 WS For further accessories see section 3, further marking material see section 8 * With unprinted dekafix marking strips 2/8 W W W Max. Technical Data Dimension Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 1/8.92 / IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage/pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating WQV/ZQV 2-pole A of cross-connection WQV/ZQV 3-10-pole A WDU 16N - - - - 6/2 6/3 6/4 6/10 B7 W Cat. No. Qty. 103610 50 103618 50 Type Cat. No. Qty. WTW EX 105880 20 WQV 16N/2 WQV 16N/3 WQV 16N/4 163656 163657 163658 50 50 50 WAW 1 900450 - 20 20 50 50 PS 2.3 (o 2,3) PS 4 (o 4) StB 8.5 (o 2,3) StB 14 (o 4) 018040 029960 028060 016990 20 20 50 50 105356 105616 50 50 WAD 12 N 107320 WAD 12 N white 107329 WGB 8 105096 50 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 127696 128966 160992 156895 FW 5 FS 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - 10/2 10/3 10/4 10/10 - - - - 50 50 - - - - WDU 16 WDU 16/ZA* WDU 35N W W WDU 35 WDU 35/ZA* WDU 70N W W W 100 A/25 mm2 100 A/25 mm2 -/- 168 A/50 mm2 168 A/50 mm2 207 A/95 mm2 12/60/63 16 mm/M 5/5,5 x 1,0 12/60/63 16 mm/M 5/5,5 x 1,0 16/66/51 18 mm/M 6/5,5 x 1,0 16/60/63 18 mm/M 6/5,5 x 1,0 16/60/63 18 mm/M 6/5,5 x 1,0 20,5/75/86 22 mm/M 8/S 6 DIN 6911 1000 V/76 A/16 mm2 8 kV/3 1000 V/76 A/16 mm2 8 kV/3 400 V/125 A/35 mm2 6 kV/3 1000 V/125 A/35 mm2 8 kV/3 1000 V/125 A/35 mm2 8 kV/3 1000 V/192 A/70 mm2 8 kV/3 2,0...4,0 - 2,0...4,0 - 2,5...5,0 - 5,0 / 5,0...6,0** - 5,0 / 5,0...6,0** - 6,0...12 - 1,5...16 1,5...25 1,5...25 1,5...16 1,5...16 1,5...25 85 63 1,5...16 1,5...25 1,5...25 1,5...16 1,5...16 1,5...25 85 63 2,5...16 2,5...50 2,5...35 2,5...35 2,5...35 2,5...50 115 100 2,5...16 2,5...50 2,5...35 2,5...35 2,5...35 2,5...50 138 112 2,5...16 2,5...50 2,5...35 2,5...35 2,5...35 2,5...50 138 112 10...16 10...95 10...70 10...70 10...70 10...95 192 192 (3-pole) B7 600 V/70 A/14...6 AWG 600 V/65 A/14...6 AWG W Cat. No. Qty. 102040 50 102048 50 B7 600 V/70 A/14...6 AWG 600 V/65 A/14...6 AWG W Cat. No. Qty. 102890 50 102898 50 Type WAP 16-35 WAP 16-35 Cat. No. Qty. 105010 20 105018 20 Type WAP 16-35 WAP 16-35 Cat. No. Qty. 105010 20 105018 20 WQV WQV WQV WQV WQV 105326 105516 105526 105336 105328 50 50 50 10 50 WQV WQV WQV WQV WQV 105326 105516 105526 105336 105328 50 50 50 10 50 900450 - 900450 - 16/2 16/3 16/4 16/10 16/2 blue WAW 1 16/2 16/3 16/4 16/10 16/2 blue WAW 1 B9 W Type WQV 35N/2 WQV 35N/3 WQV 35N/4 Cat. No. Qty. 104040 25 104048 25 Cat. No. Qty. 107920 107930 107940 50 50 50 B9 B9 600 V/115 A/12...2 AWG 600 V/120 A/12...2 AWG W Cat. No. Qty. 102050 25 102058 25 (hexagon socket)102060** 25 (hexagon socket)102068** 25 600 V/115 A/12...2 AWG 600 V/120 A/12...2 AWG W Cat. No. Qty. 102880 25 102888 25 (hexagon socket)102900** 25 (hexagon socket)102908** 25 Type WAP 16-35 WAP 16-35 Cat. No. Qty. 105010 20 105018 20 Type WAP 16-35 WAP 16-35 Cat. No. Qty. 105010 20 105018 20 WQV WQV WQV WQV WQV 105306 105536 105546 105316 105308 50 50 50 10 50 WQV WQV WQV WQV WQV 105306 105536 105546 105316 105308 50 50 50 10 50 900450 - 900450 - 35/2 35/3 35/4 35/10 35/2 blue WAW 1 35/2 35/3 35/4 35/10 35/2 blue WAW 1 2 B 11 600 V/175 A/6...2/0 AWG 600 V/205 A/8...2/0AWG W Cat. No. Qty. 951219 10 951242 10 (WDU 70N only with hexagon socket) Type WQV 70N/2 WQV 70N/3 WQV 70N/4 Cat. No. Qty. 951224 951225 953129 5 5 5 Auxil./control conduc. term. WZAD 70N 951228 10 PS 4 (o 4) 029960 20 PS 4 (o 4) 029960 20 PS 4 (o 4) 029960 20 PS 4 (o 4) 029960 20 PS 4 (o 4) 029960 20 StB 16 (o 4) 014020 50 StB 16 (o 4) 014020 50 StB 16 (o 4) 014020 50 StB 16 (o 4) 014020 50 StB 16 (o 4) 014020 50 PS 4 (o 4) 029960 20 Insertable in screw head of connection system WAD 12 105596 WAD 12 white 105626 50 50 WAD 12 105596 WAD 12 white 105626 50 50 WAD 12 105596 WAD 12 white 105626 50 50 WAD 12 105596 WAD 12 white 105626 50 50 WAD 20 951226 WAD 20 white 951227 20 20 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - * with spigots - - - - - - - - - - - - - - - - - - - - ** Tightening torque range 5,0...6,0 for Cat. No. 102060, 102068, 102900 and 102908 only 2/9 Feed-through terminal blocks Large size conductors no longer have to be inserted into the clamping point with force; they can simply be placed in the terminal block. For each terminal type, terminal block variants consisting of three, four and five-pole terminal blocks are available in addition to the individual terminals. All blocks are permanently screwed together for additional torsional rigidity. Slots provided in the underside of the terminals enable direct fitting. Terminal blocks can be screwed directly to mounting plates with 25 mm pitch. Further advantages are: * Constant force transmission by selfadjusting connection system * Random wiring direction * Safe from finger-touch (VBG 4), even with cross-connection fitted * Extreme distortion resistance Open terminal cover, remove screw terminal unit WDU 70/95 Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 1/8.92 / IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage/pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Strips mm Strips mm Gauge pin to 947-1 Size Max. Clamping Range in mm2 Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Hexagon socket 6 mm Wemid Hexagon socket 6 mm Blue Wemid Hexagon socket 6 mm Green Wemid Hexagon socket 6 mm Terminal block* 3-pole Wemid Hexagon socket 6 mm Terminal block* 4-pole Wemid Hexagon socket 6 mm Terminal block* 5-pole Wemid Mains terminal block 3x beige, 1x blue, 1x green Wemid Cross-connection Auxiliary / control conductor terminal WFL pressure clamp*** WFL 250 A/95 mm2 27/132/108 30 mm/M 8/S 6 1000 V/232 A/95 mm2 8 kV/3 6...12 - 16 16...120** 16...95** 35...95** 35...50 3 x 9 x 0,8 4 x 16 x 0,8 16...120 232 (3) 232 600 V/175 A/6...2/0 AWG 600 V/205 A/6...2/0 AWG W 6 x 9 x 0,8 6 x 16 x 0,8 B 12 Cat. No. 102460 102468 102465 Qty. 10 10 10 Type WQV 70/2 WQV 70/3 Cat. No. 106350 106360 Qty. 5 5 WZAD 70 WFL 70/95 106600 161633 10 10 WAD 27 with warning tag 106286 10 WAD 27 without warning tag 106296 10 Cover Yellow White Test plug Place conductor in terminal, replace screw terminal unit PS 4 029960 fits into screw head of the connection system 20 M 6x16 106370 20 Hex. key 6 mm to DIN 6911 040790 - SD 902450 - Fixing screw For direct assembly Hexagon key Screwdriver for direct assembly 1 x 5.5 x 125 Close terminal cover, tighten screw with hex key 2/10 Marking tags Print DEK Consecutive horizontal DEK 5 047346 DEK Consecutive vertical DEK 5 047356 WS Blank WS 12/6,5 160992 WS DEK Printed WS 12/6,5 156895 WS For further accessories see section 3, further marking material see section 8 * Terminal block for direct assembly only *** The WFL pressure clamp is needed when the flat strip cannot be inserted centrically. ** Using 95 and 120 mm2 with 10 Nm tightening torque - - - - WDU 70/95/... 70/95/... WDU 120/150 Drilling plan for direct mounting 250 A/95 mm2 335 A/150 mm2 WDU 120/150/... 120/150/... X Drilling plan for direct mounting 335 A/150 mm2 81/132/108 (triple block)* 30 mm/M 8/S 6 32/132/118 35 mm/M 10/S 6 96/132/118 (triple block)* 35 mm/M 10/S 6 1000 V/232 A/95 mm2 8 kV/3 1000 V/269 A/120 mm2 8 kV/3 1000 V/269 A/120 mm2 8 kV/3 6...12 - 10...20 - 10...20 - 16 16...120** 16...95** 35...95** 35...50 3 x 9 x 0,8 4 x 16 x 0,8 16...120 232 (3) 232 - 35...150 35...150 - - 3 x 9 x 0,8 4 x 16 x 0,8 35...150 292 (3) 292 - 35...150 35...150 - - 3 x 9 x 0,8 4 x 16 x 0,8 35...150 292 (3) 292 6 x 9 x 0,8 6 x 16 x 0,8 B 12 600 V/175 A/6...2/0 AWG 600 V/205 A/6...2/0 AWG Best-Nr. Qty. Type WQV 70/2 WQV 70/3 102670* 102680* 102690* 103230* Cat. No. 106350 106360 4 3 2 2 Qty. 5 5 WZAD 70 WFL 70/95 106600 161633 WAD 27 with warning tag WAD 27 without warning tag 600 V/225 A/2...MCM 250 AWG 600 V/285 A/2...MCM250 AWG W 6 x 9 x 0,8 6 x 16 x 0,8 B 13 2 6 x 9 x 0,8 6 x 16 x 0,8 B 13 600 V/225 A/2...MCM 250 AWG 600 V/285 A/2...MCM 250 AWG Cat. No. 102450 102458 102455 Qty. 10 10 10 Qty. 5 5 Cat. No. Qty. Type WQV 120/2 WQV 120/3 102640* 102650* 102660* 103240* Cat. No. 106330 106340 3 2 2 2 Qty. 5 5 Type WQV 120/2 WQV 120/3 Cat. No. 106330 106340 10 10 WZAD 120 WFL 120/150 106610 161634 10 10 WZAD 120 WFL 120/150 106610 161634 10 10 106286 10 WAD 27 with warning tag 106286 10 WAD 27 with warning tag 106286 10 106296 10 WAD 27 without warning tag 106296 10 WAD 27 without warning tag 106296 10 PS 4 029960 Insertable in screw head connection system 20 PS 4 029960 Insertable in screw head connection system 20 PS 4 029960 Insertable in screw head connection system 20 M 6x16 106370 20 M 6x16 106370 20 M 6x16 106370 20 Hexagon key 6 mm to DIN 6911 040790 - Hexagon key 6 mm to DIN 6911 040790 - Hexagon key 6 mm to DIN 6911 040790 - SD 902450 - SD 902450 - SD 902450 - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - 2/11 Tab connection terminals WFF 35 WFF 70 W Max. Technical Data Dimensions Width/length/height (mm) without WAH Width/length/height (mm) with WAH Bolt size M VDE rated data, 0611, Part 1/8.92 / IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage/pollution severity Further technical data Tightening torque range Nm Clampable conductor Cable lug DIN 46235 mm2 Cable lug DIN 46234 mm2 2 x cable lug DIN 46235 mm2 2 x cable lug DIN 46234 mm2 Strips mm Strips mm Strips mm Max. Connection Area in mm2 Gauge for flat connections to EN 50043 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection 3-pole A UL / CSA rated data Voltage/current/conductor size UL Voltage/current/conductor size CSA Ordering data Version Wemid Blue Wemid With covers Wemid Wemid Partition (thickness 2 mm) Cross-connection WQL W 168 A/50 mm2 250 A/95 mm2 27/107/54 27/136/60 6 32/132/63 32/179/71,5 8 1000 V/125 A/35 mm2 8 kV/3 1000 V/192 A/70 mm2 8 kV/3 3.0...6.0 6.0...12 6...25 2,5...50 6...25 2,5...35 3 x 13 x 0,5 6 x 13 x 0,5 2 x 15,5 x 0,8 2,08...50 C4 135 135 16...70 2,5...120 16...70 2,5...70 2 x 15,5 x 0,8 4 x 15,5 x 0,8 6 x 15,5 x 0,8 2,08...120 C6 207 207 600 V/115 A/14...2 AWG 600 V/130 A/14...2 AWG W 600 V/175 A/14...2/0 AWG 600 V/170 A/14...2/0 AWG W 4 x 20 x 1 Cat. No. 102840 102848 102940 Qty. 10 10 10 Type WTW WFF 70 Cat. No. 106720 Qty. 10 5 5 WQL 2/70 WQL 3/70 106500 106550 5 5 107050 10 WZAF 70 106620 10 106446 106448 106445 106970 20 20 20 20 WAH 70 WAH 70 BL WAH 70 HG WAP* 106456 106458 106455 106980 20 20 20 20 WD 1 156390 Qty. = 5 cards with 6 lables on each 5 WD 1 156390 Qty. = 5 cards with 6 lables on each 5 Cat. No. 102830 102838 102930 Qty. 10 10 10 Type WTW WFF 35 Cat. No. 106710 Qty. 10 WQL 2/35 WQL 3/35 106490 106540 WZAF 35 WAH 35 WAH 35 BL WAH 35 HG WAP* Auxiliary / control conductor terminal Cover Beige PA 66 Blue PA 66 Light-green PA 66 Warning sign Yellow, Self-adhesive With lightning flash Can be stuck to WAH only Screwdriver / Fixing screw M 6 x 16 SD 106370 902450 20 - M 6x16 SD 106370 902450 20 - For aluminium conductors CPSB M 6 015620 50 CPSB M 8 015630 50 Print Consecutive horizontal Consecutive vertical Blank Printed DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - For direct assembly Screwdriver Cupal washers Marking tags DEK DEK WS WS DEK WS For further accessories see section 3, further marking material see section 8 * The WAP can be used only in conjunction with the WAH. In the event that no conductor is connected, it guarantees shock protection in the connection area. 2/12 WFF 120 WFF 185 / WFF 185 M 12 + M 16 WFF 300 W W W 335 A/150 mm2 453 A/240 mm2 630 A 42/132/72 42/230/81 10 55/163/78 55/287/91 12 55/163/86 55/287/90 16 1000 V/269 A/120 mm2 8 kV/3 1000 V/353 A/185 mm2 8 kV/3 1000 V/520 A/300 mm2 8 kV/3 10...20 14...31 25...60 16...150 6...150 16...120 6...120 2 x 20 x 1 6 x 20 x 1 5 x 24 x 1 5,26...150 292 292 25...240 10...240 25...185 10...185 2 x 24 x 1 2 x 32 x 1 3 x 35 x 1 8,37...240 382 382 50...300 25...240 50...240 25...240 2 x 40 x 1 6 x 40 x 1 8 x 40 x 1 13,3...300 520 520 600 V/310 A/10...MCM 250 AWG 600 V/310 A/10...MCM 250 AWG W C8 Cat. No. 102850 102858 102950 Qty. 5 5 600 V/380 A/8...MCM 500 AWG 600 V/360 A/8...MCM 500 AWG W C 11 Cat. No. 102860 102868 Qty. 4 4 (M12+M16) Type WTW WFF 185 102960 102865 Cat. No. 106740 4 4 Qty. 10 WQL 2 WQL 3 106520 106570 5 Qty. 10 10 x 24 x 1 6 x 32 x 1 600 V/500 A/6...MCM 600 AWG 600 V/510 A/6...MCM 600 AWG W 2 3 x 35 x 1 8 x 32 x 1 - Cat. No. 102870 102878 102970 Qty. 4 4 4 Type WTW WFF 300 Cat. No. 106740 50 50 WQL 2 WQL 3 106530 106580 50 50 106640 10 WZAF 300 106650 10 106476 106478 106475 10 10 10 WAH 185/300 WAH 185/300 BL WAH 185/300 HG 106476 106478 106475 10 10 10 WD 1 156390 Qty. = 5 cards with 6 lables on each 5 WD 1 156390 Qty. = 5 Karten mit je 6 Einzelschildern 5 Type WTW WFF 120 Cat. No. 106730 WQL 2/120 WQL 3/120 106510 106560 5 5 WZAF 120 106630 10 WZAF 185 WAH 120 WAH 120 BL WAH 120 HG WAP* 106466 106468 106465 107300 20 20 20 20 WAH 185/300 WAH 185/300 BL WAH 185/300 HG WD 1 156390 Qty. = 5 cards with 6 lables on each 5 Qty. 10 M 6x16 SD 106370 902450 20 - M 6x16 SD 106370 902450 20 - M 6x16 SD 106370 902450 20 - CPSB M 10 015640 50 CPSB M 12 015650 20 CPSB M 16 015650 20 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - 2/13 Protective conductor terminal blocks WPE 2.5N WPE 1.5/ZZ W Dimensions Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 3/11.89Rated voltage / current for PEN / cross-section Rated voltage/impulse voltage/pollution severity adjacent terminal Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 AWG conductor No. Max. Clamping Range in mm2 Gauge pin to 947-1 Size Ordering data Green/yellow Wemid Support block1) Marking tags DEK DEK WS Consecutive horizontal Consecutive vertical Blank WS Printed DEK WPE 2.5/1.5/ZR W W 5/54/37,5 10 mm/M 2,5/3,5 x 0,6 5/60/47 7 mm/M 2,5/3,5 x 0,6 5/60/47 10 mm/M 2,5/3,5 x 0,6 5/60/47 10/7 mm/M 2,5/3,5 x 0,6 - V/- A/2,5 mm2 500 V/6 kV/3 - V/- A/1,5 mm2 690 V/8 kV/3 - V/- A/2,5 mm2 800 V/8 kV/3 - V/- A/2,5/1,5 mm2 690 V/8 kV/3 0,4...0,7 1/1 0,4...0,7 1/1 0,4...0,7 1/1 0,4...0,7 1/1 0,5...4 1,5...4 0,5...4 0,5...4 0,5...2,55) 26...12 0,13...4 W 0,5...2,5 1,5...2,5 0,5...1,5 0,5...1,5 0,5...1,55) 26...14 0,08...2,5 W 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,55) 26...12 0,13...4 W Type SH 2 A3 Cat. No. Qty. 101000 100 Cat. No. Qty. 049492 10 0,5...4/2,5 1,5...4/2,5 0,5...4/1,5 0,5...2,5/1,5 0,5...2,5/1,55) 26...12/14 0,13...4/0,08...2,5 A 3/A 1 W Cat. No. Qty. 101640 100 Type Cat. No. Qty. SH 2 049492 10 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 12/5 WS 12/5 Type SH 2 A3 Cat. No. Qty. 101620 100 Cat. No. Qty. 049492 10 Type SH 2 A1 Cat. No. Qty. 101650 100 Cat. No. Qty. 049492 10 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - - - - - - - - - 047346 047356 160986 144746 WPE 16N Dimensions Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611, Part 3/11.89Rated voltage / current for PEN / cross-section Rated voltage/impulse voltage/pollution severity adjacent terminal Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 AWG conductor No. Max. Clamping Range in mm2 Gauge pin to 947-1 Size Ordering data Green/yellow Wemid with hexagon socket Support block1) Marking tags DEK DEK WS Consecutive horizontal Consecutive vertical Blank WS Printed WS WPE 16 WPE 35N W W W W 10/60/47 12 mm/M 4/5,5 x 1,0 12/60/47 12 mm/M 4/5,5 x 1,0 12/60/63 16 mm/M 5/5,5 x 1,0 16/66/51 18 mm/M 6/5,5 x 1,0 - V/57 A/10 mm2 800 V/8 kV/3 - V/76 A/16 mm2 400 V/6 kV/3 - V/76 A/16 mm2 800 V/8 kV/3 - V/125 A/35 mm2 400 V/6 kV/3 1,2...2,4/0,5...1,0* 3/2 1,2...2,4/0,5...1,0* -/4 2,0...4,0/1,2...2,4* -/4 2,5...5,0/1,2...2,4* -/4 1,5...16 1,5...16 1,5...16 1,5...16 1,5...16 16...8 1,31...16 W 1,5...16 1,5...25 1,5...16 1,5...16 1,5...16 14...6 1,5...25 W 1,5...16 1,5...16 1,5...16 1,5...16 1,5...16 14...6 1,5...25 W 2,5...16 2,5...50 2,5...35 2,5...35 2,5...35 B6 Cat. No. Qty. 101030 50 Type SH 2 External WQB-PEN 10 Cat. No. Qty. 049492 10 106030 10 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - B7 Cat. No. Qty. 1019103) 50 B7 Cat. No. Qty. 101040 50 2,5...50 W Type Cat. No. Qty. SH 2 049492 10 External WQB-PEN 35N 107950 10 Type Cat. No. Qty. SH 2 049492 10 Internal WQV 16N-PEN 1071364) 10 Type SH 2 External WQB-PEN 16 Cat. No. Qty. 049492 10 106020 10 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - 127696 128966 160992 156895 - - - - DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 B9 Cat. No. Qty. 171774 25 127696 128966 160992 156895 For further accessories see section 3, further marking material see section 8 1) 2) For insulated arrangement of mounting rails in totally insulated systems Insertable link in a TN C distribution network between N terminal (WDU blue) and PE terminal (WPE) 2/14 - - - - WS WPE 10 DEK WPE 2.5 3) 4) Yellow side open, see fitting note, page 6/11 For PEN link in conjunction with WQV 16 N, connect neutral conductor between PE and phase. 5) 6) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 Using 35 mm2 with 5 Nm tightening torque - - - - WDK 2.5 PE WDK 2.5 DU-PE** WPE 4 WPE 6 W W 5/69/63 10 mm/M 2,5/3,5 x 0,6 5/69/63 10 mm/M 2,5/3,5 x 0,6 6/60/47 10 mm/M 3/3,5 x 0,6 8/60/47 12 mm/M 3,5/4,0 x 0,8 - V/- A/2,5 mm2 400 V/6 kV/3 - V/- A/2,5 mm2 400 V/6 kV/3 - V/- A/4 mm2 800 V/8 kV/3 - V/- A/6 mm2 800 V/8 kV/3 0,4...0,7 1/1 0,4...0,7 1/1 0,5...1,0/0,5...1,0* 1/1 0,8...1,6/0,5...1,0* 3/2 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,55) 22...12 0,13...4 W 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,55) 22...12 0,13...4 W 0,5...6 1,5...6 0,5...6 0,5...4 0,5...4 26...10 0,13...4 W 0,5...6 1,5...6 0,5...10 0,5...6 0,5...6 26...8 0,5...10 W W Type SH 2 A3 Cat. No. Qty. 103630 100 Cat. No. Qty. 049492 10 Type SH 2 A3 Cat. No. Qty. 103640 100 Cat. No. Qty. 049492 10 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 - - - - WPE 35 - - - - WPE 70N W 2 Type SH 2 A4 Cat. No. Qty. 101010 100 Cat. No. Qty. 049492 10 Type SH 2 A5 Cat. No. Qty. 101020 100 Cat. No. Qty. 049492 10 DEK 6 DEK 6 WS 12/6 WS 12/6 046866 046876 160990 144766 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - WPE 70/95 W - - - - WPE 120 W W 16/60/63 18 mm/M 6/5,5 x 1,0 20,5/75/86 22 mm/M 8/S 6 DIN 6911 27/132/108 30 mm/M 8/S 6 DIN 6911 32/132/118 35 mm/M 10/S 6 DIN 6911 - V/125 A/35 mm2 800 V/8 kV/3 - V/192 A/70 mm2 1000 V/8 kV/3 - V/232 A/95 mm2 1000 V/8 kV/3 - V/269 A/120 mm2 1000 V/8 kV/3 2,5...5,0/1,2...2,4* -/4 6,0...12/2,0...4,0* 6,0...12/3,0...6,0* 10...20/3,0...6,0* 2,5...16 2,5...356) 2,5...356) 2,5...356) 2,5...356) 12...2 2,5...35 W 10...16 10...95 10...70 10...70 10...70 8...2/0 10...95 B 11 W in Cu only Cat.No. Qty. 951220 10 16 16...120*** 16...95*** 35...95*** 35..50 6...2/0 16...120 B 12 W in Cu only Cat.No. Qty. - 35...150 35...150 - - 2...MCM 250 35...150 B 13 W in Cu only Cat.No. Qty. Type Cat. No. Qty. SH 2 049492 10 Internal WQV 70N-PEN 952584 5 Type SH 2 Internal WQV 70/95-PEN 107230 5 WQV 120-PEN 107240 5 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - Type SH 2 External WQB-PEN 35 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 B9 Cat. No. Qty. 101050 25 101260 25 Cat. No. Qty. 049492 10 106010 10 127696 128966 160992 156895 - - - - * applies to centre screw 127696 128966 160992 156895 - - - - 103730 10 Cat. No. Qty. 049492 10 047346 047356 160992 156895 Type SH 2 Internal 101970 10 Cat. No. Qty. 049492 10 ** see also page 2/7 *** using 95 mm2 and 120 mm2 with 10 Nm tightening torque 2/15 Isolating neutral terminal blocks WNT 2.5 WNT 4 W W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7.5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611 Part 5 / 5.84 Rated voltage/rated current/rated cross-section Rated voltage/impulse voltage/pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version For 10x3 busbars Blue Wemid For 10x3 busbars as equipotential bonding disconnector beige Wemid (VDE 0107) WNT 6 WNT 10 W W 32 A/4 mm2 41 A/6 mm2 57 A/10 mm2 76A/16 mm2 5/60/47 10 mm/M 2,5/3,5 x 0,6 6/60/47 10 mm/M 3/3,5 x 0,6 8/60/47 12 mm/M 3,5/4,0 x 0,8 10/60/47 12 mm/M 4/5,5 x 1,0 400 V/24 A/2,5 mm2 400 V/6 kV/3 400 V/32 A/4 mm2 400 V/6 kV/3 400 V/41 A/6 mm2 400 V/6 kV/3 400 V/57 A/10 mm2 400 V/6 kV/3 0,4...0,8 1 0,5...1,0 2 0,8...1,6 3 1,2...2,4 4 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,51) 0,13...4 0,5...6 1,5...6 0,5...6 0,5...4 0,5...4 0,13...6 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 1,5...16 1,5...16 1,5...16 1,5...16 1,5...16 1,31...16 A3 600 V/25 A/22...12 AWG 600 V/20 A/26...12 AWG W Cat. No. Qty. 101068 100 101060 A4 600 V/35 A/22...10 AWG 600 V/35 A/26...10 AWG W Cat. No. Qty. 101078 100 100 101070 A5 600 V/45 A/20...8 AWG 600 V/45 A/20...8 AWG W Cat. No. Qty. 101088 50 100 101080 B6 600 V/60 A/16...8 AWG 600 V/65 A/16...6 AWG W Cat. No. Qty. 101098 50 50 101090 50 Blue Wemid Beige Wemid Type WAP 2.5-10 WAP 2.5-10 Cat. No. Qty. 105008 50 105000 50 Type WAP 2.5-10 WAP 2.5-10 Cat. No. Qty. 105008 50 105000 50 Type WAP 2.5-10 WAP 2.5-10 Cat. No. Qty. 105008 50 105000 50 Type WAP 2.5-10 WAP 2.5-10 Cat. No. Qty. 105008 50 105000 50 Support plate fur SSch 10 x 3 Blue Wemid beige Wemid WHP 2.5-10 WHP 2.5-10 105028 105020 20 20 WHP 2.5-10 WHP 2.5-10 105028 105020 20 20 WHP 2.5-10 WHP 2.5-10 105028 105020 20 20 WHP 2.5-10 WHP 2.5-10 105028 105020 20 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m End plate Thickness 1.5 mm Thickness 1.5 mm Distance WHP-WHP max. 200 mm Busbar 10 x 3 Topface busbar till topface TS 35 = 25.5 mm Cu 140 A Ms 100 A Clamping yoke Applied input for SSch 10 x 3 16...50 mm2 stranded 16...35 mm2 flexible Gauge pin to B9 ZB 35 K ZB 35 K ZB 35 050268 026650 20 20 ZB 35 K ZB 35 050268 026650 20 20 ZB 35 K ZB 35 050268 026650 20 20 ZB 35 K ZB 35 050268 026650 20 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 DEK 6 DEK 6 WS 12/6 WS 12/6 046866 046876 160990 144766 - - - - DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - ZB 35 Test plug End bracket Using external link Clampable cond. section one degree lower Marking tags Print DEK 5 047346 DEK Consecutive horizontal DEK 5 047356 DEK Consecutive vertical WS 12/5 160986 WS Blank WS WS 12/5 144746 WS DEK Printed For further accessories see section 3, further marking material see section 8 1) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 2/16 - - - - WNT 16 N WNT 35 N WNT 70 N -/- -/- 207 A/95 mm2 12/60/47 12 mm/M 4/5,5 x 1,0 16/66/51 18mm/M 6/5,5 x 1,0 20,5/75/86 22 mm/M 8/S 6 DIN 6911 400 V/76 A/16 mm2 400 V/6 kV/3 400 V/125 A/35 mm2 400 V/6 kV/3 400 V/192 A/70 mm2 400 V/6 kV/3 1,2...2,4 4 2,5...5 - 6,0...12 - 1,5...16 1,5...25 1,5...16 1,5...16 1,5...16 1,5...25 2,5...16 2,5...50 2,5...35 2,5...35 2,5...35 2,5...35 10...16 10...95 10...70 10...70 10...70 10...95 W W B7 B9 2 B 11 W Cat. No. Qty. 101900 50 W Cat. No. Qty. 171855 10 W Cat. No. Qty. 951221 10 Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. WHP 2.5-10 105028 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m ZB 35 K ZB 35 050268 026650 20 20 WHP 2.5-10 105028 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m ZB 35 K ZB 35 050268 026650 20 20 WHP 2.5-10 105028 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m ZB 35 K ZB 35 050268 026650 20 20 TN-S-System PS 2.3 018040 20 PS 2.3 018040 20 PS 4 029960 20 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WQB-PEN 16N 107960 10 WQB-PEN 35N 107950 10 WQB-PEN 70N 107970 10 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - Input TN-C-System from 16 mm2 on PEN bridge 2/17 Three-way terminal blocks for N-busbar 10 x 3 Terminals/accessories WDL 2.5/S/ NT/L/PE WDL 2.5/S/ L/L W Installation specifications for power systems up to 1000 V to VDE 0100 (IEC 364) require that the installed system be subjected to an insulation measurement test. Special specifications stipulate an insulation measurement for all outgoing conductors (L 1, L 2, L 3, N) without making any disconnections. The WDL three-way terminal block meets these requirements. Circuits can be connected on three levels across a width of only 6 mm in a clear and space-saving manner. Two independent terminals strips with disconnect elements and a cross-connection system of the N conductor are available: WDL 2.5/S... N cross-connection with the proven 10 x 3 mm busbar system up to 140 A. The busbar is fed by a separate clamping yoke (ZB 4-ZB 16) or an N disconnect terminal of the WNT series. W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade 32 A/4 mm2 32 A/4 mm2 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 Rated data Rated voltage/rated current/rated cross-section Rated voltage/impulse voltage/pollution severity VDE 0611 Part 4 250V/400V/24 A/2,5 mm2 250V/400 V/4 kV/3 IEC 947-7-1 400 V/24 A/2,5 mm2 400 V/6 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection Q multipole A UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version for TS 35 / Wemid 0,13...4 24 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103060 50 (NT-Connection coded blue) Type End plate A3 Cat. No. Qty. 0,13...4 24 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103120 50 Type Cat. No. Qty. WDL 2.5/S/L/L Three-phase circuits can be implemented by combining three-way terminals (L 1, N, PE) and WDL 2.5/(S/)L/L two-way terminals (L 2, L 3). WAP WDL 2.5/S 106770 20 WHP WDL 2.5/S 106798 20 WAP WDL 2.5/S 106770 20 Support plate Distance WHP-WHP max. 200 mm for SSch 10 x 3 Wemid blue Thickness 1,5 mm Small partition for Q TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 WEW 35 / 2 106120 50 DEK 6 DEK 6 046866 046876 500 500 Cross-connection (L/N/NT) 2 3 4 10 20 2 3 4 10 20 Busbar 10 x 3 Topface busbar till topface TS 35 = 25,5 mm Cu 140 A Ms 100 A Clamping yoke ZB 35 K 050268 50 WNT 10 WNT 16 N WNT 70 N 101098 101900 951221 50 50 10 WEW 35 / 2 106120 50 Marking tags Print DEK 6 046866 DEK Consecutive horizontal DEK 6 046876 DEK Consecutive vertical For further accessories see section 3, further marking material see section 8 500 500 supply for 10 x 3 busbar 16...50 mm2 stranded 16...35 mm2 flexible Lehrdorn B9 Abb. fehlt Neutral (N) disconnect terminals as supply terminals End bracket 2/18 WDL 2.5/S-Blocke WDL 2.5/S/N WDL 2.5/S/L WDL 2.5/S/ N/L for one three-phase circuit for three AC circuits W W WDL 2.5/S/ N/L/PE WDL 2.5/S/ L/L/PE W W W 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 12/18/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 6/84,5/48,7 8 mm/M 2,5/3,5 x 0,6 250V/400V/24 A/2,5 mm2 250V/400V/4 kV/3 IEC 947-7-1 400 V/24 A/2,5 mm2 400 V/6 kV/3 IEC 947-7-1 400 V/24 A/2,5 mm2 400 V/6 kV/3 IEC 947-7-1 400 V/24 A/2,5 mm2 400 V/6 kV/3 250V/400V/24 A/2,5 mm2 250V/400 V/4 kV/3 250V/400V/24 A/2,5 mm2 250V/400 V/4 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 0,5...4 1,5...4 0,5...4 0,25...4 0,25...4 0,13...4 24 A3 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103410 25 Block of each 103060 + 103120 103420 20 Block of three 103060 Type Cat. No. Qty. 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103090 50 (NT-Connection coded blue) WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 WHP WDL 2.5/S 106798 20 TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 SSch 10 x 3 Cu 034890 SSch 10 x 3 Ms025980 1m 1m 2 3 4 10 20 ZB 35 K 050268 50 WNT 10 WNT 16 N WNT 70 N 101098 101900 951221 50 50 10 WEW 35 / 2 106120 50 DEK 6 DEK 6 046866 046876 500 500 Type Cat. No. Qty. 20 TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 WEW 35 / 2 DEK 6 DEK 6 2 3 4 10 20 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103130 50 Type Cat. No. Qty. WAP WDL 2.5/S 106770 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 106120 50 WEW 35 / 2 046866 046876 500 500 DEK 6 DEK 6 2 3 4 10 20 2 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103080 50 (NT-Connection coded blue) Type Cat. No. Qty. WAP WDL 2.5/S 106770 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 106120 50 WEW 35 / 2 046866 046876 500 500 DEK 6 DEK 6 2 3 4 10 20 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103070 50 (NT-Connection coded blue) Type Cat. No. Qty. WAP WDL 2.5/S 106770 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 106120 50 WEW 35 / 2 046866 046876 500 500 DEK 6 DEK 6 2 3 4 10 20 A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103110 50 Type Cat. No. Qty. WAP WDL 2.5/S 106770 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 106120 50 WEW 35 / 2 106120 50 046866 046876 500 500 DEK 6 DEK 6 046866 046876 500 500 2 3 4 10 20 2/19 Three-way terminal blocks with N-cross-connection WQV Terminals/accessories WDL 2.5/NT/L/PE WDL 2.5/L/L W Installation specifications for power systems up to 1000 V to VDE 0100 (IEC 364) require that the installed system be subjected to an insulation measurement test. Special specifications stipulate an insulation measurement for all outgoing conductors (L 1, L 2, L 3, N) without making any disconnections. The WDL three-way terminal block meets these requirements. Circuits can be connected on three levels across a width of only 6 mm in a clear and space-saving manner. Two independent terminals strips with disconnect elements and a cross-connection system of the N conductor are available: WDL 2.5... N cross-connection via the WQV 4 crossconnection system from the W series. The supply power is fed directly via a clamping yoke in the terminal. WDL 2.5/L/L Three-phase circuits can be implemented by combining three-way terminals (L 1, N, PE) and WDL 2.5/L/L two-way terminals (L 2, L 3). W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade 29 A/4 mm2 31 A/4 mm2 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 Rated data Rated voltage/rated current/rated cross-section Rated voltage/impulse voltage/pollution severity VDE 0611 Part 4 250V/400V/24 A/2,5/4** mm2 250V/400 V/4 kV/3 IEC 947-7-1 400 V/24 A/2,5/4** mm2 400 V/6 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,13...4 A 3/A 4** 24 29 (Center supply 40A) 24 31 Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection Q multipole A Continuous current rating of cross-connection WQV 4 multipoleA UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version for TS 35 / Wemid 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102980 50 (NT-Connection coded blue) Type End plate Cat. No. Qty. WAP WDL 2.5 106780 20 A 3/A 4** 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103030 50 Type Cat. No. Qty. WAP WDL 2.5 106780 20 Small partition for Q... TSch 1 031916 100 TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV 105196 105456 105466 105206 50 50 50 20 WAW 1 900450 1 WAW 1 900450 1 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 Marking tags Print DEK 6 046866 DEK Consecutive horizontal DEK 6 046876 DEK Consecutive vertical WS 8/5 164074 WS Blank WS 8/5 158008 WS WS DEK Printed For further accessories see section 3, further marking material see section 8 500 500 - - DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - Cross-connection (L, NT, N) 2 3 4 10 20 2 3 4 10 20 Cross-connection* Input (L, NT, N) 32 A WQV WQV WQV WQV 4/2 4/3 4/4 4/10 4/2 4/3 4/4 4/10 Notching tool for WQV End bracket * Cross-connection WQV 4 ** Connection 4/6 mm2 / A4 2/20 WDL 2.5/N WDL 2.5/L W WDL 2.5/N/L W WDL 2.5/N/L/PE W WDL 2.5/L/L/PE W W 32 A/4 mm2 32 A/4 mm2 31 A/4 mm2 31 A/4 mm2 31 A/4 mm2 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 IEC 947-7-1 400 V/24 A/2,5/4** mm2 400 V/6 kV/3 IEC 947-7-1 400 V/24 A/2,5/4** mm2 400 V/6 kV/3 IEC 947-7-1 400 V/24 A/2,5/4** mm2 400 V/6 kV/3 250V/400V/24 A/2,5/4** mm2 250V/400 V/4 kV/3 250V/400V/24 A/2,5/4** mm2 250V/400 V/4 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 0,5...4/6** 1,5...4/6** 0,5...4/6** 0,5...4/4** 0,5...4/4** 24 31 A 3/A 4** 24 32 24 32 24 31 A 3/A 4** 24 31 (Center supply 40A) 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103010 50 (NT-Connection coded blue) 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103040 50 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103000 50 (NT-Connection coded blue) 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102990 50 (NT-Connection coded blue) Type Cat. No. Qty. WAP WDL 2.5 106780 20 TSch 1 031916 100 Q Q Q Q Q 107150 107160 107170 107180 107420 A 3/A 4** 2 Type Cat. No. Qty. WAP WDL 2.5 106780 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV WAW 1 900450 1 WEW 35 / 2 106120 50 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 2 3 4 10 20 WQV WQV WQV WQV 4/2 4/3 4/4 4/10 A 3/A 4** Type Cat. No. Qty. WAP WDL 2.5 106780 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV WAW 1 900450 1 WEW 35 / 2 106120 50 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 2 3 4 10 20 4/2 4/3 4/4 4/10 Type Cat. No. Qty. WAP WDL 2.5 106780 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV WAW 1 900450 1 WEW 35 / 2 106120 50 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 2 3 4 10 20 4/2 4/3 4/4 4/10 A 3/A 4** 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 103020 50 Type Cat. No. Qty. WAP WDL 2.5 106780 20 TSch 1 031916 100 50 50 50 20 20 Q Q Q Q Q 107150 107160 107170 107180 107420 50 50 50 20 20 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV 105196 105456 105466 105206 50 50 50 20 WAW 1 900450 1 WAW 1 900450 1 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 2 3 4 10 20 4/2 4/3 4/4 4/10 2 3 4 10 20 4/2 4/3 4/4 4/10 2/21 Disconnect test terminal blocks WTR 2.5 WTR 2.5 D WTR 2.5 D WTR 2.5 with diode plug with StB with diode plug and 2.3 socket without disconnector Max. Technical Data Dimensions Width/length/height (mm) mit TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Wemid Blue Wemid Blue Wemid Wemid Orange PA WAP (Thickness 1,5 mm) Wemid Blue Wemid WTW WAP Wemid W 16 A/1,5 mm2 16 A/1,5 mm2 16 A/1,5 mm2 16 A/1,5 mm2 5/60/49 10 mm/M 2,5/3**/3,5 x 0,6 5/60/49 + 18 fur WSD 10 mm/M 2,5/3,5 x 0,6 5/60/49 + 18 fur WSD 10 mm/M 3/3,5 x 0,6 5/60/49 10 mm/M 2,5/3**/3,5 x 0,6 800 V/16* A/2,5 mm2 8 kV/3 500 V/16* A/2,5 mm2 6 kV/3 500 V/16* A/2,5 mm2 6 kV/3 800 V/16* A/2,5 mm2 8 kV/3 0,4...0,8/0,5...1,0** 1/2** 0,4...0,8 1 0,5...1,0 2 0,4...0,8/0,5...1,0** 1/2** 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 A3 A3 A3 A3 26 26 26 26 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. no StB 101110 2 StB 2.3** 101120 no StB 101118 2 StB 2.3** 101128 2 StB 2.0** 101300 101116 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. ) 101350 50 ( 101360 50 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. ) 101320 50 ( 101330 50 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 101290 100 with StB 2.3** 101280 100 with wire link with wire link Type End plate / partition W W W Qty. 100 100 100 100 100 100 Cat. No. Qty. Type 101370 50 Cat. No. Qty. Type 101340 50 Cat. No. Qty. with StB 2.0** 101310 Type 100 Cat. No. Qty. WAP 2.5-10 105000 WAP 2.5-10 BL 105008 50 50 WAP 2.5-10 105000 WAP 2.5-10 BL 105008 50 50 WAP 2.5-10 105000 WAP 2.5-10 BL 105008 50 50 WAP 2.5-10 105000 WAP 2.5-10 BL 105008 50 50 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 QL 2 QL 3 QL 4 QL 10 BS-M 2,5x4,5 PS 2.3 (o 2,3) PS 2.0 (o 2,0) WDS 2 021580 021590 021600 033800 106270 018040 029380 106990 100 100 50 20 100 20 20 20 QL 2 QL 3 QL 4 QL 10 BS-M 2,5x4,5 PS 2.3 (o 2,3) PS 2.0 (o 2,0) 021580 021590 021600 033800 106270 018040 029380 100 100 50 20 100 20 20 QL 2 QL 3 QL 4 QL 10 BS-M 2,5x4,5 PS 2.3 (o 2,3) PS 2.0 (o 2,0) 021580 021590 021600 033800 106270 018040 029380 100 100 50 20 100 20 20 QL 2 QL 3 QL 4 QL 10 BS-M 2,5x4,5 PS 2.3 (o 2,3) PS 2.0 (o 2,0) 021580 021590 021600 033800 106270 018040 029380 100 100 50 20 100 20 20 WQB B/24 157906 20 WQB B/24 157906 20 WQB B/24 157906 20 WQB B/24 157906 20 WAW 2 900451 - WAW 2 900451 - WAW 2 900451 - WAW 2 900451 - SDIK fur StB 902493 SDIK fur StB 902493 SDIK fur StB 902493 WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - Cross-connection QL 2-10 VQB PS Cross-connection plug (2-pole, o 2,3) Notching tool To notch the punch-out in the terminal moulding for cross-connections Screwdriver SDIK Diode plug (spare) Marking tags DEK DEK WS WS DEK WS ( ) With wire link Without special components Print Consecutive horizontal Consecutive vertical Blank Printed WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - For further accessories see section 3, further marking material see section 8 1) Ferrules with optimum diam. for terminals * Rated current is limited to 1 A when using the diode plug with soldered diode ** M3 thread for versions with socket (StB) with 5 mm pitch: Cat. No. 133310 2/22 WTR 2.5/ZZ WDTR 2.5 WDTR 2.5/WE W SAKC 4/35 WDL 2.5TR-DU-PE WDL 2.5TR-DU W W W W ** ** 14 A/1,5 mm2 10 A/1,5 mm2 10 A/1,5 mm2 29 A/4 mm2 31 A/4 mm2 5/60/49 7 mm/M 3/3,5 x 0,6 6,2/94/69 8 mm/M 3/3,5 x 0,6 6,2/81/69 8 mm/M 3/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6/90/48,7 8 mm/M 2,5/3**/3,5 x 0,6 6,5/49,5/42,5/59,5 12 mm/M 3/3,5 x 0,6 400 V/14* A/2,5 mm2 6 kV/3 400 V/13* A/2,5 mm2 4 kV/3 400 V/10* A/2,5 mm2 4 kV/3 250V/400V/24 A/2,5/4** mm2 250V/400 V/4 kV/3 400 V/24 A/2,5/4** mm2 400 V/6 kV/3 400 V/25 A/4 mm2 6 kV/3 0,5...0,6 2 0,5...0,6 2 0,5...0,6 2 0,4...0,7 1 0,4...0,7 1 0,5...1,0/0,5 StB 2/1 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4 0,5...4 1,5...4 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,13...4 20 40 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,5...6 1,5...4 0,5...4 0,5...4 A3 A3 A3 24 24 24 300 V/10 A/22...12 AWG*** 300 V/10 A/26...12 AWG*** W Cat. No. Qty. 300 V/10 A/22...12 AWG*** 300 V/10 A/26...12 AWG*** W Cat. No. Qty. 300 V/10 A/22...12 AWG*** 300 V/10 A/26...12 AWG*** W Cat. No. Qty. 2 StB 2.3** 103990 100 952807 25 952809 25 2 StB 2.3** 103998 100 952808 25 952810 25 Type Cat. No. Qty. WAP WTR2.5/ZZ 107460 WAP WTR2.5/ZZ 107468 20 20 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 PS 2.3 (o 2,3) 60 60 60 20 20 20 20 20 20 20 160886 160887 160888 160889 160890 160891 160892 160893 160894 018040 SDIK fur StB 902493 WSD WSD WSD WSD 105846 105856 105866 105876 25 25 25 25 047346 047356 164074 158008 - - - - 2.5 2.5 2.5 2.5 DEK 5 DEK 5 WS 8/5 WS 8/5 Type Cat. No. Qty. Type Cat. No. Qty. A3 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102981 50 Type Cat. No. Qty. WAP WDL 2.5 106780 VQB 1.5 / 50 BL 163328 VQB 1.5 / 50 RT 163329 VQB 1.5 / 50 SW 163512 PS 2.3 (o 2,3) 018040 5 5 5 20 SDIK fur StB 902493 WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 DEK 6.5 DEK 6.5 WS 12/6 WS 12/6 046816 046826 160990 144766 - - - - VQB 1.5 / 50 BL 163328 VQB 1.5 / 50 RT 163329 VQB 1.5 / 50 SW 163512 PS 2.3 (o 2,3) 018040 5 5 5 20 SDIK fur StB 902493 WSD WSD WSD WSD 2.5 2.5 2.5 2.5 105846 105856 105866 105876 25 25 25 25 DEK 6.5 DEK 6.5 WS 12/6 WS 12/6 046816 046826 160990 144766 - - - - Q Q Q Q Q 2 3 4 10 20 20 A3 10 10 300 V/15 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102982 50 300 V/-/22...12 AWG 300 V/25 A/22...10 AWG W Cat. No. Qty. KrG 035756 50 KrG 2StB 2,3 035766 50 Type Cat. No. Qty. WAP WDL 2.5 106780 50 50 50 20 20 Q Q Q Q Q 105196 105456 105466 105206 50 50 50 20 WQV WQV WQV WQV WAW 1 900450 1 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 4/2 4/3 4/4 4/10 A4 20 40 107150 107160 107170 107180 107420 WQV WQV WQV WQV 2 2 3 4 10 20 Cat. No. Qty. 017760 20 TW(1.5) TW(1.0) 013016 029710 20 20 QB 2 QB 3 QB 4 048270 048280 048290 100 50 50 Q 25 Blank 013400 20 PS 2.3 (o 2.3) 018040 20 DEK 6,5 DEK 6,5 046816 046826 - 20 107150 107160 107170 107180 107420 50 50 50 20 20 105196 105456 105466 105206 50 50 50 20 WAW 1 900450 1 DEK 6 DEK 6 WS 8/5 WS 8/5 046866 046876 164074 158008 500 500 - - 4/2 4/3 4/4 4/10 Type AP *** applied for 2/23 Disconnect test terminal blocks WDT 1.5/1 WDT 1.5/2 WDT 1.5/3 with space saving TOP-connection with space saving TOP-connection with space saving TOP-connection W W Max. Technical Data Dimensions Width/length/height (mm) mit TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Wemid Blue Wemid Blue Wemid Wemid Dark beige/yellow Wemid Beige/yellow PA Blue/hellblau PA Orange PA Test plug PS Marking tags DEK DEK WS WS DEK WS Print Consecutive horizontal Consecutive vertical Blank Printed for further technical Informationen see Page 2/25 for further technical Informationen see Page 2/25 6,5/112/67 10 mm/M 2,5/3,5 x 0,6 6,5/112/67 10 mm/M 2,5/3,5 x 0,6 6,5/112/67 10 mm/M 2,5/3,5 x 0,6 250 V/10 A/1,5 mm2 4 kV/3 250 V/10 A/1,5 mm2 4 kV/3 250 V/10 A/1,5 mm2 4 kV/3 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,5...2,5 1,5...2,5 0,5...1,5 0,5...1,5 0,5...1,5 0,13...2,5 0,5...2,5 1,5...2,5 0,5...1,5 0,5...1,5 0,5...1,5 0,13...2,5 0,5...2,5 1,5...2,5 0,5...1,5 0,5...1,5 0,5...1,5 0,13...2,5 A2 150 V/10 A/26...14 AWG 150 V/10 A/26...14 AWG W Cat. No. Qty. 101580 101586 Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 2/24 A2 150 V/10 A/26...14 AWG 150 V/10 A/26...14 AWG W Cat. No. Qty. 25 25 101590 101556 A2 150 V/10 A/26...14 AWG 150 V/10 A/26...14 AWG W Cat. No. Qty. 25 25 101600 101576 101616 25 25 25 Type PS 2.3 Cat. No. Qty. 018040 20 Type PS 2.3 Cat. No. Qty. 018040 20 Type PS 2.3 Cat. No. Qty. 018040 20 DEK 6.5 DEK 6.5 WS 8/5 WS 8/5 046816 046826 164074 158008 DEK 6.5 DEK 6.5 WS 8/5 WS 8/5 046816 046826 164074 158008 DEK 6.5 DEK 6.5 WS 8/5 WS 8/5 046816 046826 164074 158008 For further accessories see section 3, further marking material see section 8 1) W for further technical Informationen see Page 2/25 - - - - - - - - - - - - WDTR 2.5 WDTR 2.5/WE Dual disconnect test terminal blocks W series The compact WDTR 2.5 enables the disconnection of one and two pole signal wires. l space-saving construction, only 6.2 mm wide l quick and easy cross-connection thanks to clip-on external cross-connections l reduction in accessories due to dual shell construction l test point via plug socket l Top SD operable disconnector l identification of disconnection level using raised portion l continuous temperature of Wemid insulating material 120 C l flammability V0 according to UL 94 2 WDTR 2.5 and WDTR 2.5/WE dual disconnect test terminal blocks can be found on page 2/23. Switching examples WDT 1.5/... Disconnect test terminals W series The WDT 1.5 enables the disconnection of one and two pole signal wires. By simply operating the selection switch, insulation and current measurements can be performed. l quick and reliable conductor connection thanks to TOP connection with open terminal point l test point via plug socket l clear colour coding of conductor connection, test point and switch position l non-symmetrical shape enhances mounting rail orientation l high distortion stiffness thanks to dual shell enclosed terminal carrier WDT 1.5/... disconnect test terminal blocks can be found on page 2/23. WDT 1.5/1 WDT 1.5/2 WDT 1.5/3 with space-saving TOP connection with space-saving TOP connection with space-saving TOP connection 0 0 W W M A 1 W 0 W M A 2 1 W W M M 2 W 2/25 Testing - Made easy WTL 6/1/STB WTQ 6/1 WTD 6/1 Current transformer circuits must always have closed a secondary current circuit. The same applies to the exchange of information from measuring instruments or electricity meters and when carrying out reference measurements with external measuring instruments. can be solved with the lateral disconnect terminals WTL 6/1, the feed-through terminals WTD 6/1 and the cross-disconnect terminals WTQ 6/1, and with the help of the functionally designed accessories. Examples: simple current transformer circuits, transformer test sets, etc. Various easy and costeffective wiring solutions Slide linck that are easy to apply 1 cross-connection slider per terminal 2/26 Safe cross-connections Standard accessories 2 DEK-labels per connection point The New Generation of Current Transformer Terminals WTL 6/2 WTL 6/3/STB 2 All circuits found in practice can be realised with WTL6/2 terminals (only one basic version) and only a few accessory parts. The cross-connection sliders are designed to be safe from finger-contact. The installation of two additional cross-connections for the K-point distribution is possible. These are standard cross-connections, WQV 6/..., of the W-series that enable individual terminals to be skipped. Testing ponits that are protected against finger-touch to VBG 4 The WTL 6/3 terminal is the safe-handling version of the WTL 6/2 terminal. Due to the specially designed test sockets, either conventional test plugs or commercially available safety tests plugs can be used. Compact construction: Slide linck, crossconnection, cross-connection slider 2 cross-connections sliders and 2 cross-connections per terminal Optimised accessories for all circuit variants 2 DEK-labels per connection point 2/27 W WTL 6/1/STB W WTD 6/1 W WTQ 6/1 WTL 6/2 WTL 6/3/STB 2/28 Three-phase Current Transformer Circuit with WTL 6/3/STB 2 Three-phase Current Transformer Circuit with 12 WTL 6/3/STB Requirement 1. The K-point must be routed together from the transformers to the measurement terminal set, so that only 4 wires are required. 2. 3 ammeters or relays (network protection) must be switchable in series for each phase 3. The current flowing via the K-point must be able to be measured with control measurement devices during operation. 4. It must be possible to disconnect the ammeters individually, without operating the transformer open-circuit. All remaining measurement devices must remain in operation without any change. 5. It must be possible to daisychain control measurement devices and transducing sensors for each phase; these devices may be connected with the help of test plugs. Solution With 12 WTL 6/3/STB disconnect test terminal blocks, a three-phase current transformer circuit can be realised with 3 ammeters that are connected in series. L1 Residual Current Measurement Ammeter hard-wired => Cross-connection slider opened Control ammeter connected => Slide linck opened L2 Transformer Short-Circuit Cross-connection slider closed => Ammeter disconnected L-3 Control Measurement by External Ammeter Control ammeter connected => Slide linck opened 3 cross-connection sliders closed => 3 ammeter disconnected 2/29 Disconnect test terminal blocks WTL 6/1/STB WTD 6/1 W W Current transformers must always have a closed, secondary circuit, even when exchanging measuring instruments or electricity meters and when carrying out reference measurements with external measuring instruments. Various easy and clear wiring solutions can be found using lateral disconnect terminals WTL 6/1, feed-through terminals WTD 6/1 and cross-disconnect terminals WTQ 6/1. Examples: Simple current transformer circuits Measurement transformer test sets. With one basic version, the WTL 6/2 can fulfill all circuit tasks occurring in practice as a lateral disconnect terminal. The shortcircuit slides are of shock-proof design. Two short-circuit slides can be installed. The WTL 6/3 is identical in function with the WTL 6/2 and is suitable for safety plug use due to its test socket StB 19.1 which is safe from finger-touch. Coloured sockets can be obtained for WTL 6/3. Meter test set with WTL 6/1 Combination of lateral disconnect terminal and feed-through terminal (example) Max. Technical Data Dimensions Width/length/height (mm) mit TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2...5 -pole A Continuous current rating of cross-connection 6...10 -pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type With Socket Wemid Without Socket Wemid End plate / partition Thickness 1,5 mm 57 A/10 mm2 57 A/10 mm2 8/65/48,2 12 mm/M 3,5/3*/4,0 x 0,8 8/65/48,2 12 mm/M 3,5/3*/4,0 x 0,8 500 V**/41 A/6 mm2 6 kV/3 400 V/41 A/6 mm2 6 kV/3 0,8...1,6/0,4...0,8* 3 0,8...1,6/0,4...0,8* 3 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 (QL 2...5) 47 (QL 6...10) 36 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 (QL 2...5) 47 (QL 6...10) 36 A5 A5 600 V/45 A / 20...8 AWG 300 V/45 A / 20...8 AWG W Cat. No. Qty. 101690 50 101670 50 Type Cat. No. Qty. WAP WTL 106830 20 WTW WTL 106840 20 600 V/45 A /20...8 AWG 300 V/45 A /20...8 AWG W Cat. No. Qty. Type WAP WTL WTW WTL 101710 50 Cat. No. Qty. 106830 20 106840 20 TSch 2 035366 100 TSch 2 035366 100 QL 2 QL 3 QL 4 QL 10 BS M 3x20 Cu VH 12 QVS 2 QVSK 2 QVS 3 QVS 4 BS 25 blank VH 19 019430 019440 019450 033830 037710 024900 030730 167036 032930 030740 033470 031800 50 50 50 20 100 100 20 20 20 20 100 100 QL 2 QL 3 QL 4 QL 10 BS M 3x20 Cu VH 12 QVS 2 QVSK 2 QVS 3 QVS 4 BS 25 blank VH 19 019430 019440 019450 033830 037710 024900 030730 167036 032930 030740 033470 031800 50 50 50 20 100 100 20 20 20 20 100 100 StB StB StB StB StB StB StB 026720 027120 027130 038900 038890 038910 016990 50 50 50 50 50 50 50 SSP 3 053176 100 PS 4 029960 20 PS 4 029960 20 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - Small partition Cross-connections 2-pole 3-pole 4-pole 10-pole QL 2 QL 3 QL 4 QVS WQV WKS VH 12 WKB VH 19 QVS K2 Socket Socket Type StB 25 accepts test plug PS 4 in Type WTL 6/1 disconnect terminals or Type QS cross-connection plugs. The Type StB 35 is used for simultaneous testing with inserted cross-connection slides (QVS). 25 25 25 35 35 35 14 GE GN VI GE GN VI Disconnect lock Prevents undesired opening of the disconnector Test plug Marking tags DEK DEK WS WS DEK WS Print Consecutive horizontal Consecutive vertical Blank Printed * Disconnect element 2/30 ** 400 V as disconnect terminal block WTQ 6/1 WTL 6/2 WTL 6/3/STB W W W 57 A/10 mm2 57 A/10 mm2 57 A/10 mm2 8/65/48,2 12 mm/M 3,5/3*/4,0 x 0,8 8/87/61,8 -/M 3,5/3*/4,0 x 0,8 8/87/61,8 -/M 3,5/3*/4,0 x 0,8 400 V/41 A/6 mm2 6 kV/3 400 V/41 A/6 mm2 6 kV/3 400 V/41 A/6 mm2 6 kV/3 0,8...1,6/0,4...0,8* 3 0,8...1,6/0,4...0,8* 3 0,8...1,6/0,4...0,8* 3 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 (QL 2...5) 47 (QL 6...10) 36 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 63 63 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 63 63 A5 600 V/45 A/20...8 AWG 300 V/45 A / 20...8 AWG W Cat. No. Qty. 101810 50 101790 50 Type Cat. No. Qty. WAP WTL 106830 20 WTW WTL 106840 20 TSch 2 035366 100 QL 2 019430 QL 3 019440 QL 4 019450 QL 10 033830 BS M 3x20 Cu 037710 VH 12 024900 WKB 1/2 160428 WKB 1/3 160430 WKB 1/4 160432 WKB 1/10 160433 50 50 50 20 100 100 50 50 50 20 StB 14 016990 A5 600 V/45 A/20...8 AWG 300 V/45 A / 20...8 AWG W Cat. No. Qty. 101770 50 Type Cat. No. Qty. 2 A5 600 V/45 A/20...8 AWG - W Cat. No. Qty. 101860 50 101880 50 Type Cat. No. Qty. WKS 1/2 WKS 1/3 WKS 1/4 160427 160429 160431 50 50 50 WKS 1/2 WKS 1/3 WKS 1/4 160427 160429 160431 50 50 50 WQV WQV WQV WQV 105236 105476 105486 105226 50 50 50 20 WQV WQV WQV WQV 105236 105476 105486 105226 50 50 50 20 21.6/IH/VI 107103 21.6/IH/GN 107102 21.6/IH/GE 107101 21.6/IH/BE 107100 50 50 50 50 6/2 6/3 6/4 6/10 50 StB StB StB StB 6/2 6/3 6/4 6/10 Safety plug supplier: Multi-Contact Deutschland GmbH, Postf. 1606, 79551 Weil a. Rhein SSP 3 053176 100 PS 4 029960 20 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - SSP WTL 6/2 160420 100 PS 4 029960 20 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - SSP WTL 6/2 160420 100 PS 4 029960 20 DEK 8 DEK 8 WS 12/6,5 WS 12/6,5 127696 128966 160992 156895 - - - - * Disconnect element 2/31 Fuse terminal blocks WSI 6 WSI 6 LD WSI 6 2 LD WSI 6/21) for metric fuses with LED indicator for metric fuses for DC or AC voltage (see note in first column of page 2/32) with 2 LED's for metric fuses for DC voltage (see note in first column of page 2/32) for inch fuses Note: With blown fuse the follow on circuit is still under current. Disconnect lever to open circuit Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Reihenklemmenunterteil Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Wemid Wemid Partition/End plate WTW Thickness 1,5 mm W W Max. Technical Data WAP Thickness 1,5 mm W W 6,3 A/- 6,3 A/- 6,3 A/- 10 A/- 8/60/60 12 mm/M 3,5/4,0 x 0,8 8/60/70 12 mm/M 3,5/4,0 x 0,8 8/60/70 12 mm/M 3,5/4,0 x 0,8 12/60/67 12 mm/M 3,5/4,0 x 0,8 500 V/6,3 A2)/6 mm2 6 kV/3 500 V/6,3 A2)/6 mm2 6 kV/3 500 V/6,3 A2)/6 mm2 6 kV/3 500 V/6,3 A2)/6 mm2 6 kV/3 0,8...1,6 3 0,8...1,6 3 0,8...1,6 3 0,8...1,6 3 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 A5 A5 A5 A5 26 26 26 26 300 V/10 A/20...8 AWG 300 V/10 A/20...8 AWG W Cat. No. Qty. 101100 50 300 V/10 A/20...8 AWG 24 V/10 A/20...8 AWG W Cat. No. Qty. 24 V- 101270 50 48 V- 805575 50 60 V- 813395 50 600 V/16 A/20...8 AWG 600 V/16 A/20...8 AWG W Cat. No. Qty. 101400 25 50 Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 300 V/10 A/20...8 AWG 300 V/10 A/20...8 AWG W Cat. No. Qty. 12 V-/24 V~ 101130 50 20-30 V-/40-60 V~ 101220 50 40-60 V-/80-120 V~ 101230 50 115 V-/230 V~ 101240 50 Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 Dis. term. w/contact sleeve102820 Cross-connection QL 2-10 BS PS Notching tool for QL WAW 2 G fuse cartridges 5x25 mm with indicator3) to DIN 41 576 Rated current (A): 0,2 med.blow Rated voltage 250 V AC 0,5 med.blow 0,8 med.blow 1 med.blow 10 med.blow 2 rapid blow 4 rapid blow 6,3 rapid blow G fuse cartridges 5x20 mm3) to DIN 41660 IEC 127 type 1 Rated current (A): Rated voltage 250 V AC 0.20 rapid blow Switching capacity 1500 A 0.25 rapid blow (at 250 V, 50 Hz, cos = 0.7) 0.50rapid blow 1.0 rapid blow 1.6 rapid blow 2.0 rapid blow 2.5 rapid blow G fuse cartridges 5x30 mm 3.15 rapid blow (500 V AC/0.032...6.3 A), 4.0 rapid blow Available from Wickmann-Werke GmbH, 5.0 rapid blow Annenstr. 113, 58453 Witten, Tel. +2302/6620 6.3 rapid blow Marking tags Print DEK Consecutive horizontal DEK Consecutive vertical WS Blank WS DEK Printed WS DEK DEK WS 12/6,5 WS 12/6,5 019430 019440 019450 033830 105210 018040 900451 50 50 50 20 100 20 - 10 10 10 10 10 10 10 10 054690 051030 064640 026580 019310 043040 043050 043060 043070 043080 043090 043100 043110 043120 043130 043140 10 10 10 10 10 10 10 10 10 10 10 047346 047356 160992 156895 - - - - 019430 019440 019450 033830 105210 018040 900451 50 50 50 20 100 20 - 054690 051030 064640 026580 019310 019270 019280 019290 DEK DEK WS 12/6,5 WS 12/6,5 019430 019440 019450 033830 105210 018040 900451 50 50 50 20 100 20 - 10 10 10 10 10 054690 051030 064640 026580 019310 019270 019280 019290 10 10 10 043040 043050 043060 043070 043080 043090 043100 043110 043120 043130 043140 10 10 10 10 10 10 10 10 10 10 10 047346 047356 160992 156895 - - - - DEK DEK WS 12/6,5 WS 12/6,5 047070 047080 047090 047100 105210 018040 900451 50 50 50 20 100 20 - 10 10 10 10 10 Fuse cartridges 1/4 "x 1 1/4 "(6.3 x 32) Rated voltage 440 V E2A 029450 E3A 029570 10 10 019270 019280 019290 10 10 10 E5A E7A E 10 A 10 10 10 043040 043050 043060 043070 043080 043090 043100 043110 043120 043130 043140 10 10 10 10 10 10 10 10 10 10 10 G fuses 1/4"x1"(6.3 x 25) (250 V 0.05...6.3 A) Available from Messrs ELU Inselstrae 18 D-44143 Dortmund +231 - 528138 047346 047356 160992 156895 - - - - DEK DEK WS 12/6,5 WS 12/6,5 029460 029580 029390 047346 047356 160992 156895 For further accessories see section 3, further marking material see section 8 1) 2/32 Rated thermal current to VDE 0611 = 6.3 A when used as a short-circuit fuse up to 15 A.. 2) 3) Maximum power loss 1.6 W Note power loss of fuse cartridge up to 1.6 Watt - - - - WSI 6/21) with LED for V AC/V DC inch fuses (see note in first column of page 2/32) WSI 6/21) with 2 LEDs for V DC inch fuses only (see note in first column of page 2/32) SAKS 4/35 SAKS 2/35 SAKS 5/35 for D 01-fuse E 14 for D-fuse E 16 for D 02-fuse E 18 W W W W W 10 A/- 10 A/- 12/60/79 12 mm/M 3,5/4,0 x 0,8 12/60/79 12 mm/M 3,5/4,0 x 0,8 24/75/66 14 mm/M 4/5,5 x 1 28/80/75 12 mm/M 4/5,5 x 1 28/80/66 13 mm/M 4/5,5 x 1 500 V/6,3 A2) /6 mm2 6 kV/3 500 V/6,3 A2) /6 mm2 6 kV/3 400 V~4) /16 A/10 mm2 6 kV/3 500 V~/10 (25) A5) /10 mm2 6 kV/3 400 V~4 ) /63 A/16 mm2 6 kV/3 0,8...1,6 3 0,8...1,6 3 1,2...2,4 4 1,2...2,4 4 1,2...2,4 4 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 0,5...10 1,5...10 0,5...10 0,5...6 0,5...6 0,5...10 0,5...16 1,5...10 0,5...10 0,5...10 0,5...16 0,5...10 0,5...10 0,5...10 1,5...16 1,5...16 1,5...16 1,5...16 A5 A5 26 26 600 V/16 A/20...8 AWG 10-220 V/16 A/20...8 AWG W Cat. No. Qty. 14 V-/10-28 V~ 101410 25 15-30 V-/30-60 V~101420 25 40-60 V-/80-120 V~101430 25 110 V-/220 V~ 101440 25 Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 600 V/16 A/20...8 AWG 24 V/16 A/20...8 AWG W Cat. No. Qty. 24 V- 101450 25 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 QL 2 QL 3 QL 4 QL 10 BS-M 3x5 PS 2.3 WAW 2 047070 047080 047090 047100 105210 018040 900451 Fuse cartridges 1/4"x 1 1/4"(6.3 x 32) Rated voltage 440 V E2A 029450 E3A 029570 E5A E7A E 10 A 029460 029580 029390 50 50 50 20 100 20 - Type Cat. No. Qty. WAP 105000 50 WTW 2.5-10 105010 20 Install partition after last WSI 6 047070 047080 047090 047100 105210 018040 900451 50 50 50 20 100 20 10 10 Fuse cartridges 1/4"x 1 1/4"(6.3 x 32) Rated voltage 440 V E2A 029450 E3A 029570 10 10 10 10 10 E5A E7A E 10 A 10 10 10 029460 029580 029390 0,33...16 (QL 2...5) 47 (QL 6...10) 36 B6 047346 047356 160992 156895 - - - - DEK DEK WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 - - - - B6 1,5...16 (QL 2...5) 47 (QL 6...10) 36 B7 600 V/30 A/22...8 AWG W Cat. No. Qty. 600 V/25 A/22...8 AWG W Cat. No. Qty. 600 V/63 A/14...6 AWG W Cat. No. Qty. Wemid beige KrG 050180 Neozed D 01 Wemid beige KrG 136870 Diazed E 16 Wemid beige KrG 050210 Neozed D 02 Type QL 2 QL 3 QL 4 QL 10 BS M 4x9 SS M 4 20 Cat. No. Qty. 032800 032810 032820 033900 010330 013640 20 20 20 20 100 100 Fuse cartridges D 01 Rated voltage 380 V E 14/2 013740 E 14/4 013750 E 14/6 032830 10 10 10 E 14/10 E 14/16 032840 032850 10 10 Gauge rings P 14/2 P 14/4 P 14/6 P 14/10 013800 013810 032860 032870 50 50 50 50 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 4) 5) Type QL 2 QL 3 QL 4 QL 10 BS M 4x9 SS M 4 20 Cat. No. Qty. 020780 020790 020800 033890 010330 013640 20 20 20 20 100 100 Fuse cartridges D Rated voltage 380 V E 10 A 020850 E 16 A 020860 E 20 A 020870 25 25 25 E 25 A 25 020880 Gauge rings Screw cap (spare) SK 033941 DEK DEK WS 12/6,5 WS 12/6,5 0,33...16 (QL 2...5) 47 (QL 6...10) 36 2 047346 047356 160992 156895 20 - - P 16/10 P 16/16 P 16/20 QL 2 QL 3 QL 4 QL 10 BS M 4x9 SS M 4 Cat. No. Qty. 020780 020790 020800 033890 010330 013640 20 20 20 20 100 100 Fuse cartridges D 02 Rated voltage 500 V E 18/20 036130 E 18/25 036140 E 18/35 036150 10 10 10 E 18/50 E 18/63 036160 036170 10 10 P 18/20 036180 P 18/25 036190 P 18/35 036200 P 18/50 036210 Screw cap (spare) SK 035931 50 50 50 50 Gauge rings 020890 020900 020910 100 100 100 Screw cap (spare) SK 028411 20 DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 Type 20 047346 047356 160992 156895 - - DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 047346 047356 160992 156895 20 - - Also for 440 V~ with Neozed-marine fuse Current for overload up to 10 A, for short-current up to 25 A 2/33 Terminal blocks for temperature measuring circuits WDU 2.5/TC W Weidmuller thermocouple terminals are specially designed to transmit very small voltages in temperature measuring circuits. Special busbars ensure that no false signals are transmitted in the terminal when temperature differences between the positive and negative paths exist. This high measuring precision is required, for example, in aircraft engine performance test rigs, complicated chemical processes, controllers, etc. * Busbar material corresponds to thermal and compensating conductors * Clear thermocouple marking * 2-pole blocks per thermocouple * Stacking width: 10 mm Configuration of a temperature measuring circuit 1 Thermocouple (sensor) 2 Thermocouple terminals 3 Compensating conductor Max. Technical Data Dimensions Width/length/height (mm) mit TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2, Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version for Thermocouples Type K NiCr - Ni to IEC 584 Type T Cu - CuNi (DIN 43710) Type J Fe - CuNi Type S u. R PT 10% - Pt Rh/PT 13% - Pt Rh Type B Pt 30% Rh - Pt 6% Rh Type E NiCr - CuNi 10/60/50,5 10 mm/M 2,5/3,5 x 0,6 -/-/2,5 mm2 0,4...0,8 1 0,5...2,5 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4 300 V/20 A/22...12 AWG - W A2 Cat. No. 102410 102420 102430 102440 103370 103330 Qty. 50 50 50 50 50 50 Qty. 50 4 Reference junction 5 Supply conductors (to and from) 6 Measuring instrument he thermocouple terminals shown in this measuring circuit thermoelectrically transmit thermoelectric voltage from the thermocouple to the reference junction and the indicator unit via the compensating conductor. Thermocouple terminals are required for constructing a temperature circuit. End plate / partition WAP (Thickness 1,5 mm) Wemid Type WAP 2.5-10 Cat. No. 105000 WTW (Thickness 1,5 mm) Wemid WTW 2.5-10 105010 20 047346 047356 160986 144746 - - - - Technical data Thermocouples to IEC 584 (DIN 43710) Busbar Cromel-Alumel CopperConstantan IronConstantan E-Copper/ A-Copper S-Copper/ E-Copper CromelConstantan 2/34 Marking tags Print DEK 5 DEK Consecutive horizontal DEK 5 DEK Consecutive vertical WS 12/5 WS Blank WS 12/5 WS DEK Printed WS For further accessories see section 3, further marking material see section 8 Feed-through terminals with WSA plug adaptor WDU 4 SA Feed-through terminals WPO 4 for retrofitting electronic components W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2, Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type End plate WAP (Thickness 1,5 mm) W 6/60/47 10 mm/M 3/3,5 x 0,6 400 V/34 A/4 mm2 6 kV/3 0,5...1,0 2 0,5...6 1,5...6 0,5...4 0,5...4 0,5...4 0,13...6 A4 300 V/25 A/22...12 AWG 300 V/-/22...12 AWG W Cat. No. Qty. 102110 100 blue 102118 100 Type WAP 2.5-10 WAP 2.5-10 Cat. No. Qty. 105000 50 105008 50 WTW 2.5-10 WTW 2.5-10 105010 105018 20 20 LS 2.8 105640 50 WSA 21) WSA 22) 0502363) 0529763) 20 20 0529653) 0529564) 1333963) 1333863) 1334053) 1333764) 20 20 20 20 20 20 053166 040536 040556 040576 040596 040616 20 20 20 20 20 20 019850 019900 200 - 046866 046876 160990 144766 5 - - - - Partition 32 A/4 mm2 Wire diameter electrical component UL / CSA rated data Voltage / current / conductor size 0,8...1,0 mm mm UL CSA Type Wemid Ordering data Barrier Thickness 2,5 mm 6/60/47 9 mm/M 3/3,5 x 0,6 2 250 V/32 A/4 mm2 4 kV/3 0.5...1.0 2 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,13...4 A3 300 V/10 A / 26...12 AWG Cat. No. Qty. 103600 50 Type ZR Cat. No. Qty. 107110 20 SSch 7.3x1.2 107120 Busbar WTW (Thickness 1,5 mm) Cross-connection WQV 1m Screen lug LS 2.8 Plug adaptor WSA 2 380 V~/10 A/1,5 mm2 Version with crimp connection Green Version with screw connection TOP-system Green WSA WSA WSA WSA WSA WSA 22) 22) 2 TOP1) 2 TOP2) 2 TOP2) 2 TOP2) Covers 3 4 5 8 10 12 AH AH AH AH AH AH 2/3 2/4 2/5 2/8 2/10 2/12 Crimp contact 0.5-1.5 mm2 Individual C 1 E/L* Continuous strip on reel C 1 R/L Marking tags Print DEK Consecutive horizontal DEK 6 DEK Consecutive vertical DEK 6 WS Blank WS 12/6 WS DEK Printed WS 12/6 WS See Section 5 for mounting rails, end brackets, additional marking materia * Crimping tool Type CZ 22E 056040 Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2, Gauge pin to 947-1 Size 1) 2) With hook Without hook 3) 4) With dovetail Without dovetail 5) 6) Without pin With pin WPO 4 with fitted varistor Weidmuller varistor terminals have been designed for retrofitting electronic components, e.g. varistors, diodes, gas discharge tubes, etc. These electronic terminals no longer have to be configured prior installation to subsequently be delivered with soldered components which can no longer be distinguished. The significant advantages of this new design are Cost saving * Components can be changed quickly on site. * Service is limited to visual inspection Overvoltages in a three-phase supply discharged to earth via WPE 4 with the aid of varistors and a gas discharge tube. Clarity: * Components are easy to distinguish. Flexibility: * Components can immediately be adapted to changed conditions Note: * Never change electronic components in energised systems Marking tags DEK DEK WS WS DEK 7) 8) WS Print Consecutive horizontal Consecutive vertical Blank Printed DEK 6 DEK 6 WS 12/6 WS 12/6 046866 047356 160990 144766 - - With spring Without spring 2/35 Feed-through terminal blocks for BLA/BLZ connectors WDU 1.5/BLA WDU 1.5/LD/BLA WDU 1.5/R/BLA with red LED Negative return conductor in blue W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type Standard blue with red LED with red LED with red LED with red LED Fixed-pole blocks on request End plate / fixing bracket** WAP (Thickness 2,5 mm) WBB orange (Thickness 5 mm) Cross-connection WQV Notching tool WAW 1 fur WQV W WDK 2.5/BLA R 5.08 250 V W W 5,08/45,4/57,5*/45,0/55,5* 10 mm/M 2,5/3,5 x 0,6 5,08/45,4/57,5*/45,0/55,5* 10 mm/M 2,5/3,5 x 0,6 5,08/45,4/57,5*/45,0/55,5* 10 mm/M 2,5/3,5 x 0,6 5.08/58/53/63,5* 12 mm/M 2,5/3,5 x 0,6 250 V/10 (2x8) A/1,5 mm2 4 kV/3 - V/10 (2x8) A/1,5 mm2 - V/- A/1,5 mm2 250 V/17,52) A/2,5 mm2 4 kV/3 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,5...4/2,5 1,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,51) 0,13...4 35 35 0,5...4/2,5 1,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,51) 0,13...4 35 35 0,5...4/2,5 1,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,51) 0,13...4 35 35 0,5...4/2,5 1,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,5 0,5...2,5/1,51) 0,13...4 - - A 3/A 1 300 V/20 (2x10) A/26...16 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 157726 100 A 3/A 1 300 V/20 (2x10) A/26...16 AWG 12...110 V/10 A/26...12 AWG W Cat. No. Qty. A 3/A 1 300 V/20 (2x10) A/26...16 AWG -/-/26...12 AWG W Cat. No. Qty. 157731 12 V- 24 V- 48 V- 110 V- 157727 157728 157729 157730 100 Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 Type With pin Without pin With pin Without pin Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 Type With pin Without pin With pin Without pin Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 WQV WQV WQV WQV 105366 106376 105386 105446 50 50 50 20 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 900450 - WAW 1 900450 - WAW 1 900450 - ML-SSch 106320 3 ML-SSch 106320 3 WAW 1 Negative conductor-busbar 0,5 x 4 x 120 mm 2.5/2 2.5/3 2.5/4 2.5/10 Cat. No. Qty. 103810 100 100 100 100 100 Type With pin Without pin With pin Without pin 2.5/2 2.5/3 2.5/4 2.5/10 - - W A 3/A 1 2.5/2 2.5/3 2.5/4 2.5/10 Type Cat. No. Qty. With pin 107010 20 Without pin 107000 20 With pin 107276 10 Without pin 107266 10 Cross-connection comb, insul. WQB A/2 157895 50 WQB A/3 157896 50 WQB A/4 157897 50 WQB A/10 157899 20 Cover for unassigned pins WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 SLA-KO 132356 100 SLA-KO 132356 100 SLA-KO 132356 100 SLA-KO 132356 100 BLA BLA BLA BLA BLA BLA 4 6 8 4B 6B 8B 128196 128216 128236 135626 135646 135666 100 50 50 100 50 50 BLA BLA BLA BLA BLA BLA 4 6 8 4B 6B 8B 128196 128216 128236 135626 135646 135666 100 50 50 100 50 50 BLA BLA BLA BLA BLA BLA 4 6 8 4B 6B 8B 128196 128216 128236 135626 135646 135666 100 50 50 100 50 50 BLA BLA BLA BLA BLA BLA 4 6 8 4B 6B 8B 128196 128216 128236 135626 135646 135666 100 50 50 100 50 50 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - Coding element Socket strips BLA 2...24 No. poles BLA 2...24 B 4 BLZ 2...24 B 6 BLZ 2...24 with lateral 8 dovetail 4 guide 6 8 For further Informations see Section Connectors, Page 5/92 Marking tags Print DEK Consecutive horizontal DEK Consecutive vertical WS Blank WS DEK Printed WS For further accessories see section 3, further marking material see section 8 1) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 2/36 * With BLA ** Set for screwing the connector to the terminal strip *** 20 C ambient temperature WDU 1.5/BLZ 5.08 WDU 1.5/BLZ/ LD/5.08 WDU 1.5/BLZ/ R 5.08 WDK 2.5/BLZ R 5.08 WDU 2.5/BLZ R 7.62 WDK 2.5/BLZ R 7.62 with LED Red Negative return conductor in blue 250 V 400 V 400 V W W W W W W 5.08/45,4/57,5*/45,0/55,5 10 mm/M 2,5/3,5 x 0,6 5.08/45,4/57,5*/45,0/55,5* 10 mm/M 2,5/3,5 x 0,6 5.08/45,4/57,5*/45,0/55,5* 10 mm/M 2,5/3,5 x 0,6 5.08/58/53/63,5* 12 mm/M 2,5/3,5 x 0,6 7.62/45,4/57,5*/45,0/55,5 10 mm/M 2,5/3,5 x 0,6 7.62/58/53/63,5* 12 mm/M 2,5/3,5 x 0,6 250 V/10 (2x8) A/1,5 mm2 4 kV/3 - V/10 (2x8) A/1,5 mm2 - V/- A/1,5 mm2 250 V/182) A/2,5 mm2 4 kV/3 400 V/24(2x12)2) (2x8) A/1,5 mm2 6 kV/3 400 V/202) A/2,5 mm2 6 kV/3 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,51) 0,13...4 35 35 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,51) 0,13...4 35 35 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,51) 0,13...4 35 35 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,51) 0,13...4 - - 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,13...4 35 35 0,5...4/4 1,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,5...2,5/2,5 0,13...4 - - A 3/A 3 300 V/20 (2 x 10) A/26...16 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 157734 100 159690 100 A 3/A 3 300 V/20 (2 x 10) A/26...16 AWG 12...110 V/10 A/26...12 AWG W Cat. No. Qty. A 3/A 3 300 V/20 (2 x 10) A/26...16 AWG -/-/26...12 AWG W Cat. No. Qty. 157739 12 V- 24 V- 48 V- 110 V- 157735 157736 157737 157738 Type With pin Without pin With pin Without pin Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 Type With pin Without pin With pin Without pin Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 WQV WQV WQV WQV 105366 106376 105386 105446 50 50 50 20 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 900450 - WAW 1 900450 - WAW 1 900450 - ML-SSch 106320 3 ML-SSch 106320 3 WAW 1 300 V/10 A/26...12 AWG - W Cat. No. Qty. 103440 100 - - W Type Cat. No. Qty. With pin 107010 20 Without pin 107000 20 With pin 107276 10 Without pin 107266 10 Cross-connection comb, insul. WQB A/2 157895 50 WQB A/3 157896 50 WQB A/4 157897 50 WQB A/10 157899 20 Type With pin Without pin With pin Without pin Cat. No. Qty. 157732 50 157733 50 107360 10 107350 10 Type With pin Without pin With pin Without pin Cat. No. Qty. 107010 20 107000 20 107296 10 107286 10 Cat. No. Qty. 103890 100 - - W A 3/A 3 Cat. No. Qty. 103850 100 100 Cat. No. Qty. 157732 50 157733 50 106826 10 106816 10 2.5/2 2.5/3 2.5/4 2.5/10 A 3/A 3 100 100 100 100 Type With pin Without pin With pin Without pin 2.5/2 2.5/3 2.5/4 2.5/10 A 3/A 3 2 2.5/2 2.5/3 2.5/4 2.5/10 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ BLZ BLZ BLZ BLZ BLZ 4 6 8 4B 6B 8B 152666 152686 152706 152896 152916 152936 100 50 50 100 50 50 BLZ BLZ BLZ BLZ BLZ BLZ 4 6 8 4B 6B 8B 152666 152686 152706 152896 152916 152936 100 50 50 100 50 50 BLZ BLZ BLZ BLZ BLZ BLZ 4 6 8 4B 6B 8B 152666 152686 152706 152896 152916 152936 100 50 50 100 50 50 BLZ BLZ BLZ BLZ BLZ BLZ 4 6 8 4B 6B 8B 152666 152686 152706 152896 152916 152936 100 50 50 100 50 50 BLZ BLZ BLZ BLZ BLZ BLZ 162307 162309 162311 162340 162342 162344 100 50 50 100 50 50 BLZ BLZ BLZ BLZ BLZ BLZ 162307 162309 162311 162340 162342 162344 100 50 50 100 50 50 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - 047346 047356 160992 156895 - - - - 047346 047356 160992 156895 - - - - 4 6 8 4B 6B 8B DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 4 6 8 4B 6B 8B DEK 5 DEK 5 WS 12/6,5 WS 12/6,5 * With BLZ 2) 20 C ambient temperature 2/37 Feed-through terminal blocks WDU 2.5 F WDU 2.5 FF W Max. Technical Data Dimensions Width/length/height (mm) mit TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89 / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic insul. collar mm2 Max. Clamping Range in mm2 Gauge pin to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid WTW WAP Wemid Wemid Wemid Blue Wemid End plate / partition WAP (Thickness 3 mm) Wemid WAP 2.5 (Thickne. 1,5 mm) blue Wemid WTW (Thickness 1,5 mm) Wemid Wemid Cross-connection WQV Screen lug LS 2.8 Notching tool for WQV Test adapter WTA WAW 1 TA 1 WDK 2.5 F W WDK 2.5 FV W W 12 A/- 12 A/- 12 A/- 12 A/- 5/60/47 10 mm/M 2,5/3,5 x 0,6 5/60/47 10 mm/- 5/69/63 10 mm/M 2,5/3,5 x 0,6 5/69/63 10 mm/M 2,5/3,5 x 0,6 500 V m. IH/12 (2x6) A / 2,5/1mm 2 6 kV/3 500 V m. IH/12 (2x6) A/1 mm2 6 kV/3 400 V m. IH/12 (2x6) A/2,5/1 mm2 6 kV/3 400 V m. IH/12 (2x6) A/2,5/1 mm2 6 kV/3 0,4...0,8 1 - 0,4...0,8 1 0,4...0,8 1 0,5...4 0,5...2,5 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 35 35 - 12 12 0,5...4/1 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 32 32 0,5...4/1 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,51) 0,13...4 32 32 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102180 100 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102190 100 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102160 100 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP WAP WTW (Ex) e 102168 100 Cat. No. Qty. 105910 20 105918 20 105880 20 WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB B/24 LS 2.8 WAW 1 105366 105376 105386 105446 157906 105640 900450 50 50 50 20 20 50 - WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 LS 2.8 WAW 1 105640 900450 50 - WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 LS 2.8 WAW 1 105366 105376 105386 105446 157900 105640 900450 TA 1 053586 20 TA 1 053586 20 TA 1 IH 2.8 038606 100 IH 2.8 038606 100 ADP 2 HP 2 048530 048566 1m 20 ADP 2 HP 2 048530 048566 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 0,5...1 - - A3 - A3 A3 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102240 100 Type WAP Cat. No. Qty. 105910 20 WTW (Ex) e 105880 20 50 50 50 20 20 50 - WQV 2.5/2 WQV 2.5/3 WQV 2.5/4 WQV 2.5/10 WQB A/24 LS 2.8 WAW 1 105366 105376 105386 105446 157900 105640 900450 50 50 50 20 20 50 - 053586 20 TA 1 053586 20 IH 2.8 038606 100 IH 2.8 038606 100 1m 20 ADP 3 HP 3 048540 048576 1m 20 ADP 3 HP 3 048540 048576 1m 20 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 DEK DEK WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 2.5/2 2.5/3 2.5/4 2.5/10 Strain relief Test plug / sockets / insulating sleeves PS 2.3 StB 8.5 Insulating sleeves Cover WAD with symbol WAD white for self-labeling Group marking WT 4 T5 WGB Tag carrier for S 10 markers Marking tags Print DEK Consecutive horizontal DEK 047346 DEK Consecutive vertical DEK 047356 WS Blank WS 12/5 160986 WS DEK Printed WS 12/5 144746 WS For further accessories see section 3, further marking material see section 8 1) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310 2/38 - - - - - - - - - - - - - - - - WDK 2.5 FF WDK 2.5 FFV WDK 2.5 T WDK 2.5 TT W W W WDU 2.5 T WDU 2.5 L WDU 2.5 LL W WTR 2.5 L WTR 2.5 LL W W 12 A/- 12 A/- 10 A/- 10 A/- 15 A/- 10 A/- 5/75/63 -/-/- 5/75/63 -/-/- 5/69/63/78 10 mm/M 2,5/3,5 x 0,6 5/60/47/70 10 mm/M 2,5/3,5 x 0,6 5/60/64/47 10 mm/M 2,5/3,5 x 0,6 5/60/64/47 10 mm/M 2,5/3,5 x 0,6 500 V m. IH/12 (2x6) A/1 mm2 6 kV/3 500 V m. IH/12 (2x6) A/1 mm2 6 kV/3 125 V/10 A/2,5 mm2 2,5 kV/3 125 V/10 A/2,5 mm2 2,5 kV/3 400 V/15 A/2,5/1,5 mm2 6 kV/3 400 V/14 A/1,5 mm2 6 kV/3 0,4...0,8 1 0,4...0,8 1 0,4...0,8 1 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,51) 0,13...4 32 32 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,51) 0,13...4 32 32 0,5...4/1,5 0,5/1,5...4/1,5 0,5...4/1,5 0,5...2,5 0,5...2,51) 0,13...4 32 32 - - 0,5...1 - - - - 0,5...1 - - 12 12 12 12 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102170 100 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 102250 100 - - W Cat. No. right pin 0.8x1.6 vt 102380 right pin 0.8x2.4 vt 102390 right+ left 0,8x2,4 vt157720 Type WAP Cat. No. Qty. 105910 20 WTW (Ex) e 105880 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 105366 105376 105386 105446 50 50 50 20 WQV WQV WQV WQV A3 A3 - - W Cat. No. Qty. Screw - Solder 102210 100 Solder - Solder 102220 100 - - W Cat. No. Qty. Screw - Solder 101380 100 Solder - Solder 101390 100 Cat. No. Qty. 105910 50 105918 50 105010 20 105018 20 Type WAP 2.5-10 Cat. No. Qty. 105000 50 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 Type WAP 2.5-10 WAP 2.5-10 WTW 2.5-10 WTW 2.5-10 Cat. No. Qty. 105000 50 105008 50 105010 20 105018 20 105366 105376 105386 105446 50 50 50 50 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 50 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 50 QL 2 QL 3 QL 4 QL 10 BS-M 2,5x4,5 021586 021590 021600 033800 106270 LS 2.8 WAW 1 105640 900450 50 - WTA 2 WTA 2/ZA WTA 2/10 ZE 1 163232 163233 163234 163215 50 50 5 50 PS 2.3 (o 2,3) 018040 StB 8.5 (o 2,3) 021570 20 50 WAD 5 WAD 5 white 105346 105606 50 50 Qty. 100 100 100 102178 100 Cat. No. Qty. 105910 20 105918 20 105880 20 WQV WQV WQV WQV 105366 105376 105386 105446 50 50 50 20 WQV WQV WQV WQV LS 2.8 WAW 1 105640 900450 50 - LS 2.8 WAW 1 105640 900450 50 - LS 2.8 WAW 1 105640 900450 50 - LS 2.8 WAW 1 105640 900450 50 - TA 1 053586 20 TA 1 053586 20 TA 1 WTA 5/1 053586 105126 20 25 WTA 5/1 105126 25 PS 2.3 (o 2,3) 018040 StB 8.5 (o 2,3) 021570 20 50 PS 2.3 (o 2,3) 018040 StB 8.5 (o 2,3) 021570 20 50 IH 2.8 ADP 3 HP 3 038606 048540 048576 100 1m 20 2.5/2 2.5/3 2.5/4 2.5/10 IH 2.8 ADP 3 HP 3 038606 048540 048576 2.5/2 2.5/3 2.5/4 2.5/10 A3 300 V/20 (2x10) A/26...16 AWG - W Cat. No. Qty. left pin 1x1 102200 100 right pin 1x1 102270 100 left pin 0.8x2.4 vt 102120 100 left pin 0.8x2.4 ho103690 100 Type WAP WAP WTW (Ex) e 2.5/2 2.5/3 2.5/4 2.5/10 A3 0,5...1,5 1,5 0,5...1,5 0,5...2,5 0,5...2,51) 0,13...4 26 26 2 2.5/2 2.5/3 2.5/4 2.5/10 2.5/2 2.5/3 2.5/4 2.5/10 100 100 50 20 100 100 1m 20 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 8/5 WS 8/5 047346 047356 164074 158008 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK 5 DEK 5 WS 12/5 WS 12/5 047346 047356 160986 144746 DEK DEK WS 12/5 WS 12/5 047346 047356 160986 144746 - - - - - - - - - - - - - - - - - - - - - - - 2/39 Feed-through terminals with tab connection AST 1 AST 4 W W Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Gauge pin to IEC 947-1/1988 Size Continuous current of terminal block for conductor size Continuous current of cross-connection 2-pole A Continuous current of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Slotted Wemid Unslotted Wemid End plate / Partition/Small partition (Thickness mm) Wemid PA AP AST 5 SAK 4 S/35 SAK 4 SS/35 W W 6,5/58/46 6,5/40/40 9 mm/M 2,5/3,5 x 0,6 6,5/58/46 12 mm/M 3/3,5 x 0,6 6,5/40/49,5 12 mm/M 3/3,5 x 0,6 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V/16 A/2,5/1,0 mm2 6 kV/3 0,4...0,7 1 0,5...1,0 2 0,5...1,0 2 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 A2 0,5...6 1,5...2,5 0,5...4 0,5...4 A4 0,5...6 1,5...2,5 0,5...4 0,5...4 A4 (QL 2...10) 36 (QL 2...10) 36 (QL 2...10) 36 (QL 2...10) 36 300 V/13 A/- 300 V/16 A/- W 300 V/13 A/22...12 AWG 300 V/16 A/24...12 AWG W Cat. No. Qty. 046040 100 047940 100 300 V/13 A/22...12 AWG 300 V/16 A/24...12 AWG W Cat. No. Qty. 066490 50 069970 50 300 V/13 A/22...12 AWG 300 V/16 A/24...12 AWG W Cat. No. SAK 4 S 063030 (screw-/tab-connection) SAK 4 SS 063040 SAK 4 SS 064690 (tab-/tab-connection) Cat. No. Qty. 069960 50 066480 50 Qty. 100 100 100 Type AP (1,5) TSch 1 Cat. No. Qty. 026640 20 031916 100 Type AP (1,5) TSch 1 Cat. No. Qty. 046049 20 031916 100 Type AP (1,5) TSch 1 Cat. No. Qty. 026640 20 031916 100 Type AP (1,5) TSch 1 Cat. No. Qty. 010510 20 031916 100 Q Q Q Q 033670 033680 033690 036880 Q Q Q Q 033670 033680 033690 036880 Q Q Q Q 033670 033680 033690 036880 QL QL QL QL 013060 013070 013080 033820 100 100 50 20 BS M 3x4,5 159321 100 IH 2.8 IH 6.3 038606 038626 100 100 FW 6.5 046816 - TSch Cross-connection 2-pole 3-pole 4-pole 10-pole 25-pole Q3 2 3 4 10 50 50 50 20 2 3 4 10 50 50 50 20 2 3 4 10 50 50 50 20 QL BS 2 3 4 10 Plug adaptor Only clips into PA version of AST 3 and AST 4 2-pole 3-pole 4-pole 5-pole 8-pole STA STA STA STA STA 2.5/2 2.5/3 2.5/4 2.5/5 2.5/8 016586 016596 019036 016606 016616 100 50 50 50 50 Test plug/Socket Plug test socket without using QL for TS 32 PS StB StB 14 016860 50 StB 14 016860 50 StB 14 016860 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 IH 6.3 038606 038626 100 100 FW 6.5 046816 - FW 6 046866 - FW 6.5 046816 - Insulation sleeve Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 1) With insulation sleeve 2) Shock-proof with ADP4 cover profile (see page 3/21) 2/40 Terminal blocks coloured WDU 2.5 WDU 4 W Max. Technical Data Dimensions Width/length/height (mm) With TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage / pollution severity Further technical data UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Blue Wemid Yellow Wemid Green Wemid Brown Wemid Grey Wemid o White Wemid Orange PA Red PA Violet PA Black PA End plate / partition WAP (Thickness 1,5 mm) Wemid Blue Wemid Yellow Wemid Green Wemid Brown Wemid WTW Grey Wemid o White Wemid Orange PA Red PA Violet PA Black PA Wemid Blue Wemid Cross-connection WQV WQB 8/24 Screen lug LS 2.8 2 pol. 3 pol. 4 pol. 10 pol. Notching tools: WAW 1 for WQV WAW 2 to notch the punch-out in the terminal moulding Test adapter WTA TA 1 * * * * * * * * * * * * * * * * * * * * * * Strain relief Test plug/Socket PS 2.3 StB 8.5 Screwdriver SDIK for StB Cat.No.: 902493 Cover WAD with symbol WAD white, for self-labeling Group marking T5 WGB Tag carrier for S 10 markers Marking tags DEK DEK WS Print Consecutive horizontal Consecutive vertical Blank WSI 6 W W W 32 A/4 mm2 46 A/6 mm2 16 A/1,5 mm2 6,3 A/- 5/60/47 10 mm/M 2,5/3,5 x 0,6 6/60/47 10 mm/M 3 /3,5 x 0,6 5/60/49 10 mm/M 2,5/3*/3,5 x 0,6 8/60/60 12 mm/M 3,5/4,0 x 0,8 800 V/24 A/2,5 mm2 8 kV/3 see Page 2/5 800 V/32 A /4 mm2 8 kV/3 see Page 2/7 800 V/16 A**/1,5 mm2 6 kV/3 see Page 2/20 500 V~/6,3 A***/6 mm2 6 kV/3 see Page 2/32 600 V/25 A/22...12 AWG 600 V/20 A/26...12 AWG W Best.Nr. Qty. 102000 100 102008 100 102002 100 102009 100 103771 100 103772 100 103680 100 102006 100 102004 100 103770 100 102001 100 Type Cat. No. Qty. WAP 2.5-10 105000 50 WAP 2.5-10 105008 50 WAP 2.5-10 105002 50 WAP 2.5-10 107220 50 WAP 2.5-10 105007 50 WAP 2.5-10 105005 50 WAP 2.5-10 105009 50 WAP 2.5-10 105006 50 WAP 2.5-10 105004 50 WAP 2.5-10 107221 50 WAP 2.5-10 105001 50 WTW 2.5-10 105010 20 WTW 2.5-10 105018 20 ZQV 2.5N Qty. WQV 2.5 Qty. 169380 60 105366 50 169381 60 105376 50 169382 60 105386 50 169388 20 105446 20 WQB B/24 157906 20 LS 2.8 105640 50 WAW 1 900450 - 600 V/35 A/22...10 AWG 600 V/35 A/26...10 AWG W Best.Nr. Qty. 102010 100 102018 100 102012 100 102016 100 103781 100 103780 100 103670 100 103676 100 102014 100 103782 100 102011 100 Type Cat. No. Qty. WAP 2.5-10 105000 50 WAP 2.5-10 105008 50 WAP 2.5-10 105002 50 WAP 2.5-10 107220 50 WAP 2.5-10 105007 50 WAP 2.5-10 105005 50 WAP 2.5-10 105009 50 WAP 2.5-10 105006 50 WAP 2.5-10 105004 50 WAP 2.5-10 107221 50 WAP 2.5-10 105001 50 WTW 2.5-10 105010 20 WTW 2.5-10 105018 20 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG without StB with 2 StB 101110 101120 101118 101128 101112 101122 101113 101123 101117 101127 101115 101125 101119 101129 101116 101126 101114 101124 101940 101950 101111 101121 Type Cat. No. WAP 2.5-10 105000 WAP 2.5-10 105008 WAP 2.5-10 105002 WAP 2.5-10 107220 WAP 2.5-10 105007 WAP 2.5-10 105005 WAP 2.5-10 105009 WAP 2.5-10 105006 WAP 2.5-10 105004 WAP 2.5-10 107221 WAP 2.5-10 105001 WTW 2.5-10 105010 WTW 2.5-10 105018 Qty. 100 100 100 100 100 100 100 100 100 100 100 Qty. 50 50 50 50 50 50 50 50 50 50 50 20 20 300 V/10 A/20...8 AWG 300 V/10 A/20...8 AWG W Best.Nr. Qty. 101100 50 101108 50 101102 50 101103 50 101107 50 101105 50 101109 50 101106 50 101104 50 101960 50 101101 50 Type Cat. No. Qty. WAP 2.5-10 105000 50 WAP 2.5-10 105008 50 WAP 2.5-10 105002 50 WAP 2.5-10 107220 50 WAP 2.5-10 105007 50 WAP 2.5-10 105005 50 WAP 2.5-10 105009 50 WAP 2.5-10 105006 50 WAP 2.5-10 105004 50 WAP 2.5-10 107221 50 WAP 2.5-10 105001 50 WTW 2.5-10 105010 20 WTW 2.5-10 105018 20 WQV WQV WQV WQV QL 2 QL 3 QL 4 QL 10 BS-M 2,5 x 4,5 021580 021590 021600 033800 106270 100 100 50 20 100 QL 2 QL 3 QL 4 QL 10 BS-M 3 x 5 019430 019440 019450 033830 105210 50 50 50 20 100 WAW 2 900451 - WAW 2 900451 - WTA 2 WTA 2/ZA WTA 2/10 ZE 1 163232 163233 163234 163215 PS 2.3 (o 2,3) PS 2.0 (o 2,0) StB 8.5 (o 2,3) StB 8.5 (o 2,0) 105196 105456 105466 105206 50 50 50 20 LS 2.8 WAW 1 105640 900450 50 - 50 50 5 50 WTA 3 WTA 3/ZA WTA 3/10 ZE 1 163235 163236 163237 163215 50 50 5 50 018040 029380 021570 126980 20 20 50 50 PS 2.3 (o 2,3) 018040 20 StB 8.5 (o 2,3) 028060 50 WAD 5 WAD 5 white 105346 105606 50 50 WAD 5 WAD 5 white 105346 105606 50 50 WGB 5 T5 SF 10 SG 10 105076 50 034850 100 033240 1000 033250 1000 WGB 5 T5 SF 10 SG 10 DEK 6 DEK 6 WS 12/6 DEK 5 047346 DEK 5 047356 WS 12/5 160986 For further accessories see section 3, further marking material see section 8 * with StB 2.3 ** Rated current limited to 1 A when used with diode-plug *** Max. power loss 1,6 W WTR 2.5 - - - 4/2 4/3 4/4 4/10 Fuse cartridges 5 x 20 and Fuse cartridges 5 x 25 see Page 2/93 PS 2.3 (o 2,3) 018040 20 105076 50 034850 100 033240 1000 033250 1000 Diode plug WSD 2,5 ( WSD 2,5 ) WSD 2,51) WSD 2,52) 105846 105856 105866 105876 25 25 25 25 046866 047356 160990 DEK 6 DEK 6 WS 12/5 046866 047356 160986 - - - - - - 2 1 2 PS 2.3 (o 2,3) 018040 20 DEK DEK WS 12/6,5 047346 047356 160992 - - - ) With wire bridge ) Without special parts 2/41 Z series system advantages Useful accessories for user-orientated problem solutions. Test adapters ZTA modular test adapters contact the current bar directly to ensure low contact resistance and a good circuit connection. The adapter is designed for permanent tee-off for completely wired terminal strips with cross-connections and markers fitted. Wire Guides For small cross-sections (< 1mm2/AWG 18 ) wire guides ensure solid and flexible wires are properly inserted into the clamping unit. * All conductor types can be connected, even with the rated cross-section with ferrule * Single-part PE contact for mechanical and electrical safety * TOP-connection system enables - easy access to clamping points - fast connection - clear arrangement * Time-saving plug-in 2...10-pole cross connect links * Integrated test point * Wemid-insulating material - Non-tracking KC > 600 - Heat resistant 120 C - Self-extinguishing V0 to UL - Contains no harmful substances 2/42 Marking systems The large terminal aperture size (test with gauge pins according to IEC 947-1) results in space savings and installed cost advantages, as the rated cross-section with ferrules fitted is connectable. The marker mounting channel is arranged in the centre of the terminal to prevent connected conductors from obscuring the markings. Marking can take place with Weidmuller dekafix and newly developed ZS hinged marker systems. The hinged marker is designed for up to eight-digit marking and is simply snap-fitted stripwise into the marking channel and placed over the cross-connection channels. Identification of functional groups can take place with ZGB group tag carriers. Cross-connection system Rational wiring is possible with two to tenpole ZQV, completely shock-hazard protected units; no small partitions or end cover plates for adjacent crossconnections are necessary. Up to forty connection points can be applied to a potential with only one cross-connection unit. The cross-connections can be loaded with the rated current of the corresponding cross-section. By breaking out individual or several contact elements, several terminals can be skipped to suit the particular application. For control-circuit terminals with two connection points, two parallel cross-connection channels are available. This enables two potentials to be routed within the terminal. Only in the case of these two applications does the rated voltage reduce from 800 V to 400 V. By means of prefitted adapters from the W series to the screwless Z series, combined use of both families on one mounting rail is possible. Connection of the WDU 6 or WDU 10 to the Z series takes place with the ZQW 1 adapter. From the WDU 16 or WDU 35, the connection is realised with the ZQW 2. With the ZPE protective conductor terminal, efficient contact to the mounting rail is established by simply snap-fitting the springloaded metal foot. The one-piece construction of the metal parts enables lateral movement of the terminal without damaging the PE contact. ZTR disconnect test terminals feature integral test sockets for PS 2.3 test plugs. The easy to operate disconnect lever clearly shows the disconnected or closed position. Fitting instructions for the Z series, Type ZMO1; Cat. no. 16108 Feed-through terminals and disconnect terminals or disconnect terminals as such can be cross connected. 2/43 Feed-through terminal blocks and terminal blocks with electronic components ZDU 2.5-2/3AN ZDU 2.5-2/4AN W W Max. Technical Data Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length mm VDE rated data, 0611 Part 1/8.92/IEC 947-7-1/1989 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Beige Wemid Blue Wemid Orange PA Terminal block 10-pole Wemid Terminal block printed 1...9 Wemid End plate / partition Version ZAP/TW Beige Wemid Blue Wemid Orange PA Cross-connection ZQV ZQW Connection of Z-series with WDU 6/WDU 10 by means of adapter type ZQW 1, with WDU 16/WDU 35 by adapter type ZQW 2 Test adapter ZTA Version Without pin With pin PS TA Screwdriver SD to DIN 5264-A Screen lug ZDU 2.5/3AN ZDU 2.5/3AN/10 W W 24 A/2,5 mm2 24 A/2,5 mm2 31 A/4 mm2 31 A/4 mm2 5/50,5/43 10 5/50,5/43 10 5/59,5/39 10 5/64/39 10 800 V/24 A/2,5 mm2 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 24 24 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 24 24 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 24 24 A2 -* -* Type Cat. No. ZDU 2.5-2/3AN 170601 ZDU 2.5-2/3AN BL170604 ZDU 2.5-2/3AN OR170605 Qty. 100 100 100 0,5...1,5 0,13...2,5 24 24 A2 -* -* Type Cat. No. ZDU 2.5-2/4AN 170606 ZDU 2.5-2/4AN BL170607 ZDU 2.5-2/4AN OR170608 Qty. 100 100 100 A3 600 V/25 A/26...12 AWG 600 V/27 A/26...12 AWG Type Cat. No. ZDU 2.5 160851 ZDU 2.5BL 160852 ZDU 2.5OR 163678 ZDU 2.5/10 162695 ZDU 2.5/10/BEZ165187 Qty. 100 100 100 10 10 A3 600 V/25 A/26...12 AWG 600 V/27 A/26...12 AWG Type Cat. No. ZDU 2.5/3AN 160854 ZDU 2.5/3AN BL 160855 ZDU 2.5/3AN OR 163679 ZDU 2.5/3AN/10 162696 ZDU 2.5/3AN/10/BEZ165188 Qty. 100 100 100 10 10 ZAP/TW7 ZAP/TW7BL ZAP/TW7OR 170611 170612 170613 50 50 50 ZAP/TW7 ZAP/TW7BL ZAP/TW7OR 170611 170612 170613 50 50 50 ZAP/TW1 ZAP/TW1BL ZAP/TW1OR 160874 160875 160876 50 50 50 ZAP/TW2 ZAP/TW2BL ZAP/TW2OR 160877 160878 160879 50 50 50 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQB 2.5 167712 50 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZTA 4/ZA 168811 25 ZTA 4/ZA 168811 25 ZTA 1 ZTA 1/ZA PS 2.3 160904 160905 018040 25 25 20 ZTA 1 ZTA 1/ZA PS 2.3 160904 160905 018040 25 25 20 TA 1 053586 20 TA 1 053586 20 PS 2.0 TA 1 029380 053586 20 20 PS 2.0 TA 1 029380 053586 20 20 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 LS 2.8 105640 50 ZAD 1/4 160911 20 ZAD 1/4 160911 20 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 LS 2.8 105640 50 Cover ZAD Group marking ZGB ZGB 30 161193 20 ESO Blank snap-on tag ESO 7 160772 240 STR Transparent protective cover STR 7 051530 20 Reducing sleeves*** Colour ZRH for conductor 0,13...0,2 mm2 White ZRH 1.5H/1 167881 100 ZRH for conductor 0,25...0,5 mm2 Grey ZRH 1.5H/2 167880 100 ZRH for conductor 0,75...1 mm2 Dark grey ZRH 1.5H/3 167879 100 Marking tags Print DEK Consecutive horizontal DEK 5 047346 500 DEK Consecutive vertical DEK 5 047356 500 ZS 10 Blank ZS 10/5 161000 480 ZS DEK ZS 10 Printed ZS 10/5 161001 480 See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight 2/44 ZDU 2.5 ZDU 2.5/10 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 167881 100 167880 100 167879 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too ZDU 2.5/4AN ZDU 2.5/4AN/10 ZDU 2.5/2 x 2 AN ZDU 2.5/2 x 2 AN/D ZDU 2.5/2 x 2 AN/10 W W 30 A/4 mm2 5/79/39 10 5/79/39 10 5/79/39 10 800 V/24 A/2,5 mm2 8 kV/3 800 V/24 A/2,5 mm2 8 kV/3 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 24 24 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 600 V/25 A/26...12 AWG 600 V/27 A/26...12 AWG Type Cat. No. ZDU 2.5/4AN 160857 ZDU 2.5/4AN BL 160858 ZDU 2.5/4AN OR 163680 ZDU 2.5/4AN/10 162697 ZDU 2.5/10/4AN/BEZ165189 Qty. 100 100 100 10 10 ZAP/TW3 ZAP/TW3BL ZAP/TW3OR 160880 160881 160882 50 50 50 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZTA 1 ZTA 1/ZA PS 2.3 PS 2.0 TA 1 160904 160905 018040 029380 053586 25 25 20 20 20 SD 0,6 x 3,5 902423 1 ZAD 1/4 160911 A3 600 V/25 A/26...12 AWG 300 V/27 A/26...12 AWG Type Cat. No. ZDU 2.5/2x2AN 160860 ZDU 2.5/2x2AN BL160861 ZDU 2.5/2x2AN OR163681 ZDU 2.5/2x2AN/10162698 ZAP/TW3 ZAP/TW3BL ZAP/TW3OR 160880 160881 160882 Qty. 100 100 100 10 50 50 50 ZDU 4 ZDU 4/10 ZDU 6 ZDU 6/10 W W W 30 A/4 mm2 A3 ZDU 2.5/2x2 AN/LD W 41 A/6 mm2 57 A/10 mm2 5/79/39 10 6/62/43,5 12 8/65/45,5 13 400 V****/1 A/2,5 mm2 6 kV/3 24 V-/<5 mA/2,5 mm2 800 V/32 A/4 mm2 8 kV/3 800 V/41 A/6 mm2 8 kV/3 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...6 0,5...6 0,5...4 0,5...4 0,21...6 32 32 0,5...10 0,5...10 0,5...6 0,5...6 0,21...10 41 41 A3 A3 Type Cat. No. Qty. ZDU 2.5/2x2AN/D+165034 20 mit Diode ) ZDU 2.5/2x2AN/D- 165035 20 mit Diode ( Type Cat. No. Qty. ZDU2.5/2x2AN/LD+ 169259 20 mit LED rot ) ZDU2.5/2x2AN/LD- 169260 20 mit LED red( ZAP/TW3 ZAP/TW3BL ZAP/TW3OR ZAP/TW3 ZAP/TW3BL ZAP/TW3OR 160880 160881 160882 50 50 50 160880 160881 160882 50 50 50 A4 600 V/33 A/26...10 AWG 600 V/35 A/26...10 AWG Type Cat. No. ZDU 4 163205 ZDU 4 BL 163206 ZDU 4 OR 163683 ZDU 4/10 163207 ZDU 4/10/BEZ 165190 Qty. 100 100 100 10 10 2 A5 600 V/45 A/22...8 AWG 600 V/50 A/20...8 AWG Type Cat. No. Qty. ZDU 6 160862 50 ZDU 6 BL 160863 50 ZDU 6 OR 163682 50 ZDU 6/10 163143 5 ZAP/TW4 ZAP/TW4BL ZAP/TW4OR 163209 163210 163211 50 50 50 ZAP/TW5 ZAP/TW5BL ZAP/TW5OR 160883 160884 160885 50 50 50 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 4/2 4/3 4/4 4/5 4/6 4/7 4/8 4/9 4/10 160895 160896 160897 160898 160899 160900 160901 160902 160903 60 60 60 20 20 20 20 20 20 ZQV 6/2 ZQV 6/3 ZQV 6/4 162785 162786 162787 60 60 60 ZTA 3 165405 25 TA 1 053586 20 SD 1 x 5,5 902429 1 ZTA 1 ZTA 1/ZA PS 2.3 160904 160905 018040 25 25 20 ZTA 1 ZTA 1/ZA PS 2.3 160904 160905 018040 25 25 20 ZTA 1 ZTA 1/ZA PS 2.3 160904 160905 018040 25 25 20 ZTA 2 ZTA 2/ZA PS 2.3 160906 160907 018040 25 25 20 PS 2.0 TA 1 029380 053586 20 20 PS 2.0 TA 1 029380 053586 20 20 PS 2.0 TA 1 029380 053586 20 20 PS 2.0 TA 1 029380 053586 20 20 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 20 ZAD 1/4 160911 20 ZAD 1/4 160911 20 ZAD 1/4 160911 20 ZAD 2/4 160908 20 ZAD 3/4 160912 20 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 4/1 ZRH 4/2 ZRH 4/3 163664 163665 163666 100 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 6 DEK 6 ZS 12/6 ZS 12/6 046866 046876 161002 161003 500 500 400 400 DEK 8 DEK 8 ZS 12/6 ZS 12/6 127696 128966 161002 161003 500 500 400 400 *** Standard pack includes 100 strips for 10 poles each **** Soldered diodes: Type 1N 4007, reverse voltage 1000 V/current 1 A 2/45 Feed-through terminal blocks and terminal blocks with electronic components ZDK 2.5/1.5 ZDK 2.5/1.5 V W Max. Technical Data Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length mm VDE rated data, 0611 Part 1/8.92/IEC 947-7-1/1989 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/11) mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2 Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Wemid Blue Wemid Orange PA End plate / partition ZAP/TW Version Wemid Orange PA Cross-connection ZQV Test adapter ZTA Version With pin Screwdriver SD to DIN 5264-A Group marking ZGB ESO STR Reducing sleeves**** ZRH for conductor 0,13...0,2 mm2 ZRH for conductor 0,25...0,5 mm2 ZRH for conductor 0,75...1 mm2 Blank snap-on tag Transparent protective cover Colour White Grey Dark grey Marking tags Print DEK Consecutive horizontal DEK Consecutive vertical ZS 10 Blank ZS 10 Printed ZS DEK See page 2/60 as well as section 3 for additional accessories 1) Ferrules crimped gas-tight 2/46 ZDK 2.5/1.5 N-DU ZDK 2.5/1.5 DU-PE W W W -/- -/- -/- -/- 5/79/54 10 5/79/54 10 5/79/54 10 5/79/54 10 500 V/24 A/2.5 mm2 6 kV/3 500 V/24 A/2.5 mm2 6 kV/3 500 V/24 A/2.5 mm2 6 kV/3 -- V/24 A/2.5 mm2 6 kV/3 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 24 24 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 24 24 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 24 24 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 24 24 A2 * * A2 * * Type ZDK 2.5/1.5 ZDK 2.5/1.5 BL ZDK 2.5/1.5 OR Cat. No. Qty. 167430 50 167863 50 169414 50 Type ZDK2.5/1.5 V Cat. No. Qty. 168999 50 A2 A2 * * * * Type Cat. No. Qty. ZDK2.5/1.5N-DU 168996 50 Type Cat. No. Qty. ZDK2.5/1.5DU-PE168997 50 ZAP TW 2.5/1.5 167473 ZAP TW 2.5/1.5 169008 20 20 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZTA 4 / ZA 168811 25 ZTA 4 / ZA 168811 25 ZTA 4 / ZA 168811 25 ZTA 4 / ZA 168811 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 * Approvals applied for **** Standard pack includes 100 strips for 10 poles each 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 2) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too ZDK 2.5/1.5 N-PE ZDK 2.5/1.5/LD/1 ZDK 2.5/1.5/LD/2 ZDK 2.5/1.5/D/1...6 W W LD1 W LD2 D2 D4 D5 D6 -/- -/- -/- 5/79/54 10 5/79/54 10 5/79/54 10 -V /24 A/2.5 mm2 6 kV/3 24 V-/<5 mA***/2.5 mm2 - 500 V**/10 A***/2.5 mm2 6 kV/3 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 24 24 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 0.5...2.5 0.5...2.5 0.5...1,52) 0.5...1,5 0,13...2,5 A2 D1 A2 2 A2 * * Type Cat. No. Qty. ZDK2.5/1.5N-PE168998 50 Type Cat. No. Qty. ZDK2.5/1.5LD 1 169001 50 ZDK2.5/1.5LD 2 169394 50 Type ZDK2.5/1.5 D 1 ZDK2.5/1.5 D 2 ZDK2.5/1.5 D 4 ZDK2.5/1.5 D 5 ZDK2.5/1.5 D 6 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZAP TW 2.5/1.5167473 ZAP TW 2.5/1.5169008 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZTA 4 / ZA 168811 25 ZTA 4 / ZA 168811 25 ZTA 4 / ZA 168811 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 ZRH 1.5 H/1 ZRH 1.5 H/2 ZRH 1.5 H/3 167881 167880 167879 100 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 Cat. No. Qty. 169002 50 169003 50 169004 50 169005 50 169006 50 ** Equipped with diode type 1N 4007,reverse voltage 1000 V, current 1 A *** current of through-busbar = 10 A 2/47 Protective conductor terminal blocks ZPE 2.5-2/3AN ZPE 2.5-2/4AN W W Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length mm Bemessungsdaten IEC947-7-2 Rated voltage / current PEN / cross-section Rated voltage / rated impulse voltage / pollution severity to VDE 0110/1.89 to adjacent terminal Further technical data Clampable conductor: solid H07V-U flexible H07V-K with ferrule to DIN 46 228/1** with ferrule with plastic insulating collar** mm2 mm2 mm2 mm2 ZPE 2.5 ZPE 2.5/3AN W W 5/50,5/43 10 5/50,5/43 10 5/59,5/39 10 5/64/39 10 -V/-A/2,5 mm2 800 V/8 kV/3 -V/-A/2,5 mm2 800 V/8 kV/3 -V/-A/2,5 mm2 800 V/8 kV/3 -V/-A/2,5 mm2 800 V/8 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,5...4 0,5...4 0,5...2,5 0,5...2,5 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size 0,13...2,5 UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size * * * * -V/-A/26...12 AWG -V/-A/26...12 AWG -V/-A/26...12 AWG -V/-A/26...12 AWG Type Cat. No. Qty. ZPE 2.5-2/3AN 170609 100 Type Cat. No. Qty. ZPE 2.5-2/4AN 170610 100 Type ZPE 2.5 Cat. No. Qty. 160864 100 Type ZPE 2.5/3AN Cat. No. Qty. 160865 100 ZAP/TW7 170611 50 ZAP/TW7 170611 50 ZAP/TW1 160874 50 ZAP/TW2 160877 50 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 ZTA 4/ZA TA 1 168811 053586 25 20 ZTA 4/ZA TA 1 168811 053586 25 20 ZTA 1 ZTA 1/ZA TA 1 PS 2.3 PS 2.0 160904 160905 053586 018040 029380 25 25 20 20 20 ZTA 1 ZTA 1/ZA TA 1 PS 2.3 PS 2.0 160904 160905 053586 018040 029380 25 25 20 20 20 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 167881 167880 167879 100 100 100 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 167881 167880 167879 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 UL CSA Ordering data Version Green/yellow Wemid End plate / partition ZAP/TW Version Beige Wemid Support block SH A2 0,13...2,5 A2 0,13...4 A3 0,13...4 A3 For insulation of mounting rails in insulated-earth installations Test adapter ZTA Version Without pin With pin PS TA Screwdriver SD to DIN 5264-A Group marking ZGB ESO STR Blank snap-on tag Transparent protective cover Reducing sleeves*** ZRH for conductor 0,13...0,2 mm2 ZRH for conductor 0,25...0,5 mm2 ZRH for conductor 0,75...1 mm2 Marking tags DEK DEK ZS 10 ZS 10 DEK Colour White Grey Dark grey Print Consecutive horizontal Consecutive vertical Blank Printed ZS See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight 2/48 *** Standard pack includes 100 strips for 10 poles each 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too ZPE 2.5/4AN ZDK 2.5/1.5 PE W ZDK 2.5/1.5 DU-PE ZDK 2.5/1.5 N-PE W ZPE 4 W W ZPE 6 W W 5/79/39 10 5/79/54 10 5/79/54 10 5/79/54 10 6 /62 /43,5 12 8/65/45,5 13 -V/-A/2,5 mm2 800 V/8 kV/3 -V/-A/2,5 mm2 500/6 kV/3 -V/24A/2,5 mm2 500/6 kV/3 -V/-A/2,5 mm2 500/6 kV/3 -V/-A/4 mm2 800 V/8 kV/3 -V/-A/6mm2 800 V/8 kV/3 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,5...6 0,5...6 0,5...4 0,5...4 0,5...10 0,5...10 0,5...6 0,5...6 0,13...4 A3 0,13...2,5 A2 0,13...2,5 A2 0,13...2,5 A2 0,21...6 A4 2 0,21...10 A5 -V/-A/26...12 AWG -V/-A/26...12 AWG * * * * * * -V/-A/26...10 AWG -V/-A/26...10 AWG -V/-A/22...8 AWG -V/-A/20...8 AWG Type ZPE 2.5/4AN Cat. No. Qty. 160866 100 Type Cat. No. Qty. ZDK 2.5/1.5 PE 169000 50 Type Cat. No. Qty. ZDK 2.5/1.5 DU-PE 168997 50 Type Cat. No. Qty. ZDK 2.5/1.5 N-PE 168998 50 Type ZPE 4 Cat. No. Qty. 163208 100 Type ZPE 6 Cat. No. Qty. 160867 50 ZAP/TW3 160880 50 ZAP/TW ZDK2.5 167473 50 ZAP/TW ZDK2.5 167473 50 ZAP/TW ZDK2.5 167473 50 ZAP/TW4 163209 50 ZAP/TW5 160883 50 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 ZTA 1 ZTA 1/ZA TA 1 PS 2.3 PS 2.0 160904 160905 053586 018040 029380 25 25 20 20 20 ZTA 4/ZA 168811 25 ZTA 4/ZA 168811 25 25 25 20 20 20 25 25 160906 160907 053586 018040 029380 165405 168811 ZTA 2 ZTA 2/ZA TA 1 PS 2.3 PS 2.0 ZTA 3 ZTA 4/ZA TA 1 053586 20 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 1 x 5,5 902429 1 ZGB 30 ESO 7 STR 7 161193 160772 051530 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 DEK 5 DEK 5 ZS 10/5 ZS 10/5 DEK 8 DEK 8 ZS 12/6 ZS 12/6 127696 128966 161002 161003 500 500 400 400 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 161430 161429 161428 100 100 100 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 SD 0,6 x 3,5 902423 1 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 167881 167880 167879 100 100 100 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 167881 167880 167879 100 100 100 ZRH 1.5H/1 ZRH 1.5H/2 ZRH 1.5H/3 167881 167880 167879 100 100 100 ZRH 4/1 ZRH 4/2 ZRH 4/3 163664 163665 163666 100 100 100 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 6 DEK 6 ZS 12/6 ZS 12/6 046866 046876 161002 161003 500 500 400 400 2/49 Disconnect test terminal blocks ZTR 2.5 ZTR 2.5/3 AN W Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length mm Bemessungsdaten Rated voltage / current / cross-section Rated impulse voltage / pollution severity, VDE 0110/1.89 Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1*** mm2 with ferrule with plastic insulating collar*** mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size UL / CSA rated data Voltage / current / conductor size Ordering data Version Wemid Blue Wemid Orange PA Without disconnect lever With diode ) With diode ( With wire link Version Wemid Blue Wemid Orange PA End plate / partition ZAP/TW Cross-connection ZQV ZQW Connection of Z-series with WDU 6/WDU 10 by means of adapter type ZQW 1, with WDU 16/WDU 35 by adapter type ZQW 2 Test adapter/Test plugs ZTA Version Without pin With pin PS Screwdriver SD to DIN 5264-A Cover ZAD Reducing sleeves**** ZRH for conductor 0,13...0,2 mm2 ZRH for conductor 0,25...0,5 mm2 ZRH for conductor 0,75...1 mm2 Diode plug (spare) Colour White Grey Dark grey ) ( With wire link Without special components Group marking ZGB ESO STR Marking tags DEK DEK ZS 10 ZS 10 DEK Blank snap-on tag Transparent protective cover Print Consecutive horizontal Consecutive vertical Blank ZS Printed See page 2/60 as well as section 3 for additional accessories * Approvals applied for *** Ferrules crimped gas-tight 2/50 ZTR 2.5/D W ZTR 2.5/3 AN/D W W 5/68/41 10 5/83/41 10 5/68/57 10 5/83/57 10 400 V/18 A**/2,5 mm2 6 kV/3 400 V/16 A**/2,5 mm2 6 kV/3 400 V/10 A**/2,5 mm2 6 kV/3 400 V/10 A**/2,5 mm2 6 kV/3 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 A3 300 V/10 A/26...12 AWG Type Cat. No. ZTR 2.5 160868 ZTR 2.5BL 160869 ZTR 2.5OR 163684 ZTR 2.5/O.TNHE 160870 A3 * Qty. 100 100 100 100 Type Cat. No. ZTR 2,5/3AN 166830 ZTR 2,5/3ANBL 167030 ZTR 2,5/3ANOR167032 ZTR 2,5/3ANO.TNHE 167031 Qty. 100 100 100 100 A3 A3 300 V/- A/26...12 AWG Type Cat. No. Qty. * ZTR 2.5/D+ 160871 ZTR 2.5/D- 160872 ZTR 2.5/D/DRBR 160873 50 50 50 ZTR 2.5/3AN/D+ 167033 ZTR 2.5/3AN/D/DRBR 167035 50 50 50 Type Cat. No. Qty. ZTR 2.5/3AN/D- 167034 ZAP/TW2 ZAP/TW2BL ZAP/TW2OR 160877 160878 160879 50 50 50 ZAP/TW3 ZAP/TW3BL ZAP/TW3OR 160880 160881 160882 50 50 50 ZAP/TW2 ZAP/TW2BL ZAP/TW2OR 160877 160878 160879 50 50 50 ZAP/TW3 ZAP/TW3BL ZAP/TW3OR 160880 160881 160882 50 50 50 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 ZQW 1 ZQW 2 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 161143 161144 60 60 60 20 20 20 20 20 20 20 5 5 ZTA 1 ZTA 1/ZA PS 2.0 PS 2.3 160904 160905 029380 018040 25 25 20 20 ZTA 1 ZTA 1/ZA PS 2.0 PS 2.3 160904 160905 029380 018040 25 25 20 20 ZTA 1 ZTA 1/ZA PS 2.0 PS 2.3 160904 160905 029380 018040 25 25 20 20 ZTA 1 ZTA 1/ZA PS 2.0 PS 2.3 160904 160905 029380 018040 25 25 20 20 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZAD 1/4 160911 20 ZAD 1/4 160911 20 ZAD 1/4 160911 20 ZAD 1/4 160911 20 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 ZRH 2.5/1 ZRH 2.5/2 ZRH 2.5/3 161430 161429 161428 100 100 100 WSD WSD WSD WSD 105856 105846 105866 105876 25 25 25 25 WSD WSD WSD WSD 105856 105846 105866 105876 25 25 25 25 WSD WSD WSD WSD 105856 105846 105866 105876 25 25 25 25 WSD WSD WSD WSD 105856 105846 105866 105876 25 25 25 25 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 ZGB 30 161193 20 ZGB 30 161193 20 ZGB 30 161193 20 ZGB 30 161193 20 ESO 7 STR 7 160772 051530 240 20 ESO 7 STR 7 160772 051530 240 20 ESO 7 STR 7 160772 051530 240 20 ESO 7 STR 7 160772 051530 240 20 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 ** The rated current is limited to 1 A by using the diode plug with Diode type 1 N 4007, reverse voltage 1000 V, current 1 A **** Standard pack includes 100 strips for 10 poles each Fuse terminal blocks ZSI 2.5 ZSI 2.5/2 for metric fuses for inch fuses W W Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length mm Rated data Terminal block base: Rated voltage / current / cross-section Rated impulse voltage / pollution severity to VDE 0110/1.89 Fuse switches: Fuse cartridges to VDE 0820 Dissipation at 23 C and 1.5 x I rated current - Single arrangement W Combined arrangement W Further technical data Clampable conductor: solid H07V-U flexible H07V-K with ferrule to DIN 46 228/1*** with ferrule with plastic insulating collar*** Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size 8/79/74 10 12/79/74 10 500 V/6,3 A/2,5 mm2 6 kV/3 500 V/10 A/2,5 mm2 6 kV/3 5 x 20 mm 1/4" x 1/1/4" (6,3 x 32 mm) 2,5 1,6 2,5 2,5 Size 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 0,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4 UL CSA 600 V/10 A/26...12 AWG 600 V/15 A/26...12 AWG 600 V/16 A/26...12 AWG 600 V/15 A/26...12 AWG Type ZSI 2.5 ZSI 2.5/LD ZSI 2.5/LD ZSI 2.5/LD ZSI 2.5/LD ZSI 2.5/LD Type ZSI 2.5 ZSI 2.5/2LD ZSI 2.5/2LD ZSI 2.5/2LD ZSI 2.5/2LD mm2 mm2 mm2 mm2 Ordering data/Version Wemid Wemid/with 1 LED Wemid/with 1 LED Wemid/with 1 LED Wemid/with 1 LED Wemid/with 1 LED End plate / partition ZAP/TW Rated impulse voltage 500 V 250 V~/110 V- 80...120 V~/40...60 V- 30...60 V~/15...30 V- 10...24 V~/5...14 V- 24 V- Version Wemid Blue Wemid Orange PA ZAP TNHE/ZSI 2.5 Wemid Cross-connection ZQV Test adapter ZTA Version Without pin With pin Screwdriver SD to DIN 5264-A Group marking ZGB ESO Blank snap-on tag STR Transparent protective cover Marking tags Print DEK 5 Consecutive horizontal DEK 5 Consecutive vertical ZS 10 Blank ZS 10 Printed DEK ZS WS 10 Blank WS 10 vertical Printed WS 10 horizontal Printed See page 2/60 as well as section 3 for additional accessories *** Ferrules crimped gas-tight A3 Cat. No. Qty. 161640 50 161641 50 161642 50 161643 50 161644 50 161645 50 ZAP/TW3 160880 ZAP/TW3BL 160881 ZAP/TW3OR 160882 ZAP TNHE/ZSI 2.5 161084 50 50 50 25 ZQV 6/2 ZQV 6/3 ZQV 6/4 162785 162786 162787 ZTA 1 ZTA 1/ZA 2 A3 Cat. No. Qty. 161646 25 161650 25 161649 25 161648 25 161647 25 ZAP TNHE/ZSI 2.5 161084 25 60 60 60 ZQS ZQS ZQS ZQS 163320 163321 163322 163323 20 20 20 20 160904 160905 25 25 ZTA 1 ZTA 1/ZA 160904 160905 25 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 ZGB 30 ESO 7 STR 7 161193 160772 051530 20 240 20 DEK 5 DEK 5 ZS 10/5 ZS 10/5 WS 10/5 WS 10/5 WS 10/5 047346 047356 161000 161001 106086 144706 144716 500 500 480 480 200 200 200 DEK 5 DEK 5 ZS 10/5 ZS 10/5 WS 10/5 WS 10/5 WS 10/5 047346 047356 161000 161001 106086 144706 144716 500 500 480 480 200 200 200 2.5/2 2.5/3 2.5/4 2.5/5 Fitting the ZAP TNHE 2.5 end plate Fitting the ZSI 2.5/... cross connect link The end plates are supplied individually and are only required as a cover for the fuse holder at the end of a terminal strip. The end plate can be used for the ZSI 2.5 and ZSI 2.5/2. Before fitting the cross connect link, the cross connect link window must be removed. Do not break out the side window of the last terminal. Cat.-Nr. for G-fuse inserts see Page 2/93 2/51 Modular terminal blocks for plug-in connectors Modular functional units form the key-element for production systems constructed according to the building-block principle. Costly installation times can be reduced significantly, and sub-units can be rapidly replaced when maintenance or servicing is carried out. Terminal blocks using plug-in connectors are tailor-made for this type of application. They enable functional units to be replaced rapidly, and the control system can be supplemented or modified without any problems. WDU 2.5/BLZ WDK 2.5/BLZ ZKBD 2.5/1.5 ZKSD 2.5/1.5 ZRV 1.5 All types can be coded without reducing the number of available connections. The terminals can be used for up to 20 or 18.5 A. The WDK version saves significantly on space as it not only takes up less room along the mounting rail, but also across, as two identical connectors can be plugged in from the top. The prime feature of the new ZKBD and ZKSD terminal blocks for plug-in connectors is their modular construction. This system employs terminal block technology where ZKBD and ZKSD form the base terminals and ZSLD and ZBLD are the plugin connectors. The Weidmuller tension clamp system is used to connect the conductors. This system enables functional units to be prefitted as well as tested with test plugs. This applies equally to the reciprocal component which could be a terminal strip wired up to a machine, or in a lift, tram or underground railway, etc. On account of its low height of 55 mm (plus space taken up by loop in cable), this system can even be mounted inside very flat enclosures. The width of only 5 mm and the 4 through-connections reduce the length of the terminal block assemblies and make more space available inside the control cabinet. Conductors are attached on the terminal side by means of tension clamp connections using a top-entry system, and on the plug-in connector side by crimped contacts. The ZRV 1.5 is available as either a plain feedthrough terminal or combined with a PE connection. Reciprocally coded plugs, which cannot be connected the wrong way round, are available for both the plain feedthrough terminal and the feedthrough terminal with PE connection. It is also possible to fit these plugs through PG 11 gland entries, so that a PG threaded cable gland can be attached to the cable in advance. As cross-connections are possible within each of the 4 levels, voltages can be distributed systematically or even linked circuits can be created. l pitch: 5.08 and 7.62 mm l rated voltage: 250 and 500 V l versions with LED's l mounting brackets for firmly securing plug-in connectors l for BLZ and BLA systems 2/52 l modular construction; plug-in connectors for between 2 and 12 poles l base terminal as well as plug-in connector are each equipped with two connections and two cross-connection channels l coding system that does not reduce number of poles l resistant to shaking or vibrations l no end or partition plates required, therefore no break in the pitch and less planning effort ZRV 1.5 ZRV 1.5 STGH ZRV 1.5 ZRV 1.5PE STGH ZRV 1.5/PE Terminal block for plug-in connectors W W Dimensions Width / length / height (mm) Width / length / height (mm) with TS 35 x 7,5 W Including plugged connector: Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Rated voltage / current / cross-section Further technical data Clampable conductor: solid H07V-U flexible H07V-K with ferrule to DIN 46 228/1 with ferrule with plastic insulating collar Max. Clamping Range in mm2 Gauge pin to IEC 9471/1988 Size UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data mm2 mm2 mm2 mm2 mm2 UL CSA Base terminal 5,0/89,2/51,8 Plug-in connector 5,0/23,0/16.8 - Base terminal 5,0/89,2/51,8 Plug-in connector 5,0/23,0/16.8 - 5,0/89,2/55.0 8 mm/-/- 4 mm/-/- 5,0/89,2/55.0 8 mm/-/- 4 mm/-/- 63 V/4 A/1,5 mm2 63 V/4 A/1,0 mm2 63 V/4 A/1,5 mm2 63 V/4 A/1,0 mm2 Tension clamp connection 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 A1 Tension clamp connection 0,2...0,35/0,5...1,0 - Tension clamp connection 0,2...0,35/0,5...1,0 - - Tension clamp connection 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 A1 150 V/10 A/26...14 AWG submitted Type Cat. No. Qty. ZRV 1.5 169816 50 150 V/10 A/26...14 AWG submitted Type Cat. No. Qty. STGH ZRV 1.5 169819 50 150 V/10 A/26...14 AWG submitted Type Cat. No. Qty. ZRV 1.5 PE 169817 50 150 V/10 A/26...14 AWG submitted Type Cat. No. Qty. STGH ZRV1.5/PE169820 50 2 - Crimp contacts/Crimping tool 0,2...0,35 mm2 0,2...0,35 mm2 0,5...1,0 mm2 0,5...1,0 mm2 170533 170531 170534 170532 5000 500 5000 500 170533 170531 170534 170532 5000 500 5000 500 Crimping tool HTF - ZRV 901484 1 901484 1 Crimping insert 170535 1 170535 1 End Plate Cross-connection ZQV 2.5 2-pole 3-pole 4-pole 5-pole 7-pole 8-pole 9-pole 10-pole 50-pole* Screwdriver SD to DIN 5264-A AP ZRV1.5 169818 10 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 160886 160887 160888 160889 160191 160192 160193 160194 169754 SD 0,6 x 3,5 902423 - AP ZRV1.5 169818 10 60 60 60 20 20 20 20 20 20 ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 160886 160887 160888 160889 160191 160192 160193 160194 169754 60 60 60 20 20 20 20 20 20 1 SD 0,6 x 3,5 902423 1 - Marking tags dekafix, WS 10 DEK E-Fix unprinted 157372 Var.0002 dekafix, WS 10 E-Fix unprinted 157372 Var.0002 ZS See page 2/60 as well as section 3 for additional accessories * Cross-connection can be easily cut off for required number of poles 2/53 Pluggable Terminal blocks ZKBD 2.5/1.5 ZKSD 2.5/1.5 SLZF BLZF ZSLD ZBLD W W Dimensions Width / length / height plugged in (mm) with TS 35 x 7,5 W Insulation stripping length mm Bemessungsdaten Rated voltage / current / cross-section Rated insulation voltage to VDE 0110 / 2.89 / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Base terminal block Wemid Connector End plate / partition/Fixing bracket ZAP Version Wemid Orange PA Orange PA Cross-connection ZQV 2.5 Test adapter ZTA Version With pin Screwdriver SD to DIN 5264-A Group marking ZGB ESO Blank snap-on tag STR Transparent protective cover Reducing sleeves*** Colour ZRH for conductor 0,13...0,2 mm2 White ZRH for conductor 0,25...0,5 mm2 Grey ZRH for conductor 0,75...1 mm2 Dark grey Marking tags Print DEK Consecutive horizontal DEK Consecutive vertical ZS 10 Blank ZS 10 Printed DEK ZS See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight *** Standard pack includes 100 strips for 10 poles each 2/54 ZKBD / ZSLD 5/79/62 8 ZKBD / SLZF 5/79/49 7 ZKSD / ZBLD 5/79/62 8 ZKSD / BLZF 5/79/49 7 250 V/16 A/2,5 mm2 4 kV/3 250 V/16 A/1,5 mm2 4 kV/3 250 V/16 A/2,5 mm2 4 kV/3 250 V/16 A/1,5 mm2 4 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 16 16 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 16 16 A2 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 Cat. No. 169761 Type BLZF 5.08/2 BLZF 5.08/3 BLZF 5.08/4 BLZF 5.08/5 BLZF 5.08/6 BLZF 5.08/7 BLZF 5.08/8 BLZF 5.08/9 BLZF 5.08/10 BLZF 5.08/11 BLZF 5.08/12 Cat. No. 167991 167992 167993 167994 167995 167996 167997 167998 167999 168000 168001 Qty. 100 Qty. 100 100 100 50 50 50 50 50 50 50 50 ZAP 6 ZAP 6 ZAP/VR 1 168830 168833 168831 50 50 50 A2 A1 * * A1 * * Type ZKBD 2.5 /1.5 Type ZSLD 2.5/1.5/2 ZSLD 2.5/1.5/3 ZSLD 2.5/1.5/4 ZSLD 2.5/1.5/5 ZSLD 2.5/1.5/6 ZSLD 2.5/1.5/7 ZSLD 2.5/1.5/8 ZSLD 2.5/1.5/9 ZSLD 2.5/1.5/10 ZSLD 2.5/1.5/11 ZSLD 2.5/1.5/12 Type ZKSD 2.5 /1.5 Type ZBLD 2.5/1.5/2 ZBLD 2.5/1.5/3 ZBLD2.5/1.5/4 ZBLD2.5/1.5/5 ZBLD2.5/1.5/6 ZBLD2.5/1.5/7 ZBLD2.5/1.5/8 ZBLD2.5/1.5/9 ZBLD2.5/1.5/10 ZBLD2.5/1.5/11 ZBLD2.5/1.5/12 Cat. No. 168828 168829 168889 168890 168891 168892 168893 168894 168895 168896 168897 Cat. No. 169763 169764 169765 169766 169767 169768 169769 169770 169771 169772 169773 Qty. 25 25 25 20 20 20 20 10 10 10 10 ZAP/TW 3 ZAP/TW 3 ZVR 160880 160882 168834 50 50 20 ZAP/TW 3 ZAP/TW 3 ZVR 160880 160882 168834 50 50 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV 160886 160887 160888 160889 160890 160891 160892 160893 160894 169754 60 60 60 20 20 20 20 20 20 20 ZTA 4/ZA 168811 25 ZTA 4/ZA 168811 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZRH 1.5H /1 167881 100 ZRH 1.5N /1 163214 100 ZRH 1.5H /1 167881 100 ZRH 1.5N /1 163214 100 ZRH 1.5H /2 ZRH 1.5H /3 167880 100 167879 100 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 100 100 ZRH 1.5H /2 ZRH 1.5H /3 167880 100 167879 100 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 100 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 Cat. No. 168826 Qty. Type 25 SLZF 5,08/2 25 SLZF 5,08/3 25 SLZF 5,08/4 20 SLZF 5,08/5 20 SLZF 5,08/6 20 SLZF 5,08/7 20 SLZF 5,08/8 10 SLZF 5,08/9 10 SLZF 5,08/10 10 SLZF 5,08/11 10 SLZF 5,08/12 ZAP 6 ZAP 6 ZAP/VR 1 Cat. No. 167945 167946 167947 167948 167949 167950 167951 167952 167953 167954 167955 Qty. 100 Qty. 100 100 100 50 50 50 50 50 50 50 50 168830 168833 168831 50 50 50 500 500 480 480 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too 2.5/2 2.5/3 2.5/4 2.5/5 2.5/6 2.5/7 2.5/8 2.5/9 2.5/10 2.5/50 500 500 480 480 BLZF Pluggable Ground Terminal block ZKBD 2.5/1.5 PE ZKSD 2.5/1.5 PE SLZF ZBLD ZSLD W W Dimensions Width / length / height plugged in (mm) with TS 35 x 7,5 W Insulation stripping length mm Rated data Rated voltage / current PEN / cross-section Rated voltage / rated impulse voltage / pollution severity to VDE 0110/1.89 to adjacent terminal Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Base terminal block Green/yellow Wemid Connector End plate / partition / Fixing bracket ZAP Version Wemid Orange PA Orange PA Support block SH ZKBD PE / ZSLD 5/79/62 8 ZKBD PE / SLZF 5/79/49 7 ZKSD PE / ZBLD 5/79/62 8 ZKSD PE / BLZF 5/79/49 7 -V/-A/2,5 mm2 250 V/4 kV/3 -V/-A/1,5 mm2 250 V/4 kV/3 -V/-A/2,5 mm2 250 V/4 kV/3 -V/-A/1,5 mm2 250 V/4 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 A2 A1 * * A2 2 A1 * * Type ZKBD 2.5 /1.5 PE Type Cat. No. ZSLD 2.5/1.5/2 168828 ZSLD 2.5/1.5/3 168829 ZSLD 2.5/1.5/4 168889 ZSLD 2.5/1.5/5 168890 ZSLD 2.5/1.5/6 168891 ZSLD 2.5/1.5/7 168892 ZSLD 2.5/1.5/8 168893 ZSLD 2.5/1.5/9 168894 ZSLD 2.5/1.5/10 168895 ZSLD 2.5/1.5/11 168896 ZSLD 2.5/1.5/12 168897 Cat. No. 168827 Qty. Type 25 SLZF 5,08/2 25 SLZF 5,08/3 25 SLZF 5,08/4 20 SLZF 5,08/5 20 SLZF 5,08/6 20 SLZF 5,08/7 20 SLZF 5,08/8 10 SLZF 5,08/9 10 SLZF 5,08/10 10 SLZF 5,08/11 10 SLZF 5,08/12 ZAP/TW 3 ZAP/TW 3 ZVR 160880 160882 168834 50 50 20 SH 2 049492 ZTA 4/ZA ZAP 6 ZAP 6 ZAP/VR 1 Cat. No. 167945 167946 167947 167948 167949 167950 167951 167952 167953 167954 167955 Qty. 100 Qty. 100 100 100 50 50 50 50 50 50 50 50 168830 168833 168831 50 50 50 Type ZKSD 2.5/1.5 PE Type Cat. No. ZBLD 2.5/1.5/2 169763 ZBLD 2.5/1.5/3 169764 ZBLD2.5/1.5/4 169765 ZBLD2.5/1.5/5 169766 ZBLD2.5/1.5/6 169767 ZBLD2.5/1.5/7 169768 ZBLD2.5/1.5/8 169769 ZBLD2.5/1.5/9 169770 ZBLD2.5/1.5/10 169771 ZBLD2.5/1.5/11 169772 ZBLD2.5/1.5/12 169773 Cat. No. 169762 Qty. Type 25 BLZF 5.08/2 25 BLZF 5.08/3 25 BLZF 5.08/4 20 BLZF 5.08/5 20 BLZF 5.08/6 20 BLZF 5.08/7 20 BLZF 5.08/8 10 BLZF 5.08/9 10 BLZF 5.08/10 10 BLZF 5.08/11 10 BLZF 5.08/12 ZAP/TW 3 ZAP/TW 3 ZVR 160880 160882 168834 50 50 20 10 SH 2 049492 10 168811 25 ZTA 4/ZA 168811 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZGB 30 ESO 7 STR 7 161193 20 160772 240 051530 20 ZRH 1.5H /1 ZRH 1.5H /2 ZRH 1.5H /3 167881 100 167880 100 167879 100 ZRH 1.5H /1 ZRH 1.5H /2 ZRH 1.5H /3 167881 100 167880 100 167879 100 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 Cat. No. 167991 167992 167993 167994 167995 167996 167997 167998 167999 168000 168001 Qty. 100 Qty. 100 100 100 50 50 50 50 50 50 50 50 168830 168833 168831 50 50 50 ZRH 1.5N /1 163214 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 100 100 100 ZAP 6 ZAP 6 ZAP/VR 1 For insulation of mounting rails in insulated-earth installations Test adapter ZTA Version With pin Screwdriver SD to DIN 5264-A Group marking ZGB ESO Blank snap-on tag STR Transparent protective cover Reducing sleeves*** Colour ZRH for conductor 0,13...0,2 mm2 White ZRH for conductor 0,25...0,5 mm2 Grey ZRH for conductor 0,75...1 mm2 Dark grey Marking tags DEK DEK ZS 10 ZS 10 DEK ZS Print Consecutive horizontal Consecutive vertical Blank Printed ZRH 1.5N /1 163214 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 500 500 480 480 100 100 100 500 500 480 480 See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight *** Standard pack includes 100 strips for 10 poles each 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too 2/55 Pluggable Terminal blocks ZDKS ZDKB BLZF SLZF W Dimensions Width / length / height plugged in (mm) with TS 35 x 7,5 W Insulation stripping length mm Rated data Rated voltage / current / cross-section Rated insulation voltage to VDE 0110 / 2.89 / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Base terminal block Wemid Connector End plate / partition/Verriegelung ZAP ZVR ZVR Cross-connection ZQV 2.5 Test adapter ZTA Version Wemid Beige PA grun PA Screwdriver SD to DIN 5264-A Group marking ZGB ESO Blank snap-on tag STR Transparent protective cover Reducing sleeves*** Colour ZRH for conductor 0,13...0,2 mm2 White ZRH for conductor 0,25...0,5 mm2 Grey ZRH for conductor 0,75...1 mm2 Dark grey Marking tags Print DEK Consecutive horizontal DEK Consecutive vertical ZS 10 Blank ZS 10 Printed DEK ZS See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight *** Standard pack includes 100 strips for 10 poles each 2/56 BLZF 5/79/49 7 ZDKB 5/79/62 8 SLZF 5/79/49 7 250 V/16 A/2,5 mm2 4 kV/3 250 V/16 A/1,5 mm2 4 kV/3 250 V/16 A/2,5 mm2 4 kV/3 250 V/16 A/1,5 mm2 4 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 16 16 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,5 0,13...2,5 16 16 0,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,13...2,5 A2 A1 * * A2 A1 * * Type ZDKS Cat. No. 169961 Qty. 100 Type ZDKB Cat. No. 169960 Qty. 100 BLZF 5.08/2 BLZF 5.08/3 BLZF 5.08/4 BLZF 5.08/5 BLZF 5.08/6 BLZF 5.08/7 BLZF 5.08/8 BLZF 5.08/9 BLZF 5.08/10 BLZF 5.08/11 BLZF 5.08/12 167991 167992 167993 167994 167995 167996 167997 167998 167999 168000 168001 100 100 100 50 50 50 50 50 50 50 50 SLZF 5,08/2 SLZF 5,08/3 SLZF 5,08/4 SLZF 5,08/5 SLZF 5,08/6 SLZF 5,08/7 SLZF 5,08/8 SLZF 5,08/9 SLZF 5,08/10 SLZF 5,08/11 SLZF 5,08/12 167945 167946 167947 167948 167949 167950 167951 167952 167953 167954 167955 100 100 100 50 50 50 50 50 50 50 50 ZAP/ZDKB/ZDKS ZVR2 ZDKS 2.5/1.5 169962 169964 20 20 ZAP/ZDKB/ZDKS 169962 20 ZVR1 ZDKS 2.5/1.5 169963 20 169380 169381 169382 169383 169384 169385 169386 169387 169388 169389 60 60 60 20 20 20 20 20 20 5 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV Version With pin W ZDKS 5/79/62 8 2.5N/2 2.5N/3 2.5N/4 2.5N/5 2.5N/6 2.5N/7 2.5N/8 2.5N/9 2.5N/10 2.5N/50 169380 169381 169382 169383 169384 169385 169386 169387 169388 169389 60 60 60 20 20 20 20 20 20 5 ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZQV ZTA 4/ZA 168811 25 ZTA 4/ZA 168811 25 SD 0,6 x 3,5 902423 1 SD 0,6 x 3,5 902423 1 ZGB 30 ESO 7 STR 7 ZDKS ZRH 1.5H /1 20 240 20 100 ZGB 30 ESO 7 STR 7 ZDKB ZRH 1.5H /1 167881 100 161193 160772 051530 SLZF ZRH 1.5N /1 163214 20 240 20 167881 100 161193 160772 051530 BLZF ZRH 1.5N /1 163214 ZRH 1.5H /2 ZRH 1.5H /3 167880 100 167879 100 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 100 100 ZRH 1.5H /2 ZRH 1.5H /3 167880 100 167879 100 ZRH 1.5N /2 163213 ZRH 1.5N /3 163212 100 100 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 DEK 5 DEK 5 ZS 10/5 ZS 10/5 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too 2.5N/2 2.5N/3 2.5N/4 2.5N/5 2.5N/6 2.5N/7 2.5N/8 2.5N/9 2.5N/10 2.5N/50 100 ZDUB 2.5-2 Miniblocks in tension clamp technology New family of miniature block terminals incorporating the tension clamp connection system and offering four different options for mounting. l l l l 2 Fitted without a mounting rail directly onto any supporting unit by means of external screws Fitted without a mounting rail directly onto base panels by means of integrated snap-in clips Fitted onto TS15 mounting rails in accordance with DIN EN 50 045 Option for fitting onto TS15 and TS 35 mounting rails by retrofitting a snap-on foot to direct-mounting versions With this family of miniature block terminals it is possible to form individual blocks of 2 and 4-connection units as well as to combine the TS15 version with directly mounted intermediate terminals. The same applies also to the snap-in clip version if not all terminals require separate attachment. By assigning different colours to individual groups of connections, a clear division can be made between different circuits. ZDUB 2.5-2 Direct mounting ZDUB 2.5-2 Snap-in clips ZDUB 2.5-2 TS15 With an overall width of either 5 mm (2 connections) or 10 mm (4 connections), the TOP connection system guarantees absolute clarity when the blocks are wired up. Even in terminal boxes where space is limited, the wiring remains neat and comprehensible. With three options for marking, each individual block terminal can be identified quickly and unambiguously. ZDUB 2.5-2 TS15 / TS35 All block terminals are made from highquality Weidmuller WEMID insulating material which conforms to the UL94 V0 flammability rating. Summary of advantages l l l l l Four different mounting options Two versions 5 mm width with 2 connections 10 mm width with 4 connections Space-saving creation of individual blocks by combining 2 and 4-connection versions TOP connection system guarantees clarity after terminals have been wired up UL94 V0 flammability rating Rated data IEC 947-7-1 Rated voltage Rated current Rated cross-section Drilling plan (Dimensions in mm) 800 V 24 A 2,5 mm2 L = (X terminals x 5,15) + (X terminals x 10,25) L1 = L + 11,0 L2 = L + 17,0 Fixing screw M 3 2/57 Miniblocks ZDUB 2.5-2/2AN ZDUB 2.5-2/4AN ZDUB 2.5-2/2AN ZDUB 2.5-2/4AN Direct mounting Direct mounting Snap-in clips Snap-in clips 5 mm 2) Dimensions Width / length / height (mm) with TS 15 W Insulation stripping length mm Rated data IEC 947-7-1 Rated voltage / current / cross-section Rated insulation voltage to the neighbor terminals Rated impulse voltage / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size 5/33/24 10 10/33/24 10 5/33/24 10 10/33/24 10 800 V/24 A/2,5 mm2 800 V/24 A/2,5 mm2 800 V/24 A/2,5 mm2 800 V/24 A/2,5 mm2 8 kV/3 8 kV/3 8 kV/3 8 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) A2 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,13...2,5 Qty. 100 100 100 100 -* -* Type 2AN/RC 2AN/RC BL 2AN/RC OR 2AN/RC GE Cat. No. 171282 171283 171284 171285 2AN/2/RC 2AN/3/RC 2AN/4/RC 2AN/5/RC 2AN/6/RC 2AN/7/RC 2AN/8/RC 2AN/9/RC 2AN/10/RC 2AN/11/RC 2AN/12/RC 171286 171287 171288 171289 171290 171291 171292 171293 171294 171295 171296 50 50 20 20 20 20 10 10 10 10 10 4AN/2/RC 4AN/3/RC 4AN/4/RC 4AN/5/RC 4AN/6/RC 4AN/7/RC 4AN/8/RC 4AN/9/RC 4AN/10/RC 4AN/11/RC 4AN/12/RC 171301 171302 171303 171304 171305 171306 171307 171308 171309 171310 171311 50 50 20 20 20 20 10 10 10 10 10 ZAP ZDUB 170475 ZAP ZDUB BL 170476 ZAP ZDUB OR 170477 50 50 50 ZAP ZDUB 170475 ZAP ZDUB BL 170476 ZAP ZDUB OR 170477 50 50 50 ZTW ZDUB 50 ZTW ZDUB 170434 50 ZQB 2.5 167712 50 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 A2 0,13...2,5 UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Centreterminals ZDUB 2.5-2/2AN and 4AN beige Wemid to be used with TS 15 or Clip versions, blue Wemid in case each individual terminal is not orange PA equiped with clip or foot yellow/green Wemid -* -* Type 2AN/DM 2AN/DM BL 2AN/DM OR 2AN/DM GE Cat. No. 170435 170436 170437 170438 Qty. 100 100 100 100 600V/20A/26...12AWG -* Type Cat. No. 4AN/DM 170454 4AN/DM BL 170455 4AN/DM OR 170456 4AN/DM GE 170457 Endterminal ZDUB 2.5-2 with flange. Necessary for customer assembly of individual No. of poles beige Wemid blue Wemid orange PA yellow/green Wemid 2AN/DB 2AN/DB BL 2AN/DB OR 2AN/DB GE 170450 170451 170452 170453 100 100 100 100 4AN/DB 4AN/DB BL 4AN/DB OR 4AN/DB GE 170469 170470 170471 170472 100 100 100 100 2 pol 3 pol 4 pol 5 pol 7-pole 8-pole 9-pole 10-pole 11-pole 12-pole 2AN/2/DB 2AN/3/DB 2AN/4/DB 2AN/5/DB 2AN/6/DB 2AN/7/DB 2AN/8/DB 2AN/9/DB 2AN/10/DB 2AN/11/DB 2AN/12/DB 170439 170440 170441 170442 170443 170444 170445 170446 170447 170448 170449 50 50 20 20 20 20 10 10 10 10 10 4AN/2/DB 4AN/3/DB 4AN/4/DB 4AN/5/DB 4AN/6/DB 4AN/7/DB 4AN/8/DB 4AN/9/DB 4AN/10/DB 4AN/11/DB 4AN/12/DB 170458 170459 170460 170461 170462 170463 170464 170465 170466 170467 170468 50 50 20 20 20 20 10 10 10 10 10 ZBB ZDUB 170474 50 ZBB ZDUB 170474 50 MOFU 15/35 ZDUB 172366 50 MOFU 15/35 ZDUB 172366 50 Multipole terminals ZDUB 2.5-2 Special versions out off 2AN and 4An as well as other colours will be supplied upon customer request. Fixing bracket Necessary for customer assembly of individual No. of poles Clip-on combifoot TS15 / TS35 for direct mounting versions End plate ZAP ZDUB = Thickness 5 mm ZAP/TW ZDUA = Thickness 1.5 mm Partition Thickness 5 mm Cross-connection ZQB 2.5 fur ZDUB-Type ZQV 2.5N fur ZDUA-Type Wemid Blue Wemid Orange Wemid Orange Wemid Marking tags DEK DEK ZS 10 ZS 10 DEK Print Consecutive horizontal Consecutive vertical Blank printed ZS See page 2/60 as well as section 3 for additional accessories * Approvals applied for ** Ferrules crimped gas-tight 2/58 ZTW ZDUB 170434 50 2-pole 3-pole 4-pole 10-pole Screwdriver SD to DIN 5264-A 5 mm 2) SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 ZTW ZDUB 170434 50 ZQB 2.5 167712 50 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 1) Crimped with Weidmuller-Crimping tool PZ 6/5 (Cat. No. 901146) 2,5 mm2 possible too A2 170434 Qty. 100 100 100 100 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 0,13...2,5 A2 600V/20A/26...12AWG -* Type Cat. No. 4AN/RC 171297 4AN/RC BL 171298 4AN/RC OR 171299 4AN/RC GE 171300 2) Mountinghole for clip o 3,5 mm Steelthickness 0,6 -1,2 m, pitch 5,1 or 10,2 Qty. 100 100 100 100 ZDUB 2.5-2/2AN ZDUB 2.5-2/4AN ZPEB 2.5-2/2AN TS 15 TS 15 TS 15 U U 10/33/32 10 800 V/24 A/2,5 mm2 800 V/24 A/2,5 mm2 8 kV/3 8 kV/3 5/33/32 10 IEC 947-7-2 - /-/2,5 mm2 800 V 8 kV/3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,13...2,5 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,13...2,5 -* -* Type 2AN/15 2AN/15 BL 2AN/15 OR A2 Cat. No. Qty. 171275 171276 171277 100 100 100 A2 600V/20A/26...12AWG -* Type Cat. No. 4AN/15 171278 4AN/15 BL 171279 4AN/15 OR 171280 ZDUA 2.5-2 ZPEA 2.5-2 TS 15 available Sep. 97 TS 15 available Sep. 97 U 5/33/32 10 0,13...2,5 New miniature terminals in tension clamp technology with modular terminal block features Qty. -* -* Type A2 Cat. No. Qty. For attaching onto TS 15 mounting rails according to DIN EN 50045. ZDUA / ZPEA enable individual blocks of feed-through and protective conductive terminals to be assembled, whereby each terminal can be removed separately. With an overall width of 5 mm, the TOP connection system guarantees absolute clarity when the blocks are wired up. The time-saving ZQV 2.5N plug-in cross-connection can also be used with this series. Electrical contact is made by the protective conductor terminals automatically when they snap onto the mounting rail. With three options for marking, each individual block terminal can be identified quickly and unambiguously. 100 100 100 2AN/15 171281 U U 5/35/30,5 10 5/35/30,5 10 IEC 947-7-2 -- V/-- A/2,5 mm2 500 V 6 kV / 3 500 V/24 A/2,5 mm2 6 kV / 3 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) 0,13...2,5 2 0,5...2,5 0,5...2,5 0,5...1,51) 0,5...1,51) A2 -* -* Type Cat. No. ZDUA 2.5-2 172092 ZDUA 2.5-2 BL 172093 ZDUA 2.5-2 OR 172094 Qty. 0,13...2,5 A2 -* -* Type Cat. No. Qty. ZPEA 2.5-2 172095 100 ZAP/TW ZDUA 172096 ZAP/TW ZDUA BL172096 ZAP/TW ZDUA OR172096 50 50 50 100 100 100 100 Summary of advantages: * For mounting onto TS15 rails according to DIN EN 50045 * Plug-in cross-connections 2AN/2/15 2AN/3/15 2AN/4/15 2AN/5/15 2AN/6/15 2AN/7/15 2AN/8/15 2AN/9/15 2AN/10/15 2AN/11/15 2AN/12/15 171433 171434 171435 171436 171437 171438 171439 171440 171441 171442 171443 50 50 20 20 20 20 10 10 10 10 10 4AN/2/15 4AN/3/15 4AN/4/15 4AN/5/15 4AN/6/15 4AN/7/15 4AN/8/15 4AN/9/15 4AN/10/15 4AN/11/15 4AN/12/15 171444 171445 171446 171447 171448 171449 171450 171451 171452 171453 171454 50 50 20 20 20 20 10 10 10 10 10 ZAP ZDUB 170475 ZAP ZDUB BL 170476 ZAP ZDUB OR 170477 50 50 50 ZAP ZDUB 170475 ZAP ZDUB BL 170476 ZAP ZDUB OR 170477 50 50 50 ZAP ZDUB 170475 ZAP ZDUB BL 170476 ZAP ZDUB OR 170477 50 50 50 ZTW ZDUB 50 ZTW ZDUB 170434 50 ZTW ZDUB 50 ZQB 2.5 167712 50 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 170434 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 * Mere 5 mm overall width * TOP connection system * UL94 V0 flammability rating 170434 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 ZAP/TW ZDUA 172096 ZAP/TW ZDUA BL172096 ZAP/TW ZDUA OR172096 50 50 50 ZQV ZQV ZQV ZQV 2.5N/2 2.5N/3 2.5N/4 2.5N/10 169380 169381 169382 169388 60 60 60 20 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 2/59 Accessories for the Z series ZZA 2.5 ZBW ZST ZQB 2.5 Additional terminal for: ZDU 2.5, ZDU 2.5/3 AN, ZDU 2.5/4 AN, ZTR 2.5 und ZTR 2.5/3 AN Actuating tools Bus Support Cross-connection bridge Foto noch nicht vorhanden ZBWW ZBW 1...6 Dimensions Width / length / height mm Insulation stripping length mm Rated data Rated voltage / current / cross-section Rated insulation voltage to VDE 0110 / 2.89 / pollution severity Further technical data Clampable conductor: solid H07V-U mm2 flexible H07V-K mm2 with ferrule to DIN 46 228/1** mm2 with ferrule with plastic insulating collar** mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size Ordering data Version Wemid 6/21/61 10 10/61/27,5 2,5/8,6/23 400 V/17,5 A/2,5 mm2 6 kV/3 500V/24A 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 Type ZZA 2.5 Cat. No. Qty. 164669 50 Type ZBW 1 ZBW 2 ZBW 3 ZBW 4 ZBW 6 ZBW W Cat. No. Qty. 166962 1 165067 1 165068 1 165069 1 165070 1 166963 1 Type ZST Cat. No. Qty. 167868 50 Fitting the ZZA 2.5 Type ZQB Cat. No. Qty. 167712 50 Fitting the ZQB 2.5 Place the locating hook in the screwdriver guide of the contact part in the cross connection channel and subsequently press into place. A 6 mm pitch in provided so that each second terminal can be used. The ZBW 1 - 6 and ZBW W can be used for actuating the 1.5 mm2 and 2.5 mm2 terminal clamping units. The ZBW W additionally offers easier access in confined spaces. The plastic actuating tools increase safety when working on energised systems. The bus support ZST is used to park test plugs, cross-connections and fuse links which are used by service Engineers. The bus support can be locked at the end of a terminal strip on TS 35 mounting rail. The cross-connection bridge ZQB 2.5 extends the crossconnection units ZQV 2.5 / ... for the terminals ZDU 2.5 / 3AN and ZDU 2.5 / 4AN. The clamping units are opened with the operation tool ZBW 2, Cat. no.: 165067. Using the ZQB as shown in the drawing, the following rated data can be obtained: Rated voltage: Rated current: ZQV 2.5 / 10 ZDU 2.5 / 4AN Marking tags DEK DEK ZS 10 ZS 10 DEK 2/60 Print Consecutive horizontal Consecutive vertical Blank Printed ZS DEK 5 DEK 5 ZS 10/5 ZS 10/5 047346 047356 161000 161001 500 500 480 480 500 V 24 A ZQV 2.5 / 3 ZQB 2.5 SFEH ZDUS ZQV 2.5/50 Pin header Screening connection terminal block Cross-connection 4,8/83,5/33,5 125 V 2 Type Cat. No. Qty. SFEH 0.8x1.6/3 168483 20 SFEH 0.8x1.6/2 168482 20 SFEH 1x1 / 3 168481 20 SFEH 1x1 / 2 168480 20 SFEH 0.8x2.4/3 168485 20 SFEH 0.8x2.4/2 168484 20 Type ZDUS Cat. No. Qty. 167664 50 The pin headers SFEH 2and 3 poles are developed for Termi-Point(R) and Wirewrap(R) connections within the ZDU 2.5 variants. The rated voltage of the pin headers is 125 V. Max. 3 connections can be connected to each pin. The pin headers are placed in the clamping unit with the tools ZBW 2 (2 poles), or ZBW 3 (3 poles). The Screen conductor from shielded control lines can be soldered to the current bar of the Screening connection terminal block ZDUS or connected with crimped 2.8 x 0.8 mm push on receptacle. The Screening connection terminal block ZDUS can be assembled to the ZDU 2.5, ZDU 2.5 / 3 AN, ZDU 4, ZDU 6 and ZTR 2.5. Type ZQV 2.5/50 ZQV 2.5N/50 Cat. No. Qty. 169754 20 169389 5 Made-to-measure cross-connections The ZQV 2.5/50 is a crossconnection with which up to 32 terminals can be quickly and easily interconnected. The 50 pole cross-connection comb can be easily cut by the fitter to the required number of poles. Using this system, you will be able to reduce storage requirements but still have a crossconnection with the correct number of poles available. Left-overs occur infrequently due to the high number of poles (50). The ends of the endless cross-connections are blank. An end plate must be inserted between neighbouring ZQVs with blank edges. For ZDU 2.5 and WDU 2.5 it is sufficient to stagger the ZQVs. The rated voltage is 400 V. Generally, the ZQV 2.5/50 can be used with up to 32 poles. Termi-Point(R)= registered trademark of the company AMP Wire-wrap(R)= registered trademark of the company Gardener Denver 2/61 Initiator terminals/Actuator terminals ZIK*ZAK System advantages For process control automation in machinery and plants, initiators (such as triggering switches) and actuators (such as magnetic valves) are important components. To reduce the amount of wiring needed they are grouped and wired together on the machine. The limited space available often makes it difficult to install terminal enclosures. In such situations, it is necessary to use the smallest possible components since little room is provided for wiring and mounting of the enclosure. However, no compromises are acceptable in terms of ease of installation, accessibility and clarity of the wiring. The new ZIK ZAK initiator/actuator terminal from our Z-Series, fulfills the demands for compactness and intraconnection by employing a novel modular construction. 2/62 Modular distributor Systems The terminal needed to connect the initiator/actuator consists of a base element and clip-on distribution elements. The base element contains only the connectors for the signal line. The +/- supply and ground could be linked within the enclosure. Marking systems The use of coloured insulators (reddishbrown, blue and green/yellow) generally makes identification easy. The two marking channels for the connectors and signal are angled to improve legibility. Modular distribution strip A cross-connection has already been integrated with a male connector on one side and a female connector on the opposite side. Joining the elements together automatically links up the cross-connection for power distribution. There is no need for additional cross-connectors. There is no time spent attaching cross-connectors and, of course, no errors can be made with cross-connection. The user can determine the number of poles for cross-connection. Easy to modify Once joined together the distribution strip simply clips onto the base element. There are no tools necessary. Should you want to remove a distribution strip you can simply pry it off with a cheese-head screw driver. Connection of actuators Ground (PE) can be connected with a PE element or using a standard PE terminal (such as the ZPE 22.5). The PE base element has the proven PE foot from the ZPE 2.5 and contacts automatically with the ZVL 1.5 PE distributor strip when mounted. The contact takes place between the female contact of the first distributor element and the male contact in the PE foot of the PE base element. Pluggable cross-connection system If you do need to cross-connect a signal line you can use the familiar ZQV/2.5 from Z-Series. 2 Not much space required The TOP-connection also ensures easy access and easy- to-locate wiring. Wiring up the connector is easier and more reliable since wiring errors are quickly recognised. The strain on the wiring is lower with a TOP-connection. The combination with tension clamp technology improves user-friendliness. This is the innermost ratchet of both the 3-way and 4-way variants. If you use a standard PE terminal, this will have to be connected to the ZVL 1.5 PE distributor element with a suitable wire. The n+1 rule for the number of distributor elements also applies here. In other words, just 1 PE element per series (n) of base elements. Because of the design, the PE element should always be to the left of the block. A welcome feature of this type of connector is the ability to use extremely narrow ducting and narrow flat enclosures. Distance to body of terminal: a = 6 mm b = 11.5 mm for 40 mm height = 20.2 mm for 60 mm height a Connection of initiators No further terminal variations are required for power supply since this ensues simply by adding additional base elements that have built-in cross-connection. b h An example: If you wanted to connect 9 initiators, you would simply need 10 3-way or 4-way base elements, 10 brown ZVL 1.5 BR distributor elements and 10 blue ZVL 1.5 BL (-) distributor elements. The extra element is the feed. The number of distributor elements is therefore n + 1, where n is the number of initiator / actuators being connected. 2/63 ZIK*ZAK Modular distribution system Dimensions Width / length / height (mm)Terminal base with TS 35 x 7,5 W Width / length / height (mm) Distribution Insulation stripping length/clamping screw/screwdriver blade VDE rated data, 0611 Part 1/8.92/IEC 947-7-1/1989 Rated voltage / current / cross-section Rated voltage / current / cross-section (mit LED) Rated impulse voltage / pollution severity Further technical data Tightening torque Nm Torque level with electric screwdriver type DMS2 Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K und AEH DIN 46 228/1 mm2 Max. Clamping Range in mm2/Gauge pin to IEC 947-1/1988 Size UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Terminal base 3-way Terminal base 3-way 10 poles Terminal base 3-way with LED for PNP and NPN* PE-Terminal base 3-way Terminal base 3-way Terminal base 4-way 5,08/68/45,8 5,08/81/45,8 8 mm/-/3,5 x 0,6 8 mm/-/3,5 x 0,6 5/12,9/17,5 8 mm/-/3,5 x 0,6 250 V/17,5 A/1,5 mm2 5...30 V/17,5 A/1,5 mm2 4 kV/3 250 V/17,5 A/1,5 mm2 5...30 V/17,5 A/1,5 mm2 4 kV/3 250 V/17,5 A/1,5 mm2 5...30 V/17,5 A/1,5 mm2 4 kV/3 250 V/17,5 A/1,5 mm2 0,13...2,5 0,13...2,5 0,13...2,5 0,13...2,5 0,5...2,5 0,5...1,5 0,5...2,5 0,5...1,5 0,5...2,5 0,5...1,5 0,5...2,5 0,5...1,5 4-way type: End plate Width / length / height (mm) 3.8/68/38 3.8/81/38 Cross-connection for signal level ZQV 4 kV/3 A1 A1 A1 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG Type Cat. No. Qty. ZIA 1.5/3 L-1 S 165198 100 ZIA 1.5/3 L-1S/10 169261 10 ZIA 1.5/3 L 1 S/LD165199 50 ZIA 1.5/3 L-PE 165200 20 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG Type Cat. No. Qty. 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG Type Cat. No. Qty. 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG Type Cat. No. Qty. These terminal blocks are assembled with distributions blocks ZVL 1.5 and an endplate. The power supply is done with an integrated terminal base for the Initiator versionor with an integrated PE-terminal base for the Actuator version or Initiator version with PEversion. ZIA 1.5/4 L-1 S 165201 100 ZIA 1.5/4 L-1 S/10 169262 5 ZIA 1.5/4 L 1 S/LD 165202 50 ZIA 1.5/4 L-PE 165203 20 ZVL ZVL ZVL ZVL 1.5 1.5 BR 1.5 BL 1.5 PE 164930 165037 165036 165197 100** 100** 100** 100** 3-way 4-way 2 poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 10 poles 50 poles Print Consecutive horizontal Consecutive vertical ZIA 1.5/3L-1S/8/KB 169263 ZIA 1.5/3 L-PE/8/KB169265 ZIA 1.5/3L-1S/16/KB169264 ZIA 1.5/3 L-PE/16/KB169266 ZIA 1.5/4 L-PE/8/KB169267 ZIA 1.5/3 L-PE/16/KB169268 ZAP/TW ZIA 1.5/3 L164954 5 5 2 2 5 2 50 ZAP/TW ZIA 1.5/4 L164955 50 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 Cat. No. Qty. 160886 60 160887 60 160888 60 160889 20 160890 20 160891 20 160892 20 160893 20 160894 20 169754 20 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 Cat. No. Qty. 160886 60 160887 60 160888 60 160889 20 160890 20 160891 20 160892 20 160893 20 160894 20 169754 20 SD 0,6 x 3,5 902423 SD 0,6 x 3,5 902423 DEK 5 DEK 5 047346 500 047356 500 DEK 5 DEK 5 047346 500 047356 500 1 See page 2/60 as well as section 3 for additional accessories *) Note the polarity **) Pre-assembled as 20 pole-units 2/64 8 mm/-/3,5 x 0,6 for 8 Initiators for 8 Actuators for 16 Initiators for 16 Actuators for 8 Initiators with PE for 16 Initiators with PE Screwdriver SD to DIN 5264 A Marking tags Block versions A1 Terminal base 4-way Terminal base 4-way 10 poles Terminal base 4-way with LED for PNP and NPN* PE-Terminal base 4-way Wemid brown Wemid blue Wemid green / yellow Wemid 3-way type: Distribution strip 1 SD 0,6 x 3,5 902423 1 DEK 5 DEK 5 047346 500 047356 500 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/50 Cat. No. Qty. 160886 60 160887 60 160888 60 160889 20 160890 20 160891 20 160892 20 160893 20 160894 20 169754 20 SD 0,6 x 3,5 902423 DEK 5 DEK 5 047346 500 047356 500 1 ZIK*ZAK Configuration examples 3-way Initiator 3-way Actuator 3-way Initiator with PE Type Cat. No. Qty. Terminal base 3-way ZIA 1.5/3 L-1 S 165198 100 2 alternatively alternatively Terminal base 3-way with LED ZIA 1.5/3 L165199 50 1 S/LD for PNP and NPN Terminal base 4-way ZIA 1.5/4 L-1 S 165201 100 alternatively alternatively alternatively as required as required + + Terminal base 4-way with LED ZIA 1.5/4 L165202 50 1 S/LD for PNP and NPN as required Terminal base 3-way ZIA 1.5/3 L-PE 165200 PE-Terminal base 4-way ZIA 1.5/4 L-PE 165203 20 20 + End plate 3-way ZAP/TW 164954 ZIA 1.5/3 L + 50 + End plate 4-way ZAP/TW 164955 ZIA 1.5/4 L Distribution strip ZVL 1.5 BR 165037 Distribution strip ZVL 1.5 BL 165036 Distribution strip ZVL 1.5 PE 165197 50 + + + + + 100 + + + + + + = = = 100 100 = = ZIK*ZAK configuration 2/65 ZPV 1.5 - potential distribution * ZPV 1.5 is modular. You determine the number of poles you need on-site. * Cross-connections are built in. * Rearrange the block whenever you need - in seconds. * Ultra-compact TOP connection thanks to tension-clamp. This permits easy wiring, even in tight spaces. * And, there's room in even the smallest enclosure thanks to the overall compactness of the ZPV. Easy to put together - and split apart Simply snap off the number of poles you need - by hand or using a screw driver. Assembly errors can be rectified in seconds. Built-in cross-connection eliminates bridging. Familiar installation Each element contains built-in cross connection, on one side the male connector, on the other the female. Marker carrier The ZPV 1.5 base elements (also supplied in strips of 20) snap easily onto a regular TS 35 rail. Each base element can take 4 parallel distributor elements. Like the entire ZIK*ZAK series, the elements simply snap onto the ZPV 1.5. The individual rows of distributor elements are electrically separate from each other. To separate within a row of distributor elements we recommend our BZT 1.5 marker plates. Flexible assembly Disassembling and reassembling the blocks is simply a matter of prising off the units. It's a snap with ZPV 1.5. Pure identification Base element fits on standard TS 35 rail End plate, also used to mark banks of distribution elements 2/66 And once you've decided on the layout of your block you'll discover that marking is just as easy. Matrix-like marking provides easy recognition. The BZT 1.5 ZA is a marker with lugs to link to the next distributor element. The BZT 1.5 o. ZA, on the other hand, has no lugs for individual mounting / dismounting of sections of the distribution row. Both markers are effective electrical separators. BZT 1.5 ZA with lugs BZT 1.5 o. ZA without lugs ZPV 1.5 Variable-pole potential distributors with built-in cross-connection Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated data VDE 0611 Part 1/8.92 / IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Clampable conductor solid H07V-U flexible H07V-K flexible H07V-K and ferrules acc. DIN 46 228/1 flexible H07V-K and ferrules with plastic insul. collar Clampability of two conductors 2 x flexible H05V-K 0,75 with twin ferrules (Cat. No. 901851) and PZ4 Crimper (Cat. No. 901250) oder PZ 6/5 Crimper (Cat. No. 901146) Insulation stripping length = 11 0,5 mm ZVL 1.5 5,08/68 /38 -/-/- 5,08/12.9/17.5 8/-/- 250 V/17,5 A/1,5 mm2 4 kV/3 250 V/17,5 A/1,5 mm2 4 kV/3 mm2 mm2 mm2 0,13 ... 2,5 0,5 ... 2,5 0,5 ... 2,5 mm2 0,5 ... 1,5 mm2 0,5 ... 1,5 mm2 0,75 Gauge pin to 947-1/1988 size Continuous current rating of terminal block for conductor size UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data ZPV 1.5 Type Wemid Blue Wemid Brown Wemid Green Wemid End plate / partition Wemid Width / length / height (mm) 2 24 A / 2,5 mm2 A1 24 A / 2,5 mm2 300 V / 10 A / 26...14 AWG 300 V / 10 A / 26...14 AWG 300 V / 10 A / 26...14 AWG 300 V / 10 A / 26...14 AWG W Cat. No. Qty. 167663 100 Type Cat. No. ZAP/TW ZPV1,5 167465 5,08/68/38 Qty. 50 W Cat. No. 164930 165036 165037 169782 Type Cat. No. ZAP/TW ZPV 1,5 167465 5,08 / 68 / 38 Qty. 100* 100* 100* 100* Qty. 50 Marker carriers BZT ZVL 1,5 o.ZA 167662 BZT ZVL 1,5 ZA 167661 BZT ZVL1,5 ZA 100 100 BZT ZVL1,5 o.ZA Screwdriver SD 0,6x3,5x100 902423 Marking tags for base element ZPV marker carriers BZT ZVL 1,5 and for end plate ZAP/TW ZPV 1,5 1 ZGB15 ZGB30 ZS10/5 DEK 5 WS 8/5 WS 10/5 WS 12/5 *) pre-assembled in 20-pole strips 2/67 SAI distributor family SAI module family The SAI module joins sensor/actuator cables in the simplest and most rational method. The almost standardised circular connectors allow components to be installed by simply plugging them together. If an initiator fails, a replacement can therefore be easily installed due to easy access. This can be performed on-the-spot by production personnel. The clearly visible, standard status displays are another advantage. The SAI module is also available with screw connections. Downtimes are thus reduced to a minimum and costs are kept low. SAI-K SAI-S Screw connection for bus line 12-pole plug connector for bus line Dimensions and catalogue numbers Dimensions and catalogue numbers Type SAI-4-K Cat. No. 945603 Type SAI-4-S Cat. No. 945600 Type SAI-6-K Cat. No. 945604 Type SAI-6-S Cat. No. 945601 Type SAI-8-K Cat. No. 945606 Type SAI-8-S Cat. No. 945602 2/68 Pin layout SAI-4... SAI-6... SAI-8... SAI module family Technical data Protection class Miniature circular connectors Material Housing Temperature range Contact pins/sockets IP67 DIN 40050 (plugged and screwed) PBT not strengthend V0 according to UL 94 - 20 to + 55 C CuZn, gal. NiAu Plug cycles Withdraw strength per contact 50 times 0.4 N Nominal voltage Nominal current 10 - 30 V DC 2 A / 8 A total LEDs Green = operation display Yellow = function display Designation Cat. No. SAIS-5/7 (straight) 945694 Connector (M 12) with screw connection, 5-pole Qty. 5 Designation Cat. No. SAISW-5/7 (angled) 945695 Connector (M 12) with screw connection, 5-pole Qty. 5 Accessories : Designation Protection cap : SAI - SK Marker : ESG 9/20 MC blank Cat. No. 945605 160994 Qty. 30 200 Standard connection cables for sensors Connector shape: M 12 to M 12 / Straight connector Cable type : PUR in lengths of 0.6 m, 0.9 m, 1.2 m, 1.5 m, 2.0 m The cables are suitable for normally-open relays or for normallyclosed relays by jumpering PIN 2 and 4. Designation Cat.No. Qty. SAIL-M12G-M12G-2/4-0.6U 945696 10 SAIL-M12G-M12G-2/4-0.9U 945697 10 SAIL-M12G-M12G-2/4-1.2U 945698 10 SAIL-M12G-M12G-2/4-1.5U 945699 10 SAIL-M12G-M12G-2/4-2.0U 945700 10 * Detailed data sheet for the new type SAI-M availible on request. 2/69 Feed-through terminals for initiators and actuators DLI 2.5 DLI 2.5 LD W Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Standard With diode 1N4007 With LED rot (5...30 V) With LED grun (5...30 V) With LED and Diode 1N4007 With LED and Diode 1N4007 Block of 101) Block of 101) Fuse inserts End plate/partition DLI 2.5 LD PNP W DLD 2.5 NPN W W 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/82/49 7 mm/M 2,5/3,5 x 0,6 250 V/20 A/2,5 mm2 4 kV/3 5-30 V-/20 A/2,5 mm2 0,8 kV/3 5-30 V-/20 A/2,5 mm2 0,8 kV/3 250 V/24 A/2,5 mm2 4 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...10) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...10) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...10) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 131336 100 300 V/10 A/26...12 AWG - W Cat. No. Qty. 300 V/10 A/26...12 AWG - W Best.-Nr . Qty. 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 131706 50 100 100 (LED red) (LED green) 157853 157854 10 10 157855 157856 100 100 (w/o dekafix) (with dekafix) 141136 157907 Type AP Cat. No. Qty. 131326 20 Type AP Cat. No. Qty. 131326 20 Type AP Cat. No. Qty. 131326 20 TSch 1 031916 100 TSch 1 031916 TSch 1 031916 StB 8.5* (o 2,3) 021570 PS 2.3 018040 50 20 Q2 Q3 131250 131260 50 50 Q2 Q3 131250 131260 50 50 Q2 Q3 131250 131260 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 QL 2 VH 3.8 029720 134580 100 100 QL 2 VH 3.8 029720 134580 100 100 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 ADP HP 4 048540 048586 - 20 Print Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 - - AP-DLI AP-DLD (thickness 1.5 mm) Test plug/socket PS 2.3 StB 8.5 10 10 157851 157852 (Q 2...10) 20 100 100 Type AP AP (part-AP) TSch 1 Cat. No. Qty. 131766 20 138186 20 031916 100 Teil-AP TSch 1 StB 8.5* (o 2,3) 021570 PS 2.3 018040 50 20 50 50 Q2 Q3 131250 131260 50 50 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 QL 2 VH 3.8 029720 134580 100 100 QL 2 VH 3.8 029720 134580 100 100 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 ADP HP 4 048540 048586 - 20 ADP HP 4 048540 048586 - 20 ADP HP 4 048540 048586 - 20 FW 6 FS 6 046866 046876 - - FW 6 FS 6 046866 046876 - - FW 6 FS 6 046866 046876 - - Cross-connection Q3 For cross-connections for more than 20 terminal blocks, replace VH with VH 3.8 (134580) without internal thread Group marking WT 4 Cover HP 4 Marking tags 1) DLI 2.5/35/10 = Block of 10 with built-in cross-connections * Only in upper busbar 2/70 DLA 2.5 DLA 2.5/D W DLA 2.5/LD W DLA 2.5/LD/D W DLD 2.5/PE W KDKS 1 / PE W W 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/65/49 7 mm/M 2,5/3,5 x 0,6 6/74,5/49 7 mm/M 2,5/3,5 x 0,6 8/91/65 9 mm/M 3/M 2.5***/3,5 x 0,6 250 V**/17,5 A/2,5 mm2 4 kV/3 250 V**/17,5 A/2,5 mm2 4 kV/3 5-30 V/17,5 A/2,5 mm2 0,8 kV/3 5-30 V/17,5 A/2,5 mm2 0,8 kV/3 250 V**/17,5 A/2,5 mm2 4 kV/3 500 V / 6,3 A / 4 mm2 6 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...20) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...20) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...20) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...20) 20 0,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 20 A/2,5 mm2 (Q 2...20) 20 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 156597 100 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 300 V/10 A/26...12 AWG 5-30 V/10 A/26...12 AWG W Cat. No. Qty. 300 V/10 A/26...12 AWG 5-30 V/10 A/26...12 AWG W Cat. No. Qty. 300 V/10 A/26...12 AWG - W Cat. No.Qty. 159595 100 157840 0,5...1 / 0,4...0,7*** 2/1*** 0,5...4 0,5...4 / 2.5*** 0,5...4 / 2.5*** A 4 / A 3*** 100 157843 157844 100 100 (LED (LED (LED (LED 10 10 red) green) red) green) 157847 157848 157849 157850 100 100 10 10 (w/o dekafix) (with dekafix) 157838 157839 Type AP Cat. No. Qty. 131326 20 Type AP Cat. No. Qty. 131326 20 Type AP Cat. No. Qty. 131326 20 Type AP Cat. No. Qty. 131326 20 TSch 1 031916 100 TSch 1 031916 TSch 1 031916 TSch 1 031916 StB 8.5* (o 2,3) 021570 PS 2.3 018040 50 20 Q2 Q3 131250 131260 50 50 Q2 Q3 131250 131260 50 50 Q2 Q3 131250 131260 50 50 Q2 Q3 131250 131260 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 QL 2 VH 3.8 029720 134580 100 100 QL 2 VH 3.8 029720 134580 100 100 QL 2 VH 3.8 029720 134580 100 100 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 ADP HP 4 048540 048586 - 20 ADP HP 4 048540 048586 - 20 FW 6 FS 6 046866 046876 - - FW 6 FS 6 046866 046876 - - 100 100 Cat. No.Qty. 952811 50 cannot be combined with DLI / DLA W 100 Type AP AP (part-AP) TSch 1 Cat. No. Qty. 159596 20 159597 031916 100 5 x 20 without indicator Type Cat. No. Qty. AP 950333 50 StB 8.5* (o 2,3) 021570 PS 2.3 018040 50 20 50 50 Q2 Q3 131250 131260 50 50 QB 2 QB 3 046110 046120 50 50 131270 131310 139980 50 20 20 Q4 Q 10 Q 20 131270 131310 139980 50 20 20 QB 4 046130 50 QL 2 VH 3.8 029720 134580 100 100 QL 2 VH 3.8 029720 134580 100 100 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 WT 4 SF 10 SG 10 134106 100 033240 1000 033250 1000 ADP HP 4 048540 048586 - 20 ADP HP 4 048540 048586 - 20 ADP HP 4 048540 048586 - 20 FW 6 FS 6 046866 046876 - - FW 6 FS 6 046866 046876 - - FW 6 FS 6 046866 046876 - - FW 8 FS 8 127696 128966 - - *** for PE connection ** If the cross-connection runs via the PE connection of the DLA, or if a pole is generally skipped, the nominal voltage is reduced to 30 Vac 2/71 Feed-through terminals for initiators and motors VLI 1.5 VLI 1.5PE W MAK 2.5 W W Dimensions Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade 6/79/64 8 mm/M 2,5/3,5 x 0,6 6/69/63 8 mm/M 2,5/3,5 x 0,6 6/88/64 8 mm/M 2,5/3,5 x 0,6 VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section 250 V/17,5 A/1,5 mm2 250 V/17,5 A/1,5 mm2 4 kV/3 4 kV/3 400 V (L-L) / 250 V (L-PE) / 24 A/2,5 mm2 6 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...4,0 0,5...4,0 0,5...2,5 0,5...2,5 0,5...2,5 A3 24 A/2,5 mm2 0,5...4,0 0,5...4,0 0,5...2,5 0,5...2,5 0,5...2,5 A3 24 A/2,5 mm2 0,5...4,0 0,5...4,0 1,5...2,5 0,5...2,5 0,5...2,5 A3 24 A/2,5 mm2 Continuous current rating of cross-connection, multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version PA 24 24 24 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 163325 50 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG W Cat. No. Qty. 163331 50 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG W Cat. No. Qty. 161527 50 163165 50 End plate / partition End plate Partial end plate for VLI 1.5 - MAK 2.5 combination Partial end plate for VLI 1.5 - VLI 1.5 PE combination Partial end plate for VLI 1.5 PE - MAK 2.5 combination Cross-connection VQB 50-pole, snap-fit, external cross-connection Type Cat. No. Qty. AP VLI1.5 163326 20 TEAP 2 MAK2.5163333 20 TEAP VLI1.5 163327 20 Type AP VLI1.5/PE Type Cat. No. Qty. AP MAK2.5 161528 20 TEAP 2 MAK2.5163333 20 Rated impulse voltage / pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 flexible H07V-K and AEH with plastic collar Plug gauge according to 947-1 Continuous current of terminal block for conductor size Nm mm2 mm2 mm2 mm2 mm2 Size VQB1.5/50BL 163328 VQB1.5/50RT 163329 VQB1.5/50SW 163512 5 5 5 Cat. No. Qty. 163332 20 TEAP VLI1.5 163327 TEAP 1 MAK2.5163334 20 20 VQB1.5/50BL 163328 VQB1.5/50RT 163329 VQB1.5/50SW 163512 5 5 5 QB 25-pole, external cross-connection TEAP 1 MAK2.5163334 20 VQB1.5/50BL* VQB1.5/50RT* VQB1.5/50SW* QB 25 SW* QB 25 RT* QB 25 BL* 163328 163329 163512 052000 052006 052008 5 5 5 20 20 20 Group marking Tag carrier for S 10 tags Marking tags Print Consecutive horizontal Consecutive vertical T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 T5 SF 10 SG 10 034850 100 033240 1000 033250 1000 FW 5 FS 5 047346 047356 FW 5 FS 5 047346 047356 FW 5 FS 5 047346 047356 For further accessories see section 3, further marking material see section 8 * When using cross-connection bridges, the connection cross-section is reduced by one level 2/72 - - - - - - System advantages SAK/AKZ series Stripping length The required stripping length for all Weidmuller products is specified in mm. These lengths must be observed so that the creepage and clearance paths are not reduced due to improper connection. Mounting Mounting is carried out on TS 32 mounting rails according to EN 50 035 or TS 15 according to EN 50 045. End plate The last terminal of a mounted terminal row must be closed with an end plate. The end plate is held in place by the end bracket. Partition Depending on the operating voltage, a partition must be placed between neighbouring cross-connection groups. This is necessary to maintain the necessary creepage and clearance paths. Small partition After assembly, small partitions can be inserted between cross-connections or sockets for terminal blocks with a max. width of 12 mm. Cover plates Several VDE regulations require that the supply connection terminals are labelled. For this purpose, Weidmuller provides a range of cover plates printed with a warning arrow and the international danger symbol. A warning arrow is printed on the reverse side with the words Danger Voltage. The cover plates are attached to the terminals blocks with plastic screws. The cover plates are designed to cover 3 or 4-pole terminal blocks. Cross-connections Test adapters Cross-connection systems from the SAK and AKZ series, type Q, QL or VL or other freely accessible live components, must be protected with appropriate covers ADP 1 to 4 or TSK 31.5 as long as they are to be inserted safe from contact. Frequently, several terminals blocks must be electrically interconnected in order to create supply pick-offs. Because the terminal point usually needs to remain free for the conductor connection, a crossconnection bridge is placed in the middle. For adjacent cross-connections with varying potentials, partitions, end plates or small partitions must be inserted to maintain the nominal voltage. Cross-connection bridges can normally carry half of the rated terminal block current. Safe testing of wired terminal blocks is a basic requirement for fault-free functional sequences. The WTA..., STA..., ATA... test adapter systems for individual terminal block ranges are not only characterised by their quick and easy handling, but also offer other advantages: * conductor decoupling between the test Weidmuller distinguishes between the folprobe and the test conductor prevents lowing cross-connection units: that the test probe is pulled out when * type Q pre-assembled cross-connecthe cable is pulled (except for WTA /5... tions and ATA) * type QL permanent cross-connections * spring-loaded test contacts ensure relia* type VL removeable cross-connection ble connection and a low contact impestraps dance * type QS removeable cross-connection * locating hooks on both sides ensure firm plugs seating, even when croos-connections Sockets are fitted In place of cross-connections, sockets can * the modular concept enables the conbe attached to accept test or short-circuit struction of individual test units plugs. * single-pole test adpaters can be interTest plugs connected; strain relief and clear mar2.3 or 4 mm o test plugs are available for king options complement the systems measurement and test operations . Naturally, customary sockets can also be used whose test pick-off is performed by Designation spring-loaded test plugs. This option Incoming and outgoing cables can be applies even when cross-connections are labelled using various marking systems, fitted. e.g. dekafix, snap-on tags, etc. 2/73 Feed-through terminals SAKD 2.5 N SAK 2.5 SAK 4 DK 4 Q* (See page 3/14 for test adapter systems) Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A Technical data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG Blue KrG KrS PA Blue PA Orange PA Terminal block with Bez. PA Terminal block without Bez. PA End plate (thickness mm) KrG Blue KrG KrS PA Blue PA PA Blue PA Partition (thickness mm) TW WTW KrG Blue KrG KrS PA Blue PA HP Y Y Y Y 5/32,5/43,5 10/M 2,5/3,5 x 0,6 6/36,5/46,5 10/M 2,5/3,5 x 0,6 6,5/40/51,5 12/M 3/3,5 x 0,6 6/54/60 9/M 3/3,5 x 0,6 500 V/24 A/2,5 mm2 6 kV/3 800 V/24 A/2,5 mm2 8 kV/3 800 V/32 A/4 mm2 8 kV/3 500 V/2 x 32 A/4 mm2 6 kV/3 0,4...0,7 1 0,4...0,6 1 0,5...1,0 2 0,5...1,0 2 0,5...4 0,5...4 0,5...4 0,5...4 A2 30 A/4 mm2 20 20 0,5...6 0,5...2,5 0,5...4 0,5...2,5/44) A3 32 A/4 mm2 24 0,5...6 0,5...4 0,5...4 0,5...4 A4 41 A/6 mm2 32 0,5...4 1,5...4 0,5...4 0,5...4 A3 32 A/4 mm2 20 20 300 V/20 A/28...12 AWG 300 V/20 A/22...12 AWG Y Cat. No. Qty. 600 V/20 A/22...12 AWG 600 V/25 A/26...10 AWG Y Cat. No. Qty. 027962 100 027967 100 027963 100 0269661)3)100 0279661)2) 100 0269681)3)100 0279681)2) 100 0269641)3)100 1326361)2) 100 0322561) 10 0322861) 10 Type Cat. No. Qty. AP (1,5) 027952 20 AP (1,5) 027957 20 AP (1,5) 027953 20 AP (1,5) 6 046056 20 AP (1,5) 6 046058 20 AP (1,5) 8 027956 20 AP (1,5) 8 027958 20 600 V/20 A/22...12 AWG 600 V/36 A/26...10 AWG Y Cat. No. Qty. 012832 100 012837 100 012833 100 1716241)3) 0128361)2) 100 1716251)3) 0128381)2) 100 0105061)2) 100 0322661) 10 0308861) 10 Type Cat. No. Qty. AP (1,5) 011792 20 AP (1,5) 011797 20 AP (1,5) 011793 20 AP (1,5) 011796 20 AP (1,5) 011798 20 300 V/27 A/22...12 AWG 300 V/10 A/26...12 AWG Y Cat. No. Qty. TW TW TW TW TW TW TW TW TW TW TW TW 021556 021558 Type AP (1,5) AP (1,5) 100 100 040106 10 040116 10 Cat. No. Qty. 015096 019188 20 20 TW (1,5) TW (1,5) TW (1,5) 019186 019188 030750 20 20 20 TSch 3 036686 100 Q Q Q Q 036780 036790 036800 036810 50 50 50 20 (2,5) (2,5) (2,5) (1,5) (1,5) (1,0) 030282 030287 030283 030286 030288 029710 20 20 - 20 20 20 031916 100 (2,5) (2,5) (2,5) (1,5) (1,5) (1,0) 013012 010317 013013 013016 013018 019710 20 20 20 20 20 20 031916 100 059006*1)100 059008*1)100 132386*1) 10 Type Cat. No.Qty. AP (1,5) AP (1,5) 139716 139718 20 20 WTW (Ex) 105880 20 TW (2,0) 060700 20 TSch 6 019026 100 Small partition TSch 1 TSch 6 Cross-connection Q4 2-pole 3-pole 4-pole 10-pole 2-pole 3-pole 4-pole QB 4 2 3 4 10 Q Q Q Q 2 3 4 10 033700 033710 033720 036870 50 50 50 20 TSch 1 Q Q Q Q 2 3 4 10 033670 033680 033690 036880 50 50 50 20 Q2 Q3 Q4 Q 10 QB 2 QB 3 QB 4 033640 50 033650 50 033660 50 036860 20 048270** 100 048280** 50 048290** 50 VL 2 VH BS 019700 028510 029250 100 50 100 VL 2 VH BS 044670 50 105650 100 034310 100 FW 6.5 FS 6.5 046816 046826 - - FW 6 FW 6 046866 046876 Switchable cross-connection link VL 2 Marking tags BS VH Print Consecutive horizontal FW 5 047346 Consecutive vertical FS 5 047356 For further accessories see section 3, further marking material see section 8 * Accepts LS 2.8 shield lugs Cat. No. 105640 ** Max. 2.5 mm2 conductor connection when using QB 2/74 - - FW 6 FS 6 046866 046876 - - 1) Contact-proof with ADP 4 cover profile (see page 3/23) 3) Suitable for SST 3 safety pin 2) Not suitable for SST 3 safety pin 4) Cat. No. 027966 und 027968 - - Feed-thorugh terminals DK 4 QV* SAK 6 N SAK 10 SAK 16 (See page 3/14 for test adapter systems) Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG Blue KrG KrS PA Blue PA Orange PA Terminal block with Bez. Terminal block without Bez. End plate (thickness mm) Partition (thickness mm) TW WTW KrG Blue KrG KrS PA Blue PA Y Y 6/54/60 9 mm/M 3/3,5 x 0,6 8/40/51,5 12 mm/M 3,5/4,0 x 0,8 10/40/51,5 12 mm/M 4/5,5 x 1,0 12/50/57.5 15 mm/M 4/5,5 x 1,0 500 V/32 A/4 mm2 6 kV/3 800 V/41 A/6 mm2 8 kV/3 800 V/57 A/10 mm2 8 kV/3 1000 V/76 A/16 mm2 8 kV/3 0.5...1,0 2 0.8...1,6 3 4 0,5...4 1,5...4 0.5...4 0.5...4 A3 35 A/4 mm2 20 20 0,5...10 0,5...6 0,5...10 0,5...6 A5 300 V/27 A/22...12 AWG 300 V/10 A/26...12 AWG Y Cat. No. Qty. 600 V/40 A/22...8 AWG 600 V/47 A/20...8 AWG Y Cat. No. Qty. 019322 100 Cat. No. Qty. AP (1.5) AP (1.5) 2,0 139716 139718 20 20 2,0...2,4 4 1,5...10 2,5...16 1,5...16 1,5...10 B6 76 A/16 mm2 57 2.5...10 4...16 4...16 4...16 B6 Qty. 100 100 100 100 100 600 V/80 A/12...4 AWG 600 V/87 A/10...4 AWG Y Cat. No. Qty. 027102 50 019323 100 0193261) 100 0193281) 100 600 V/60 A/14...6 AWG 600 V/65 A/14...6 AWG Y Cat. No. 0110022) 011007 011003 0110061) 0110081) 0322761) 10 0308961) 10 0353261) 0353161) 10 10 41 059026*1) 100 059028*1) 100 Type KrG Blue KrG KrS PA Blue PA Y 027103 50 0271061) 50 0271081) 50 Type AP (1,5) AP (1,5) AP (1,5) AP (1,5) AP (1,5) Cat. No. Qty. 011792 20 011797 20 011793 20 011796 20 011798 20 Type AP (1,5) AP (1,5) AP (1,5) AP (1,5) AP (1,5) Cat. No. Qty. 011792 20 011797 20 011793 20 011796 20 011798 20 Type AP (3.0) Cat. No. Qty. 027112 20 AP (3.0) AP (1.5) AP (1.5) 027113 027116 027118 20 20 20 TW (1,5) 013012 20 20 20 20 20 20 100 20 20 20 20 20 20 100 028112 013013 013016 013018 019710 031916 013012 013017 013013 013016 013018 019710 031916 TW (3.0) TW (1,5) TW (1,5) TW (1,5) TW (1,5) TSch 1 TW (1,5) TW (1,5) TW (1,5) TW (1,5) TW (1,5) TW (1,5) TSch 1 TW (3.0) TW (1.5) TW (1.5) TW (2.0) TSch 1 028113 030366 030368 060700 031916 20 10 10 20 100 Q Q Q Q 045710 045720 045730 045740 50 50 50 20 Q Q Q Q 045750 045760 045770 045780 50 50 50 20 WTW (Ex) 105880 20 TW (2.0) TSch 6 060700 019026 20 100 Q2 Q3 Q4 Q 10 QB 2 QB 3 QB 4 033640 033650 033660 036860 048270** 048280** 048290** 50 50 50 20 100 50 50 Q Q Q Q 045670 045680 045690 045700 50 50 50 20 AD 4 030340 BSK M 2.5 x18 030330 50 100 AD 4 019660 BSK M 3 x 22 012890 50 100 AD 4 017860 BSK M 3 x 22 012890 50 100 AD 4 051820 BSK M 3 x 22 012890 50 100 VL 2 VH BS 044670 105650 034310 50 100 100 VL 2 VH BS 019470 028510 029250 50 50 100 VL 2 VH BS 013590 028510 029250 50 50 100 VL 2 VH BS 013580 028510 029250 50 50 100 Print Consecutive horizontal FW 6 046866 Consecutive vertical FW 6 046876 For further accessories see section 3, further marking material see section 8 - - FW 8 FS 8 127696 128966 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - Small partition TSch 6 Cross-connection 2-pole 3-pole 4-pole 10-pole Q4 QB 4 2 3 4 10 2 3 4 10 2 3 4 10 Cover Switchable cross-connection link VL 2 Marking tags BS VH *) Accepts LS 2.8 shield lugs Cat. No. 105640 **) Max. 2.5 mm2 conductor connection when using QB 1) 2) Contact-proof with ADP 4 cover profile (see page 3/23) See page 2/715 for ceramic terminals 2/75 Feed-through terminals SAK 35 N Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG Hexagon socket KrG Hexagon socket blue KrG KrS Hexagon socket KrS PA Hexagon socket PA Blue PA Terminal block with marking Terminal block without marking End plate (thickness mm) KrG Blue KrG KrS PA Blue PA Orange PA SAK 35 SAK 70 SAK 95 Y Y Y Y 16/58/67,5 18 mm/M 6/6,5 x 1,2 18/58/67,5 20 mm/M 6/6,5 x 1,2 22/75/79.5 24 mm/M 8/S 6 D911 28/83,5/100,5 30 mm/M 10/S 8 D6911 1000 V/125 A/35 mm2 8 kV/3 800 V/125 A/35 mm2 8 kV/3 1000 V/192 A/70 mm2 8 kV/3 1000 V/232 A/95 mm2 8 kV/3 2,5...5,0/3,0...6,0*** 2,5...5,0/3,0...6,0*** 6,0...12,0 10,0...20,0 2,5...16 2,5...50 2,5...35 2,5...35 B8 138 A/35 mm2 65 65 6...10 16...50 10...35 10...35 B9 138 A/35 mm2 65 65 16 16...70 16...70 16...35 B 11 213 A/70 mm2 180 10...16 10...120 10...95 10...35 B 12 258 A/120 mm2 180 600 V/100 A/12...2 AWG 600 V/120 A/12...2 AWG Y Cat. No. Qty. 055062 20 055572 20 600 V/100 A/6...2 AWG 600 V/145 A/6...2 AWG Y Cat. No. Qty. 030352 20 047652 20 600 V/145 A/4...2/0 AWG 600 V/150 A/4...2/0 AWG Y Cat. No. Qty. 600 V/190 A/6...3/0 AWG 600 V/260 A/6...3/0 AWG Y Cat. No. Qty. 055063 055573 055066 055576 20 20 20 20 030353 20 030356 047656 030358 20 20 20 Type AP (3,0) AP (3,0) AP (3,0) AP (1,5) AP (3,0) Cat. No. Qty. 030362 10 030367 10 030363 10 030366 10 030368 10 Type AP (3,0) AP (3,0) AP (3,0) AP (1,5) AP (3,0) Cat. No. Qty. 030362 10 030367 10 030363 10 030366 10 030368 10 TW (3,0) 030432 10 TW (3,0) 030432 10 TW (3,0) TW (1,5) 030433 030436 10 10 TW (3,0) TW (1,5) 030433 030436 10 10 QL 2 QL 3 QL 4 QL 10 VH 17 BS M 4x30 SS M 4 056490 056500 056510 056520 026700 026710 013640 50 50 50 20 50 50 100 QL 2 QL 3 QL 4 QL 10 VH 17 BS M 4x30 SS M 4 012360 012370 012380 033860 026700 026710 013640 20 20 20 20 50 50 100 VL 2 VH 24,5 BS M 4x35 012400 029870 029890 50 50 50 AD 4 BSK M 4x32 PS 4 017870 012910 029960 20 50 20 FW 5 FS 5 047346 047356 - - 034082 034087 10 10 034083 10 Type AP (4.0) Cat. No. Qty. 034092 10 AP (4.0) AP (2.0) 034093 034096 10 10 QL 2 QL 3 034530 016700 20 20 VH 30.5 BS M 5x45 SS M 5 034550 034560 034610 20 20 100 AD 4 BSK M 5x45 PS 4 034430 034440 029960 - 50 20 FW 5 FS 5 047346 047356 - - 055052 10 Type AP (3,0) AP (3,0) Cat. No. Qty. 055092 10 055097 10 QL 2 055120 10 VH 35 BS M 5x50 055110 063020 10 20 ADP 4 048540 - PS 4 029960 20 FW 5 FS 5 047346 047356 - - Partition (thickness mm) KrG Blue KrG KrS PA Blue PA Cross-connection 2-pole 3-pole 4-pole 10-pole QL 3 VH BS Switchable cross-connection link VL 2 BS Cover / Test plug VH 057670 012910 029960 50 50 20 Print Consecutive horizontal FW 5 047346 Consecutive vertical FS 5 047356 For further accessories see section 3, further marking material see section 8 - - PS 4 AD 4 BSK M 4x32 PS 4 Marking tags *** For hexagon socket 2/76 Feed-through terminals for thermocouples DK 4 TC SAK 2.5 TC Busbars made from thermocouple material according to DIN IEC 584 W Y Y Weidmullers thermocouple terminals are specially designed for transmitting the smallest voltages in temperature measuring circuits. Special busbars ensure that no false signals occur in the terminal when temperature differences exist in the positive and negative path. This high measuring precision is necessary for, e.g. test beds aircraft engines, for complicated chemical processes, control, etc. Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade 6/36,5/49,5 10 mm/M 2,5/3,5 x 0,6 6/54/59,5 9 mm/M 3/3,5 x 0,6 Technical data/VDE Nominal voltage/nominal current nominal cross-section -/-/ 2,5 mm2 -/-/ 4 mm2 I. Configuration of a temperature measuring circuit 1 Thermocouple (sensor) 4 Reference point 2 Thermocouple terminals 5 Supply conductors (to and from) 3 Compensating conductor 6 Measuring device The thermocouple terminals displayed in this measurement circuit are used to thermoelectrically transmit thermal e.m.f. of the thermocouple to the reference point and indicating device via the thermocouple. Thermocouple terminals are required for the construction of temperature measuring circuits; SAK 2.5 NiCr for the positive and SAK 2.5 Ni for the negative voltage branches. II. Symbols Thermocouples according to IEC 584 DIN 43710 Terminal designation a)(Type J) Fe (positive leg) CuNi (negative leg) b)(Type T) Cu (positive leg) CuNi (negative leg) c)(Type K) NiCr (positive leg) Ni (negative leg) d)(Type E) NiCr (positive leg) CuNi (negative leg) 2/78 Ordering data Version NiCr Ni CuNi Fe Cu NiCr/Ni Cu/CuNi Fe/CuNi Type Y Cat. No. 010726 010716 018986 019006 018996 Qty. 100 100 100 100 100 Y K T J End plate (thickness mm) 133826 133816 133806 Type KrG Blue KrG KrS PA Blue PA Orange PA Cat. No. Qty. Cat. No. Qty. AP (1,5) 027956 20 TW (1,5) 030286 20 Type 100 100 100 Cat. No. Qty. AP (1,5) 063136 20 WTW (Ex)e TW HP (2,0) 105880 060700 20 20 FW 6 FS 6 046866 046876 - - Partition (thickness mm) KrG Blue KrG KrS PA WEM for TS 32 HP Busbar material trade name Iron Constantan Copper Constantan Chromel Alumel Chromel Constantan Marking material Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 - - Feed-through terminals Terminals/accessories SAKG 28 I SAKG 28 II Y The Weidmuller SAKG range offers the following connection variants: * clamping yoke connection, Version III. The stripped conductor can be connected without further preparation. * flat lug, Version II. Two types of threading are provided here. a) screw set with lock nut b) with thread in busbar * clamping yoke/flat lug as a combination, Version I. Versions Version I Version II without thread Version II with thread Version III Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade 28/70/63,5 15 mm/M 6/- 28/70/53 -/M 6/- 1000 V*/125 A/35 mm2 8 kV/3 1000 V*/125 A/35 mm2 8 kV/3 3...6 3...6 6...35 6...35 10...35 6...35 B9 135 A/50 mm2 (QL 2) 110 (QL 2) 110 600 V/95 A/2 AWG 600 V/110 A/6...1 AWG Y Cat. No. Qty. 017002 10 600 V/115 A/2 AWG 600 V/110 A/6...1 AWG Y Cat. No. Qty. 017032 10 Tropic-proof Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Tropic-proof TW 1 (2) TW 1 015140 016460 10 10 TW 1 (2) TW 1 015140 016460 10 10 QL 2 QL 3 QL 4 019390 040760 040770 5 5 5 QL 2 QL 3 QL 4 019390 040760 040770 5 5 5 AH 28 032666 5 AH 28 032666 5 FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type KrG End plate, Hard paper (thickness mm) Cables with cable lugs are connected to SAKG terminals of Version I and to SS stud terminals. Y Fitting instructions for SAKG terminals When tightening the clamping screw, it is recommended that the conductor be held against the direction of tightening to prevent deformation of the mounting rail and so as not to place the terminal foot under undue torsional forces. Partition, Hard paper (thickness mm) Cross-connection 2-pole 3-pole 4-pole Cover Cover To ensure shock protection following connection of conductors, AH covers can be clipped onto the terminal. Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 * During conductor connection, observe clearance and creepage distances. Insert partitions if necessary See Page 1/9 for a table of clearance and creepage distances. 2/79 Feed-through terminals SAKG 28 II G SAKG 28 III Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG Two clamping yokes KrG SAKG 32 I Y SAKG 32 II Y Y 28/70/53 -/M 6/- 28/70/63,5 15 mm/M 6/- 32/87/84 26 mm/M 8/- 32/80/53 -/M 8/- 1000 V*/125 A/35 mm2 8 kV/3 1000 V*/125 A/35 mm2 8 kV/3 1000 V*/150 A/50 mm2 8 kV/3 1000 V*/150 A/50 mm2 8 kV/3 3...6 3...6 6...12 6...12 6...35 6...35 10...35 6...35 B9 10...70 10...70 10...70 10...35 B 11 170 A/70 mm2 (QL 2) 170 (QL 2) 110 168 A/70 mm2 600 V/110 A/6...1 AWG Y Cat. No. Qty. 018502 10 600 V/95 A/2 AWG 600 V/135 A/8...2 AWG Y Cat. No. Qty. 017082 10 600 V/165 A/3 AWG 600 V/170 A/1...2/0 AWG Y Cat. No. Qty. 028662 10 600 V/200 A/3 AWG 600 V/170 A/1...2/0 AWG Y Cat. No. Qty. 017042 10 Tropic-proof Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Tropic-proof TW 1 (2) TW 1 015140 016460 10 10 TW 1 (2) TW 1 015140 016460 TW 2 (2) TW 2 017710 017990 10 10 TW 1 (2) TW 1 015140 016460 10 10 QL 2 QL 3 QL 4 019390 040760 040770 5 5 5 QL 2 QL 3 QL 4 019400 044150 044160 5 5 5 QL 2 QL 3 QL 4 019400 044150 044160 5 5 5 AH 28 032666 5 AH 28 032666 5 AH 32 032676 5 AH 32 032676 5 FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - End plate, Hard paper (thickness mm) Partition, Hard paper (thickness mm) 10 10 Cross-connection 2-pole 3-pole 4-pole Cover Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 * During conductor connection, observe clearance and creepage distances. Insert partitions if necessary. See Page 1/19 for a table of clearance and creepage distances. 2/80 SAKG 32 II G SAKG 32 III Y SAKG 70 II G Y SAKG 40 I SAKG 40 II Y SAKG 40 II G Y Y 32/80/53 -/M 8/- 32/94/84 26 mm/M 8/- 32/84/54 -/M 8/- 40/95/84 27 mm/M 10/- 40/90/53 -/M 10/- 40/90/55 -/M 10/- 1000 V*/150 A/50 mm2 8 kV/3 1000 V*/150 A/50 mm2 8 kV/3 1000 V*/192 A/70 mm2 8 kV/3 1000 V*/232 A/95 mm2 8 kV/3 1000 V*/232 A/95 mm2 8 kV/3 1000 V*/232 A/95 mm2 8 kV/3 6...12 6...12 6...12 10...20 10...20 168 A/70 mm2 10...70 10...70 10...70 10...35 B 11 192 A/70 mm2 220 A/70 mm2 (QL 2) 170 10...95 10...35 10...95 10...35 B 12 250 A/95 mm2 (QL 2) 250 250 A/95 mm2 (QL 2) 250 250 A/95 mm2 (QL 2) 250 600 V/170 A/1...2/0 AWG Y Cat. No. Qty. 018512 10 600 V/165 A/3 AWG 600 V/185 A/1...2/0 AWG Y Cat. No. Qty. 028672 10 - 600 V/200 A/2/0...4/0 AWG Y Cat. No. Qty. 015042 10 600 V/195 A/4/0 AWG 600 V/250 A/2/0...4/0AWG Y Cat. No. Qty. 028682 10 600 V/230 A/4/0 AWG 600 V/250 A/2/0...4/0 AWG Y Cat. No. Qty. 017052 10 600 V/230 A/4/0 AWG 600 V/250 A/2/0...4/0 AWG Y Cat. No. Qty. 018522 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 1 (2) EP 1 (2) Cat. No. Qty. 020510 10 020520 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 TW 1 (2) TW 1 015140 016460 10 10 TW 2 (2) TW 2 017710 017990 TW 1 (2) TW 1 (2) 015140 016460 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 QL 2 QL 3 QL 4 019400 044150 044160 5 5 5 QL 2 QL 3 QL 4 019400 044150 044160 10 10 10 QL 2 QL 3 QL 4 019410 026350 040980 10 10 10 QL 2 QL 3 QL 4 019410 026350 040980 10 10 10 QL 2 QL 3 QL 4 019410 026350 040980 10 10 10 AH 32 032676 5 AH 32 032676 5 AH 32/AH 70 032676 5 AH 40 032686 5 AH 40 032686 5 AH 40 032686 5 FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - 10 10 * During conductor connection, observe clearance and creepage distances. Insert partitions if necessary. See Page 1/19 for a table of clearance and creepage distances. 2/81 Feed-through terminals SAKG 40 III SAKG 46 II Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade SAKG 46 II G Y SAKG 54 II Y Y 40/100/84 27 mm/M 10/- 46/106/55 -/M 12/- 46/106/57,5 -/M 12/- 54/122/57 -/M 16/- 1000 V*/232 A/95 mm2 8 kV/3 1000 V*/309 A/150 mm2 8 kV/3 1000 V*/309 A/150 mm2 8 kV/3 1000 V*/415 A/240 mm2 8 kV/3 10...20 14...31 14...31 25...60 10...95 10...95 10...95 10...35 B 12 265 A/95 mm2 415 A/150 mm2 415 A/150 mm2 (QL 2) 415 600 A/240 mm2 (QL 2) 600 600 V/195 A/4/0 AWG 600 V/230 A/2/0...4/0 AWG Y Cat. No. Qty. 028692 10 600 V/285 A/4/0 AWG 600 V/365 A/300 MCM Y Cat. No. Qty. 017062 10 600 V/285 A/4/0 AWG 600 V/365 A/300 MCM Y Cat. No. Qty. 018532 10 600 V/380 A/500 MCM 600 V/600 A/300...500 MCM Y Cat. No. Qty. 017072 10 Tropic-proof Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Tropic-proof TW 2 (2) TW 2 (2) 017710 017990 TW 2 (2) TW 2 (2) 017710 017990 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 QL 2 QL 3 QL 4 024700 044440 044450 5 5 5 QL 2 QL 3 QL 4 024700 044440 044450 5 5 5 QL 2 QL 3 QL 4 026440 040800 024740 5 5 5 FW 5 FS 5 047346 047356 - - VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG Two clamping yokes KrG End plate, Hard paper (thickness mm) Partition, Hard paper (thickness mm) 10 10 Cross-connection 2-pole 3-pole 4-pole Cover Marking tags Print Consecutive horizontal Consecutive vertical AH 40 032686 5 AH 46 032696 5 AH 46 032696 5 FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - For further accessories see section 3, further marking material see section 8 * During conductor connection, observe clearance and creepage distances. Insert partitions if necessary. See Page 1/19 for a table of clearance and creepage distances. 2/82 SAKG 54 II G SAKG 46/I AL Y Y 54/122/60 -/M 16/- 46/112/74 23 mm/M 12/M 14/- 1000 V*/415 A/240 mm2 8 kV/3 1000 V*/309 A/150 mm2 8 kV/3 25...60 14...31/25...40 50...240 35...185 600 A/240 mm2 (QL 2) 600 600 V/380 A/500 MCM 600 V/600 A/300...500 MCM Y Cat. No. Qty. 018542 10 - - Y Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 Type EP 2 (2) EP 2 (2) Cat. No. Qty. 020530 10 020540 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 TW 2 (2) TW 2 (2) 017710 017990 10 10 QL 2 QL 3 QL 4 026440 040800 024740 5 5 5 QL 2 QL 3 QL 4 019400 044150 044160 5 5 5 AH 46 032696 5 FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - Cat. No. Qty. 128792** 5 128802*** 5 ** Suitable for connection of 1 aluminium conductor of max. 185 mm2 *** Suitable for connection of 2 aluminium conductors of max. 185 mm2 2/83 SS 8 SS 10 SS 12 25 28 32 SS 6 28 Stud terminals Y W Dimensions Width / length / height (mm) with TS 32 Y Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section* Rated impulse voltage / pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version KrG PA GF PA PPO KrG for TS 35 x 7.5 PA for TS 35 x 15/ 2.3 PA Y W Y W Y W 18/40/62 18/49,5/54,5 -/M 6/- 36/60/68 36,5/60/68 -/M 8/- 36/60/68 36,5/60/68 -/M 10/- 36/60/72 36,5/60/72 -/M 12/- 400 V1)/76 A/16 mm2 6 kV/3 1000 V1)/125 A/35 mm2 1000V1)/192 A/70 mm2 1000 V1)/232 A/95 mm2 3...6 6...12 10...20 14...31 82 A/16 mm2 135 A/35 mm2 207A/70 mm2 250 A/95 mm2 600 V/85 600 V/65 Y 049822 A/12...4 AWG A/6 AWG Qty. W 10 064982 Qty. 10 Qty. W Y 049810 End plate, Hard paper (thickness mm) Type 10 Cat. No. Qty. Type AP/TW (2) TW HGW (2) 060710 TW (2) TW (2) QL 2 QL 3 QL 4 028430 5 027300 5 on request PA PPO 133190 Qty. Y 10 048490 Cat. No. Qty. 133320 10 Qty. W 10 Type AP/TW (2) 133200 Qty. Y 10 049830 Cat. No. Qty. 133320 10 Qty. W 10 Type AP/TW (2) 133210 Qty. 10 Cat. No. Qty. 133320 10 Partition, Hard paper (thickness mm) KrG PA PPO TW HGW 20 Y 045586 W 133320 10 10 QL 2 QL 3 134620 157885 5 5 FW 5 FS 5 047346 047356 - - TW (2) TW (2) Y 045586 W 133320 10 10 QL 2 QL 3 134620 157885 5 5 FW 5 FS 5 047346 047356 - - TW (2) TW (2) Y 045586 W 133320 10 10 QL 2 134600 5 FW 5 FS 5 047346 047356 - - TW Cross-connection 2-pole 3-pole 4-pole Cover Marking tags Print Consecutive horizontal FW 5 047346 Consecutive vertical FS 5 047356 For further accessories see section 3, further marking material see section 8 1 * Dependent on cable lug 2/84 ) with partition - - W ST 5 STSL 5 without solder connection with solder connection3) 37 KST 12 39 W KST 10 30 KST 8 21 KST 6 18 KST 5 W W W 24/60/59,5 24/62,5/54 -/M 5/- 24/60/59,5 24/62,5/54 -/M 6/- 24/60/69,5 24/62,5/54 -/M 8/- 34/60/79,5 34/62,5/74 -/M 10/- 34/60/79,5 34/62,5/74 -/M 12/- 16,3/522)/45,5 1000 V1)/57 A/10 mm2 8 kV/3 1000 V1)/76 A/16 mm2 8 kV/3 1000 V1)/125 A/35 mm2 8 kV/3 1000 V1)/192 A/70 mm2 8 kV/3 1000 V1)/232 A/95 mm2 8 kV/3 750 V/76 A/16 mm 8 kV/3 2...4 3...6 6...12 10...20 14...31 2...4 65 A/10 mm2 82 A/16 mm2 200 135 A/35 mm2 200 207 A/70 mm2 200 250 A/95 mm2 200 85 A/16 mm2 600 V/50 A/12...6 AWG - Y Qty. W 600 V/65 A/12...6 AWG - Y Qty. W 600 V/115 A/12...2 AWG - Y Qty. W Qty. 600 V/175 A/12...2/0 - Y Qty. W 600 V/200 A/12...3/0 - Y Qty. W 600 V/65 A/12...10 AWG - Y Qty. Y Qty. ST 5 STSL 5 950132 950133 950337 25 950131 950823 952830 Type TW/KST (2) QL 2 FW 5 FS 5 ) with partition 1 Qty. 950139 950339 047346 047356 25 25 25 Cat. No. Qty. 10 1 - - 950694 952831 Type TW/KST (2) QL 2 FW 5 FS 5 Qty. 25 25 Cat. No. Qty. 950139 950135 047346 047356 25 10 5 - - 950695 952832 Type TW KST (2) QL 2 FW 5 FS 5 950139 950136 047346 047356 20 25 25 Cat. No. Qty. 10 1 - - 950134 950696 952833 Type TW KST (2) QL 2 FW 5 FS 5 Qty. 950139 950137 047346 047356 10 1 - - 044836 044834 950697 952834 Type TW KST (2) QL 2 FW 5 FS 5 Qty. 20 20 20 Cat. No. Qty. -/M 5/- 950138 047346 047356 2) 3) 1 1 20 20 Cat. No. Qty. 950139 1 046286 1 046284 Type Cat. No. Qty. AP (1,5) 044724 1 TW (1,5) TW (1,5) 047766 047764 1 1 QL 2 383430 1 044770 1 046866 046876 - - 10 1 - - FW 6 FS 6 Width with soldering tag 76.5 mm Soldering connection 2.5 mm2 (illustrated) 2/85 PE terminals EK 2.5 N EK 4 EK 10 Y Y EK 16 Y Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade 6/36.5/49.5 10 mm/M 2,5/3,5 x 0,6 8/40/51.5 12 mm/M 3/3,5 x 0,6 10/40/51.5 12 mm/M 6/5,5 x 1,0 12/50/57.5 16 mm/M 4/5,5 x 1,0 Rated data IEC 947-7-2 Rated voltage/current for PEN/cross-section -/-/2.5 mm2 -/-/4 mm2 -/-/10 mm2 -/-/16 mm2 0,4...0,8/0,5...1,0* 1/2 0,5...1,0/0,5...1,0* 2/2 1,2...2,0/0,5...1,0* 4/2 1,2...2,4/0,8...1,0* 4/3 0.5...4 0,5...1,5 0.5...4 0.5...2.5 22...14 A3 Y 0.5...6 0,5...4 0.5...4 0.5...4 22...10 A4 Y 0.5...10 1,5...6 0.5...10 0.5...10 20....8 B6 Y 2.5...16 2,5...16 2.5...16 4...16 12...6 B6 Y Rated voltage/impulse voltage VDE 0110/1.89/pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Cable AWG Plug gauge according to 947-1 Ordering data Nm mm2 mm2 mm2 mm2 Nr. Size Version Green/yellow PA Cat. No. Qty. 047436 100 Cat. No. Qty. 035456 100 Cat. No. Qty. 035466 80 Cat. No. Qty. 037466 50 Blank Two clamping yokes blank Hexagon socket blank Support block Type SH 2 Cat. No. Qty. 049492 10 Type SH 2 Cat. No. Qty. 049492 10 Type SH 2 Cat. No. Qty. 049492 10 Type SH 2 Cat. No. Qty. 049492 10 FW 6.5 FS 6.5 046816 046826 FW 5 FS 5 047346 047356 FW 5 FS 5 047346 047356 For insulation of mounting rails in insulated-earth installations Marking material Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 * For centre screw 2/86 - - - - - - EK 35 EK 2 Y SAKE 35 Y SAKE 70 Y Y 18/58/67.5 20 mm/M 6/6,5 x 1,2 10/52/38 14 mm/M 5/- 14/46/39 16 mm/M 6/- 18/94/59,5 25 mm/M 8/- -/-/35 mm2 -/-/10 -/-/35 mm2 -/-/70 mm2 2,5...5,0/1,2...1,6* -/3 1,2...2,4/2,0...4,0* 2,5...5,0/2,0...4,0* 6,0...12/2,0...4,0* 6...16 16...50 10...35 10...35 10...2 B9 Y 1,5...10 1,5...10 1,5...10 1,5...10 16...8 B6 Y 6...35 6...35 6...16 10...35 8...2 B8 Y 10...70** 10...70 10...70 10...70 6...0 B 10 Y Cat. No. Qty. 035476 20 Cat. No. Qty. 032310 20 Cat. No. Qty. 014440 20 one clamping yoke Type SH 2 Cat. No. Qty. 049492 10 FW 5 FS 5 047346 047356 Type Cat. No. Qty. Type SH 2 Cat. No. Qty. 049492 10 Cat. No. Qty. 021320 Type SH 2 20 Cat. No. Qty. 049492 10 - - 2/87 Fuse terminals ASK 1 for fuse inserts Dimensions Width / length / height (mm) with TS 32 Y Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data / feed-through-terminal base Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version KDKS 1 KDKS 1/35 SAKS 1 SAKS 1/35 SAKS 1/G25 SAKS 1/35/G25 W Y Y W Y W 5 x 20 without indicator 5 x 20 without indicator 5 x 20 without indicator 5 x 20 with indicator 8/58/45.5 8/58/44 9 mm/M 3/3,5 x 0,6 8/73,5/59,8 8/73,5/55,7 9 mm/M 3/3,5 x 0,6 13/54/61 13/54/54 12 mm/M 4/5,5 x 1,0 13/54/61 13/54/54 12 mm/M 4/5,5 x 1,0 500 V AC/6.3 A/4 mm2 6 kV/3 500 V~/6,3 A/4 mm2 6 kV/3 500 V~/10 A/10 mm2 6 kV/3 500 V~/10 A/10 mm2 6 kV/3 0,5...1,0 2 0,5...1,0 2 1,2...2,4 4 1,2...2,4 4 0.5...4 1,5...4 0.5...4 0.5...4 A4 (QB 2...4) 10 0,5...4 0,5...16 1,5...10 0,5...10 0,5...10 B6 (QL 2...5) 47 (QL 6...10) 36 0,5...16 1,5...10 0,5...10 0,5...10 B6 (QL 2...5) 47 (QL 6...10) 36 300 V/6.3 A/12 max. AWG 300 V/6.3 A/26...12 AWG Y+W Best.-Nr Qty. 300 V/15 A/12 max. AWG 300 V/6 A/22...10 AWG 600 V/10 A/26...10 AWG Y Qty. W Qty. Wemid-beige 050160 20 019122 20 050162 20 300 V/6 A/22...10 AWG 600 V/10 A/26...10 AW Y Qty. W Wemid-beige 050150 019112 20 050152 0,5...4 0,5...4 A4 (QB 2...4) 10 047456 100 Y 950330 Qty. W 50 950331 Qty. 50 Y W Qty. 20 20 Cross-connections Fixing screw for Cross-connections End plate / partition (thickness mm) G fuse inserts 5 x 20 mm to DIN 41660 IEC 127 BL 1 Rated voltage 250 V~ Switching capacity 1500 A (at 250 V, 50 Hz, cos = 0.7) Rated current (A): 0.10 0.20 0.25 0.50 1.0 1.6 2.0 2.5 Screw cap/disconnect lever (spare) Type AP (1.5) fast fast fast fast fast fast fast fast TH Red pull lever SIHA Marking tags Print Consecutive horizontal FW 8 Consecutive vertical FS 8 For further accessories see section 3, further marking material see section 2/88 Cat. No. Qty. 038036 20 043040 043050 043060 043070 043080 043090 043100 10 10 10 10 10 10 10 037706 159302 100 100 127696 128966 8 - - Type AP 1 KDKS for Y TW (2,0) Cat. No. Qty. 950333 25 060700 20 043040 043050 043060 043070 043080 043090 043100 10 10 10 10 10 10 10 TH SIHA 037706 159302 100 100 FW 8 FS 8 127696 128966 - - QL 2 QL 3 QL 4 QL 10 019140 019150 019160 033880 BS (M 3 x 6) 034620 Type AP (2,5) Wemid-beige for Y TW (2,0) Cat. No. Qty. 019132 20 019130 060700 20 043040 10 043050 10 043060 10 043070 10 043080 10 043090 10 043100 10 More fuse cartridges see Page 2/93 SK (5 x 20) 028210 20 FW 5 FS 5 047346 047356 - - Type AP (2,5) Wemid-beige for Y TW (2,0) Cat. No. Qty. 019132 20 019130 060700 20 0,25 (m) 0,5 (m) 0,8 (m) 1 (m) 10 (m) 2 (f) 4 (f) 6,3 (f) 054690 051030 064640 026580 019310 019270 019280 019290 10 10 10 10 10 10 10 10 SK (5 x 25) 028200 20 FW 5 FS 5 047346 047356 - - KSKM 1 Fuse terminals KSKM 2 Y Dimensions Width / length / height (mm) with TS 32 Y Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data / feed-through-terminal base Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version KSKM 3 Y Y 13/69/62 13/69/63 12 mm/-/- 13/69/62 13/69/63 12 mm/-/- 13/69/62 13/69/63 12 mm/-/- 250 V~/6,3 A1)/10 mm2 250 V~/13 A2)/10 mm2 440 V~/10 A/10 mm2 0,5...16 0,5...16 0,5...16 0,5...10 0,5...10 0,5...10 B6 B6 B6 600 V/10 A/22...8 AWG 600 V/15 A/22...8 AWG 600 V/15 A/22...8 AWG Y 950957 Wemid Qty. W 20 950960 Wemid VP 20 Y 950958 Wemid Qty. W 20 950961 Wemid Qty. 20 Y 950959 Wemid Qty. W 20 950962 Wemid Qty. 20 24 V- 24 V~ 24 V- ~ 48 V- 48 V~ 48 V- ~ 40-50 V- 40-50 V~ 100 V- 100 V- ~ 125 V~ 220 V- 250 V~ 250 V- ~ for fuse inserts End plate / partition (thickness mm) Type AP (3) G fuse inserts 5 x 20 mm to DIN 41660 IEC 127 BL 1 Rated current (A): Rated voltage 250 V~ fast Switching capacity 1500 A (at 250 V, 50 Hz, cos = 0.7) 0,2 fast 0,25 fast 0,5 fast 0,63 fast 1,0 fast 1,6 fast 2,0 fast 2,5 fast 3,15 fast 4,0 fast 5,0 fast 6,3 fast Contact sleeve Cat. No. Qty. 950963 20 043040 043050 043060 043900 043070 043080 043090 043100 043110 043120 043130 043140 10 10 10 10 10 10 10 10 10 10 10 10 5 x 20 SBL 044610 40 FW 5 FS 5 047346 047356 - - Type AP (3) Cat. No. Qty. 950963 20 1 x 1/4" SBL 044620 40 FW 5 FS 5 047346 047356 - - Type AP (3) Cat. No. Qty. 950963 20 11/4 x1/4" E2A E3A E5A E7A E 10 A 029450 029570 029460 029580 029390 10 10 10 10 10 1 1/4 x 1/4" SBL 044630 40 Screw cap/disconnect lever (spare) Marking tags Red pull lever Print Consecutive horizontal Consecutive vertical FW 5 FS 5 047346 047356 - - For further accessories see section 3, further marking material see section 8 1) 2) Max. fuse rating i.a.w DIN 41660, IEC 127 CEE4 Type 1 Fuses according to BS 1362 2/89 Fuse terminals SAKS 3 SAKS 3/35 SAKS 4 SAKS 4/35 Y W Dimensions Width / length / height (mm) with TS 32 Y Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data terminal base Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data UL CSA Version Y W 24/75/73 24/75/66 14 mm/M 4/5,5 x 1 28/80/80,5 28/80/66 13 mm/M 4/5,5 x 1 500 V AC/10 A/10 mm2 6 kV/3 400 V~**/16 A/10 mm2 6 kV/3 400 V~/63 A***/16 mm2 6 kV/3 1,2...2,4 4 1,2...2,4 4 1,2...2,4 4 0.5...16 1,5...10 0.5...10 0.5...10 B6 (QL 2...5) 47 (QL 6...10) 36 0,5...16 1,5...10 0,5...10 0,5...10 B6 (QL 2...5) 47 (QL 6...10) 36 1,5...16 1,5...16 1,5...16 1,5...16 B7 (QL 2...5) 47 (QL 6...10) 36 300 V/10 A/22...10 AWG 600 V/10 A/22...10 AWG Y Qty. W Qty. 600 V/30 A/22...8 AWG Y Qty. W 0667523) 0328924) 20 20 032132 20 Wemid colours PA HP Y W 13/54/61 13/54/55 12 mm/M 4/5,5 x 1 0248923) 20 0297524) 20 End plate/partition (thickness mm) SAKS 5 SAKS 5/35 Type AP (2.5) for Y TW (2.0) Cat. No. Qty. 019132 QL 2 QL 3 QL 4 QL 10 019140 019150 019160 033880 BS (M 3 x 6) 034620 E 0,5 A E1A E2A 053380 052550 029450 E E E E 029570 029460 029580 029390 Neozed D 01 Type TW HP (2,0) QL QL QL QL Qty. 050182 20 050180 20 600 V/63 A/14...6 AWG Y Qty. W 035942 20 Qty. 050212 20 050210 20 Cat. No. Qty. 060700* 20 Neozed D 02 Type TW HP (2,0) Cat. No. Qty. 060700* 20 032800 032810 032820 033900 20 20 20 20 QL QL QL QL 020780 020790 020800 033890 20 20 20 20 SS M 4 BS M 4x9 Gauge piece P 14/2 P 14/4 P 14/6 013640 010330 100 100 SS M 4 BS M 4x9 Gauge piece 013640 010330 100 100 013800 013810 032860 50 50 50 P 14/10 032870 50 P P P P 036180 036190 036200 036210 50 50 50 50 380 V 036130 036140 036150 036160 036170 10 10 10 10 10 20 060700 Cross-connections Fixing screws for Cross-connections Fuse inserts 1 1/4" x 1/4" Nominal current (A): 0.5 high-speed according to DEF 63/size 0 1.0 high-speed without indicator 2.0 high-speed 3.0 high-speed 5.0 high-speed 7.0 high-speed 10.0 high-speed G fuse inserts 5 x 30 mm 2.0 fast (500 V~/0.032...6.3 A). 4.0 fast Available from Wickmann-Werke GmbH, 5.0 fast Annastr. 113, 5810 Witten 6, Tel. 02302/6620 6.3 fast Brass insert Gauge piece 3A 5A 7A 10 A Amp. Colour 2 rosa 4 braun 6 grun 10 20 25 35 50 10 16 20 rot blue gelb schwarz wei rot grey blue D fuse inserts 2 3 4 10 Rated voltage E 14/2 E 14/4 E 14/6 E 14/10 E 14/16 2 3 4 10 18/20 18/25 18/35 18/50 380 V 013740 013750 032830 032840 032850 10 10 10 10 10 Rated voltage E 18/20 E 18/25 E 18/35 E 18/50 E 18/63 SK 033941 20 SK 035931 FW 5 FS 5 047346 047356 FW 5 FS 5 047346 047356 Screw cap (spare) SK (5 x 30) 028200 SK (11/4 x 1/4") 042890 Marking tags Print Consecutive horizontal FW 5 047346 vertical Printed FS 5 047356 For further accessories see section 3, further marking material see section 8 * For TS 32 only ** Also for 440 V~ with Neozed marine fuse *** Current for overload up to 10 A, for short-circuit up to 25 A 2/90 3) 4) For fuse inserts 11/4 x 1/4" DEF 63 For fuse inserts 5 x 30 SAKS 2 SAKS 2/35 SAKS 4 USA SAKS 4 Frankr. Fuse terminals with fault indicator KDKS 1 ASK 1 LD Fuse cartridge 5 x 20/5 x 25 Fuse cartridge 5 x 20 only 805081 AC model Y W Y W 28/80/81,5 28/80/75 12 mm/M 4/5,5 x 1 24/75/73 24/75/66 14 mm/M 4/5,5 x 1 500 V~/10 (25) A***/10 mm2 6 kV/3 400 V~/30 A/10 mm2 6 kV/3 1,2...2,4 4 1,2...2,4 4 0,5...16 0,5...10 0,5...10 0,5...10 B6 (QL 2...5) 47 (QL 6...10) 36 0,5...16 1,5...10 0,5...10 0,5...10 B6 (QL 2...5) 47 (QL 6...10) 36 600 V/25 A/22...8 AWG Y Qty. W 020682 20 Diazed E 16 Type TW HP (2,0) QL QL QL QL 2 3 4 10 Qty. 136872 20 136870 20 Cat. No. Qty. 060700* 20 020780 020790 020800 033890 20 20 20 20 SS M 4 BS M 4x9 Gauge piece 013640 010330 100 100 P 16/10 020890 100 P 16/16 P 16/20 020900 020910 100 100 DC model QL QL QL QL Terminal width (+ 0.2 assembly tolerance) Insulation stripping length Connection data Screw connection, solid Screw connection, flexible Conductor cross-section 8 9 8 9 0,5...4 mm2 0,5...4 mm2 AWG 22...12 0,5...4 mm2 0,5...4 mm2 AWG 22...12 6,3 A 6,3 A 24...230 V (depending on terminal) 2 mA 2 mA Cat. No. Qty. 060700* 20 2 3 4 10 032800 032810 032820 033900 20 20 20 20 SS M 4 BS M 4x9 013640 010330 100 100 mm mm VDE rated data Current Voltage LED current (24...60 V) LED current (115...230 V) LED current (24...230 V) Incandescent lamp current Neon lamp current Cross-section Ordering data 24 24 48 60 115 230 V- V- V- V- V- V- - - 4 mm2 Type ASK 1 LD ASK 1 LD ASK 1 LD ASK 1 LD ASK 1 LD ASK 1 LD 24 48 60 115 230 V~ V~ V~ V~ V~ ASK ASK ASK ASK ASK 12 V-/24 20-30 V-/40-60 40-60 V-/80-120 115 V-/230 V~ V~ V~ V~ 1 1 1 1 1 LD LD LD LD LD Cat. No. Qty. 805081 25 022276 25 022526 25 022646 25 022546 25 022566 25 022286 022536 022636 022556 022576 25 25 25 25 25 Mountable on TS 32 und TS 35 Accessories Mounting rail End bracket (thickness mm) for TS 32 W for TS 35 Y End plate (thickness mm) Rated voltage 380 V E 10 A 020850 E 16 A 020860 E 20 A 020870 E 25 A 020880 Warning: In the event of a faulty fuse, the connection system is live. Dimensions 600 V/30 A/20...8 AWG 600 V/30 A/22...8 AWG Y Qty. W Qty. 0321421) 20 0502021) 20 0162222) 20 0178222) 20 10,3 x 38,1 Type TW HP (2,0) Warning: In the event of a faulty fuse, the connection system is live. Cross-connection bridges Type QB 25 25 25 25 straight angled 028411 FW 5 FS 5 047346 047356 20 SK 034923 SK (with spring) 016173 FW 5 FS 5 20 20 Cat. No. Qty. KDKS 1 KDKS 1 814645 814895 25 25 KDKS 1 KDKS 1 814896 814894 25 25 KDKS 1 KDKS 1 814893 814892 25 25 KDKS 1 KDKS 1 814284 814891 25 25 Mountable on TS 32 und TS 35 TS 32 TS 35x7,5 TS 35x15 EWK 1 EW 35 AP PA (1,5) 012280 038340 049800 020616 038356 038036 - - - 50 50 20 QB 21) QB 31) QB 41) 046110 046120 046130 100 50 50 TH (spare) 037706 100 Fixing screw (fits QL) Disconnect lever (spare) SK 2 mA - - 4 mm2 Type TS 32 TS 35x7,5 TS 35x15 012280 038340 049800 - - - EW 35 AP KDKS 038356 950334 50 20 046110 046120 046130 054540 054530 50 50 50 - - QB QB QB QB QB 21) 31) 41) 581) 581) 047346 047356 For further accessories see section 3, further marking material see section 8 ) French version 2 ) USA version 1 1) When using QB, the rated cross-current reduces to max. 2.5 mm2 2/91 Fuse terminals with fault indicator SAKS 1 SAKS 4 SAKS 6 SAKS 7 Fuse cartridge 5 x 20/5 x 25 Fuse cartridge E14/D 01 Fuse cartridge 11/4" x 1/4" Fuse cartridge 5 x 20/5 x 25 (e.g. Neozed D 01) to DEF 63 Warning: In the event of a faulty fuse, the connected circuit is live! Warning: In the event of a faulty fuse, the connected circuit is live! Warning: In the event of a faulty fuse, the connected circuit is live! Warning: In the event of a faulty fuse, the connected circuit is live! 13 12 24 14 12 12 12 12 0,5...16 mm2 0,5...10 mm2 AWG 20...8 0,5...16 mm2 0,5...10 mm2 AWG 20...7 0,5...16 mm2 0,5...10 mm2 AWG 20...8 0,5...16 mm2 0,5...10 mm2 AWG 20...8 -/10 A 5 mA - 50 mA 0,5 mA 10 mm2 -/16 A - - - 1 mA 10 mm2 500 V~/10 A 10 A 1 mA 500 V~/10 A 10 A 1 mA 1 mA 10 mm2 1 mA 10 mm2 YTS 32 Qty. W TS 35 Qty. SAKS 1 LD 037142 10 022582 10 111122 10 111132 10 012172 10 022602 10 021392 10 021402 10 SAKS 1 GL 037172 10 017322 10 037892 10 017312 10 SAKS 1 GL 038532 10 030612 10 019992 10 SAKS 1 LD 040782 10 on request SAKS GL 038802 10 on request 038812 10 on request SAKS 1 GL 038522 10 - 030932 10 019862 10 Type Cat. No. Qty. SAKS 4 TS 32 neon lamp Voltage 115 V0 010182 10 230 V0 010192 10 380 V0 010202 10 480 V0 010212 10 Type Cat. No. Qty. SAKS 6 KrG 053182 40 for 11/4" x 1/4" to DEF 63 Type SAKS 7 KrG for 5 x 25 SAKS 7 KrG for 5 x 20 exchangeable neon lamps (please order separately) for exchangeable neon lamps (please order separately) Type TS 32 TS 35x7,5 TS 35x15 EWK 1 (8,5) EW 35 (8,5) AP KrG (3) Type TS 32 Cat. No. Qty. 012280 - Type TS 32 Cat. No. Qty. 012280 - Type TS 32 Cat. No. Qty. 012280 - EWK 1 (8,5) 020616 50 EWK 1 (8,5) 020616 50 EWK 1 (8,5) 020616 50 QL 2 QL 3 QL 4 QL 10 BS M 3x6 m. SS 019140 019150 019160 033880 034620 50 50 20 20 100 AP KrG QL 2 QL 3 QL 4 QL 10 BS M 3x6 m. SS 014672 019140 019150 019160 033880 034620 20 50 50 20 20 100 AP KrG (3) QL 2 QL 3 QL 4 QL 10 BS M 4x9 m. SS 014672 020780 020790 020800 033890 013330 20 20 20 20 20 100 Neon lamp 230 V~ 055030 Neon lamp 115 V~ 055020 - - Neon lamp 230 V~ 055030 Neon lamp 115 V~ 055020 - - Dimensions Terminal width (+ 0.2 assembly tolerance) Insulation stripping length Connection data Screw connection, solid Screw connection, flexible Conductor cross-section mm mm VDE rated data Voltage/Current LED current (24...60 V) LED current (115...230 V) Incandescent lamp current Neon lamp current Cross-section Ordering data Fuse cartridge 5 x 20 Voltage LED 24 V- 24 V~ 48 V- 48 V~ Incandescent lamp Neon lamp Fuse cartridge 5 x 25 115 V0 230 V0 LED 24 V- Incandescent lamp Neon lamp 24 V0 48 V0 24 V0 48 V0 115 V0 230 V0 Accessories Mounting rail End bracket (thickness mm) End plate (thickness mm) Cross connection brackets Type QL Cross-connection bridges Type QB Fixing screw (matches QL) Screw cap (spare) Incandescent lamp 2/92 for TS 32 W for TS 35 Y SK (5 x 20) SK (5 x 25) Cat. No. Qty. 012280 - 038340 - 049800 - 020616 50 038356 50 019132 20 028210 028200 Cat. No. Qty. 057612 40 057312 40 20 100 Fuse cartridges and gauge rings for Weidmuller fuse terminals Fuse inserts for terminal type SAKS 1 SAKS 7 ASK 1 WSI 6 Rated voltage (V~) Size (mm) Rated current (A) Cat. No. Qty. 043040 043050 043060 043900 043070 043080 043090 043100 043110 043120 043130 043140 10 10 10 10 10 10 10 10 10 10 10 10 0,25 (M) 0,5 (M) 0,8 (M) 1 (M) 10 (M)5) 2 (F) 4 (F) 6,3 (F) (M) = Med. time lag, (F) = Fast 054690 051030 064640 026580 019310 019270 019280 019290 10 10 10 10 10 10 10 10 0,5 1 2 3 5 7 10 053380 052550 029450 029570 029460 029580 029390 10 10 10 10 10 10 10 020850 020860 020870 020880 25 25 25 25 013740 013750 032830 032840 032850 036130 036140 036150 036160 036170 10 10 10 10 10 10 10 10 10 10 G-fuse inserts 5 x 20 without indicator to DIN 41660, IEC 127 Part 1 0,2 5 x 20 0,25 Breaking capacity 1500 A 0,5 (at 250 V, 50 Hz, cos : 0.7) 0,63 1,0 1,6 250 2,0 2,5 3,15 4,0 5,0 6,3 (F) = (F) (F) (F) (F) (F) (F) (F) (F) (F) (F) (F) (F) fast G-fuse inserts 5 x 25 with indicator to DIN 415761) SAKS 1 SAKS 7 WSI 6 5 x 25 m. K.1) Breaking capacity 80 A (at 250 V, 50 Hz, cos : = 1) 250 Fuse inserts 11/4" x 1/4" to DEF 63/Size 0 without indicator SAKS 32) SAKS 6 SAKS 2 SAKS 44) SAKS 5 33 kA short circuit rating fast speed E 0,5 A E 1 A 440 E 2 A E 3 A E 5 A E 7 A E 10 A D-fuse inserts E 16 with indicator to DIN 49360 (Diazed) 10 E 10 A 500 16 E 16 A 20 E 20 A 25 E 25 A D-fuse inserts E 14 Size D 01 and E 18 Size D 02 with indicator to DIN 49522 (Neozed)3) E E E E E E E E E E 14/2 14/4 14/6 14/10 14/16 18/20 18/25 18/35 18/50 18/63 Note: 380 380 2 4 6 10 16 20 25 35 50 63 1) The SIBA company also supplies 5 x 25 G fuse inserts with indicators in a shipbuilding model for 450 V AC. 5 x 30 (500 V~) fuse inserts for SAKS 3 are available from the WICKMANN company. 3) The LINDNER company also supplies Neozed fuse cartridges in an additional shipbuilding model for 440 V AC. 4) Fuse cartridges with the dimensions 1"x1/4" c 25.4x6.35 mm and 13/32"x11/2" c 10.3x38.1 mm are not included in product line. 5) Only for SAKS 1 and SAKS 7. 2 Gauge rings P P P P Gauge ring type 14/2 14/4 14/6 14/10 Amp. 2 4 6 10 Colour Pink Brown Green Red Cat. No. 013800 013810 032860 032870 Qty. 50 50 50 50 SAKS 5 und 5/35 P P P P 18/20 18/25 18/35 18/50 20 25 35 50 Blue Yellow Black White 036180 036190 036200 036210 50 50 50 50 SAKS 2 und 2/35 P 16/10 P 16/16 P 16/20 10 16 20 Red Grey Blue 020890 020900 020910 100 100 100 for terminal type SAKS 4 und 4/35 2/93 Pressure connectors SV 2 SV 3 Y Dimensions Width / length / height (mm) with TS 32 Y Test disconnect terminal blocks Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade 20/72/34,5 20/72/51,5 Tube 6 x 1 mm (internal 4 mm) 10 at = 9.81 bar Tube 6 x 1 mm (internal 4 mm) 10 at = 9.81 bar Technical data Permissible pressure Ordering data Version PA Y Cat. No. Qty. 021746 20 Y Cat. No. Qty. 028056 20 Sealing cap Type KA Cat. No. Qty. 029236 200 Type KA Cat. No. Qty. 029236 200 Elbow Type WK Cat. No. Qty. 029556 50 Type WK Cat. No. Qty. 029556 50 Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type KrG PA Without diode PA With diode PA Blue PA Orange PA with 2 StB5) KrG with 2 StB5) PA with 2 StB5) Without diode PA with 2 StB5) Blue End plate (thickness mm) KrG PA blue PA Partition (thickness mm) Cross-connection 2-pole 3-pole 4-pole 25-pole QB 4 Screwdriver for StB Size: 0,8 x 4 Diode plug (Spare) Test plug Diodenstecker (Spare) Without diode With diode 1N4007 With diode 1N4007 Marking tags See section 3 for mounting rails and end brackets 2/94 Print Consecutive horizontal vertical Printed See section 3 for mounting rails and end brackets SAKR SAKR-D DKT 4 DKT 4 V ASK 1 DLS 2 Y Y Y Y Y 6.5/42/40.5/54.5 (open) 8 mm/M 3/3,5 x 0,6 6,5/42/40,5/57 (with DLS 2) 8 mm/M 3/3,5 x 0,6 6/65/56,5/70 (open) 9 mm/M 3/3,5 x 0,6 6/65/56,5/70 (open) 9 mm/M 3/3,5 x 0,6 8/58/49 9 mm/M 3/3,5 x 0,6 400 V6)/10 A/4 mm2 6 kV/3 400 V/10 A/4 mm2 6 kV/3 400V/10 A/4 mm2 6 kV/3 400 V/10 A/4 mm2 6 kV/3 500 V/19 A/4 mm2 6 kV/3 0,5...1,0/0.5 StB 2/1 0,5...1,0/0,5 StB 2/1 0,5...1,0/0,5 StB 2/1 0,5...1,0/0,5 StB 2/1 0,5...1,0 2 0.5...4 1,5...4 0.5...4 0.5...2.5 A3 0,5...4 1,5...4 0,5...4 0,5...2,5 A3 0,5...4 1,5...4 0,5...7 0,5...2,5 A3 0,5...4 1,5...4 0,5...7 0,5...2,5 A3 0,5...4 1,5...4 0,5...4 0,5...2,5 A3 (QB 2...25) 10 (QB 2...25) 10 (QB 2...4) 10 (QB 2...4) 10 (QB 2...4) 10 300 V/10 A/26...12 AWG 300 V/10 A/26...12 AWG Y Cat. No. Qty. 041212 100 041216 100 300 V/10 A/26...12 AWG 300 V/10 A/22...12 AWG Y Cat. No. Qty. 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG Y Cat. No. Qty. 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG Y Cat. No. Qty. 300 V/15 A/12 max. AWG 300 V/6,3 A/26...12 AWG Y Cat. No. Qty. 041218 146196 041222 041226 0412961) 100 0413062) 50 0263663) 50 100 100 100 100 Type AP (1.5) AP (1.5) AP (1.5) 041228 100 Cat. No. Qty. 021132 20 021136 20 021138 20 TW HP (1.0) 029710 20 QB 24) QB 34) 048270 048280 100 50 QB 44) 048290 QB 25 blank4) 013400 50 20 068736 0546461) 100 0413162) 50 Type Cat. No. Qty. 032786 Type 50 50 Cat. No. Qty. 130486 Type 045636 100 010526 100 50 Cat. No. Qty. Type Cat. No. Qty. AP (1,5) 021136 20 AP (1,5) 068756 20 AP (1,5) 068756 20 AP (1,5) 038036 20 TW HP (1,0) 029710 20 TW HP (2,0) 060700 20 TW HP (2,0) 060700 20 TW HP (2,0) 060700 20 QB 24) QB 34) 048270 048280 100 50 QB 24) QB 34) 048270 048280 100 50 QB 24) QB 34) 048270 048280 100 50 QB 24) QB 34) 046110 046120 100 50 QB 44) 048290 QB 25 blank4) 013400 50 20 QB 44) 048290 50 QB 44) 048290 50 SDIK 902494 QB 44) 046130 50 3-pole ganging with SchS 2 marking tag carrier (Cat. No. 033740) - Contact sleeve 055330 PS 2.3 FW 6.5 FS 6.5 018040 046816 046826 20 - - PS 2.3 018040 20 DLS 2 DLS 2 ) DLS 2 ( 032106 063016 054776 50 50 50 FW 6.5 FS 6.5 046816 046826 - - 1) 2) 3) Without DLS With DLS empty With DLS 1N4007 PS 2.3 018040 20 FW 6 FS 6 046866 046876 - - 4) PS 2.3 018040 20 FW 6 FS 6 046866 046876 - - Rated cross-section is reduced to max. 2.5 mm2 when QB is used FW 5 FS 5 5) 6) 047346 047356 100 - - With DKT 4 only in upper terminal level As disconnect terminal rated voltage 250 V 2/95 Disconnect terminals SAKC 4 SAKC 4/35 Dimensions Width / length / height (mm) with TS 32 Y Width / length / height (mm) with TS 35 x 7,5 W Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type KrG KrS With 2 StB KrG With 1 StB KrG With 2 StB KrS End plate (thickness mm) KrG KrS PA SAKC 10 SAKC 10/35 Y Y W W SAKA 10 SAKB 10 Y Y 6,5/40/51,5/67 6,5/49,5/42,5/59,5 12 mm/M 3/3,5 x 0,6 12/65/52,5/70,5 12/65/66 12 mm/M 4/5,5 x 1,0 12/82/55,5 12 mm/M 4/5,5 x 1,0 10/65/52,5 12 mm/M 4/5,5 x 1,0 400 V/25 A/4 mm2 6 kV/3 500 V/27 A/10 mm2 6 kV/3 500 V/47 A/10 mm2 6 kV/3 500 V/63 A/10 mm2 6 kV/3 0,5...1,0/0,5 StB 2/1 1,2...2,4 4 1,2...2,4 4 1,2...2,4 4 0,5...6 1,5...4 0,5...4 0,5...4 A4 0,5...16 1,5...16 0,5...10 0,5...10 B6 0,5...16 1,5...16 0,5...10 0,5...10 B6 0,5...16 1,5...16 0,5...10 0,5...10 B6 (QB 2...25) 10 (QL 2...5) 47 (QL 6...10) 36 (QL 2...5) 47 (QL 6...10) 36 (QL 2...5) 47 (QL 6...10) 36 300 V/-/22...12 AWG 300 V/25 A/22...10 AWG Y Qty. W Qty. 034072 100 035752 100 300 V/25 600 V/25 Y 032402 600 V/-/18...8 AWG 600 V/35 A/18...8 AWG Y Cat. No. Qty. 013412 25 600 V/-/18...8 AWG 600 V/45 A/18...8 AWG Y Cat. No. Qty. 013492 40 034062 032412 50 032403 50 100 035762 Type AP (1,5) 100 Cat. No. Qty. 011792 20 A/22...8 AWG A/20...10 AWG Qty. W Qty. 50 140462 140452 50 50 Type AP (3,0) AP (3,0) Cat. No. Qty. 014672 20 014673 20 Type AP (3,0) Cat. No. Qty. 013422 20 Type AP (3,0) Cat. No. Qty. 014672 20 TW (3,0) TW (3,0) TW (1,5) 024292 024293 024296 20 20 20 TW (3,0) 025712 20 TW (3,0) 024292 20 QL QL QL QL 2 3 4 10 013550 013560 013570 033850 50 50 50 20 QL QL QL QL 2 3 4 10 013550 013560 013570 033850 50 50 50 20 QL QL QL QL 011410 011430 011450 033840 100 50 50 20 VH 14 029970 50 VH 23 034870 50 BS M 4 x 20 SS M 4 036280 013640 100 100 BS M 4 x 30 SS M 4 VL 2 026710 013640 013580 50 100 50 BS M 4 x 9 SS M 4 VL 2 010330 013640 013590 100 100 50 PS 4 029960 20 PS 4 029960 20 PS 4S 4 029960 20 StB 13.5 013520 50 StB 13,5 013520 50 StB 16 014020 50 TST 10 046270 20 FW 6.5 FS 6.5 046816 046826 - - FW 5 FS 5 047346 047356 - - FW 5 FS 5 047346 047356 - - Partition (thickness mm) KrG KrS PA HP TW (1,5) TW (1,0) 013016 20 029710** 20 QB 21) QB 31) QB 41) 048270 048280 048290 100 50 50 QB 25 blank1) 013400 20 Cross-connection 1-pole 3-pole 4-pole 10-pole 25-pole QL VH QB 4 BS SS M4 2 3 4 10 VH Dummy plug made from plastic, to keep the place of an extracted plug BST 4 green BST 4 red BST 4 blue 133905 133906 133908 500 500 500 PS 2.3 018040 20 Test plug/Socket PS 4 StB Plug-test socket (without using QL) Disconnector plug (spare) TST 4 138060 20 ZI WE 062306 10 Print Consecutive horizontal FW 6.5 046816 vertical Printed FS 6.5 046826 For further accessories see section 3, further marking material see section 8 - - Extraction tool for TST 4 Marking tags * The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used 2/96 Test disconnect terminal blocks SAKT 1/LT SAKT 1/DU 1 Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type Closed back wall KrG Open back wall KrG 4 StB 14 KrG 60 V* 1 StB 2 KrG 1 StB 2.3 KrG 2 StB 14 KrG 2 StB 2.3 KrG PA 2 StB PA End plate/partition/small partition (thickness mm) KrG KrG SAKT 1/QT 1 SAKT 2/LT Y Y Y 8/65/52.5 12 mm/M 3,5/4,0 x 0,8 8/65/52.5 12 mm/M 3,5/4,0 x 0,8 8/65/52.5 12 mm/M 3,5/4,0 x 0,8 8/82/52,5 12 mm/M 3,5/4,0 x 0,8 400 V/27 A/6 mm2 6 kV/3 400 V/27 A/6 mm2 6 kV/3 400 V/27 A/6 mm2 6 kV/3 400 V/27 A/6 mm2 6 kV/3 0,8...1,6 3 0,8...1,6 3 0,8...1,6 3 0,8...1,6 3 0.5...10 1,5...10 0.5...6 0.5...8 A5 0.5...10 1,5...10 0.5...6 0.5...8 A5 0.5...10 1,5...10 0.5...6 0.5...6 A5 0,5...10 1,5...10 0,5...6 0,5...6 A5 (QL 2...5) 47 (QL 6...10) 36 (QL 2...5) 47 (QL 6...10) 36 (QL 2...5) (QL 6...10) (QL 2...5) 47 (QL 6...10) 36 300 V/25 A/26...8 AWG 300 V/25 A/26...8 AWG Y Cat. No. Qty. 026912 50 300 V/25 A/26...8 AWG 300 V/25 A/26...8 AWG Y Cat. No. Qty. 055042 50 019562 50 300 V/25 A/26...8 AWG 300 V/25 A/26...8 AWG Y Cat. No. Qty. 049482 50 026932 50 300 V/25 A/26...8 AWG 300 V/25 A/26...8 AWG Y Cat. No. Qty. 044542 50 043792 50 Type AP (3.0) TW (3.0) Cat. No. Qty. 014672 20 024292 20 Type AP (3.0) TW (3.0) Cat. No. Qty. 014672 20 024292 20 Type AP (3.0) TW (3.0) Cat. No. Qty. 014672 20 024292 20 AP (1.5) TW (1.5) TW (0.5) TSch 2 014676 024296 047470 035366 20 20 20 100 AP (1.5) TW (1.5) TW (0.5) TSch 2 014676 024296 047470 035366 20 20 20 100 AP (1.5) TW (1.5) TW (0.5) TSch 2 014676 024296 047470 035366 20 20 20 100 QL 2 QL 3 019430 019440 50 50 QL 2 QL 3 019430 019440 50 50 QL 2 QL 3 019430 019440 50 50 QL 4 QL 10 VH 12 BS M 3x20 Cu QS 2 QVSK 2 QVS 3 QVS 4 VH 19 BS 25 blank 019450 033830 024900 037710 027096 167036 032930 030740 031800 033470 50 20 100 100 20 20 20 20 50 50 QL 4 QL 10 VH 12 BS M 3x20 Cu QS 2 QVSK 2 QVS 3 QVS 4 VH 19 BS 25 blank 019450 033830 024900 037710 027096 167036 032930 030740 031800 033470 50 20 100 100 20 20 20 20 50 50 QL 4 QL 10 VH 12 BS M 3x20 Cu QS 2 QVSK 2 QVS 3 QVS 4 VH 19 BS 25 blank 019450 033830 024900 037710 027096 167036 032930 030740 031800 033470 50 20 100 100 20 20 20 20 50 50 QB QB QB QB 2 3 4 10 020570 020580 020590 034380 50 50 50 20 QB QB QB QB 2 3 4 10 020570 020580 020590 034380 50 50 50 20 QB QB QB QB 2 3 4 10 020570 020580 020590 034380 50 50 50 20 SSP 3 053176 100 SSP 3 053176 100 SSP 3 053176 100 FW 6.5 FS 6.5 046816 046826 - - FW 6.5 FS 6.5 046816 046826 - - FW 6.5 FS 6.5 046816 046826 - - Type AP (2,5) TW (2,5) 043772 50 033062 50 Cat. No. Qty. 032912 20 035182 20 AP PA PA HP TSch 2 Cross-connection TW (0,5) QL 2 QL 3 QL 4 VH 12 QVSK 2 VH 19 BS 25 blank QVS 3 QVS 4 QS 2 TSch 2 035366 TSch 2 Orange 013246 100 100 QL 2 QL 3 019430 019440 50 50 QL 4 QL 10 VH 12 BS M 3x20 Cu QS 2 QVSK 2 QVS 3 QVS 4 VH 19 BS 25 blank 019450 033830 024900 037710 027096 167036 032930 030740 031800 033470 50 20 100 100 20 20 20 20 50 50 QB QB QB QB 2 3 4 10 020570 020580 020590 034380 50 50 50 20 SSP 3 053176 100 FW 6.5 FS 6.5 046816 046826 - - Switchable cross-connection link Disconnect lock Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 2/97 Test disconnect terminal blocks SAKT 4/LT SAKT 4/DU Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2...5-pole A Continuous current rating of cross-connection 6...10-pole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Type Closed back wall KrG Open back wall KrG 4 StB 14 KrG 60 V* 1 StB 2 KrG 1 StB 2.3 KrG 2 StB 14 KrG 2 StB 2.3 KrG PA 2 StB PA End plate / partition/Small partition (thickness mm) KrG KrG Y 6/57,5/42,5 10 mm/M 2,5/4,0 x 0,8 6/57,5/42,5 10 mm/M 2,5/4,0 x 0,8 400 V/27 A/4 mm2 6 kV/3 400 V/27 A/4 mm2 6 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...6 1,5...4 0,5...4 0,5...4 A3 0,5...6 1,5...4 0,5...4 0,5...4 A3 (Q 2...10) 27 (Q 2...10) 27 300 V/20 A/22...12 AWG 300 V/-/26...10 AWG Y Cat. No. Qty. 025412 50 300 V/20 A/22...12 AWG 300 V/-/26...10 AWG Y Cat. No. Qty. 024632 50 StB left StB left StB o 2,0 025422 025432 031032 025442 StB left StB o 2,0 024652 024662 Type AP (1,5) Cat. No. Qty. 024492 20 Type AP (1,5) Cat. No. Qty. 024492 20 TW (0,5) TSch 2 047470 035366 20 100 TW (0,5) TSch 2 047470 035366 20 100 QL 2 QL 3 015590 015600 100 100 QL 2 QL 3 015590 015600 100 100 QL 4 QL 10 VH 8 BS M 3x15 Cu 015610 033810 026670 037720 50 20 100 100 QL 4 QL 10 VH 8 BS M 3x15 Cu 015610 033810 026670 037720 50 20 100 100 QVS 2 131926 20 QVS 2 131926 20 VH 16 BS M 3 x 22 030970 131990 50 50 VH 16 BS M 3 x 22 030970 131990 50 50 SSP 4 131936 20 SSP 4 131936 20 FW 6.5 FS 6.5 046816 046826 - - FW 6.5 FS 6.5 046816 046826 - - 50 50 50 50 50 50 AP PA PA HP TSch 2 Cross-connection TW (0,5) QL 2 QL 3 QL 4 VH 12 QVSK 2 VH 19 BS 25 blank QVS 3 QVS 4 QS 2 Switchable cross-connection link Disconnect lock Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 2/98 Feed-through terminals with tab connection AST 1 AST 3 AST 4 AST 5 Disconnect terminals with tab connection Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Slotted KrG Blue, slotted KrG Slotted PA Unslotted KrG Blue, unslottedKrG Unslotted PA Block of 10, slotted with marrking 1-9 PA End plate/partition/small partition (thickness mm) AP KrG Blue KrG PA PA HP TSch 1 HP Only for PA TW Y Y Y 6,5/58/53,5 6,5/40/47,5 6,5/40/47,5 9 mm/M 2,5/3,5 x 0,6 6,5/58/53,5 12 mm/M 3/3,5 x 0,6 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V1)/ - /2,5/1,0 mm2 6 kV/3 500 V1)/ - /2,5/1,0 mm2 6 kV/3 0,4...0,7 1 0,5...1,0 2 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 A3 0,5...6 1,5...2,5 0,5...4 0,5...4 A4 (QL 2...10) 36 (QL 2...10) 36 (QL 2...10) 36 (QL 2...10) 36 300 V/13 A/- 300 V/16 A/- Y 300 V/13 A/- 300 V/16 A/- Y 300 V/13 A/22...12 AWG 300 V/16 A/24...12 AWG Y Cat. No. Qty. 043912 100 300 V/13 A/22...12 AWG 300 V/16 A/24...12 AWG Y Cat. No. Qty. 047922 50 Cat. No. Qty. 047822 50 Cat. No. Qty. 044242 100 0478262) 026632 50 50 0236862) 100 029802 100 023726 032122 100 100 047926 033452 50 50 0266362) 50 0236762) 100 023716 100 033456 50 Type AP (3,0) Cat. No. Qty. 026642 20 Type AP (3,0) Cat. No. Qty. 029812 20 Type AP (3,0) Cat. No. Qty. 029812 20 Type AP (3,0) Cat. No. Qty. 026642 20 AP (1,5) 026646 20 AP (1,5) TW (1,5) TW (1,0) 046056 013016 029710 20 20 20 20 20 20 100 20 20 20 026646 047470 060700 031916 046056 013016 029710 AP (1,5) TW (0,5) TW (2,0) TSch 1 AP (1,5) TW (1,5) TW (1,0) TSch 1 031916 100 TSch 1 031916 100 TW (1,0) TW (2,0) TSch 1 047470 060700 031916 20 20 100 Q Q Q Q 033670 033680 033690 036880 50 50 50 20 Q Q Q Q 033670 033680 033690 036880 50 50 50 20 Q Q Q Q 033670 033680 033690 036880 50 50 50 20 Q Q Q Q 2 3 4 10 033670 033680 033690 036880 50 50 50 20 016586 016596 019036 016606 016616 100 50 50 50 50 016586 016596 019036 016606 016616 100 50 50 50 50 Cross-connection 2-pole 3-pole 4-pole 10-pole 25-pole QL 2 3 4 10 2 3 4 10 2 3 4 10 QB 4 BS M 3 x 4,5 BS M 3 x 24 Plug adapter clips into PA version of AST 3 and AST 4 only 2-pole 3-pole 4-pole 5-pole 8-pole STA STA STA STA STA 2.5/2 2.5/3 2.5/4 2.5/5 2.5/8 STA STA STA STA STA 2.5/2 2.5/3 2.5/4 2.5/5 2.5/8 Test plug/Socket Plug-test socket without using QL for TS 32 PS StB StB 14 016860 50 StB 14 016860 50 StB 14 016860 50 StB 14 016860 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 IH 6.3 038606 038626 100 100 FW 6 046866 - FW 6.5 046816 - Insulation sleeve Marking tags Print Consecutive horizontal FW 6.5 046816 - FW 6 046866 Consecutive vertical For further accessories see section 3, further marking material see section 8 1) with Insulation sleeve 2) Shock-proof with ADP4 cover profile (see page 3/23) - 2/99 Feed-through terminals with tab connection SAK 4 S SAK 4 SS SAKR F Disconnect terminals with tab connection Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Slotted KrG Blue, slotted KrG Slotted PA Unslotted KrG Blue, unslottedKrG Unslotted PA Block of 10, slotted with marrking 1-9 PA End plate/partition/small partition (thickness mm) AP KrG blue KrG PA PA HP TSch 1 HP Only for PA TW Y Y 6,5/40/51,5 12 mm/M 3/3,5 x 0,6 6,5/40/51,5 6,5/42/40,5/54,5 (open) 8 mm/M 3/3,5 x 0,6 500 V/16 A/2,5/1,0 mm2 6 kV/3 500 V/16 A/2,5/1,0 mm2 6 kV/3 250 V/10 A/4/1,0 mm2 6 kV/3 0,5...1,0 2 0,5...1,0 1 0,33...6 1,5...4 0,5...4 0,5...4 A4 0,5...4 1,5...4 0,5...4 0,5...2,5 A3 (QL 2...10) 36 (QL 2...10) 36 300 V/13 A/26...12 AWG 300 V/13 A/26...12 AWG Y Cat. No. Qty. 040122 100 300 V/13 A/18...14 AWG 300 V/13 A/18...14 AWG Y Cat. No. Qty. 047962 100 047967 100 047966 100 035292 100 035297 100 040126 047952 100 100 Type AP (1,5) Cat. No. Qty. 011792 20 AP (1,5) AP (1,5) TW (1,0) 011796 013016 029710 20 20 20 QL QL QL QL 013060 013070 013080 033820 100 100 50 20 (QB 2...25) 10 Type AP (1,5) AP (1,5) AP (1,5) TW (1,5) TW (1,0) Cat. No. Qty. 011792 20 011797 20 011796 20 013016 20 029710 20 QL QL QL QL 013060 013070 013080 033820 300 V/15 A/26...10 AWG Y Cat. No. Qty. 066366 100 with 1 StB 6 Type Cat. No. Qty. AP (1,5) 021136 20 TW (1,0) 029710 20 QB 2* QB 3* QB 4* 048270 048280 048290 100 50 50 QB 25 blank* 013400 20 PS 2.3 018040 20 IH 2.8 038606 200 FW 6.5 046816 - Cross-connection 2-pole 3-pole 4-pole 10-pole 25-pole QL 2 3 4 10 2 3 4 10 100 100 50 20 QB 4 BS M 3x4,5 BS M 3 x 4,5 159321 100 BS M 3x4,5 159321 100 BS M 3 x 24 Plug adapter clips into PA version of AST 3 and AST 4 only 2-pole 3-pole 4-pole 5-pole 8-pole Test plug/Socket Plug-test socket without using QL for TS 32 PS StB Insulation sleeve IH 2.8 IH 6.3 038606 038626 Print Consecutive horizontal FW 6.5 046816 Consecutive vertical For further accessories see section 3, further marking material see section 8 100 100 IH 2.8 IH 6.3 038606 038626 100 100 FW 6.5 046816 - Marking tags 1) 2/100 With insulation sleeve - * The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used Feed-through terminals with tab connection DK 4 S DK 4 S Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data 2,8 only Y 6/54/59,5 9 mm/M 3/3,5 x 0,6 6/54/59,5 9 mm/M 3/3,5 x 0,6 400 V1)/2 x 10/4/1,0 mm2 6 kV/3 400 V1)/2 x 10/4/2,5/1,0 mm2 6 kV/3 0,5...1,0 2 0,5...1,0 2 0,5...4 1,5...4 0,5...4 0,5...4 A3 0,5...4 1,5...4 0,5...4 0,5...4 A3 (QL 2...10) 20 (QL 2...10) 20 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG Y Cat. No. Qty. 063126 100 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG Y Cat. No. Qty. 063116 100 PA Type AP (1,5) Cat. No. Qty. 063136 20 Type AP (1,5) Cat. No. Qty. 063136 20 HP TW HP (2,0) 060700 20 TW HP (2,0) 060700 20 TSch 6 019026 100 TSch 6 019026 100 Q Q Q Q 2 3 4 10 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 2 3 4 10 033640 033650 033660 036860 50 50 50 20 StB 8.5 021570 50 StB 8.5 021570 50 PS 2.3 018040 20 PS 2.3 018040 20 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 038606 100 FW 6 046866 - Nm mm2 mm2 mm2 mm2 Size A A UL CSA Version PA End plate (thickness mm) Partition Small partition TSch 6 Cross-connection 2-pole 3-pole 4-pole 10-pole Q3 Test plug/Socket Plug-test socket without using QL Plug-test socket for use with QL PS StB Insulation sleeve Marking tags Print Consecutive horizontal FW 6 046866 Consecutive vertical For further accessories see section 3, further marking material see section 8 1 - ) with Insulation sleeve 2/101 Feed-through terminals for wrap termination DIN 41 611, Part 2 and for spring clip termination DIN 41 611, Part 4 SAK 2.5 T SAK 2.5 T SAK 2.5 T Pin 1 x 1 Pin 0,8 x 1,6 Pin 0,8 x 2,4 Y Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering information Pin Right Horizontal left Horizontal right Vertical left Horizontal Vertical Vertical right assembly assembly 2x vertical right Y 6/36,5/47,5/67 12 mm/M 2,5/3,5 x 0,6 6/36,5/47,5/62 12 mm/M 2,5/3,5 x 0,6 6/36,5/47,5/69 12 mm/M 2,5/3,5 x 0,6 250 V/8 A/2,5 mm2 4 kV/3 250 V/10 A/2,5 mm2 4 kV/3 250 V/10 A/2,5 mm2 4 kV/3 Nm 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 mm2 mm2 mm2 mm2 Size 0,5...6 0,5...2,5 0,5...4 0,5...2,5 A3 0,5...6 0,5...2,5 0,5...4 0,5...2,5 A3 0,5...6 0,5...2,5 0,5...4 0,5...2,5 A3 (Q 2...10) 27 (Q 2...10) 27 (Q 2...10) 27 300 V/10 A/22...12 AWG Y Cat. No. Qty. 010852 100 300 V/10 A/22...12 AWG Y Cat. No. Qty. 300 V/10 A/22...12 AWG Y Cat. No. Qty. A A UL CSA Version KrG KrG KrG KrG KrG KrG 051842 048592 047882 069362 068702 037102 100 100 048502 100 0108561) 100 PA End plate (thickness mm) 100 100 100 100 Type AP (1,5) Cat. No. Qty. 027952 20 Type AP (1,5) Cat. No. Qty. 027952 20 Type AP (1,5) Cat. No. Qty. 027952 20 AP (1,5) 027956 20 AP (1,5) 027956 20 AP (1,5) 027956 20 TW (2,5) 030282 20 TW (2,5) 030282 20 TW (2,5) 030282 20 TW (1,5) TW (0,5) TW (2,0) 030286 019710 060700 20 20 20 TW (1,5) TW (0,5) TW (2,0) 030286 019710 060700 20 20 20 TW (1,5) TW (0,5) TW (2,0) 030286 019710 060700 20 20 20 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 StB 8.5 (o 2,3) 028060 50 StB 8.5 (o 2,3) 028060 50 StB 8.5 (o 2,3) 028060 50 PS 2.3 018040 Print Consecutive horizontal FW 6 046866 Consecutive vertical For further accessories see section 3, further marking material see section 8 20 PS 2.3 018040 20 PS 2.3 018040 20 FW 6 046866 - FW 6 046866 - KrG PA Partition (thickness mm) KrG PA HP HP Small partition Cross-connection 2-pole 3-pole 4-pole 10-pole 2 3 4 10 2 3 4 10 2** 3** 4** 10** Test plug/Socket Plug-test socket without using QL PS StB Marking tags 2) 2/102 - Shock-proof with ADP4 cover profile (see page 3/23) ** not for type 2x vertical Feed-through terminals DK 4 T DK 4 T DK 4 T SAKRT Disconnect terminals for wrap connection DIN 41 611, Part 2 and for spring clip connection DIN 41 611, Part 4 Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 Plug gauge according to 947-1 Size Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering information Pin Type Right PA Left PA Horizontal right PA Horizontal right Blue PA Vertical right PA Vertical right Blue PA Vertical PA Vertical left PA DK 4 QT bridgeable on both Right PA levels Horizontal right PA Vertical right PA End plate / partition (thickness mm) Y Y Y 6/50/58,5/75,5 9 mm/M 3/3,5 x 0,6 6/50/60,5/77,5 9 mm/M 3/3,5 x 0,6 6/50/67,5/84,5 9 mm/M 3/3,5 x 0,6 6/42/40,5/54,5 8 mm/M 3/3,5 x 0,6 250 V/8 A/4 mm2 4 kV/3 250 V/10 A/4 mm2 4 kV/3 250 V/10 A/4 mm2 4 kV/3 250 V/6/8 A/4 mm2 4 kV/3 0,5...1,0 1 0,5...1,0 1 0,5...1,0 1 0,5...1,0 2 0,5...4 1,5...4 0,5...4 0,5...4 A3 0,5...4 1,5...4 0,5...4 0,5...4 A3 0,5...4 1,5...4 0,5...4 0,5...4 A3 0,5...6 1,5...4 0,5...4 0,5...4 A3 (Q 2...10) 20 (Q 2...10) 20 (Q 2...10) 20 (QB 2...10) 10 - - Y - - Y - - Y - - Y Cat. No. Qty. Pin 1 x 1 058746 100 Pin 0,8 x 2,4 054506 100 Pin 0,8 x 1,6 046936 100 Cat. No. Qty. 053656 50 1398461) Cat. No. Qty. 0370461) 0370481) 0370361) 50 50 0685861) 50 Cat. No. Qty. 0527761) 50 50 1398561) 1398661) 1398761) 1398861) 50 50 50 50 Type AP (1,5) Cat. No. Qty. 035926 20 Type AP (1,5) Cat. No. Qty. 035926 20 Type AP (1,5) Cat. No. Qty. 035926 20 Type AP (1,5) Cat. No. Qty. 021136 20 AP (1,5) TW (2,0) 035928 060700 20 20 AP (1,5) TW (2,0) 035928 060700 20 20 TW (2,0) 060700 20 TW (2,0) 060700 20 TSch 4 036336 100 TSch 4 036336 100 TSch 4 036336 100 Q2 Q3 Q4 Q 10 QB 2* QB 3* QB 4* 033640 033650 033660 036860 048270 048280 048290 50 50 50 20 100 50 50 Q2 Q3 Q4 Q 10 QB 2* QB 3* QB 4* 033640 033650 033660 036860 048270 048280 048290 50 50 50 20 100 50 50 Q2 Q3 Q4 Q 10 QB 2* QB 3* QB 4* 033640 033650 033660 036860 048270 048280 048290 50 50 50 20 100 50 50 QB QB QB QB 048270 048280 048290 013400 100 50 50 20 StB 8.5 (o 2,3) 021570 50 StB 8.5 (o 2,3) 021570 50 StB 8.5 (o 2,3) 021570 50 PS 2.3 018040 Print Consecutive horizontal dekafix 6 046866 Consecutive vertical For further accessories see section 3, further marking material see section 8 20 PS 2.3 018040 20 PS 2.3 018040 20 dekafix 6 046866 - dekafix 6 046866 - PA Blue PA Small partition TSch 4 Cross-connection/Covers 2-pole 3-pole 4-pole 10-pole Q3 QB 4 25-pole 2* 3* 4* 25 blank* Test plug/Socket Plug-test socket without using QL PS StB Marking tags * The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used ** Only to be used with PA versions - 1) Shock-proof with ADP4 cover profile (see page 3/23) 2/103 Rack mounted interface system AVR 4/10 Version Block* of 10 plates fitted with pins and an empty plate which acts as the end plate. The plates can be mounted as desired for larger numbers of poles. The AVR blocks listed here are coded from 1 to 9. The 10th. plate is free for decade markings. * Block length = 72.05 mm Nominal voltage according to DIN 0110 Insulation group C Pin dimensions Grid dim. in mm mm 6.55 7.62 0.6 x 0.6 380 V~ 380 V~ 1.0 x 1.0 380 V~ 380 V~ 0.8 x 1.6 380 V~ 380 V~ 0.8 x 2.4 250 V~ 380 V~ Applications Interface system for use in 19" cabinets whose doors can only be opened outwards. Primarily decentralised arrangement, i.e. next to electronic modules. The pin arrangement allows operation from the front. The individual conductors with 8 colour codes from stranded cables can be systematically connected to 8 pins respectively. The pins are matched via a beige/yellow colour code. The block designation is performed by coordinates. Markings 1 to 9 and the decade markings are in the direction of mounting. For the markings 1 to 4 per level, see the diagram below. Side tabs assign the individual conductors to the respective level. Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data/Pin version (internal) Vertical 0.8 x 1.6 Horizontal 0.8 x 1.6 Vertical 0.8 x 2.4 Horizontal 0.8 x 2.4 0.8 x 2.4 on 1 x1 6,55/39/60/86 250 V/4/6 A 4 kV/3 Nm mm2 mm2 mm2 mm2 Size A A UL CSA - - Y Cat. No. Qty. 046376 8 046366 8 046396 8 046386 8 049796 8 Additional versions available on request Horizontal assembly Vertical assembly Plug adapter Type DSA 1 Cat. No. Qty. 057606 50 decade markings (10, 20, 30 ... etc.) Marking tags dekafix 5 FW 10, 20, 30, 40 etc. 2/104 013266 Feed-through terminals SAK 2.5/M.LS Disconnect terminals with Screen lug SAK 2.5 L SAK 2.5 LL SAKR L with solder connection Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data Y Y 6/60/46,5 12 mm/M 2,5/3,5 x 0,6 6/44,5/46,5 12 mm/M 2,5/3,5 x 0,6 6/55/46,5 6,5/50/40,5/54,5 (open) 8 mm/M 3/3,5 x 0,6 250 V/20 A/2,5/1,5 mm2 4 kV/3 250 V/20 A/2,5/1,5 mm2 4 kV/3 250 V/20 A/1,5 mm2 4 kV/3 250 V/10 A/4/1,5 mm2 4 kV/3 Nm 0,4...0,7 1 0,4...0,7 1 0,5...1,0 2/1 mm2 mm2 mm2 mm2 Size 0,5...6 0,5...2,5 0,5...4 0,5...2,5 A3 0,5...6 0,5...2,5 0,5...4 0,5...2,5 A3 0,5...4 01,5...4 ,5...4 0,5...2,5 A3 (Q 2...10) 27 (Q 2...10) 27 (Q 2...10) 27 (QB 2...25) 10 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG Y Cat. No. Qty. 030912 100 - 300 V/10 A/22...12 AWG Y Cat. No. Qty. 035142 100 035147 100 - 300 V/10 A/26...12 AWG Y Cat. No. Qty. 032362 100 032367 100 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG Y Cat. No. Qty. 0351461) 100 0323661) 100 A A UL CSA Type KrG Blue KrG KrS PA Blue PA KrG KrS PA Blue PA End plate / partition (thickness mm) KrG Blue KrG PA Blue PA PA HP HP AP Y 041236 054412* 100 054413* 100 054416*1) 100 Type AP (1,5) AP (1,5) Cat. No. Qty. 030922 20 030927 20 100 041246* 100 041248* 100 Type AP (1,5) AP (1,5) AP (1,5) Cat. No. Qty. 030922 20 030927 20 027956 20 Type AP (1,5) AP (1,5) AP (1,5) Cat. No. Qty. 030922 20 030927 20 027956 20 TW (1,5) TW (1,0) TW (2,0) 030286 029710 060700 20 20 20 TW (1,5) TW (1,0) TW (2,0) 030286 029710 060700 20 20 20 TW (1,5) TW (1,0) TW (2,0) 030286 029710 060702 20 20 20 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 Q Q Q Q 033700 033710 033720 036870 50 50 50 20 Type Cat. No. Qty. AP (1,5) AP (1,5) 0211361) 021138 20 20 TW (2,0) 060700 20 QB 2** QB 3** QB 4** 048270 048280 048290 100 50 50 QB 25 blank** 013400 20 PS 2.3 018040 20 FW 6.5 FS 6.5 046816 046826 TW Small partition Cross-connection Q3 2-pole 3-pole 4-pole 10-pole 25-pole QB 4 2 3 4 10 2 3 4 10 2 3 4 10 Test plug/Socket Plug-test socket without using QL Plug-test socket for use with QL PS StB 8.5 (o 2,3) StB 29.5 (o 4) PS 2.3 PS 4 StB 028060 013340 018040 029960 50 50 20 20 AD 4 030340 BSK M 3 x 22 012890 50 100 StB 8.5 (o 2,3) StB 29.5 (o 4) PS 2.3 PS 4 028060 013340 018040 029960 50 50 20 20 AD 4 030340 BSK M 3 x 22 012890 50 100 Cover AD 4 030340 BSK M 3 x 22 012890 50 100 Marking tags Print Consecutive horizontal FW 6 046866 FW 6 046866 Consecutive vertical FS 6 046876 FS 6 046876 For further accessories see section 3, further marking material see section 8 * Solder lug on left ** The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used FW 6 FS 6 1) 046866 046876 Shock-proof with ADP4 cover profile (see page 3/23) 2/105 Feed-through terminals SAKR L SAKR L Disconnect terminals with 1 x StB 6 with 2 StB 6 SAKR LL SAKR LL with 2 StB 6 with solder connection Y Dimensions Width / length / height (mm) with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade Y 6,5/50/40,5/54,5 (open) 8 mm/M 3/3,5 x 0,6 Y 6,5/50/40,5/54,5 (open) 8 mm/M 3/3,5 x 0,6 Y 6,5/58/40,5/54,5 (open) 6,5/58/40,5/54,5 (open) -/-/3,5 x 0,6 Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data 250 V/10 A/4/1,5 mm2 4 kV/3 250 V/10 A/4/1,5 mm2 4 kV/3 Nm 0,5...1,0 2/1 0,5...1,0 1 mm2 mm2 mm2 mm2 Size 0,5...4 1,5...4 0,5...4 0,5...2,5 A3 0,5...4 1,5...4 0,5...4 0,5...2,5 A3 (QB 2...25) 10 (QB 2...25) 10 - 300 V/10 A/22...12 AWG Y Cat. No. Qty. - - Y A A UL CSA Type KrG Blue KrG KrS PA Blue PA KrG KrS PA Blue PA End plate / partition (thickness mm) 041256 AP 250 V/10 A/1,5 mm2 4 kV/3 - 300 V/10 A/22...12 AWG Y Cat. No. Qty. - 300 V/10 A/22...12 AWG Y Cat. No. Qty. 029422 100 051816* 100 041266* 100 Type KrG Blue KrG PA Blue PA PA HP HP 100 Cat. No. Qty. 051812* 100 250 V/10 A/1,5 mm2 4 kV/3 057266 046446 046448 100 100 029426 100 100 Cat. No. Qty. Type AP (1,5) Cat. No. Qty. 021132 20 Type AP (1,5) Cat. No. Qty. 021132 20 Type AP (1,5) Cat. No. Qty. 021132 20 AP (1,5) AP (1,5) 021136 021138 20 20 AP (1,5) AP (1,5) 021136 021138 20 20 AP (1,5) AP (1,5) 021136 021138 20 20 AP (1,5) AP (1,5) 021136 021138 20 20 TW (2,0) 060700 20 TW (0,5) TW (2,0) 047470 060700 20 20 TW (0,5) TW (2,0) 047470 060700 20 20 TW (0,5) TW (2,0) 047470 060700 20 20 QB 2** QB 3** QB 4** 048270 048280 048290 100 50 50 QB 2** QB 3** QB 4** 048270 048280 048290 100 50 50 QB 25 blank** 013400 20 QB 25 blank** 013400 20 PS 2.3 20 PS 2.3 20 PS 2.3 018040 20 FW 6.5 FS 6.5 046816 046826 TW Small partition Cross-connection Q3 2-pole 3-pole 4-pole 10-pole 25-pole QB 4 Test plug/Socket Plug-test socket without using QL Plug-test socket for use with QL PS StB 018040 018040 Cover Marking tags Print Consecutive horizontal FW 6.5 046816 FW 6.5 046816 Consecutive vertical FS 6.5 046826 FS 6.5 046826 For further accessories see section 3, further marking material see section 8 * Solder lug on left ** The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used 2/106 FW 6.5 FS 6.5 046816 046826 TAL TAL Ceramic feed-through terminals 4 solder connections 2 solder connections Y SAKK 4 SAKK 10 8/40/53 11,5/40/53 12 mm/M 3/3,5 x 0,6 12 mm/M 4/5,5 x 1,0 800 V/32 A/4 mm2 800 V/57 A/10 mm2 0,5...6 mm2 0,5...4 mm2 2,5...16 mm2 2,5...10 mm2 A4 35 A/6 mm2 36 36 B6 63 A/16 mm2 47 36 600 V/30 A/22...10 AWG 600 V/36 A/26...10 AWG Type Cat. No. Qty. SAKK 4 159808 50 600 V/55 A/14...16 AWG 600 V/65 A/14...16 AWG Type Cat. No. Qty. SAKK 10 159809 50 End plate (Thickness 3 mm) Type Cat. No. AP/SAKK 4/10 950263 Qty. 10 Type Cat. No. AP/SAKK 4/10 950263 Qty. 10 Cross-connection Connecting sleeve Attachment screw Type Cat. No. QL 2 019430 QL 3 019440 QL 4 019450 QL 10 033830 VH 13,5 950946 BS (M 3 x 20) 030300 Qty. 100 100 50 20 100 100 Type Cat. No. QL 2 950947 QL 3 950948 QL 4 950949 QL 10 950950 VH 12,5 950951 BS (M 3 x 20) 030300 Qty. 100 50 50 20 50 100 Accessories Locking pin End bracket PE terminal SST 3 MEW 1/32 EK 2 for use in high temperature ranges up to max. 210 C Y 4/48/36/50 (open) Dimensions Width / length / height (mm) 4/54/36/50 (open) 63 V/10 A/1,5 mm2 1,5 kV/3 with TS 32 Y Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section 63 V/10 A/1,5 mm2 1,5 kV/3 Further technical data Clampable conductor solid mm2 stranded - - Y Cat. No. Qty. 021206 Type AP (1,5) TW (0,5) TW (1,0) 100 Cat. No. Qty. 021226 047470 029710 - - Y 20 20 20 Cat. No. Qty. 030496 Type AP (1,5) TW (0,5) TW (2,0) Plug gauge according to 947-1 Size Continuous current of cross-connection for conductor size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Ceramic 100 Cat. No. Qty. 021226 047470 060700 mm2 20 QL 2 20 20 QL 3 QL 4 015270 044560 032311 SST 3 MEW 1/32 EK 2 015270 044560 032311 Marking tags on request on request on request on request Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 2/107 TS 15 AKZ 1.5 AKZ 1.5/10 Feed-through terminals AKZ 2.5 AKZ 4 AKZ 4/10 AKZ 4 for test adapter AKZ 4/10 for test adapter PE terminals Fuse terminals Disconnect terminals W Max. Technical Data Dimensions Width / length / height (mm) 21.5 A / 2.5 with TS 15 U Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage / Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data A A UL CSA Type KrG PA Blue PA PA PA 1)Test adapter ATA 1... End plate (thickness mm) W mm2 26 A / 4 W mm2 38,5 A / 6 mm2 5/25/25 5/25,5/27 6/27/30 60/27/30 7 mm/M 2,5/3,0 x 0,5 7 mm/M 2,5/3,0 x 0,5 9 mm/M 3/3,5 x 0,6 9 mm/M 3/3,5 x 0,6 400 V/17,5 A/1,5 mm2 6 kV/3 250 V/24 A/2,5 mm2 4 kV/3 500 V/32 A/4 mm2 6 kV/3 500 V/32 A/4 mm2 6 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...1,0 2 0,5...1,0 2 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 0,2...2,5 / A 1 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4.0 / A 3 0,5...6 1,5...4 0,5...4 0,5...4 0,5...4 0,2...6.0 / A 3 0,5...6 1,5...4 0,5...4 0,5...4 0,5...4 0,2...6.0 / A 3 10 10 20 20 20 20 20 20 150 V/15 A/22...14 AWG 300 V/10 A/24...16 AWG U TS 15 Cat. No. Qty. 300 V/10 A/22...12 AWG 300 V/10 A/26...10 AWG U TS 15 Cat. No. Qty. 300V/27 A/22...12 AWG 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. 034046 034048 (10pol.w/o.mrk.)035806 (10pol.w. mrk. 035816 (with spigot) 069716 100 (with spigot) 069718 100 (without spigot) 017596 100 AKZ 2.5 with AP 038586 50 300 V/27A/22...12 AWG 300 V/10 A/24...12 AWG U TS 15 Cat. No. 029432 029436 029438 (10pol.w/o.mrk.)035956 (10pol.w. mrk.) 035966 Type 100 100 10 10 Cat. No. Qty. Type AP (1,5) 034056 50 Qty. 100 100 100 10 1 Cat. No. Qty. Type AP (1,5) Cat. No. Qty. 029442 20 069736 069738 AP (1,5) AP (1,5) 029446 029448 20 20 TW (2,0) 011890 20 TW (0,5) 034826 TSch 4 KrG PA Blue PA 38,5 A / 6 mm2 for test adapter 153826 100 w. mark./f. test ad. 148936 ATA 1, 1-pole 163253 ATA 1, 10-pole 163324 10 25 5 Type Cat. No. Qty. AP (1,5) 029446 20 50 TW (0,5) 034826 50 036336 100 TSch 4 036336 100 Q2 Q3 Q4 033640 033650 033660 50 50 50 Q2 Q3 Q4 033640 033650 033660 50 50 50 Q 10 036860 20 Q 10 036860 20 VL 2 VH 10 BS M 2,5x14 044670 044660 026680 50 100 100 VL 2 VH 10 BS M 2,5x14 044670 044660 026680 50 100 100 Marking tags can be clipped over cross-connection AD 4 030340 BSK M 2,5x18 030330 ADP 42) 137816 50 100 10 AD 4 030340 BSK M 2,5x18 030330 ADP 42) 137816 50 100 10 AP (2,5) AP (2,5) 50 50 Partition (thickness mm) KrG PA Blue PA TW (1,5) TW (1,5) 031856 031858 20 20 Small partition PA Cross-connection Q2 Q Q Q Q Q QB 4 2 3 4 5 10 036820 036830 036840 066030 036850 50 50 50 20 20 Q Q Q Q Q 2 3 4 5 10 036820 036830 036840 066030 036850 50 50 50 20 20 Switchable cross-connection link VL BS VH Cover/cover profile for shock protection* (see also on page 3/23) Test plug/Socket StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 FW 5 047346 FS 5 047356 For further accessories see section 3, further marking material see section 8 u. 8 500 500 FW 5 FS 5 047346 047356 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 StB Plug-test socket without using QL PS contact sleeve Marking tags * For PA terminals only 2/108 Print Consecutive horizontal Consecutive vertical 1) Test adapter with crimped cables available on request 2) 300 mm long AK 4 AK 4/10 AKE 2.5 AKE 4 ASK 1 SAKR with 2 sockets or with 2 clamping screws W 38,5 A / 6 AKE 4 MS W W W W mm2 60/32/34 5/28/27 7/32/34 7/27,5/30 8/58/34 6,5/42/45 9 mm/M 3/3,5 x 0,6 IEC 947-7-2 690 V**/-/4 mm2 8 kV/3 9 mm/M 3/3,5 x 0,6 9 mm/M 3/3,5 x 0,6 8 mm/M 3/3,5 x 0,6 690 V/32 A/4 mm2 8 kV/3 7 mm/M 2,5/3,0 x 0,5 IEC 947-7-2 250 V**/-/2,5 mm2 4 kV/3 -/-/4 mm2 500 V/6,3 A*/4 mm2 6 kV/3 400 V2)/10 A/4 mm2 6 kV/3 0,5...1,0 2 0,4...0,7 1 0,5...1,0 2 0,8...1,6 3 0,5...1,0 2 0,5...1,0 2 0,5...6 1,5...4 0,5...4 0,5...4 0,5...4 0,2...6.0 / A 3 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4.0 / A 3 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4.0 / A 3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,5...4.0 / A 3 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0,13...4.0 / A 3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,13...4.0 / A 3 (QB 2...4) 10 (QB 2...4) 10 300 V/10 A/22...12 AWG 300 V/6,3 A/26...12 AWG U TS 15 Cat. No. Qty. 300 V/10 A/22...12 AWG 300 V/10 A/26...12 AWG U TS 15 Cat. No. Qty. 037686 5 x 20 without indicator with 2 StB 9 mm/M 3/3,5 x 0,6 20 20 600 V/27 A/22...12 AWG 600 V/20 A/24...12 AWG U TS 15 Cat. No. Qty. 048956 100 (10pol.w/o.mrk.)036656 (10pol.w. mrk.) 046956 10 10 Type Cat. No. Qty. -/-/22...12 AWG -/-/26...12 AWG U TS 15 Cat. No. Qty. -/-/22...12 AWG -/-/26...12 AWG U TS 15 Cat. No. Qty. 130336 100 (Green/yellow) 038026 100 (Green/yellow) Type Cat. No. Qty. Type Cat. No. Qty. - -/-/22...14 AWG U TS 15 Cat. No. Qty. 021120 Type BB 3 (8,0) 036666 50 Combined AP + end bracket 50 Cat. No. Qty. Type 100 Cat. No. Qty. 046110 046120 046130 50 50 50 QB QB QB QB 036336 100 Q2 Q3 Q4 036900 036910 036920 50 50 50 QB 21) insul. QB 31) insul. QB 41) insul. Q 10 036930 20 3-pole ganging with SchS 2, marking tag carrier, clipped onto three disconnect levers (Cat. No. 033740) AD 4 030340 BSK M 2,5x18 030330 50 100 018040 20 FW 6 FS 6 046866 046876 500 500 FW 5 FS 5 **) 047346 047356 500 500 FW 6,5 FS 6,5 rated voltage between PE and feed-through to VDE 0110/1.89 046816 046826 500 500 1) Type AP (1,5) TSch 4 PS 2.3 100 20 20 50 w. clamp. scrw. 041276 038036 133176 021570 100 AP (1,5) TW/AP (1,5) StB 8.5 041286 21) insul. 31) insul. 41) insul. 251) blank Cat. No. Qty. 021136 20 048270 048280 048290 013400 50 50 50 20 contact sleeve 055330 100 PS 2.3 018040 20 FW 6.5 FS 6.5 500 500 FW 6.5 FS 6.5 046816 046826 500 500 046816 046826 The conductor cross-section * With contact sleeve 19 A for the screw connection is reduced to 2.5 mm2 when QB is used 2) As disconnect terminal, rated voltage 250 V 2/109 Feed-through terminals Tab connection Solder connection AKZ 4 SS AKZ 4 SS W Dimensions Width / length / height (mm) with TS 15 U Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data A A UL CSA Type KrG PA Blue PA PA End plate (thickness mm) PA PA Blue PA HP HP BB AKZ 4 S W 6/28,5/30,5 W 6/28,5/30,5 400 V/8 A/2,5/1 mm2 6 kV/3 AKZ 4 SF 400 V/8 A/1 mm2 6 kV/3 W 6/27/30 6/27/30 9 mm/M 3/3,5 x 0,6 9 mm/M 3/3,5 x 0,6 400 V/8 A/4/1 mm2 6 kV/3 400 V/8 A/4/1 mm2 6 kV/3 0,5...1,0 2 0,5...1,0 2 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.2...4/A 3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.2...4/A 3 Tab 6.3 und 2.8 mm Tab 2.8 mm 20 20 20 20 20 20 20 20 - 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. - 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. 150 V/20 A/22...12 AWG 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. - 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. 032456 100 036246 100 032446 100 015876 100 Type AP (1,5) Cat. No. Qty. 029446 20 Type AP (1,5) Cat. No. Qty. 029446 20 Type AP (1,5) Cat. No. Qty. 029446 20 Type AP (1,5) Cat. No. Qty. 029446 20 TW (0,5) 034826 50 TW (0,5) 034826 50 TW (0,5) 034826 50 TW (0,5) 034826 50 Q Q Q Q 036900 036910 036920 036930 50 50 50 20 Q Q Q Q 036900 036910 036920 036930 50 50 50 20 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 VL 2 VH 10 BS M 2,5x14 044670 044660 026680 50 100 100 VL 2 VH 10 BS M 2,5x14 044670 044660 026680 50 100 100 Partition (thickness mm) PA HP HP Small partition Cross-connection 2 3 4 10 2 3 4 10 2 3 4 10 2 3 4 10 Switchable cross-connection link VL Test plug/Socket BS VH Plug-test socket o 2,3 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 IH 2.8 IH 6.3 038606 038626 100 100 IH 2.8 038606 100 IH 2.8 038606 100 IH 2.8 IH 6.3 038606 038626 100 100 Print Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 PS StB Cover Insulation sleeve Marking tags * Insulation sleeves are to be used with tab connections to maintain the rated voltage. 2/110 AL 1 AKZ 1.5 L W W 6,5/32/21 0,5...1 0,5...1 Cat. No. Qty. 013732 100 AKZ 4 L AKZ 4 LL W W 5/34,5/25 400 V/16 A/1 mm2 6 kV/3 - - U TS 15 AKZ 2.5 K W 6/35,5/30 7 mm / M 2,5 / 3,0 x 0,5 5/25,9/22,6 - 7 mm / M 2,5 / 3 x 0,5 250 V/16 A/1,5 mm2 4 kV/3 250 V/17,5 A/2,5 mm2 4 kV/3 250 V/16 A/4/1,5 mm2 4 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...1,0 2 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 0,2...2,5 / A 1 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0,13...4.0 / A3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.2...4.0 / A 3 0,5...1,5 1,5 0,5...1,5 20 20 10 10 20 20 20 20 - 150 V/10 A/24...16 AWG U TS 15 Cat. No. Qty. 300 V/10 A/26...10 AWG Type Cat. No. Qty. 300 V/20 A/22...12 AWG 300 V/10 A/24...12 AWG U TS 15 Cat. No. 033482 033486 033488 300 V/20 A/22...12 AWG 300 V/10 A/24...12 AWG U TS 15 Cat. No. Qty. 034016 100 AKZ 2.5 K 069666 6/44/30 9 mm / M 3 / 3,5 x 0,6 100 250 V/16 A/1,5 mm2 4 kV/3 0,2...2,5 / - Qty. 100 100 100 034646 100 Direct mounting with BB 1, please order separately Type Cat. No. Qty. EP (1,0) 016410 EP (1.0 tropic) 016450 TW (0,5) 016680 Type AP (1,5) 046816 046826 AP (2,5) 069726 50 BB 4 (7,5) 069756 50 Type AP (1,5) AP (1,5) AP (1,5) Cat. No. Qty. 029442 20 029446 20 029448 20 TW (0,5) 034826 TSch 4 Q Q Q Q Type Cat. No. Qty. AP (1,5) 029446 20 50 TW (0,5) 034826 50 036336 100 TSch 4 036336 100 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 100 100 50 TW (0,5) Q Q Q Q FW 6.5 FS 6.5 Cat. No. Qty. 032966 20 500 500 2 3 4 10 016680 036820 036830 036840 036850 50 50 50 50 10 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 2 3 4 10 2 3 4 10 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 AD 4 030340 BSK M 2,5x18 030330 50 100 AD 4 030340 BSK M 2,5x18 030330 50 100 FW 6 FS 6 500 500 FW 6 FS 6 500 500 FW 5 FS 5 047346 047356 500 500 IH 2.8 038606 100 FW 5 FS 5 047346 047356 500 500 046866 046876 046866 046876 2/111 Feed-through terminals AKZ 1.5 T AKZ 1.5 T AKZ 1.5 T AKZ 2.5 K Screw connection Spring clip connection iaw. DIN 41611 Part 4 Wrap connection iaw. DIN/IEC 352 Part 1 W W* W W * 035786 = 45 mm Dimensions Width / length / height (mm) with TS 15 U Pin dimension mm Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering information Pin versions 0.6 x 0.6 1.0 x 1.0 0.8 x 1.6 horizontal 0.8 x 1.6 vertical Horizontal Vertical 0.8 x 2.4 horizontal assembly assembly 0.8 x 2.4 vertical 5/25/45 0,8 x 1,6 7 mm/M 2,5/3,0 x 0,5 5/25/39,5 1x1 7 mm/M 2,5/3,0 x 0,5 5/28/44 0,8 x 1,6 7 mm/M 2,5/3,0 x 0,5 5/26/46,7 0,8 x 1,6 7 mm/M 2,5/3,0 x 0,5 125 V/8 A/1,5 mm2 2,5 kV/3 125 V/8 A/1,5 mm2 2,5 kV/3 125 V/8 A/1,5 mm2 2,5 kV/3 125 V/10 A/2,5 mm2 2,5 kV/3 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,4...0,7 1 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 0.13...2.5 / A1 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 0.13...2.5 / A1 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 0.13...2.5 / A1 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.13...4.0 / A3 10 10 10 10 10 10 10 10 300 V/10 A/26...14 AWG 300 V/10 A/24...16 AWG Type Cat. No. AKZ 1.5 T 044256 AKZ 1.5 T 035796 AKZ 1.5 W 032946 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG 300 V/10 A/24...16 AWG Type Cat. No. AKZ 1.5 T 040046 AKZ 1.5 T 040036 AKZ 1.5 T 041036 300 V/10 A/26...14 AWG 300 V/10 A/26...10 AWG Type Cat. No. AKZ 2.5 K 069626 AKZ 2.5 K 069636 AKZ 2.5 K 069646 AKZ 2.5 K 069656 Qty. 100 100 100 Type AKZ 1.5 T AKZ 1.5 T Cat. No. Qty. 048366 100 035786 100 AP (1,5) 034056 Qty. 100 100 100 Qty. 100 100 100 100 End plate (thickness mm) PA AP (1,5) 034056 50 50 AP (1,5) 034056 50 AP (2,5) 069726 50 TW (1,5) 031856 20 Partition (thickness mm) PA Small partition Cross-connection 2-pole 3-pole 4-pole 10-pole Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 047346 047356 8 500 500 FW 5 FS 5 047346 047356 500 500 FW 5 FS 5 047346 047356 500 500 FW 5 FS 5 047346 047356 500 500 Q3 Switchable cross-connection link VL BS VH Test plug/Socket Plug-test socket o 2.3 mm PS StB PS 2.3 Print Consecutive horizontal FW 5 Consecutive vertical FS 5 For further accessories see section 3, further marking material see section Marking tags 2/112 AKZ 2.5 K AKZ 2.5 K W AKZ 4 T W AKZ 4 T W AKZ 4 T W AKZ 4 ST W W 5/26/46,7 0,8 x 1,6 7 mm/M 2,5/3,0 x 0,5 5/47,5/27 0,8 x 1,6 7 mm/M 2,5/3,0 x 0,5 6/27/48,5 1x1 9 mm/M 3/3,5 x 0,6 6/27/50,5 0,8 x 1,6 9 mm/M 3/3,5 x 0,6 6/27/57,8 0,8 x 2,4 9 mm/M 3/3,5 x 0,6 6/27/50,2 0,8 x 1,6 - 250 V/8 A/2,5 mm2 4 kV/3 250 V/8 A/2,5 mm2 4 kV/3 250 V/10 A/4 mm2 4 kV/3 250 V/10 A/4 mm2 4 kV/3 250 V/10 A/4 mm2 4 kV/3 250 V/10 A/2,5 mm2 4 kV/3 0,4...0,7 1 0,4...0,7 1 0,5...1,0 2 0,5...1,0 2 0,5...1,0 2 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.13...4.0 / A3 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.13...4.0 / A3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.13...4.0 / A3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.13...4.0 / A3 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.13...4.0 / A3 0.5...2.5 / - 10 10 10 10 20 20 20 20 20 20 20 20 300 V/10 A/26...14 AWG 300 V/10 A/26...10 AWG Type Cat. No. AKZ 2.5 K 069546 AKZ 2.5 K 069556 AKZ 2.5 K 069576 AKZ 2.5 K 069566 300 V/10 A/26...14 AWG 300 V/10 A/26...10 AWG Type Cat. No. AKZ 2.5 K 069586 AKZ 2.5 K 069596 AKZ 2.5 K 069606 AKZ 2.5 K 069616 300 V/10 A/26...14 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. 300 V/10 A/26...14 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. 300 V/10 A/26...14 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. - - Type Cat. No. Qty. AKZ 4 ST 043926 100 Qty. 100 100 100 100 Qty. 100 100 100 100 AKZ 4 T 044586 100 AKZ 4 T AKZ 4 T 034416 034406 100 100 AKZ 4 T AKZ 4 T 036646 046166 100 100 AP (2,5) 069726 50 AP (2,5) 069726 50 AP (1,5) 029446 20 AP (1,5) 029446 20 AP (1,5) 029446 20 AP (1,5) 029446 20 TW (1,5) 031856 20 TW (1,5) 031856 20 TW (1,5) 034826 50 TW (1,5) 034826 50 TW (1,5) 034826 50 TW (1,5) 034826 50 TSch 4 036336 100 TSch 4 036336 100 TSch 4 036336 100 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 Q Q Q Q 2 3 4 10 036900 036910 036920 036930 50 50 50 20 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 Q Q Q Q 2 3 4 10 036820 036830 036840 036850 50 50 50 20 2 3 4 10 2 3 4 10 2 3 4 10 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 StB 8.5 021570 50 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 FW 5 FS 5 047346 047356 500 500 FW 5 FS 5 047346 047356 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 2/113 Feed-through terminals for temperature measuring circuits AKZ 4/TC W Weidmullers thermocouple terminals are specially designed for transmitting the smallest voltages in temperature measuring circuits. Special busbars ensure that no false signals occur in the terminal when temperature differences exist in the positive and negative path. This high measuring precision is necessary for, e.g. test beds aircraft engines, for complicated chemical processes, control, etc. * Busbar material corresponds to thermal and compensating conductors * Clear thermocouple marking * 2-pole blocks per thermocouple * Row width 14 mm including end plate Configuration of a temperature measuring circuit 1 Thermocouple (sensor) 4 Reference point 2 Thermocouple terminals 5 Supply conductors (to and from) 3 Compensating conductor Dimensions Width / length / height (mm) with TS 15 U Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage / current / cross-section Further technical data Tightening torque range Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U stranded H07V-R flexible H07V-K flexible H07V-K and AEH DIN 46 228/1 flexible H07V-K and AEH with plastic collar Plug gauge according to 947-1 Continuous current of terminal block for conductor size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering information Version for thermocouples Type J Fe according to IEC 584 Type T Cu (DIN 43710) Type K NiCr - Ni Type E NiCr - CuNi 14/27/30 9 mm/M 3/3,5 x 0,6 -/-/4 mm2 Nm mm2 mm2 mm2 mm2 mm2 Size 0,5...1 2 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 A3 A A UL CSA U TS 15 - CuNi - CuNi End plate Cat. No. Qty. 162701 20 on request 167713 20 on request Cat. No. AP (thickness 1.5 mm) PA 029446 20 TW (thickness 0.5 mm) PA 034826 50 Print Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 500 500 6 Measuring device The thermocouple terminals displayed in this measurement circuit are used to thermoelectrically transmit thermal e.m.f. of the thermocouple to the reference point and indicating device via the thermocouple. Thermocouple terminals are required for the construction of temperature measuring circuits. Partition Technical data Thermopcouples according to IEC 584 (DIN 43 710) Busbar Constantan Iron Marking tags 2/114 Multipole terminal blocks MK 2/12 MK 10/14 MK 3/12 MK 4/16 Screw connection 103 85,5 024352 18,5 80 10 8,5 024356 Dimensions Width / length / height (mm) Insulation stripping length/clamping screw/screwdriver blade Rated data VDE 0611 Part 1 / 8.92 / IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version 2-pole 3-pole 4-pole 4-pole 6-pole 6-pole 8-pole 8-pole 10-pole 12-pole 12-pole 14-pole 16-pole 86/15/15 88,5/13,5/12 110/15/16,1 103/17/16 5 mm/M 2,5/3,5 x 0,6 6 mm/M 2,5/3,5 x 0,6 5 mm/M 2,5/3,5 x 0,6 5 mm/M 2,5/3,5 x 0,6 125 V/24 A/2,5 mm2 2,5 kV/3 125 V/24 A/2,5 mm2 2,5 kV/3 400 V/24 A/2,5 mm2 6 kV/3 400 V/24 A/2,5 mm2 6 kV/3 0,4...0,6 1 0,4...0,6 1 0,4...0,6 1 0,4...0,6 1 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,2...4.0 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,2...4.0 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,2...4.0 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,2...4.0 / A 2 300 V/10 A/24...12 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. 150 V/25 A/22...12 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. 300 V/25 A/22...12 AWG 300 V/25 A/22...12 AWG Type Cat. No. Qty. MK 3/2 KrG 027382 100 MK 3/3 KrG 027392 50 MK 3/4 KrG 027402 50 MK 3/4 PA 027406 50 MK 3/6 KrG 027422 50 MK 3/6 PA 027426 50 MK 3/8 KrG 027442 25 150 V/20 A/22...12 AWG 150 V/15 A/22...12 AWG Type Cat. No. Qty. MK 2/12 PA 024126 MK 3/10 KrG MK 3/12 KrG MK 3/12 PA 50 027462 024352 024356 20 20 20 MK 10/14 PA 037016 20 Other numbers of poles on request MK 4/16 KrG 024422 20 The MK 10/14 can be mounted with glue or with M 3 x 12 screws through the emtpy terminal point aperture *DIN EN ISO 1207 Solder tag/expansion rivet MF 2/12 SN 024176 020010 50 500 BSTb 28/12 Bottom BSTb 28/12 Top 024570 50 027850 50 BSTo 28/12 024560 50 Marking strips Printed 1 ... Unprinted BSTb BSTb BSTb BSTb 28/12 28/8 28/6 28/4 024590 029020 029000 028980 50 50 50 50 BSTb 28/16 Bottom BSTb 28/16 Top 026220 50 027870 50 BSTo BSTo BSTo BSTo 28/12 28/8 28/6 28/4 024580 028470 028950 028930 50 50 50 50 BSTo 28/16 026210 50 Printed on top on request 2/115 Multipole terminal blocks Screw/tab connection MK 5/2 KS 2...10 BK 2...12 MK 6/2...6/6 062012 KRG 062016 PA Dimensions Width / length / height (mm) Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version 2-pole 3-pole 4-pole 4-pole 6-pole 6-pole 8-pole Cover D 2 8-pole (for MK 5/2) 10-pole 12-pole Cover D 4 12-pole (for KS 4) 40/18/15,5 See table below 8 mm/M 3/4,0 x 0,8 See table below - 8 mm/M 3/4,0 x 0,8 See table below - 9 mm/M 4/4,0 x 0,8 5 mm/M 2,5/3,5 x 0,6 500 V/24 A/2,5 mm2 6 kV/3 500 V/24 A/2,5 mm2 6 kV/3 400 V/32 A/4 mm2 6 kV/3 690 V/41 A/6 mm2 8 kV/3 0,4...0,6 1 0,5...0,8 2 0,5...0,8 2 1,2...2,0 4 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0,2...4.0 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,2 0,2...4.0 / A 2 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0,33...4.0 / A 3 0,5...6 1,5...6 0,5...6 0,5...4 0,5...4 0,33...6.0 / A 3 Type MK 5/2 KrG 300 V/20 A/22...12 AWG 300 V/25 A/24...12 AWG Type Cat. No. Qty. KS 2 KrG2) 013442 100 300 V/30 A/22...10 AWG 300 V/40 A/22...10 AWG Type Cat. No. Qty. MK 6/2 KrG 062042 50 MK 6/3 KrG 062032 50 MK 6/4 KrG 062022 20 MK 6/4 PA 062026 20 MK 6/6 KrG 062012 20 MK 6/6 PA 062016 20 Cat. No. Qty. 024382 100 Cover D 2 (for MK 5/2)024406 Cover 50 KS 4 KrG2) 014032 50 300 V/10 A/22...12 AWG 300 V/10 A/22...12 AWG Type Cat. No. Qty. BK 2 KrG 019772 50 BK 3 KrG 019782 50 BK 4 KrG 019522 50 KS 6 KrG2) 014062 50 BK 6 KrG 019532 50 KS 10 KrG2) 014162 Cover D 2 (for KS 2) 013450 D 4 (for KS 4) 014050 D 6 (for KS 6) 014080 D 10 (for KS 10)014180 20 BK 12 KrG 019892 50 Marking strip 100 50 50 20 Cover Dimensions Type KS 2 KS 4 KS 6 KS 10 Dimensions a 42 66 90 138 b 32 56 80 128 Dimens. Length/attachment dim Type BK 2 BK 3 BK 4 BK 6 BK 12 a 20 31 38 52 92 b - 11 18 32 72,5 SN 020010 500 BSTb 28/2 BSTb 28/3 BSTb 28/4 BSTb 28/6 BSTb 28/12 BSTo 28/2 BSTo 28/3 BSTo 28/4 BSTo 28/6 BSTo 28/12 020360 020380 019730 019750 019880 020350 020370 019720 019740 019870 50 50 50 50 50 50 50 50 50 50 Type MK 6/2 MK 6/3 MK 6/4 MK 6/6 KRG PA 23,5 36,5 13 49,5 26 26 75,5 25 52 Expansion rivet Marking strips 2/116 Printed 1 ... ELSb ELSb ELSb ELSb 2 4 6 10 014320 014330 014340 014350 50 50 50 50 Unprinted ELSo ELSo ELSo ELSo 2 4 6 10 014280 014290 014300 014310 50 50 50 50 BSTb 28/6 1) Projecting length = 1 mm. To be considered for the last terminal in a row! Printed on top on request 2) Please order cover and marking strips separately. 030460 50 MDM 10/1 MF 1/6...1/12 SLS 2/2 SLS 2/4 Max. Technical Data Dimensions Width / length / height (mm) 63 A / 10 mm2 10/45/34,5 See table below See below Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size 12 mm/M 4/5,5 x 1,0 - 8 mm/M 3,5/4,0 x 0,8 800 V/57 A/10 mm2 8 kV/3 400 V/16 A/2,5/1 mm2 6 kV/3 400 V/16 A/4 mm2 6 kV/3 Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data 47 36 A A UL CSA PA 1,2...2,4 4 0,8...1,6 3 1,5...16 1,5...10 1,5...10 1,5...10 1,5...10 1.5...16 / B 6 - 600 V/65 A/22...6 AWG 600 V/55 A/22...6 AWG Type Cat. No. Qty. MDM 10/1 912616 50 Direct mounting with an MB left and MB right 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.33...4.0 / A 3 300 V/10 A/24...12 AWG 300 V/10 A/22...10 AWG Type Cat. No. Qty. MF 1/6 KrG2) 047972 100 MF 1/6 KrG3) 048002 100 MF 1/8 KrG2) 047982 50 MF 1/8 KrG3) 048012 50 MF 1/12 KrG2) 047992 50 MF 1/12 KrG3) 048022 50 Screw/plug 6,3 x 0,8 Type Cat. No. Qty. SLS 2/2 KrG 021342 100 SLS 2/4 KrG SLS 2/4 KrG Slotted 024042 048032 50 50 IH 2.8 IH 6.3 038606 038626 100 100 Attachment bracket MB left MB right BS M 4 x 20 SS M 4 912526 912536 036280 013640 20 20 100 100 TSch 1 031916 100 Q Q Q Q 045710 045720 045730 045740 50 50 50 20 VL 2 VH 19 BS M 3 x 25 013590 028510 029250 50 50 100 StB 14 PS 4 016990 029960 50 20 AD 4 017860 BSK M 3 x 22 012890 50 100 Small partition Cross-connection Q3 2 3 4 10 Switchable cross-connection link VL BS Test plug/Socket/Insulation sleeve PS StB IH Dimensions Type a b MF 1/6 52 34 MF 1/8 68 50 MF 1/12 113+0,5 102 c d 9,5 6,5 9,5 6,5 8 7,5 VH IH 2.8 IH 6.3 SN 038606 038626 020010 100 100 500 BSTb 10/6 BSTb 10/8 BSTb 10/12 024090 024110 020950 50 50 50 BSTo 10/6 BSTo 10/8 BSTo 10/12 024080 024100 020940 50 50 100 Cover/marking strips Marking material Consecutive horizontal FW 6 046866 Consecutive vertical FS 6 046876 For further accessories see section 3, further marking material see section 8 500 500 * Insulation sleeves are to be used for tab connections to maintain the rated voltage. 2) 3) Single tab Double tab 2/117 Multipole terminal blocks MKL 2/12 MF 2/12 MKL 3/12 MKL 4/16 Screw, solder, tab connection 024186 024362 026202 024176 024992 024432 Dimensions Width / length / height (mm) 88/23/15 75/24/6 110/23/16 103/24/16,5 Insulation stripping length/clamping screw/screwdriver blade 5 mm/M 2,5/3,5 x 0,6 5 mm 5mm/M 2,5/3,5 x 0,6 5mm/M 2,5/3,5 x 0,6 125 V/20 A/2,5/1,5/1 mm2 2,5 kV/3 63 V/17,5 A/1,5/1 mm2 1,5 kV/3 400 V* / 20 A / 2,5 / 1,5 / 1 mm2 6 kV/3 400 V/20 A/2,5/1,5/1 mm2 6 kV/3 0,4...0,6 1 0,4...0,6 1 0,4...0,6 1 0,5...2,5 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.2...2.5 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0.33...4.0 / A 2 0,5...4 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0.33...4.0 / A 2 300 V/10 A/24...12 AWG 300 V/10 A/24...12 AWG Type Cat. No. Qty. 300 V/25 A/22...12 AWG 300 V/25 A/22...12 AWG Type Cat. No. MKL 3/2 KrG 027492** MKL 3/4 KrG 027512** MKL 3/6 KrG 027532** MKL 3/12 KrG 024362** 300 V/25 A/22...12 AWG 150 V/15 A/22...12 AWG Type Cat. No. Qty. Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Horizontal 2-pole Other numbers of poles available on request 4-pole 6-pole 12-pole 16-pole Vertical Other numbers of poles available on request MKL 2/12 PA 024136 Type Cat. No. Qty. 50 2-pole 4-pole 6-pole 12-pole 16-pole MKL 3/2 KrG MF 2/12 PA MF 2/12 PA 024186 024176 MKL 4/16 KrG 0262021) 20 MKL 4/16 KrG 024432 20 027602* 100 MKL 3/6 KrG 027642* MKL 3/12 KrG 024992* double-sided 2.8 x 0.8 single-sided 0.8 x 1.6/2.8 x 0.8 Qty. 100 100 50 20 50 20 50 50 * For terminals mounted directly next to each other, the rated voltage is reduced to 250 V. ** Rated voltage 250 V. For terminals mounted directly next to each other, the rated voltage is reduced to 125 V. Expansion rivet/insulating sleeve SN 020010 500 IH IH 2.8 038606 100 Marking strips Printed 1 ... unbedruckt BSTb 28/12 Bottom Top 024570 50 027850 50 BSTo 28/12 024560 50 BSTb 28/4 BSTb 28/6 BSTb 28/12 028980 029000 024590 50 50 50 BSTb 28/16 unten oben 026220 50 027870 50 BSTo 28/4 BSTo 28/6 BSTo 28/12 028930 028950 024580 50 50 50 BSTo 28/16 026210 50 For further accessories see section 3, further marking material see section 8 * Insulation sleeves are to be used for tab connections to maintain the rated voltage. 2/118 ) Rated voltage 250 V 1 Multipole terminal blocks Screw, solder, tab connection Modular design AKB 4 AKZ 2.5 Max. Technical Data Dimensions Width / length / height (mm) 32 A / 4 mm2 26 A / 2.5 mm2 6/27/23 - 9 mm/M 3/3,5 x 0,6 5/25,5/22,6 - 7 mm/M 2,5/3 x 0,5 8/58/30,5 - 9 mm/M 3/3,5 x 0,6 400 V/32 A/4 mm2 6 kV/3 250 V/24 A/2,5 mm2 4 kV/3 500 V/6,3 A*/4 mm2 6 kV/3 0,5...1,0 2 0,4...0,7 1 0,5...1,0 2 0,5...4 1,5...4 0,5...4 0,5...4 0,5...4 0.33...4.0 / A3 0,5...4 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.13...4.0 / A3 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0.13...4.0 / A3 20 20 10 10 (QB 2...4) 10 300/250 V/27 A/22...12 AWG 300 V/10 A/22...12 AWG Type Cat. No. Qty. AKB 4 PA 032156 100 032158 100 Direct mounting with BB 1, please order separately 300 V/10 A/26...10 AWG Type Cat. No. Qty. AKZ 2.5 069716 100 AKZ 2.5 069718 100 Direct mounting with BB 1, please order separately 300 V/6,3 A/26...12 AWG Type Cat. No. Qty. ASK 1 PA 037696 100 Insulation stripping length/clamping screw/screwdriver blade VDE rated data, VDE 0611 Part 1/8.92/IEC 947-7-1 Rated voltage / current / cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988 Size Continuous current rating of cross-connection 2-pole Continuous current rating of cross-connection multipole UL / CSA rated data Voltage / current / conductor size Voltage / current / conductor size Ordering data A A UL CSA PA Blue PA ASK 1 (for G fuse inserts 5x 20 without indicator) End plate/attachment bracket (thickness mm) AP PA Blue PA BB 1 (7) BS M 3 x 15 032056 035900 50 100 BB 4 (7,5) 069756 50 AP (2,5) AP (2,5) 069736 069738 50 50 AP (1,5) 038036 20 Q Q Q Q 036820 036830 036840 036850 50 50 50 20 QB 21) QB 31) QB 41) 046110 046120 046130 50 50 50 Partition (Thickness mm) TW PA (0,5) 034826 50 TSch 4 036336 100 Q Q Q Q 033640 033650 033660 036860 50 50 50 20 VL 2 044670 VH 10 044660 BS M 2,5 x 14 026680 50 50 100 Small partition Cross-connection Q3 2 3 4 10 2 3 4 10 Switchable cross-connection link VL BS VH Zur Befestigung der ASK 1 Schrauben M 3 x ... DIN EN. ISO 1207 oder M 3 x ... DIN EN, ISO 1580 verwenden Test plug/Socket PS StB StB 8.5 PS 2.3 021570 018040 50 20 AD 4 030340 BSK M 2,5x18 030330 50 100 FW 6 FS 6 500 500 StB 8.5 PS 2.3 021570 018040 50 20 Cover/Diode plug contact sleeve contact sleeve 055330 100 FW 6.5 FS 6.5 500 500 Marking strips Consecutive horizontal Consecutive vertical 046866 046876 FW 5 FS 5 047346 047356 500 500 046816 046826 For further accessories see section 3, further marking material see section 8 1) The conductor cross-section is reduced to max. 2.5 mm2 when QB is used * With contact sleeve 19 A 2/119 Feed-through terminals Screw connection AKA 2.5 ADK 1 ADK 1 F ADK 3 F ADK 1 S 6/20/31 7,8 9 mm/M 2,5/3,5 x 0,6 6/22/36,5 8,4 9 mm/M 3,5/3,5 x 0,6 6/22/36,5 8,5/7,5 11 mm/M 2,5/3,5 x 0,6 6/22/36,5 8,4 - 400 V/20 A/2,5/1,5 mm2 6 kV/3 400 V/16 A/4/1,5 mm2 6 kV/3 400 V/20 A/2,5/1,5 mm2 6 kV/3 400 V/16 A/2,5/1,5/1 mm2 6 kV/3 0,4...0,6 1 0,5...1,0 2 0,4...0,7 1 - - 0,5...2,5 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0.13...2.5 / A2 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0.13...2.5 / A3 0,5...2,5 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0.13...2.5 / A2 - 10 10 - - 300 V/20 A/26...12 AWG 300 V/10 A/24...12 AWG 1,5 Qty. 300 V/10 A/26...12 AWG 300 V/15 A/26...12 AWG 1,5 Qty. 2,5 Qty. 030386 100 030106 100 300 V/20 A/26...14 AWG 300 V/15 A/22...14 AWG 1,5 Qty. 2,5 Qty. 047606 100 047866 100 300 V/18 A/12 AWG max. 300 V/3 A/- 1,5 Qty. 2,5 Qty. 047616 100 Solder connection Tab connection Spring clip connection iaw. DIN 41 611 Part 4 Wrap connection iaw. DIN/IEC 352 Part 1 Dimensions Width / length / height incl. pins (mm) Length solder tag/pin (mm) Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Max. Clamping Range in mm2 / Gauge pin to IEC 947-1/1988Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering information Version for sheet metal mm: PA KrG EP Pin 0,6x0,6 Pin 1,0x1,0 Pin 0,8x1,6 FS 1x6,3 slotted/0,8x2,8 030072 - 0.5...2.5 / - 100 035990 100 100 047856 12-pole PA End plate (thickness mm) KrG PA EP Type AP (3) Cat. No. Qty. 016252 100 Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. AP (3) 047626 50 AP (3) AP (3) 047626 036000 50 20 AP (3) 047626 50 TW (0,5) 044230 50 TW (0,5) 044230 50 TW (0,5) 044230 50 PS 2.3 018040 20 SST 1.2 IH 2.8 030660 038606 - 100 SST 1.2 IH 2.8 030660 038606 - 100 SST 1.2 IH 2.8 IH 6.3 030660 038606 038626 - 100 100 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 FW 6 FS 6 046866 046876 500 500 Spacer (thickness mm) KrG KrG ZP (1,5) ZP (2,5) 024072 028852 50 20 Partition (thickness mm) TW Test plug/Socket PS StB Fuse pin/insulation sleeve/expansion rivet SST 1.2 030660 - FW 6 FS 6 046866 046876 500 500 IH Marking tags Print Consecutive horizontal Consecutive vertical For further accessories see section 3, further marking material see section 8 * Insulation sleeves are to be used for tab connections to maintain the rated voltage. 2/120 ADK 3 W ADK 1 T AKZ 2.5 K ADK 1 FT MK 2/12 010916 Solder tag 6/22/57,5 8,4/21 - 6/22/50,5 19,5...21,9 9 mm/M 3/3,5 x 0,6 5/26/45,5 22,4...23,6 7 mm/M 2,5/3,0 x 0,5 6/22/52 24 11 mm/M 2,5/3,5 x 0,6 86/15/23 8 5 250 V/8 A/1,5 mm2 4 kV/3 400 V/8 A/4 mm2 6 kV/3 250 V/8 A/2,5 mm2 4 kV/3 250 V/10 A/2,5 mm2 4 kV/3 63 V/20 A/2,5/1,5 mm2 1,5 kV/3 - - 0,5...1,0 2 0,4...0,7 1 0,4...0,7 1 0,4...0,6 1 - 0,5...4 1,5...4 0,5...4 0,5...2,5 0,5...2,5 0.13...4.0 / A3 0,5...2,5 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.13...2.5 / A2 0,5...2,5 1,5...2,5 0,5...2,5 0,5...1,5 0,5...1,5 0.33...2.5 / A2 0,5...2,5 1,5...2,5 0,5...2,5 0,5...2,5 0,5...2,5 0.2...2.5 / A2 - 10 10 - - 300 V/15 A/- 1,5 Qty. 300/250 V/10 A/26...12 AWG 300 V/15 A/26...12 AWG 1,5 Qty. 2,5 Qty. 300/250 V/10 A/22...12 AWG 300 V/10 A/26...10 AWG 1,5 Qty. 010916 Solder tag 100 - 300 V/3 A/22...14 AWG 1,5 Qty. 2,5 Qty. 035980 100 010896 010906 017696 100 - - 052146 037236 036636 100 051766 100 037226 100 036626 100 100 100 100 100 100 017706 300 V/10 A/24...12 AWG 300 V/10 A/24...12 AWG Cat. No. Qty. 024146 Type Cat. No. Qty. AP (3) 036000 20 TW (0,5) 044230 50 SST 1.2 IH 2.8 FW 6 FS 6 030660 038606 046866 046876 - 100 500 500 Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. AP (3) 047626 50 AP (3) 069726 50 AP (3) 047626 50 TW (0,5) 044230 50 TW (1,5) 031856 20 TW (0,5) 044230 50 PS 2.3 018040 20 PS 2.3 StB 8.5 018040 021570 20 50 SST 1.2 030660 - SST 1.2 030660 - IH 2.8 038606 100 FW 6 FS 6 046866 046876 500 500 FW 5 FS 5 047346 047356 500 500 FW 6 FS 6 50 046866 046876 500 500 SN 020010 500 BSTb 28/12 BSTo 28/12 024570 024560 50 50 2/121 Rack mounted interface system Dimensions Width / length / height (mm) Hole spacing/attachment dimensions mm Insulation stripping length/clamping screw/screwdriver blade Rated data Rated voltage/rated current/rated cross-section Rated impulse voltage VDE 0110/1.89/Pollution severity Further technical data Tightening torque range Nm Torque setting with DMS 2 electric screwdriver Clampable conductor solid H07V-U mm2 stranded H07V-R mm2 flexible H07V-K mm2 flexible H07V-K and AEH DIN 46 228/1 mm2 flexible H07V-K and AEH with plastic collar mm2 Plug gauge according to 947-1 Size Continuous current rating of cross-connection 2-pole A Continuous current rating of cross-connection multipole A UL / CSA rated data Voltage / current / conductor size UL Voltage / current / conductor size CSA Ordering data Version Pin 1.0 x 1.0 PA Pin 0.8 x 2.8 (push-on), unprinted PA Pin 0.8 x 2.8 (push-on), printed, 1...32 PA Pin 0.8 x 2.8 (push-on), printed, 1...32, blue PA 6 x plug (6.3 x 0.8) KrG 6 x plug (6.3 x 0.8), blue KrG 6 x plug (6.3 x 0.8), or 12 x 2.8 x 0.8 slotted KrG 6 x plug (6.3 x 0.8), or 12 x 2.8 x 0.8 slotted, blue KrG 3 x plug (6.3 x 0.8) /1 x solder per pole KrG 3 x plug (6.3 x 0.8) /1 x solder per pole, blue KrG 3 x plug (6.3 x 0.8 or 6 x 2.8 x 0.8)/1 x solder KrG 3 x plug (6.3 x 0.8 or. 6 x 2.8 x 0.8)/1 x solder, blue KrG 2 x direct connection, 1 x pin 0.8 x 1.6 PA DSG 1.5 T/32 TOP 1.5 F/32 SP 10 FF2) SP 10 LF3) SP 60 FF2) SP 60 LF3) 40,5/128,4/43 122,4 12 mm 40,2/110,6/29,5 101,6/20,3 10 mm/M 2,5/3,5 x 0,6 42/46,5/170/28 147 40/45,5/162,5/110 151/90 250 V/10 A/1,5 mm2 4 kV/3 250* V/6 A/1,5/1 mm2 4 kV/3 1000* V/16 A/2,5/1,5 mm2 6 kV/3 400* V/16 A/2,5/1,5 mm2 6 kV/3 300/250 V/10 A/- - Type Cat. No. Qty. 300/250 V/10 A/- - Type Cat. No. Qty. SP 10 FF 045622 10 SP 60 FF 4) SP 60 FF 4) SP 60 FF 4) 034032 034037 060902 1 1 1 SP 10 LF 048052 10 SP SP SP SP LF 4) LF 4) LF 5) LF 5) 034372 034377 012452 012457 1 1 1 1 0,4...0,7 1 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 A1 0,5...2,5 1,5 0,5...1,5 0,5...1,5 0,5...1,5 A1 - - Type - - Type TOP 1.5 TOP 1.5 TOP 1.5 TOP 1.5 DSG 1.5 T/32 Cat. No. Qty. 063086 F/32 F/32 F/32 F/32 Cat. No. Qty. 0443161) 5 026536 10 030156 10 030158 10 60 60 60 60 5 printed: 4) A...F / 1...10 5) 00...50 / 1...10 Insulation sleeve Marking tags dekafix Type Print For group markers FW 5 Best-Nr. Qty. 047346 500 Type IH 2.8 Best-Nr. Qty. 038606 100 Type IH 2.8 IH 6.3 Best-Nr. Qty. 038606 100 038626 100 FW 5 047346 Type IH 2.8 IH 6.3 Best-Nr. Qty. 038606 100 038626 100 500 For further accessories see section 3, further marking material see section 8 * Insulation sleeves are to be used for tab connections to maintain the rated voltage. 1) Rated voltage 125 V 2/122 2) 3) FF=Tab - Tab LF=Solder - Tab SP 90 FF 2) SP 90 LF 3) 40/45,5/228,5/110 217/90 400* V/16 A/2,5/1,5 mm2 6 kV/3 300/250 V/10 A/- - Type Cat. No. Qty. SP SP SP SP SP SP 90 90 90 90 90 90 FF** FF** FF** FF** LF** LF** 024812 024817 060892 060897 024822 024827 1 1 1 1 1 1 Print: ** A ...F / 1...15 Type IH 2.8 IH 6.3 2) 3) Cat. No. Qty. 038606 100 038626 100 FF = Tab -Tab LF= Solder - Tab 2/123 Rack mounted interface system RV 8/8 long RV 8/8 short RV 8/9 long RV 8/9 short 125 V/-/- 125 V/-/- 105 V/-/- 125 V/-/- Technical data according to VDE Pin versions (internal) 0,8 x 2,4/1 x 1 0,8 x 2,4/0,8 x 2,4 Cat. No. Qty. 046886 1 046896 1 Plug adapter 1-pole Type DSA 1 Cat. No. Qty. 057606 50 Type DSA 1 Cat. No. Qty. 046716 1 046726 1 Cat. No. Qty. 049896 1 049906 1 Cat. No. Qty. 044406 1 054596 1 Cat. No. Qty. 057606 50 With shield pins Type Cat. No. Qty. DSA 1 057606 50 With shield pins Type Cat. No. Qty. DSA 1 057606 50 for connection of solid and flexible solid conductors from 0.75 to 1.5 mm2 directly on to the pins of the interface system. RV 4/9 short RV 8/20 short RV 8/56 short 125 V~/-/- 125 V~/-/- 125 V~/-/- Technical data according to VDE Pin versions (internal) 0.8 x 2.4/1 x 1 0.8 x 2.4/0.8 x 2.4 Plug adapter 1-pole 8-pole Cat. No. Qty. 137896 1 138296 1 With potential compensation Type Cat. No. Qty. DSA 1 057606 50 DSA 1/8 014076 40 Cat. No. Qty. 011936 1 054446 1 Type Cat. No. Qty. for connection of solid and flexible solid conductors from 0.75 to 1.5 mm2 directly on to the pins of the interface system. Additional versions available on request Size A Type in mm RV 8/8 K 81 RV 8/9 K 89 RV 8/8 L 93 RV 8/9 L 100 RV 8/20 K 187,62/31,5 RV 8/56 K 460/31,5 (K = short/L = long) Bestell.-Nr. 046886 046896 049896 049906 046716 046726 044406 054596 011936 054446 046226 053306 137896 138296 RV 8/8 L 8/8 L 8/9 L 8/9 L 8/8 K 8/8 K 8/9 K 8/9 K 8/20 K 8/20 K 8/56 K 8/56 K 4/9 K 4/9 K For further accessories see section 3, further marking material see section 8 2/124 Size B in mm 40,64 40,64 40,64 40,64 63 63 a 26 26 26 26 26 26 26 26 26 26 26 26 26 26 b 20 26 20 26 20 26 20 26 20 26 20 26 20 26 c 200 206 200 206 84 89 84 89 84 89 84 89 84 89 Cat. No. Qty. 046226 1 053306 1 Type Cat. No. Qty.