VS-SD803C..C Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 2Document Number: 93180
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at heatsink temperature IF(AV) 180° conduction, half sine wave
Double side (single side) cooled
845 (420) A
55 (75) °C
Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled 1326
A
Maximum peak, one-cycle forward,
non-repetitive current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
11 295
t = 8.3 ms 11 830
t = 10 ms 100 % VRRM
reapplied
9500
t = 8.3 ms 9945
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
640
kA2s
t = 8.3 ms 583
t = 10 ms 100 % VRRM
reapplied
451
t = 8.3 ms 412
Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 6400 kA2s
Low level of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 1.02 V
High level of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 1.32
Low level of forward slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.38 mW
High level of forward slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 0.28
Maximum forward voltage drop VFM Ipk = 2655 A, TJ = TJ maximum tp = 10 ms sinusoidal wave 1.89 V
RECOVERY CHARACTERISTICS
CODE
MAXIMUM VALUE
AT TJ = 25 °C TEST CONDITIONS TYPICAL VALUES
AT TJ = 125 °C
trr AT 25 % IRRM
(μs)
Ipk
SQUARE
PULSE
(A)
dI/dt
(A/μs)
Vr
(V)
trr AT 25 % IRRM
(μs)
Qrr
(μC)
Irr
(A)
S10 1.0
1000 50 -30
2.0 45 34
S15 1.5 3.2 87 51
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating temperature range TJ-40 to 125 °C
Maximum storage temperature range TStg -40 to 125
Maximum thermal resistance,
case junction to heatsink RthJ-hs
DC operation single side cooled 0.076 K/W
DC operation double side cooled 0.038
Mounting force, ± 10 % 9800 (1000) N (kg)
Approximate weight 83 g
Case style See dimensions - link at the end of datasheet B-43
RthJ-hs CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.006 0.007 0.005 0.005
TJ = TJ maximum K/W
120° 0.008 0.008 0.008 0.008
90° 0.010 0.010 0.011 0.011
60° 0.015 0.015 0.016 0.016
30° 0.026 0.026 0.026 0.026
IFM trr
dir
dt
IRM(REC)
Qrr
t