Only One Name Means ProTek’Tion™

 




The PSRDAxx-6 Series are low capacitance mul-line steering diode/transient voltage suppressor arrays that provides
board level protecon for standard TTL and CMOS bus line applicaons against the damaging eects of ESD, terary
lightning and switching transients.
The PSRDAxx-6 Series has a peak pulse power rang of 500 Was for an 8/20µs waveshape. This device series meets
the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
Compable with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
Compable with IEC 61000-4-4 (EFT): 40A - 5/50ns
Compable with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-
Gnd) & Level 3(Line-Line)
500 Was Peak Pulse Power per Line (tp = 8/20µs)
Bidireconal Conguraon
Available in 3.3V and 5V
Protects Up to Six Lines
Ultra Low Capacitance: 5pF
RoHS Compliant
REACH Compliant

Molded JEDEC SO-8 Package
Approximate Weight: 70 milligrams
Lead-Free Pure-Tin Plang (Annealed)
Solder Reow Temperature:
Pure-Tin - Sn, 100: 260-270°C
12mm Tape and Reel Per EIA Standard 481
Flammability Rang UL 94V-0

Computer Interface Protecon
Ethernet - 10/100/1000 Base T
Set-Top Box Protecon
Industrial Controls


1 2 4
8
3
567
GND I/O 6 I/O 5 I/O 4
I/O 3+VREF
I/O 2I/O 1
Only One Name Means ProTek’Tion™

 




   
Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Was
Operang Temperature TL-55 to 150 °C
Storage Temperature TSTG -55 to 150 °C
Connuous Power Dissipaon PPC 1000 mW
Maximum Forward Voltage @ 10mA (Note 1) VF1.1 Volts

1. Measured between pins 8 to 1, 2, 3, 4, 5, 6 or 7.

































PSRDA3.3-6 SGG 3.3 4.0 6.5 125 5
PSRDA05-6 SGH 5.0 6.0 9.8 20 5

1. Capacitance measured at VWM = VCC connected between I/O pins to pin 8 (Gnd). VR = VWM @ 1MHz. As shown in Figure 6, REF1 is connected to ground, REF2 is connected to +VCC, and
input applies to VCC = 5V, VSIGN = 30mV, F = 1MHz



500W, 8/20µs Waveform






Only One Name Means ProTek’Tion™

 



Peak Pulse Power
8/20µs
Average Power










TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
tf
e-t
Peak Value IPP
td = t/(IPP/2)



















Only One Name Means ProTek’Tion™

 









G
REF1
+VCC
VSIGN
REF2
I/O







Only One Name Means ProTek’Tion™

 






   
BV V See Table 2 200
IBV µA 1 0.01
Cjo pF See Table 2 5
ISA See Table 2 1E-13
Vj V 0.6 0.6
M - 0.33 0.33
N - 1 1
RSOhms See Table 2 0.31
TT s 1E-8 1E-9
EG eV 1.11 1.11

    
PSRDA3.3-6 4.0 438 1E-11 0.21
PSRDA05-6 6.0 284 1E-11 0.14
ABD - Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Recer Diode
Lg - Lead Inductance
Lg
0.7nH
LCRD
I/O ABD
LCRD
VCC
Only One Name Means ProTek’Tion™

 




Circuit connecvity is as follows:
Pins 1, 2, 4, 5, 6 and 7 connected to the datalines.
Pin 8 connected to ground.
Pin 3 connected to the databus.

Circuit board layout is crical for electromagnec compability protecon. The following guidelines are recommended:
The protecon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
The path length between the TVS device and the protected line should be minimized.
All conducve loops including power and ground loops should be minimized.
The transient current return path to ground should be kept as short as possible to reduce parasic inductance.
Ground planes should be used whenever possible. For mullayer PCBs, use ground vias.
1 2 4
8
3
567
VBUS
VBUS
D+
D+
D-
D-
GND
GND
USB Port
USB Port
VBUS
D+
D-
GND
USB Port
USB Controller
Only One Name Means ProTek’Tion™

 




  
   
A 4.80 5.00 0.189 0.196
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
D 0.35 0.49 0.014 0.019
F 0.40 1.25 0.016 0.049
G 1.27 BSC 0.05 BSC
J 0.18 0.25 0.007 0.009
K 0.10 0.25 0.004 0.008
P 5.80 6.20 0.229 0.244
R 0.25 0.50 0.010 0.019

1. -T- = Seang plane and datum surface.
2. Dimensions “A” and “B” are datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold ash and metal burrs.

  
   
A 1.14 1.40 0.045 0.055
B 0.64 0.89 0.025 0.035
C 6.22 - 0.245 -
D 3.94 4.17 0.155 0.165
E 1.02 1.27 0.040 0.050

1. Controlling dimension: inches.
-A-
8 5
14
-B- P
GD
-T-
C
K J
R x 45°
0° - 10°
F
4 PL
0.010” (0.25mm) MB
+
8 PL
0.010” (0.25mm) B
+AT
A
B
CD
E
M
MSS
Only One Name Means ProTek’Tion™

 



User Direcon of Feed
t
K0
A0 P
D
P0
P2 E
B0
F
W
10 Pitches Cumulave
Tolerance on tape ± 0.2


     
178mm (7”) 12mm 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25

1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Sux - T7 = 7” Reel - 1,000 pieces per 12mm tape.
4. Sux - T13 = 13” Reel - 2,500 pieces per 12mm tape.
5. Bulk product shipped in tubes of 98 pieces per tube.
6. Marking on Part - marking code (see page 2), date code, logo and pin one dened by dot on top of package.
Package outline, pad layout and tape specicaons per document number 06009.R3 9/10.


     
PSRDAxx-6 -LF -T7 1,000 7” 98
PSRDAxx-6 -LF -T13 2,500 13” 98
This device is only available in a Lead-Free conguraon.
Only One Name Means ProTek’Tion™

 



COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.

In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that oers a product line of tran-
sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the eects of lightning, electrostac discharge (ESD), nuclear electromagnec pulses
(NEMP), inducve switching and EMI / RFI. ProTek Devices also oers high performance interface and linear products that include analog
switches; mulplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con-
sumer; industrial; automove and other applicaons.


2929 South Fair Lane
Tempe, Arizona 85282
USA

General: 602-431-8101
Sales: & Markeng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107

General: 602-431-2288

Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com

8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313

www.protekdevices.com