DO NOT
SCALE FROM
THIS PRINT
(No OF POS x 0.800[.0315]) + 1.40[.055] REF
"A" REF
0.90
REF
.04 1.40
REF
.06
"A"
"A"
C
L
6.25
REF
.246
0.85
±0.08
(TYP)
.033
±.003
"B"
0.15[.006]
0.95 .04
REF (TYP)
9.10
REF
.36
"D" (TYP)
2.65 .10
REF
0.95
REF (TYP)
.037
1.05
REF (TYP)
.04
0.85
±0.08
.03
±.003
"C" REF
SECTION "A"-"A"
ROW 1
(SEE TABLE 2)
C
C
C
L
C
C
ROW 2
(SEE TABLE 2)
SEE TABLE 1
(No OF POS x 0.800[.0315]) + 3.00[.118] REF
7.40 .29
REF
1.90 .07
REF
(No OF POS -1) x 0.800[.0315]
0.80
±0.05
.031
±.002
(TOL NON-ACCUM)
0.80
±0.05
.031
±.002
(TOL NON-ACCUM)
FOR POSITIONS -10, -20, -30 & -35
(SHOWN: MEC8-135-01-XX-D-RA1)
FIG 1
C
C
C
L
01
02
POSITION #1
INDICATOR
70
69
1.40 .06
REF
(No OF POS + 2) x 0.80[.031] REF
0.20
REF (TYP)
.01
MEC8-XX-XX-D-RA1
C
L
C
L
MEC8-1XX-XX-XX-D-RXX-XX
No OF POSITIONS (PER ROW)
ROW SPECIFICATION
TAIL OPTION
-RA1: STANDARD (SEE FIG. 1)
(USE MEC8-XX-XX-D-RA1,
C-173-01-X & C-174-XX-X)
-RA2: ELEVATED (SEE FIG. 3)
(USE MEC8-XX-XX-D-RA2,
C-173-02-X & C-174-02-X)
-RL1: LATCHING (SEE FIG.4)
(USE MEC8-XX-XX-D-RL1,
C-173-01-X, C-174-03-X &
WT-25-03-T, AVAILABLE IN
POS -13, -25, -37 & -49)
OPTION
-TR: TAPE & REEL
-01: 1mm [.039] THICK CARD
(USE MEC8-XX-01-D-RAX)
-02: 1.57mm [.062] THICK CARD
(USE MEC8-XX-02-D-RAX)
CARD THICKNESS
-10, -20, -30, -35 (SEE FIG. 1)
-40 & -50 (SEE FIG. 2, SHEET 2)
-13, -25, -37, -49 (-02 CARD
THICKNESS ONLY, SEE FIG. 2)
-D: DOUBLE
(USE MEC8-XX-XX-D-RXX)
PLATING
= NOT TOOLED
*
*
**
C
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
= SEE NOTE 4
**
S
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.3 [.01] 2
.XX:
.13 [.005]
.XXX:
.051 [.0020]
MATERIAL:
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-D-RXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
10/18/01
4
1
SHEET SCALE: 2.25:1
INSULATOR: LCP
-01: COLOR: NATURAL
-02: COLOR: BLACK
CONTACT: PHOS BRONZE
WELB TABS: PHOS BRONZE
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. -02 CARD THICKNESS ONLY AVAILABLE ON -RA1 & -RL1
TAIL OPTION.
5. PARTS TO BE PACKAGED IN TRAYS UNLESS OTHERWISE SPECIFIED.
FLAMMABILITY RATING: UL 94V-O
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION S
"F" REF
"H" REF
"G" REF
(No OF POS x 0.80[.031]) + 6.20[.244] REF
FIG 2
1.90 .07
REF
0.80
±0.05
.031
±.002
(TOL NON-ACCUM)
0.80
±0.05
.031
±.002
(TOL NON-ACCUM)
"E"
0.13[.005]
4.00 .16
((No OF POS + 3) x 0.800[.0315])
0.13[.005]
"E"
0.13[.005]
4.00 .16
(No OF POS + 3) x 0.800[.0315]
C
C
C
80
79
02
01
C
C
FOR POSITIONS -13, -25, -37, -40, -49 & -50
(FOR -13, -25, -37 & -49: -02 CARD THICKNESS ONLY)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-140-01-XX-D-RA1)
C
(No OF POS + 6) x 0.80[.031] REF
C
L
C
L
S
SHEET OF
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-D-RXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
10/18/01
4
2
SHEET SCALE: 2.5:1
REVISION S
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"A" REF
(SEE TABLE 2)
"C"
"C"
FIG 3
-RA2: ELEVATED OPTION
(SAME AS FIG 2, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-150-01-XX-D-RA2)
* = NOT TOOLED
MEC8-XX-01-D-RA2
4.65
.18
REF
"D" TYP
(SEE TABLE 2)
"C" REF
(SEE TABLE 2)
"B"
.15[.006]
(SEE TABLE 2)
SECTION "C"-"C"
ROW 2
(SEE TABLE 2)
ROW 1
(SEE TABLE 2)
C
SHEET OF
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-D-RXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
10/18/01
4
3
SHEET SCALE: 2.5:1
REVISION S
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
3.00
REF
.12
2.00
REF
.08
1.25
REF
.05
(No OF POS x 0.800[.031]) + 14.95[.589]
2.12 .08
WT-25-03-T
MEC8-XX-XX-D-RL1
0.30
REF
.01
4.50 .18
REF
(No OF POS x 0.80[.03]) + 17.20[.68] REF
1.00
REF
.04
0.60
REF
.02
3.30
REF
.13
"F"
"F"
7.74 .30
REF
0.56
REF
.02
1.45 .06
REF
SECTION "F"-"F"
-RL1: LATCHING OPTION
(SAME AS FIG 2, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-125-01-XX-D-RL1
(AVAILIBLE ONLY IN POS
-13, -25, -37 & -49)
FIG 4
C
SHEET OF
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-D-RXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
10/18/01
4
4
SHEET SCALE: 2.5:1
REVISION S
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
