SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 D Inputs Are TTL-Voltage Compatible D Designed Specifically for High-Speed D Memory Decoders and Data-Transmission Systems Incorporate Three Enable Inputs to Simplify Cascading and/or Data Reception 15 3 14 4 13 5 6 12 11 7 10 8 9 B C G2A G2B G1 Y7 1 16 B A NC VCC Y0 VCC VCC Y0 Y1 Y2 Y3 Y4 Y5 Y6 SN54AHCT138 . . . FK PACKAGE (TOP VIEW) C G2A NC G2B G1 15 Y0 14 Y1 2 3 13 Y2 12 Y3 4 5 11 Y4 10 Y5 6 7 8 9 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 Y1 Y2 NC Y3 Y4 Y7 GND NC Y6 Y5 2 16 Y6 1 A SN74AHCT138 . . . RGY PACKAGE (TOP VIEW) SN54AHCT138 . . . J OR W PACKAGE SN74AHCT138 . . . D, DB, DGV, N, NS, OR PW PACKAGE (TOP VIEW) A B C G2A G2B G1 Y7 GND JESD 17 ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) GND D D Latch-Up Performance Exceeds 250 mA Per NC - No internal connection description/ordering information The 'AHCT138 3-line to 8-line decoders/demultiplexers are designed to be used in high-performance memory-decoding and data-routing applications that require very short propagation-delay times. In high-performance memory systems, this decoder can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of this decoder and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. ORDERING INFORMATION Tape and reel SN74AHCT138RGYR HB138 PDIP - N Tube SN74AHCT138N SN74AHCT138N Tube SN74AHCT138D Tape and reel SN74AHCT138DR SOP - NS Tape and reel SN74AHCT138NSR AHCT138 SSOP - DB Tape and reel SN74AHCT138DBR HB138 Tube SN74AHCT138PW Tape and reel SN74AHCT138PWR TVSOP - DGV Tape and reel SN74AHCT138DGVR HB138 CDIP - J Tube SNJ54AHCT138J SNJ54AHCT138J CFP - W Tube SNJ54AHCT138W SNJ54AHCT138W LCCC - FK Tube SNJ54AHCT138FK SNJ54AHCT138FK TSSOP - PW -55C 55 C to 125 125C C TOP-SIDE MARKING QFN - RGY SOIC - D -40C to 85C ORDERABLE PART NUMBER PACKAGE TA AHCT138 HB138 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright (c) 2003, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 description/ordering information (continued) The conditions at the binary-select inputs and the three enable inputs select one of eight output lines. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters, and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. FUNCTION TABLE SELECT INPUTS ENABLE INPUTS OUTPUTS G1 G2A G2B C B A Y0 Y1 Y2 Y3 Y4 Y5 Y6 X H X X X X H H H H H H H Y7 H X X H X X X H H H H H H H H L X X X X X H H H H H H H H H L L L L L L H H H H H H H H L L L L H H L H H H H H H H L L L H L H H L H H H H H H L L L H H H H H L H H H H H L L H L L H H H H L H H H H L L H L H H H H H H L H H H L L H H L H H H H H H L H H L L H H H H H H H H H H L logic diagram (positive logic) 15 Y0 A 1 14 Y1 13 Select Inputs B Y2 2 12 Y3 11 3 Data Outputs Y4 C 10 Y5 9 Y6 4 G2A Enable Inputs G2B 7 5 6 G1 Pin numbers shown are for the D, DB, DGV, J, N, NS, PW, RGY, and W packages. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Y7 SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 mA Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73C/W (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82C/W (see Note 2): DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120C/W (see Note 2): N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67C/W (see Note 2): NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64C/W (see Note 2): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C/W (see Note 3): RGY package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. 3. The package thermal impedance is calculated in accordance with JESD 51-5. recommended operating conditions (see Note 4) SN54AHCT138 SN74AHCT138 MIN MAX MIN MAX 4.5 5.5 4.5 5.5 VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage VI Input voltage 0 5.5 VO Output voltage 0 VCC IOH High-level output current IOL Low-level output current t/v Input transition rise or fall rate TA Operating free-air temperature 2 2 0.8 V V 0.8 V 0 5.5 V 0 VCC -8 -55 UNIT -8 V mA 8 8 mA 20 20 ns/V 85 C 125 -40 NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH VOL TEST CONDITIONS VCC IOH = -50 mA 45V 4.5 IOH = -8 mA IOL = 50 mA TA = 25C MIN TYP 4.4 4.5 3.94 45V 4.5 IOL = 8 mA SN54AHCT138 MAX MIN MAX SN74AHCT138 MIN 4.4 4.4 3.8 3.8 MAX UNIT V 0.1 0.1 0.1 0.36 0.5 0.44 V II VI = 5.5 V or GND 0.1 1* 1 mA ICC VI = VCC or GND, IO = 0 5.5 V 4 40 40 mA ICC One input at 3.4 V, Other inputs at VCC or GND 5.5 V 1.35 1.5 1.5 mA Ci VI = VCC or GND 10 pF 0 V to 5.5 V 5V 2 10 * On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V. This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or V . CC switching characteristics over recommended operating free-air temperature range, VCC = 5 V 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL * FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A B, A, B C Any Y CL = 15 pF G1 Any Y CL = 15 pF G2A G2B G2A, Any Y CL = 15 pF A B, B C A, Any Y CL = 50 pF G1 Any Y CL = 50 pF G2A G2B G2A, Any Y CL = 50 pF TA = 25C MIN SN54AHCT138 SN74AHCT138 TYP MAX MIN MAX MIN MAX 7.6* 10.4* 1* 12* 1 12 7.6* 10.4* 1* 12* 1 12 6.6* 9.1* 1* 10.5* 1 10.5 6.6* 9.1* 1* 10.5* 1 10.5 7* 9.6* 1* 11* 1 11 7* 9.6* 1* 11* 1 11 8.1 11.4 1 13 1 13 8.1 11.4 1 13 1 13 7.1 10.1 1 11.5 1 11.5 7.1 10.1 1 11.5 1 11.5 7.5 10.6 1 12 1 12 7.5 10.6 1 12 1 12 TEST CONDITIONS TYP UNIT ns ns ns ns ns ns On products compliant to MIL-PRF-38535, this parameter is not production tested. operating characteristics, VCC = 5 V, TA = 25C PARAMETER Cpd 4 Power dissipation capacitance No load, POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 f = 1 MHz 14 UNIT pF SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 PARAMETER MEASUREMENT INFORMATION VCC From Output Under Test Test Point RL = 1 k From Output Under Test S1 Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS 3V 1.5 V Timing Input 0V tw 3V 1.5 V Input 1.5 V th tsu 3V 1.5 V Data Input 1.5 V 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V 1.5 V Input 1.5 V 0V tPLH tPHL VOH In-Phase Output 50% VCC tPHL Out-of-Phase Output 50% VCC VOL 3V Output Control Output Waveform 1 S1 at VCC (see Note B) 1.5 V 0V tPZL 50% VCC tPLZ VCC 50% VCC tPZH tPLH VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 1.5 V Output Waveform 2 S1 at GND (see Note B) VOL + 0.3 V VOL tPHZ 50% VCC VOH - 0.3 V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr 3 ns, tf 3 ns. D. The outputs are measured one at a time with one input transition per measurement. E. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 APPLICATION INFORMATION SN74AHCT138 BIN/OCT 1 2 3 VCC 0 1 1 2 2 4 6 3 & 4 4 EN 5 5 6 7 15 14 13 12 11 10 9 7 0 1 2 3 4 5 6 7 SN74AHCT138 BIN/OCT 1 A0 2 A1 3 A2 1 2 2 4 6 A3 0 1 3 & 4 4 A4 EN 5 5 6 7 15 14 13 12 11 10 9 7 8 9 10 11 12 13 14 15 SN74AHCT138 BIN/OCT 1 2 3 6 0 1 1 2 2 4 3 & 4 4 5 EN 5 6 7 Figure 2. 24-Bit Decoding Scheme 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 14 13 12 11 10 9 7 16 17 18 19 20 21 22 23 SN54AHCT138, SN74AHCT138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS SCLS266M - DECEMBER 1995 - REVISED JULY 2003 APPLICATION INFORMATION SN74AHCT138 BIN/OCT 1 A0 2 A1 3 A2 1 1 2 2 4 6 VCC 0 3 & 4 4 A3 EN 5 A4 5 6 7 15 14 13 12 11 10 9 7 0 1 2 3 4 5 6 7 SN74AHCT138 BIN/OCT 1 2 3 0 1 1 2 2 4 6 3 & 4 4 EN 5 5 6 7 15 14 13 12 11 10 9 7 8 9 10 11 12 13 14 15 SN74AHCT138 BIN/OCT 1 2 3 0 1 1 2 2 4 6 3 & 4 4 EN 5 5 6 7 15 14 13 12 11 10 9 7 16 17 18 19 20 21 22 23 SN74AHCT138 BIN/OCT 1 2 3 6 0 1 1 2 2 4 3 & 4 4 5 EN 5 6 7 15 14 13 12 11 10 9 7 24 25 26 27 28 29 30 31 Figure 3. 32-Bit Decoding Scheme POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) 5962-9851701Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629851701Q2A SNJ54AHCT 138FK 5962-9851701QEA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9851701QE A SNJ54AHCT138J 5962-9851701QFA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9851701QF A SNJ54AHCT138W SN74AHCT138D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138DBLE OBSOLETE SSOP DB 16 TBD Call TI Call TI -40 to 85 SN74AHCT138DBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138DGVR ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DGVRE4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DGVRG4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Sep-2013 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) SN74AHCT138N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 85 SN74AHCT138N SN74AHCT138NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 85 SN74AHCT138N SN74AHCT138NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT138 SN74AHCT138PW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138PWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138PWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138PWLE OBSOLETE TSSOP PW 16 TBD Call TI Call TI -40 to 85 SN74AHCT138PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138PWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138PWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB138 SN74AHCT138RGYR ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 HB138 SN74AHCT138RGYRG4 ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 HB138 SNJ54AHCT138FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629851701Q2A SNJ54AHCT 138FK SNJ54AHCT138J ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9851701QE A SNJ54AHCT138J SNJ54AHCT138W ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9851701QF A SNJ54AHCT138W Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54AHCT138, SN74AHCT138 : * Catalog: SN74AHCT138 * Enhanced Product: SN74AHCT138-EP, SN74AHCT138-EP * Military: SN54AHCT138 Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Enhanced Product - Supports Defense, Aerospace and Medical Applications * Military - QML certified for Military and Defense Applications Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74AHCT138DBR SSOP DB 16 2000 330.0 16.4 8.2 SN74AHCT138DGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHCT138DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74AHCT138NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN74AHCT138PWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74AHCT138RGYR VQFN RGY 16 3000 330.0 12.4 3.8 4.3 1.5 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHCT138DBR SSOP DB 16 2000 367.0 367.0 38.0 SN74AHCT138DGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74AHCT138DR SOIC D 16 2500 333.2 345.9 28.6 SN74AHCT138NSR SO NS 16 2000 367.0 367.0 38.0 SN74AHCT138PWR TSSOP PW 16 2000 367.0 367.0 35.0 SN74AHCT138RGYR VQFN RGY 16 3000 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MPDS006C - FEBRUARY 1996 - REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0-8 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins - MO-153 14/16/20/56 Pins - MO-194 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated