All dimensions in mm.
80
www.harwin.com
Datamate Connectors
Male Vertical Off-The-Shelf
A selection of stocked Datamate Mix-Tek solder tail
standard layouts.
Choice to suit two PCB thicknesses and two stud lengths.
Mates with connectors shown on page 79.
HOW TO ORDER
HOW TO ORDER
no. oF PoWeR ContACts
02, 04, 06, 08, 10
no. oF PoWeR ContACts
02, 04
no. oF siGnAL ContACts
02, 04, 06, 08, 12
M80 - 5000000 XX - XX - XXX - 00 - 000
M80 - 5t1 XX 05 XX - XX - 331 - 00 - 000
POWER CONTACTS ONLY
SIGNAL AND POWER CONTACTS
CALCULAtion
AB + 14
B(No. of Power contacts - 1) x 4
CB + 9
CALCULAtion
AB + 13
B(No. of Power contacts - 1) x 4+
Total no. of Signal contacts +1
CB + 8
Refer to page 77 for stocked sizes.
Refer to page 77 for stocked sizes.
JACksCReW
M1 Jackscrew only
M2 With 3.5mm Board Mount stud
M3 With 5mm Board Mount stud
JACksCReW
M1 Jackscrew only
M2 With 3.5mm Board Mount stud
PoWeR ContACt PARt no.
331 3.5mm Tail
332 5 mm Tail
A
B
4.00 5.55
4.50
Ø1.50 Tail
3.00
Ø4.00
0.50
M2 (all threads)
5.60
Stud
Jackscrew
with Board Mount
C
Jackscrew
B
4.00
C
4.50
Ø2.20 x 2 (for Board Mount)
Ø1.60 x No. of Power Contacts
C
B 4.50
4.002.00
2.00
1.00
Ø2.20 x 2 (for Board Mount)
Ø0.65 x Total No. of Signal Contacts
Ø1.60 x No. of Power Contacts
3.00
A
B
4.00
4.50
2.00
2.00 3.00 5.55
C0.50
5.60
Tail
Ø1.50
Ø0.50
M2 (all threads)
Jackscrew
with Board Mount
Stud
3.00
Ø4.00
Jackscrew
DATAMATE MIX-TEK
Recommended PC Board Pattern
Recommended PC Board Pattern
