For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 124
AMPLIFIERS - LINEAR & POWER - SMT
HMC452ST89 / 452ST89E
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
v02.0710
General Description
Features
Functional Diagram
The HMC452ST89 & HMC452ST89E are high
dynamic range GaAs InGaP HBT 1 Watt MMIC power
ampli ers operating from 0.4 to 2.2 GHz and packaged
in industry standard SOT89 packages. Utilizing a
minimum number of external components and a single
+5V supply, the ampli er output IP3 can be optimized
to +45 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The
high output IP3 and PAE make the HMC452ST89 &
HMC452ST89E ideal power ampli ers for Cellular/
PCS/3G and Fixed Wireless applications.
Output IP3: +49 dBm
21 dB Gain @ 400 MHz
9 dB Gain @ 2100 MHz
50% PAE @ +31 dBm Pout
+25 dBm CDMA2000 Channel Power
@ -45 dBc ACP
Included in the HMC-DK002 Designers Kit
Electrical Speci cations, TA = +25°C, Vs= +5V [1]
Typical Applications
The HMC452ST89 / HMC452ST89E is ideal for
applications requiring a high dynamic range ampli er:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• CATV/Cable Modem
• Fixed Wireless
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 400 - 410 450 - 496 810 - 960 1710 - 1990 2010 - 2170 MHz
Gain 19 21 18 20 13.5 15.5 7 9.5 7 9 dB
Gain Variation Over
Temperature 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 dB /
°C
Input Return Loss 22 16 13 13 20 dB
Output Return Loss 11 11 14 15 15 dB
Output Power for
1dB
Compression (P1dB)
27 30 27 30 27.5 30.5 28 31 28.5 31.5 dBm
Saturated Output
Power (Psat) 30.5 30.5 31.5 31.5 32 dBm
Output Third Order
Intercept (IP3) [2] 42 45 42 45 44 47 45 48 46 49 dBm
Noise Figure 6.5 7 6.5 6.5 6.5 dB
Supply Current (Icq) 510 510 510 510 510 mA
[1] Speci cations and data re ect HMC452ST89 measured using the respective application circuits for each designated frequency band found
herein. Contact the HMC Applications Group for assistance in optimizing performance for your application.
[2] Two-tone input power of 0 dBm per tone, 1 MHz spacing.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 125
Input Return Loss
vs. Temperature @ 400 MHz
Output Return Loss
vs. Temperature @ 400 MHz
Broadband Gain
& Return Loss @ 400 MHz Gain vs. Temperature @ 400 MHz
P1dB vs. Temperature @ 400 MHz Psat vs. Temperature @ 400 MHz
-15
-10
-5
0
5
10
15
20
25
0.1 0.2 0.3 0.4 0.5 0.6 0.7
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
-16
-14
-12
-10
-8
-6
-4
-2
0
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
-35
-30
-25
-20
-15
-10
-5
0
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
12
13
14
15
16
17
18
19
20
21
22
23
24
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
GAIN (dB)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 126
AMPLIFIERS - LINEAR & POWER - SMT
Output IP3 vs. Temperature @ 400 MHz
Noise Figure
vs. Temperature @ 400 MHz
Gain, Power & IP3
vs. Supply Voltage @ 400 MHz
Reverse Isolation
vs. Temperature @ 400 MHz
ACPR vs. Supply Voltage @ 400 MHz
W-CDMA, 64 DPCH
Power Compression @ 400 MHz
10
15
20
25
30
35
40
45
50
4.5 4.75 5 5.25 5.5
Gain
P1dB
Psat
OIP3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
Vs (Vdc)
-30
-25
-20
-15
-10
-5
0
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
45
50
55
0246810121416
Pout
Gain
PAE
Pout (dBm), Gain (dB), PAE (%)
INPUT POWER (dBm)
30
32
34
36
38
40
42
44
46
48
50
0.35 0.37 0.39 0.41 0.43 0.45
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
8 10121416182022242628
ACPR (dBc)
Channel Power (dBm)
W-CDMA
Frequency: 400 MHz
Integration BW: 3.84 MHz
64 DPCH
5V
4.5V
5.5V
Source ACPR
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 127
Input Return Loss
vs. Temperature @ 470 MHz
Output Return Loss
vs. Temperature @ 470 MHz
Broadband Gain
& Return Loss @ 470 MHz Gain vs. Temperature @ 470 MHz
P1dB vs. Temperature @ 470 MHz Psat vs. Temperature @ 470 MHz
-20
-15
-10
-5
0
5
10
15
20
25
0.1 0.2 0.3 0.4 0.5 0.6 0.7
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
-16
-14
-12
-10
-8
-6
-4
-2
0
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
12
13
14
15
16
17
18
19
20
21
22
23
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
GAIN (dB)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 128
AMPLIFIERS - LINEAR & POWER - SMT
Output IP3 vs. Temperature @ 470 MHz
Noise Figure
vs. Temperature @ 470 MHz
Gain, Power & IP3
vs. Supply Voltage @ 470 MHz
Reverse Isolation
vs. Temperature @ 470 MHz
ACPR vs. Supply Voltage @ 470 MHz
W-CDMA, 64 DPCH
Power Compression @ 470 MHz
10
15
20
25
30
35
40
45
50
4.5 4.75 5 5.25 5.5
Gain
P1dB
Psat
OIP3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
Vs (Vdc)
0
5
10
15
20
25
30
35
40
45
50
55
0246810121416
Pout
Gain
PAE
Pout (dBm), Gain (dB), PAE (%)
INPUT POWER (dBm)
-35
-30
-25
-20
-15
-10
-5
0
0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
30
32
34
36
38
40
42
44
46
48
50
0.43 0.45 0.47 0.49 0.51 0.53
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
8 10121416182022242628
ACPR (dBc)
Channel Power (dBm)
W-CDMA
Frequency: 470 MHz
Integration BW: 3.84 MHz
64 DPCH
5V
4.5V
5.5V
Source ACPR
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 129
Input Return Loss
vs. Temperature @ 900 MHz
Output Return Loss
vs. Temperature @ 900 MHz
Broadband Gain
& Return Loss @ 900 MHz Gain vs. Temperature @ 900 MHz
P1dB vs. Temperature @ 900 MHz Psat vs. Temperature @ 900 MHz
-20
-15
-10
-5
0
5
10
15
20
0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
8
9
10
11
12
13
14
15
16
17
18
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
GAIN (dB)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 130
AMPLIFIERS - LINEAR & POWER - SMT
Output IP3 vs. Temperature @ 900 MHz
Noise Figure
vs. Temperature @ 900 MHz
Gain, Power & IP3
vs. Supply Voltage @ 900 MHz
Reverse Isolation
vs. Temperature @ 900 MHz
ACPR vs. Supply Voltage @ 910 MHz
CDMA IS95, 9 Channels Forward
Power Compression @ 900 MHz
10
15
20
25
30
35
40
45
50
4.5 4.75 5 5.25 5.5
Gain
P1dB
Psat
OIP3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm
)
Vs (Vdc)
-30
-25
-20
-15
-10
-5
0
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
45
50
55
4 6 8 10121416182022
Pout
Gain
PAE
Pout (dBm), Gain (dB), PAE (%)
INPUT POWER (dBm)
0
1
2
3
4
5
6
7
8
9
10
0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
30
32
34
36
38
40
42
44
46
48
50
0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
8 101214161820222426
ACPR (dBc)
Channel Power (dBm)
CDMA IS95
Frequency: 910 MHz
Integration BW: 1.228 MHz
Forward Link, 9 Channels
5V
4.5V
5.5V
Source ACPR
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 131
Input Return Loss
vs. Temperature @ 1900 MHz
Output Return Loss
vs. Temperature @ 1900 MHz
Broadband Gain
& Return Loss @ 1900 MHz Gain vs. Temperature @ 1900 MHz
P1dB vs. Temperature @ 1900 MHz Psat vs. Temperature @ 1900 MHz
-25
-20
-15
-10
-5
0
5
10
15
1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
1.7 1.8 1.9 2 2.1
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 132
AMPLIFIERS - LINEAR & POWER - SMT
Output IP3 vs. Temperature @ 1900 MHz
Noise Figure
vs. Temperature @ 1900 MHz
Gain, Power & IP3
vs. Supply Voltage @ 1900 MHz
Reverse Isolation
vs. Temperature @ 1900 MHz
ACPR vs. Supply Voltage @ 1960 MHz
CDMA 2000, 9 Channels Forward
Power Compression @ 1900 MHz
0
1
2
3
4
5
6
7
8
9
10
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
5
10
15
20
25
30
35
40
45
50
55
4.5 4.75 5 5.25 5.5
Gain
P1dB
Psat
OIP3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
Vs (Vdc)
0
5
10
15
20
25
30
35
40
45
50
10 12 14 16 18 20 22 24 26
Pout
Gain
PAE
Pout (dBm), Gain (dB), PAE (%)
Input Power (dBm)
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
-30
14 16 18 20 22 24 26 28
ACPR (dBc)
Output Channel Power (dBm)
CDMA2000
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
5.5V
4.5V
5V
30
32
34
36
38
40
42
44
46
48
50
52
1.7 1.8 1.9 2 2.1
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 133
Input Return Loss
vs. Temperature @ 2100 MHz
Output Return Loss
vs. Temperature @ 2100 MHz
Broadband Gain
& Return Loss @ 2100 MHz Gain vs. Temperature @ 2100 MHz
P1dB vs. Temperature @ 2100 MHz Psat vs. Temperature @ 2100 MHz
-30
-25
-20
-15
-10
-5
0
5
10
15
1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
11
12
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
GAIN (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
24
25
26
27
28
29
30
31
32
33
34
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 134
AMPLIFIERS - LINEAR & POWER - SMT
Output IP3 vs. Temperature @ 2100 MHz
Noise Figure
vs. Temperature @ 2100 MHz
Gain, Power & IP3
vs. Supply Voltage @ 2100 MHz
Reverse Isolation
vs. Temperature @ 2100 MHz
ACPR vs. Supply Voltage @ 2140 MHz
W-CDMA, 64 DPCH
Power Compression @ 2100 MHz
30
32
34
36
38
40
42
44
46
48
50
52
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
OIP3 (dBm)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
1.6 1.7 1.8 1.9 2 2.1 2.2 2.3
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
5
10
15
20
25
30
35
40
45
50
55
4.5 4.75 5 5.25 5.5
Gain
P1dB
Psat
OIP3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
Vs (Vdc)
0
5
10
15
20
25
30
35
40
45
50
10 12 14 16 18 20 22 24 26 28
Pout
Gain
PAE
Pout (dBm), Gain (dB), PAE (%)
Input Power (dBm)
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
12 14 16 18 20 22 24 26 28
ACPR (dBc)
OUTPUT CHANNEL POWER (dBm)
Source ACPR
W-CDMA
Frequency: 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
5V
5.5V
4.5V
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 135
Outline Drawing
Absolute Maximum Ratings
Collector Bias Voltage (Vcc) +6.0 Vdc
RF Input Power (RFIN)(Vs +5Vdc) +31 dBm
Junction Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 41.5 mW/°C above 85 °C) 2.7 W
Thermal Resistance
(junction to ground paddle) 24.1 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
Power Dissipation
1
1.5
2
2.5
3
0 5 10 15 20 25
POWER DISSIPATION (W)
INPUT POWER (dBm)
1900 MHz
2100 MHz
Max Pdiss @ +85C
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC452ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H452
XXXX
HMC452ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H452
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 136
AMPLIFIERS - LINEAR & POWER - SMT
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
Note: C2 should be placed as close to pins as possible.
TL1 TL2 TL3 TL4 TL5
Impedance 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm
Physical Length 0.09 0.08 0.17 0.04” 0.25”
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
C1 12 pF
C2 15 pF
C3, C4 6.8 pF
C5 39 pF
C6 100 pF
C7 2.2 μF
L1 47 nH
L2 40 nH
L3 4.3 nH
L4 5.1 nH
R1 5.1 Ohm
Pin Descriptions
Pin Number Function Description Interface Schematic
1RFIN
This pin is DC coupled.
Off chip matching components are required.
See Application Circuit herein.
3RFOUT
RF output and DC Bias input for the output ampli er stage.
Off chip matching components are required.
See Application Circuit herein.
2, 4 GND These pins & package bottom must be connected to
RF/DC ground.
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 137
400 MHz Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 110409-400 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1 12 pF Capacitor, 0402 Pkg.
C2 15 pF Capacitor, 0402 Pkg.
C3, C4 6.8 pF Capacitor, 0402 Pkg.
C5 39 pF Capacitor, 0402 Pkg.
C6 100 pF Capacitor, 0402 Pkg.
C7 2.2 μF Capacitor, Tantalum
L1 47 nH Inductor, 0603 Pkg.
L2 40 nH Inductor, 0402 Pkg.
L3 4.3 nH Inductor, 0402 Pkg.
L4 5.1 nH Inductor, 0402 Pkg.
R1 5.1 Ohm Resistor, 0402 Pkg.
U1 HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2] 110407 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 138
AMPLIFIERS - LINEAR & POWER - SMT
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
Note: C2 should be placed as close to pins as possible.
TL1 TL2 TL3 TL4 TL5
Impedance 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm
Physical Length 0.09 0.08 0.17 0.04” 0.25”
Electrical Length 2. 1°
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
C1, C2 12 pF
C3 6.8 pF
C4 5.6 pF
C5 39 pF
C6 100 pF
C7 2.2 μF
L1 47 nH
L2 40 nH
L3 4.7 nH
L4 3.9 nH
R1 5.1 Ohm
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 139
470 MHz Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 110416-470 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1, C2 12 pF Capacitor, 0402 Pkg.
C3 6.8 pF Capacitor, 0402 Pkg.
C4 5.6 pF Capacitor, 0402 Pkg.
C5 39 pF Capacitor, 0402 Pkg.
C6 100 pF Capacitor, 0402 Pkg.
C7 2.2 μF Capacitor, Tantalum
L1 47 nH Inductor, 0603 Pkg.
L2 40 nH Inductor, 0402 Pkg.
L3 4.7 nH Inductor, 0402 Pkg.
L4 3.9 nH Inductor, 0402 Pkg.
R1 5.1 Ohm Resistor, 0402 Pkg.
U1 HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2] 110407 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 140
AMPLIFIERS - LINEAR & POWER - SMT
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
Note: C2 should be placed as close to pins as possible.
TL1 TL2 TL3
Impedance 50 Ohm 50 Ohm 50 Ohm
Physical Length 0.21 0.13” 0.38
Electrical Length 11° 20°
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
C1 27 pF
C2 6.8 pF
C3 2.2 pF
C4 4.7 pF
C5 5.6 pF
C6 100 pF
C7 2.2 μF
L1 20 nH
R1 5.1 Ohm
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 141
900 MHz Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 110384-900 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1 27 pF Capacitor, 0402 Pkg.
C2 6.8 pF Capacitor, 0402 Pkg.
C3 2.2 pF Capacitor, 0402 Pkg.
C4 4.7 pF Capacitor, 0402 Pkg.
C5 5.6 pF Capacitor, 0402 Pkg.
C6 100 pF Capacitor, 0402 Pkg.
C7 2.2 μF Capacitor, Tantalum
L1 20 nH Inductor, 0402 Pkg.
R1 5.1 Ohm Resistor, 0402 Pkg.
U1 HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2] 110382 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 142
AMPLIFIERS - LINEAR & POWER - SMT
1900 MHz Application Circuit
This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
Note: C2 should be placed as close to pins as possible.
TL1 TL2
Impedance 50 Ohm 50 Ohm
Physical Length 0.04” 0.10”
Electrical Length 4° 1
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
C1 3 pF
C2 2 pF
C3 3.3 pF
C4 15 pF
C5 100 pF
C6 2.2 μF
L1 10 nH
L2 12 nH
R1 5.1 Ohm
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 143
1900 MHz Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 108712-1900 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1 3 pF Capacitor, 0402 Pkg.
C2 2 pF Capacitor, 0402 Pkg.
C3 3.3 pF Capacitor, 0402 Pkg.
C4 15 pF Capacitor, 0402 Pkg.
C5 100 pF Capacitor, 0402 Pkg.
C6 2.2 μF Capacitor, Tantalum
L1 10 nH Inductor, 0402 Pkg.
L2 12 nH Inductor, 0402 Pkg.
R1 5.1 Ohm Resistor, 0402 Pkg.
U1 HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2] 108710 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9
9 - 144
AMPLIFIERS - LINEAR & POWER - SMT
2100 MHz Application Circuit
This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
Recommended Component Values
C1 3 pF
C2 2 pF
C3 3.3 pF
C4 15 pF
C5 100 pF
C6 2.2 μF
L1 12 nH
L2 10 nH
R1 5.1 Ohm
TL1 TL2
Impedance 50 Ohm 50 Ohm
Physical Length 0.04” 0.04”
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 145
2100 MHz Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 109824-2100 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1 3 pF Capacitor, 0402 Pkg.
C2 2 pF Capacitor, 0402 Pkg.
C3 3.3 pF Capacitor, 0402 Pkg.
C4 15 pF Capacitor, 0402 Pkg.
C5 100 pF Capacitor, 0402 Pkg.
C6 2.2 μF Capacitor, Tantalum
L1 12 nH Inductor, 0402 Pkg.
L2 10 nH Inductor, 0402 Pkg.
R1 5.1 Ohm Resistor, 0402 Pkg.
U1 HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2] 109822 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
HMC452ST89E HMC452QS16GE HMC452QS16GETR HMC452ST89ETR HMC452ST89 108712-HMC452ST89
110384-HMC452ST89 HMC452ST89TR 110409-HMC452ST89 110381-HMC452QS16G 108703-HMC452QS16G
108715-HMC452QS16G 110380-HMC452QS16G 110416-HMC452ST89 111041-HMC452QS16G 109824-
HMC452ST89