1N5624GP THRU 1N5627GP
Glass Passivated Junction Rectifier
Reverse V oltage 200 to 800 V
Forward Current 3.0 A
Patented*
0.210 (5.3)
0.190 (4.8)
DIA.
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5624GP 1N5625GP 1N5626GP 1N5627GP UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 V
* Maximum DC blocking voltage VDC 200 400 600 800 V
* Maximum average forward rectified current
0.375" (9.5mm) lead lengths at TA=70°C IF(AV) 3.0 A
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) IFSM 125 A
Maximum full load reverse current, full cycle
average, 0.375" (9.5mm) lead length at TA=70°C IR(AV) 200 µA
Typical thermal resistance (NOTE 1) RΘJA 20 °C/W
Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5624GP 1N5625GP 1N5626GP 1N5627GP UNITS
* Maximum instantaneous forward voltage at 3.0A TA=25°C 1.0
TA=70°C VF0.95 V
Maximum reverse current TA=25°C 5.0
at rated DC blocking voltage TA=150°C IR300 200 µA
Typical reverse recovery time at
IF=0.5A, IR=1.0A, Irr=0.25A trr 3.0 µs
Typical junction capacitance at 4.0V, 1MHz CJ40 pF
NOTES:
(1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
DO-201AD
8/5/99
Features
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Cavity-free glass passivated junction
• Capable of meeting environmental standards of
MIL-S-19500
• 3.0 Ampere operation at TA=70°C with no thermal
runaway
• Typical IRless than 0.1µA
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-201AD, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.12 grams
®
Dimensions in inches and (millimeters)
*
Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
0 25 50 75 100 125 150 175
0
1.0
2.0
3.0
4.0
110 100
10
100
200
0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
0.1
1
10
100
110 100
10
100
020 40 60 80 100
0.01
0.1
1
10
FIG. 1 - FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
REVERSE VOLTAGE, VOLTS
TJ=150°C
TJ=100°C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
0.375"(9.5mm) LEAD LENGTH
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
TJ=25°C
1N5624GP THRU 1N5627GP
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)
