1N5624GP THRU 1N5627GP Glass Passivated Junction Rectifier * d e t n Features e t a P DO-201AD * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * 3.0 Ampere operation at TA=70C with no thermal runaway * Typical IR less than 0.1A * High temperature soldering guaranteed: 350C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. (R) Reverse Voltage 200 to 800 V Forward Current 3.0 A 0.375 (9.5) 0.285 (7.2) 0.052 (1.32) 0.048 (1.22) DIA. Mechanical Data 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 Case: JEDEC DO-201AD, molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.12 grams Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. * Maximum repetitive peak reverse voltage SYMBOLS 1N5624GP 1N5625GP 1N5626GP 1N5627GP UNITS VRRM 200 400 600 800 V * Maximum DC blocking voltage VDC 200 400 600 800 V * Maximum average forward rectified current 0.375" (9.5mm) lead lengths at TA=70C IF(AV) 3.0 A * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TA=70C IR(AV) 200 A Typical thermal resistance (NOTE 1) RJA 20 C/W TJ, TSTG -65 to +175 C Operating junction and storage temperature range Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. SYMBOLS * Maximum instantaneous forward voltage at 3.0A Maximum reverse current at rated DC blocking voltage TA=25C TA=70C VF TA=25C TA=150C IR 1N5624GP 1N5625GP 1N5626GP 1N5627GP UNITS 1.0 0.95 V 5.0 300 A 200 Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 3.0 s Typical junction capacitance at 4.0V, 1MHz CJ 40 pF NOTES: (1) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted *JEDEC registered values 8/5/99 1N5624GP THRU 1N5627GP Ratings and Characteristic Curves (T A = 25C unless otherwise noted) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 4.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 3.0 2.0 1.0 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 10 175 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 10 1 AMBIENT TEMPERATURE, C 10 TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE 1 TJ=150C 1 TJ=100C 0.1 TJ=25C 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25C f=1.0 MHZ Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100 100