SHINDENGEN Sidac G1V(A)10C OUTLINE DIMENSIONS Case : AX06 (Unit : mm) RATINGS Absolute Maximum Ratings iUnless otherwise specified, Tl=25j Item Symbol Conditions Tstg Storage Temperature Tj Operating Junction Temperature VDRM(A) Maximum Off-state Voltage RMS On-state Current IT Pulse On-state Current ITRM diT/dt Critical Rate of Rise of On-state Current Ratings -40125 125 90 1 Tl = 98, 50Hz Sine wave (AE = 180) 80 Ta = 25 , Pulse width 10Es, 60 Hz Sine wave 80 Electrical Characteristics iUnless otherwise specified, Tl=25j Item Symbol Conditions VBO(A) Pulse measurement (dv/dt = 4V/ms) Breakover Voltage Off-state Current Breakover Current Holding Current On-state Voltage Switching Resistance Thermal Resistance IDRM(A) IBO(A) IH(A) IH(K) VT(A) VT(K) RS(A) AEjl VD = VDRM(A) IT = 1A Unit V A A A/Es Ratings Min 95 Max 110 Max 10 Max 0.5 Max 60 Unit V Max 1.5 V Min 0.1 Max 20 k /W EA mA mA IT = 1A Junction to lead Copyright & Copy;2003 Shindengen Electric Mfg.Co., Ltd. G1V(A)10C On-State Voltage - On-State Current On-State Current IT [A] 10 Tl=125C[TYP] Tl= 25C[TYP] 1 TYP Pulse test 0.4 0.6 0.8 1 1.2 On-State Voltage VT [V] 1.4 1.6 G1V(A)10C Break Over Voltage - Junction Temperature Ratio of VBO(TjC) / VBO(25C) 1.2 1.15 1.1 1.05 1 0.95 0.9 TYP Pulse test Peak hold method 0.85 0.8 -40 -20 0 20 40 Junction Temperature 60 Tj [C] 80 100 120 G1V(A)10C Holding Current - Junction Temperature 3 Ratio of IH(TjC) / IH(25C) TYP Pulse test 2.5 2 1.5 1 0.5 0 -40 -20 0 20 40 Junction Temperature 60 Tj [C] 80 100 120 G1V(A)10C Pulse On-state Current Rating f=30Hz 1000 Current Wave Form Ip Pulse On-state Current (peak value) ITP [A] 500 0 diT / dt limit line to 1/f 200 100 Ta=25C Ta=70C 50 20 10 2 5 10 100 to [ s] Pulse Base Width 200