XCA170 SINGLE POLE OptoMOS(R) Relay Load Voltage Load Current Max RON XCA170 350 100 50 Description XCA170 is a 350V, 100mA, 50 1-Form-A relay. It features high sensitivity in an economical product. Units V mA Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # XCA170 XCA170S XCA170STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration XCA170 Pinout XCA170 Pinout AC/DC Configuration DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Control Load - Control Do Not Use Do Not Use Load 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-XCA170-R2 www.clare.com TOFF 1 XCA170 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 C +125 C - - +260 +220 C C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 350 V 10ms IL IL ILPK - - 100 180 350 mA mA mA IL=120mA IL=200mA VL=35OV RON RON ILEAK - 31 10 - 50 15 1 A IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT ICL - 25 - 5 5 - ms ms pF mA - - - 3 - pF IL=120mA IF=5mA VR=5V - IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 0.7 1.2 3 - 50 1.4 5 10 - mA mA V V A pF VRMS www.clare.com Rev. 2 XCA170 PERFORMANCE DATA* XCA170 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 35 Device Count (N) 25 20 15 10 5 25 25 20 20 15 10 5 1.17 1.19 1.21 1.23 1.25 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) XCA170 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) XCA170 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 25 20 20 20 15 10 5 0 Device Count (N) 25 Device Count (N) 15 10 5 0.44 0.50 0.56 0.62 0.69 0.75 0.81 0.44 0.50 LED Current (mA) Load Current (mA) 20 15 10 5 0.56 0.62 0.69 0.75 0.67 0.81 0.22 160 0.016 140 0.014 120 0.012 100 80 10mA 5mA 2mA 60 40 0.25 XCA170 Typical Blocking Voltage vs. Temperature -20 0 20 40 60 80 100 Turn-On (ms) 440 435 430 -20 0 20 40 60 Temperature (C) 80 100 0.006 0 20 40 60 80 XCA170 Typical Turn-Off vs. Temperature (Load Current = 100mADC) 5mA 1.20 1.00 10mA 0.80 20mA 0.60 0 -40 -20 XCA170 Typical Turn-On vs. Temperature (Load Current = 100mADC) 0.20 420 0.008 Temperature (C) 0.40 425 0.010 -40 1.40 445 1.14 Temperature (C) 1.60 450 1.06 0 120 1.80 455 0.99 0.002 -40 0.28 0.91 0.004 Turn-Off (ms) -40 0.83 XCA170 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0 0 0.19 0.75 Turn-On (ms) 20 0.17 5 XCA170 Typical Load Current vs. Temperature 25 0.14 10 LED Current (mA) XCA170 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 0.11 15 0 0 Leakage (A) Device Count (N) 5 On-Resistance () XCA170 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) Device Count (N) 10 29.09 29.86 30.63 31.40 32.16 32.93 33.70 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 15 0 0 0 -20 0 20 40 60 Temperature (C) 80 100 120 Turn-Off (ms) Device Count (N) 30 XCA170 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) XCA170 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 100 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 3 XCA170 PERFORMANCE DATA* XCA170 Typical LED Forward Voltage Drop vs. Temperature 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 0 10 15 20 25 30 35 40 45 0 50 5 10 15 20 25 30 35 40 45 LED Forward Current (mA) LED Forward Current (mA) XCA170 Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 2mADC) XCA170 Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) XCA170 Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) LED Current (mA) 60 On-Resistance () 5 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Temperature (C) 70 50 40 30 20 6.0 5.0 5.0 3.0 2.0 -40 -20 0 20 40 60 80 100 120 -40 -3 -2 -1 0 1 Load Voltage (V) 2 3 4 3.0 2.0 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (C) XCA170 Energy Rating Curve Load Current (A) -4 -20 Temperature (C) XCA170 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC 4.0 0 0 Temperature (C) 50 1.0 1.0 0 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 6.0 4.0 10 Load Current (mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) Turn-On (ms) 1.6 LED Current (mA) LED Forward Voltage Drop (V) 1.8 1.4 XCA170 Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) XCA170 Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 XCA170 Mechanical Dimensions 8.382 .635 (.330 .025) 6 Pin DIP Through Hole (Standard) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) 3.302 (.130) 6.350 .127 (.250 .005) 9.144 .508 (.360 .020) 9.144 (.360) (.100 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .254 TYP. (.010) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 3.302 (.130) 2.540 .127 (.100 .005) 5.080 .127 (.200 .005) 8.382 .635 (.330 .025) 7.620 .254 (.300 .010) .635 TYP. (.025) 6-.800 DIA. (6-.031 DIA.) .457 .076 (.018 .003) 6 Pin DIP Surface Mount ("S" Suffix) 4.445 .127 (.175 .005) PC Board Pattern (Top View) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 1.499 .127 (.059 .005) Dimensions mm (inches) Rev. 2 www.clare.com 5 XCA170 Mechanical Dimensions Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.100 .102 (.398 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) 6 www.clare.com Rev. 2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-XCA170-R2.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02