1
www.clare.com
XCA170
DS-XCA170-R2
XCA170 is a 350V, 100mA, 501-Form-A relay. It fea-
tures high sensitivity in an economical product.
Telecommunications
Telecom Switching
Tip/Ring Circuits
Modem Switching (Laptop, Notebook, Pocket Size)
Hookswitch
Dial Pulsing
Ground Start
Ringer Injection
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
UL Recognized: File Number E76270
CSA Certified: File Number LR 43639-10
BSI Certified to:
BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
BS EN 41003:1993
Certificate #: 7344
Small 6 Pin DIP Package
Low Drive Power Requirements (TTL/CMOS
Compatible)
No Moving Parts
High Reliability
Arc-Free With No Snubbing Circuits
3750VRMS Input/Output Isolation
FCC Compatible
VDE Compatible
No EMI/RFI Generation
Machine Insertable, Wave Solderable
Surface Mount and Tape & Reel
V ersions A vailable
Applications
Features
Description
Approvals
SINGLE POLE OptoMOS®Relay
Ordering Information
Part # Description
XCA170 6 Pin DIP (50/Tube)
XCA170S 6 Pin Surface Mount (50/Tube)
XCA170STR 6 Pin Surface Mount (1000/Reel)
XCA170 Units
Load Voltage 350 V
Load Current 100 mA
Max RON 50
Pin Configuration
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
LOAD
10ms
10% 10%
90%
+
TON TOFF
+
+
1
3
2
4
5
6
+ Control
– Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
XCA170 Pinout
1
3
2
4
5
6
+ Control
Control
Do Not Use
+ Load
Load
DC Only Configuration
XCA170 Pinout
www.clare.com
XCA170
Rev. 2
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - VL- - 350 V
Load Current (Continuous)
AC/DC Configuration - IL- - 100 mA
DC Configuration - IL- - 180 mA
Peak Load Current 10ms ILPK - - 350 mA
On-Resistance
AC/DC Configuration IL=120mA RON -3150
DC Configuration IL=200mA RON -1015
Off-State Leakage Current VL=35OV ILEAK -- 1µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON -- 5ms
Turn-Off IF=5mA, VL=10V TOFF -- 5ms
Output Capacitance 50V; f=1MHz COUT -25 - pF
Load Current Limiting ICL -- -mA
Capacitance
Input to Output - - - 3 - pF
Input Characteristics @ 25°C
Input Control Current IL=120mA IF5-50mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR-- 5V
Reverse Input Current VR=5V IR- - 10 µA
Input to Output Capacitance - CI/O -3 -pF
Input to Output Isolation - VI/O 3750 - - VRMS
XCA170
Rev. 2
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
3
XCA170
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
XCA170
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
25
20
15
10
5
029.09 30.63 32.16 33.7029.86 31.40 32.93
On-Resistance ()
Device Count (N)
XCA170
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
25
20
15
10
5
0424.0 434.5 444.9 455.4429.3 439.7 450.1
Blocking Voltage (V)
Device Count (N)
XCA170
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
XCA170
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC
25
20
15
10
5
00.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
)
XCA170
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.67 0.83 0.99 1.140.75 0.91 1.06
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
XCA170
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
455
450
445
440
435
430
425
420 -20 0 20 40 60 80 100
XCA170
Typical Turn-On vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
5mA
10mA
20mA
Turn-On (ms)
-40
1.80
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0-20 0 20 40 60 80 100 120
XCA170
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.11 0.17 0.22 0.280.250.190.14
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
XCA170
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
10mA
2mA
5mA
XCA170
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0-20 0 20 40 60 80 100
XCA170
Typical Turn-Off vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0-20 0 20 40 60 80 100 120
www.clare.com
4
XCA170
Rev. 2
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
XCA170
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
5mA
XCA170
Typical Turn-On vs. LED Forward Current
(Load Current = 100mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
050
XCA170
Typical On-Resistance vs. Temperature
(Load Current = 100mADC; IF = 2mADC)
Temperature (°C)
On-Resistance ()
-40
70
60
50
40
30
20
10
0-20 0 20 40 60 80 100 120
XCA170
Typical IF for Switch Operation
vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100 120
XCA170
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100 120
XCA170
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
120
100
80
60
40
20
0
-20
-40
-60
-80
-100
-120 -3-4 -2 -1 0 1 2 3 4
XCA170
Energy Rating Curve
Time
Load Current (A)
10µs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
01ms100µs 100ms 1s
10ms 10s 100s
XCA170
www.clare.com 5
Rev. 2
Dimensions
mm
(inches)
Mechanical Dimensions
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
5.080 ± .127
(.200 ± .005)
6-.800 DIA.
(6-.031 DIA.)
6.350 ± .127
(.250 ± .005)
8.382 ± .635
(.330 ± .025)
2.540 ± .127
(.100 ± .005)
9.144
(.360)
.457 ± .076
(.018 ± .003)
6 Pin DIP Through Hole (Standard)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 ± .508
(.360 ± .020)
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.499 ± .127
(.059 ± .005)
4.445 ± .127
(.175 ± .005) 3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.382 ± .635
(.330 ± .025)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
6 Pin DIP Surface Mount (S Suffix)
www.clare.com
6
XCA170
Rev. 2
Dimensions
mm
(inches)
Mechanical Dimensions
Tape and Reel Packaging for 6 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
330.2 DIA.
(13.00) 1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.100
(.398)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.100 ± .102
(.398 ± .004) 1.549 ± .102
(.061 ± .004)
16
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-XCA170-R2.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02
For additional information please visit our website at: www.clare.com