0603HC-15NXGLW - Coilcraft

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

1. When ordering, specify tolerance, termination and packaging codes:

0603HC-24NXJEW

Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.)

Termination: E = Halogen free component. RoHS compliant silver-

palladium-platinum-glass frit terminations.

L = RoHS compliant, not halogen-free. Silver-palladium-

platinum-glass frit terminations.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5)

or S = non-RoHS tin-lead (63/37).

Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape

(2000 parts per full reel).

U = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use

code letter W instead.

2. Inductance measured at 250 MHz using Coilcraft SMD-A ﬁxture in

Agilent/HP 4286 impedance analyzer with Coilcraft-provided correla-

tion pieces.

3. Tolerances in bold are stocked for immediate shipment.

4. Q measured at 250 MHz using Agilent/HP 4291A with Agilent/

HP 16193 test ﬁxture.

5. SRF measured using Agilent/HP 8720D network analyzer and Coil-

craft SMD-D test ﬁxture.

6. DCR measured on micro-ohmmeter and Coilcraft CCF858 test ﬁxture.

7. Current that causes a 20°C temperature rise from 25°C ambient. This

information is for reference only and does not represent absolute

maximum ratings.

8. Each part is marked with a single dot. The color dots are not unique

identiﬁers and correspond to multiple inductance values.

9. Electrical speciﬁcations at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Chip Inductors

–

0603HC (1608)

Document 218-1

With their high current ratings and ultra-small size, these

chip inductors are ideal for today’s high frequency, low

voltage applications like mobile phones. They feature

continuous current ratings up to 2.4 Amps DC and

will handle transient currents up to 50% higher. At low

inductance values, their Q factors are also higher than

our 0603CS Series.

SRF DCR

Inductance2 Percent Q 900 MHz 1.7 GHz min5 max6 Irms7 Color

Part number1 (nH)

tolerance3 min4 L typ Q typ L typ Q typ (MHz) (Ohms) (A) code8

0603HC-1N6XJE_ 1.6 5 24 1.67 49 1.65 63 12500 0.030 2.4 Black

0603HC-3N6XJE_ 3.6 5 24 3.65 70 3.75 90 5900 0.048 2.3 Brown

0603HC-3N9XJE_ 3.9 5 25 3.74 70 3.90 90 5900 0.054 2.2 Red

0603HC-6N8XJE_ 6.8 5 35 6.72 70 7.10 75 5800 0.054 2.1 Orange

0603HC-7N5XJE_ 7.5 5 38 7.33 70 7.90 68 3700 0.059 2.1 Yellow

0603HC-10NX_E_ 10 5,2 38 9.70 73 10.5 57 3700 0.071 2.0 Green

0603HC-12NX_E_ 12 5,2 38 12.3 68 14.5 41 3000 0.075 2.0 Blue

0603HC-15NX_E_ 15 5,2 38 15.5 65 17.6 40 2800 0.080 1.9 Violet

0603HC-18NX_E_ 18 5,2 40 19.5 62 25.0 40 2800 0.099 1.9 Gray

0603HC-22NX_E_ 22 5,2 42 24.0 61 31.5 26 2400 0.099 1.8 White

0603HC-24NX_E_ 24 5,2 42 25.8 55 35.0 21 2400 0.105 1.8 Black

0603HC-33NXJE_ 33 5 47 34.3 50 — — 1900 0.175 0.95 Brown

0603HC-47NXJE_ 47 5 40 49.5 45 — — 1530 0.195 0.85 Red

Designer’s Kit C339 contains 10 of each of all 5% parts

Core material Ceramic

Environmental RoHS compliant, halogen free

Terminations Silver-palladium-platinum-glass frit.

Weight 3.3 – 3.7 mg

Ambient temperature –40°C to +125°C with Irms current

Maximum part temperature +145°C (ambient + temp rise).

Storage temperature Component: –40°C to +145°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Temperature Coefﬁcient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 1.0 mm thick,

4 mm pocket spacing

PCB washing Tested to MIL-STD-202 Method 215 plus an additional

aqueous wash. See Doc787_PCB_Washing.pdf.

Document 218-1 Revised 10/12/15

Sample

& buy

Support

& FAQ

Web

page

Tools &

softw

are

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

HIGH CURRENT

0603HC (1608) Chip Inductors

Document 218-2 Revised 10/12/15

Document 218-2

Typical L vs Frequency

overall

Terminal wraparound:

approx 0.008/0,20 both ends

terminal

Recommended

Land Pattern

Pick and

place

material

A B C D

max max max ref E F G H I J

0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches

1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm

100

110 100 1000

10000

Frequency (MHz)

Q Factor

5.6 nH3.6 nH

6.8 nH

15 nH

22 nH

110 100 1000

10000

Frequency (MHz)

Inductance (nH)

3.6 nH

6.8 nH

15 nH

22 nH

Typical Q vs Frequency

Note: Height dimension (C) is before optional solder application. For maximum

height dimension including solder, add 0.006 in / 0,152 mm.