A P V- 1 6 16W Single Output Switching Power Supply series Features : Constant voltage design Universal AC input / Full range Protections: Short circuit / Over load / Over voltage Fully isolated plastic case Cooling by free air convection Small and compact size Class power unit, no FG Class 2 power unit Pass LPS IP42 design Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices) 110 SPECIFICATION MODEL OUTPUT APV-16-12 APV-16-15 APV-16-24 5V 12V 15V 24V RATED CURRENT 2.6A 1.25A 1A 0.67A CURRENT RANGE 0 ~ 2.6A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.67A RATED POWER 13W 15W 15W 16.08W 120mVp-p 120mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE TOLERANCE Note.3 5.0% SETUP, RISE TIME 1.0% 2.0% Note.6 1500ms, 30ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 20ms/230VAC Note.4 90 ~ 264VAC 1500ms,30ms / 115VAC at full load 12ms/115VAC at full load 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 76% AC CURRENT INRUSH CURRENT(Typ.) 0.3A/230VAC 0.5A/115VAC COLD START 50A(twidth=185s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 13 units (circuit breaker of type B) / 22 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT 0.25mA / 240VAC OVER LOAD Above 105% rated output power PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Note.8 SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF NOTE (except for 15V) APV-16-5 LOAD REGULATION OTHERS THOMAS SAMUEL THOMAS SAMUEL (optional) DC VOLTAGE LINE REGULATION INPUT SELV 100% full load burn-in test Low cost, high reliability 2 years warranty IS 15885(Part 2/Sec13) LPS IP42 R-41027766 80% 81% Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16V 17.5 ~ 21V 83% 27.6 ~ 32.4V Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750,CSA C22.2 No.250.0-08, ENEC EN61347-1,EN61347-2-13,EN62384 Independent,BIS IS15885(except for 15V), EAC TP TC 004,IP42 Approved; design refer to EN60950-1 I/P-O/P:3.75KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55032,EN61000-3-2 Class A,EN61000-3-3, EAC TP TC 020 Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A, EAC TP TC 020 DIMENSION 1145.7K hrs min. MIL-HDBK-217F (25) 77*40*29mm (L*W*H) PACKING 0.1Kg; 120pcs/14Kg/1.06CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model . Please contact MEAN WELL for details. 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:APV-16-SPEC 2018-09-29 A P V- 1 6 16W Single Output Switching Power Supply Mechanical Specification series Unit:mm 90 82.5 77 15010 UL1569 18AWG AC/N(Blue) AC/L(Brown) 15.5 40 19 +V(Red) -V(Black) 31 UL1569 20AWG T case 15010 29 T case: Max. Case Temperature Block Diagram I/P fosc : 67KHz EMI FILTER POWER SWITCHING RECTIFIERS RECTIFIERS & FILTER +V -V DETECTION CIRCUIT PWM CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 70 (HORIZONTAL) 60 50 40 90 100 200 210 220 230 240 250 264 INPUT VOLTAGE (VAC) 60Hz File Name:APV-16-SPEC 2018-09-29