Film Capacitors – Power Electronic Capacitors
MKP DC
Series/Type: B2562
Ordering code: B2562*
Date: May 2015
Version: 10
EPCOS AG 2015. Reproduction, publication and dissemination of this publicatio n, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar): Film Capacitors – Power Electronic Capacitors
Identification/Classification 2
(header 2 + bottom left header bar): MKP DC
Ordering code: (top right header b ar) B2562*
Series/Type: (bottom right header bar) B2562
Preliminary data (optional):
(if necessary)
Department: FILM R&D / CAP PM FILM P
Date: May 2015
Version: 10
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 2 of 21
Important notes at the end of this document.
1. Construction and general data
Test data
Voltage between terminals V
TT
1.5 V DC , 10 s
Voltage between terminals and case V
TC
4000 V AC, 10 s
Life test According to IEC 61071
Cooling
Naturally air-cooled (or forced air cooling)
Degree of protection
Indoor mounting
Reference standards
IEC 61071
RoHS compliance
Certification: UL 810-5th edition (refer to table 1.3)
Characteristics
Standard capacitance tolerance
K: ±10%
Dielectric dissipation factor (tan δ
o
) 2 • 10-4
Θ
stg
–55 ... +85 °C
Expected lifetime t
LD (co)
100 000 h at Θ
hs
+75°C (refer to section 1)
Fit rate 200 (refer to section 2)
Minimum temperature Θ
min.
–55 °C
Maximum temperature Θ
max.
+70 °C (refer to section 2)
Storage temperature Θ
stg
–55 ... +85 °C
Maximum hotspot temperature Θhs
(refer to section 1) +85 °C for diameter 85 and 90 mm
+75 °C for diameter 116 mm
Climatic category 55/70/56
Maximum altitude 2000 m above sea level
(derating curves available upon request)
Design
data
Impregnation Resin filling: Non PCB, hard polyurethane (dry type)
Mounting and grounding M12 threaded bolt on bottom of the aluminum case
Max. torque (case) M12 stud 10 Nm
Max. torque terminal Female M6: 5 Nm
Female M8: 6 Nm
Male M8: 8 Nm
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 3 of 21
Important notes at the end of this document.
1.1 Structure of ordering code
1.2 Standard types:
D (mm)
OC ending
Diameter (Ø)
Terminal type
32 ± 0.5
-**1
45 ± 0.5
-**4
50 ± 0.5
-**3
85 mm
Female M6
(B25620) standard
90 mm
Male M8
(B25623) standard
Female M6
(B25620) available
116 mm
Female M6
(B25620) standard
Other terminal configurations available upon request.
1.3 UL approved types
Diameter (Ø)
Series
85 mm B2562xC
B2562xD
90 mm all types
116 mm all types
Terminal type:
0 = Female M6
1 = Male M6
2 = Female M8
3 = Male M8
4 = Female M10
5 = Male M10
9 = special
B2562 0 B 1 427 K 10 1
MKP DC Series
Version:
B = without plastic cap
C/D = with plastic cap
S = special
Rated voltage: 110
•
10 = 1100 V
Rated capacitance:
107 = 10 · 107 pF = 100 µF
427 = 42 · 107 pF = 420 µF
108 = 10 · 108 pF = 1 mF
Distance between terminals:
1 = 32 mm
2 = 35 mm
3 = 50 mm
4 = 45 mm
9 = special
Capacitance tolerance
J = ± 5%
K = ± 10%
A = special
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 4 of 21
Important notes at the end of this document.
1.4 Drawings types
Figure 1: - B25620B - Ø 85mm Figure 2: - B25620C / B25620D - Ø 85mm
- Female terminals (M6) - Female terminals (M6)
- Between terminals 32±0.5mm - Between terminals 32±0.5mm
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 5 of 21
Important notes at the end of this document.
Figure 3: - B25623B - Ø 90mm Figure 4: - B25620B - Ø 116mm
- Male terminals (M8) - Female terminals (M6)
- Between terminals 45±0.5mm - Between terminals 50±0.5mm
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 6 of 21
Important notes at the end of this document.
Figure 5: - B25620C
/
B25620D - Ø 116mm
- Female terminals (M6)
- Between terminals 50±0.5mm
M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types.
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 7 of 21
Important notes at the end of this document.
Terms and characteristics
The following definitions apply to power capacitors according to IEC 61071.
Rated capacitance CN
Nominal value of the capacitance at 20 °C and measuring frequency range of 50 to 120 Hz.
Rated DC voltage VRDC
Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which the capacitor
has been designed, for continuous operation.
Ripple voltage Vr
Peak-to-peak alternating component of the unidirectional voltage.
Maximum surge voltage Vs
Peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited number
of times and duration.
- Maximum duration: 50 ms / pulse
- Maximum number of occurrences: 1000 (during load)
Insulation voltage Vi
Rms rated value of the insulation voltage of capacitive elements and terminals to case or earth. When it is not
specified in the product data sheet, the insulation voltage is at least:
Vi = 2
R
V
Maximum rate of voltage rise (dV/dt)max
Maximum permissible repetitive rate of voltage rise of the operational voltage.
Maximum current Imax
Maximum rms current for continuous operation.
Maximum peak current Î
Maximum permissible repetitive current amplitude during continuous operation.
Maximum peak current (Î) and maximum rate of voltage rise (dV/dt)max on a capacitor are related as follows:
Î = C · (dV/dt)max
Maximum surge current Î s
Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a
limited number of times (1000 times) and duration (50 ms / pulse).
Îs = C · (dV/dt)s
Ambient temperature Θ
ΘΘ
ΘA
Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the capacitor.
Lowest operating temperature Θ
ΘΘ
Θmin
Lowest permitted ambient temperature at which a capacitor may be energized.
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 8 of 21
Important notes at the end of this document.
Maximum operating temperature Θ
ΘΘ
Θmax
Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the case.
Hot-spot temperature Θ
ΘΘ
Θhs / Ths
Temperature zone inside of the capacitor at hottest spot.
Tangent of the loss angle of a capacitor tan δ
δδ
δ
Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a specified
sinusoidal alternating voltage, frequency and temperature.
Series resistance Rs
The sum of all Ohmic resistances occurring inside the capacitor.
ESR
ESR (Equivalent Series Resistance) representing entire active power in capacitor.
ESR =
C
⋅
ω
δ
tan =
C
Rs⋅
+
ω
δ
0
tan
Thermal resistance Rth
The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot rises in relation
to the dissipation losses.
Maximum power loss Pmax
Maximum permissible power dissipation for the capacitor’s operation.
Pmax = th
Ahs
R
Θ
−
Θ
Self inductance Lself
The sum of all inductive elements which are contained in a capacitor.
Resonance frequency fr
The lowest frequency at which the impedance of the capacitor becomes minimum.
fr = Rself CL2 1⋅⋅π
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 9 of 21
Important notes at the end of this document.
VR = 700 V DC / VTT = 1050 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig. Ordering code
280 55 12.1
4.0 1.2 ≤ 40 5.4 85 70 76 0.45 1 B25620B0287K701
500 60 13.5
4.5 1.4 ≤ 40 3.7 90 95 124 0.73 3 B25623B0507K704
560 80 24.2
8.0 0.9 ≤ 40 4.0 116 70 76 0.88 4 B25620B0567K703
620 55 12.1
4.0 1.9 ≤ 40 3.1 85 120 126 0.71 1 B25620B0627K701
700 55 12.1
4.0 2.0 ≤ 40 2.8 85 132 138 0.87 1 B25620B0707K701
780 65 13.4
4.5 1.9 ≤ 40 2.7 90 132 161 1.00 3 B25623B0787K703
900 80 24.3
8.0 1.1 ≤ 40 2.9 116 95 101 1.13 4 B25620B0907K703
1240
80 24.3
8.1 1.3 ≤ 40 2.3 116 120 126 1.40 4 B25620B0128K743
1400
80 24.1
8.0 1.4 ≤ 40 2.1 116 132 138 1.55 4 B25620B0148K703
VR = 900 V DC / VTT = 1350V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A
Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig.
Ordering code
220 50 10.8 3.6 1.3 ≤ 40 5.4 85 70 76 0.45 1 B25620B0227K881
220 50 10.8 3.6 1.3 ≤ 40 5.4 85 74 76 0.48 2 B25620C0227K881
350 50 10.7 3.6 1.7 ≤ 40 3.9 85 95 101 0.58 1 B25620B0357K881
350 50 10.7 3.6 1.7 ≤ 40 3.9 85 99 101 0.61 2 B25620C0357K881
420 60 11.9 4.0 1.5 ≤ 40 3.7 90 95 124 0.73 3 B25623B0427K904
440 65 21.7 7.2 1.1 ≤ 40 3.8 116 70 76 0.88 4 B25620B0447K883
480 55 10.8 3.6 2.8 ≤ 40 3.1 85 120 126 0.71 1 B25620B0487K881
480 55 10.8 3.6 2.1 ≤ 40 3.1 85 124 126 0.74 2 B25620C0487K881
550 50 11 3.7 2.3 ≤ 40 2.8 85 132 138 0.87 1 B25620B0557K881
550 50 11 3.7 2.3 ≤ 40 2.8 85 136 138 0.9 2 B25620C0557K881
580 62 11.9 4.0 1.9 ≤ 40 3.0 90 120 149 0.9 3 B25623B0587K904
650 62 11.8 3.9 2.1 ≤ 40 2.7 90 132 161 1 3 B25623B0657K904
700 70 21.5 7.1 1.2 ≤ 40 2.9 116 95 101 1.13 4 B25620B0707K883
730 62 11.8 3.9 2.2 ≤ 60 2.4 90 145 174 1.2 3 B25623B0737K904
750 55 23.1 7.7 1.2 ≤ 60 2.2 85 173 179 1.1 1 B25620B0757K881
750 55 23.1 7.7 1.2 ≤ 60 2.2 85 177 179 1.13 2 B25620C0757K881
830 58 23.5 7.8 0.7 ≤ 60 2.1 90 173 202 1.3 3 B25623B0837K904
970 75 21.7 7.2 1.4 ≤ 40 2.3 116 120 126 1.4 4 B25620B0977K883
1100
75 21.7 7.2 1.6 ≤ 40 2.1 116 132 138 1.55 4 B25620B0118K883
1500
80 43 15.4 1.1 ≤ 60 1.6 116 173 179 1.945 4 B25620B0158K883
1500
80 43 15.4 1.1 ≤ 60 1.6 116 177 179 1.945 5 B25620C0158K883
1 IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 10 of 21
Important notes at the end of this document.
VR = 1100 V DC / VTT = 1650 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A
Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig. Ordering code
140 50 8.6 2.9 1.4 ≤ 40 5.4 85 70 76 0.45 1 B25620B1147K101
140 50 8.6 2.9 1.4 ≤ 40 5.4 85 74 76 0.48 2 B25620C1147K101
220 54 9.5 3.2 1.5 ≤ 40 4.3 90 83 112 0.53 3 B25623B1227K104
270 55 9.6 3.2 1.7 ≤ 40 3.7 90 95 124 0.73 3 B25623B1277K104
280 75 17.2 5.7 1.0 ≤ 40 4 116 70 76 0.9 4 B25620B1287K103
310 50 8.6 2.9 2.3 ≤ 40 3.1 85 120 126 0.71 1 B25620B1317K101
310 50 8.6 2.9 2.3 ≤ 40 3.1 85 124 126 0.73 2 B25620C1317K101
370 56 9.5 3.2 2.2 ≤ 40 3.0 90 120 149 0.9 3 B25623B1377K104
400 75 17.3 5.8 1.5 ≤ 40 2.2 85 152 154 1 2 B25620D1407K101
420 63 8.8 2.9 2.4 ≤ 40 2.8 85 135 141 0.87 1 B25620B1427A101*
420 63 8.8 2.9 2.4 ≤ 40 2.8 85 139 141 0.9 2 B25620C1427A101*
420 75 17.3 5.8 1.5 ≤ 40 2.2 85 155 161 1 1 B25620B1427K101
420 75 17.3 5.8 1.5 ≤ 40 2.2 85 159 161 1 2 B25620C1427K101
420 75 17.3 5.8 1.5 ≤ 40 2.2 85 152 154 1 2 B25620D1427K101
420 56 9.5 3.2 2.4 ≤ 40 2.7 90 132 161 1 3 B25623B1427K104
450 75 16.5 5.4 1.3 ≤ 40 2.9 116 95 101 1.13 4 B25620B1457K103
450 80 17.3 5.8 1.0 ≤ 60 2.2 85 177 179 1.05 2 B25620D1457K101
470 56 9.5 3.2 2.6 ≤ 40 2.4 90 145 174 1.2 3 B25623B1477K104
480 80 17.3 5.8 1.0 ≤ 60 2.2 85 173 179 1.05 1 B25620B1487K101
480 80 17.3 5.8 1.0 ≤ 60 2.2 85 177 179 1.08 2 B25620C1487K101
530 53 18.8 6.3 0.8 ≤ 60 2.1 90 173 202 1.3 3 B25623B1537K104
610 80 16.8 5.6 3.13 ≤ 40 2.3 116 120 126 1.4 4 B25620B1617K103
610 80 17 5.7 1.1 ≤ 60 1.7 85 227 229 2.2 2 B25620D1617K101
700 80 16.8 5.6 1.7 ≤ 40 2.1 116 132 138 1.55 4 B25620B1707K103
700 80 27 8.9 1.1 ≤ 60 1.7 116 177 179 2.05 5 B25620D1707K103
940 80 32.7 11 0.7 ≤ 60 1.6 116 173 179 2.06 4 B25620B1947K103
1100 80 30.8 10.3 0.8 ≤ 100 1.3 116 223 229 2.56 4 B25620B1118K103
1500 80 32.5 10.8 0.9 ≤ 90 1 116 273 279 2.8 4 B25620B1158K103
* Capacitance tolerance A: -15% ... 0%
1 IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 11 of 21
Important notes at the end of this document.
VR = 1200 V DC / VTT = 1800 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A
Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig. Ordering code
220 50 8.6 2.9 1.9 ≤ 40 3.7 90 95 124 0.73 3 B25623B1227K204
300 50 8.5 2.8 2.4 ≤ 40 3.0 90 120 149 0.9 3 B25623B1307K204
340 50 8.5 2.8 2.6 ≤ 40 2.7 90 132 161 1 3 B25623B1347K204
360 70 15.2 5.07 1.34 ≤ 40 2.9 116 95 101 1.13 4 B25620B1367K203
440 52 17.1 5.7 0.8 ≤ 60 2.1 90 173 202 1.3 3 B25623B1447K204
500 75 15.3 5.12 1.61 ≤ 40 2.29 116 120 126 1.4 4 B25620B1507K203
550 80 16.9 5.63 0.98 ≤ 90 1.59 90 223 252 1.4 3 B25623B1557K204
570 75 15.4 5.14 1.75 ≤ 40 2.07 116 133 139 1.55 4 B25620B1577K203
730 80 30.8 10.2 0.69 ≤ 60 1.59 116 173 179 2.05 4 B25620B1737K203
1000 80 30.7 10.2 0.80 ≤ 90 1.23 116 223 229 2.56 4 B25620B1108K203
VR = 1320 V DC / VTT = 1980 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A
Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig. Ordering code
160 48 6.8 2.3 2.0 ≤ 40 4.1 85 95 101 0.58 1 B25620B1167K321
190 51 8.1 2.7 1.9 ≤ 40 3.7 90 95 124 0.73 3 B25623B1197K304
220 45 7.4 2.5 2.6 ≤ 40 3.1 85 120 126 0.71 1 B25620B1227K321
220 45 7.4 2.5 2.6 ≤ 40 3.1 85 124 126 0.73 2 B25620C1227K321
250 51 7.7 2.6 2.5 ≤ 40 3.0 90 120 149 0.9 3 B25623B1257K304
260 45 7.6 2.6 2.7 ≤ 40 2.8 85 132 138 0.87 1 B25620B1267K321
260 45 7.6 2.6 2.7 ≤ 40 2.8 85 136 138 0.9 2 B25620C1267K321
290 52 7.9 2.6 2.7 ≤ 40 2.7 90 132 161 1 3 B25623B1297K304
310 65 14.3 4.8 1.4 ≤ 40 2.9 116 95 101 1.13 4 B25620B1317K323
330 52 7.9 2.6 3.0 ≤ 60 2.4 90 145 174 1.2 3 B25623B1337K304
340 70 14.8 5 0.9 ≤ 60 1.6 85 173 179 1.05 1 B25620B1347K321
340 70 14.8 5 0.9 ≤ 60 1.6 85 177 179 1.08 2 B25620C1347K321
370 50 15.7 5.2 0.8 ≤ 60 2.1 90 173 202 1.3 3 B25623B0377K304
420 65 14.1 4.7 1.7 ≤ 40 2.3 116 120 126 1.4 4 B25620B1427K323
480 70 14.1 4.7 1.8 ≤ 40 2.1 116 132 138 1.55 4 B25620B1487K323
660 70 27.8 9.3 0.8 ≤ 90 1.6 116 173 179 2.05 4 B25620B1667K323
1000 80 26.4 8.8 1 ≤ 90 1 116 273 279 2.8 4 B25620B1108K323
1 IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 12 of 21
Important notes at the end of this document.
VR = 1980 V DC / VTT = 2970 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF IMAX
1
A
Is
kA Î
kA RS
mΩ Lself
nH RTH
K/W D
mm HC
mm HT
mm Weight
kg Fig. Ordering Code
40 35 4.5 1.5 2.1 ≤ 60 5.4 85 70 76 0.45 1 B25620B1406K981
40 35 4.5 1.5 2.1 ≤ 60 5.4 85 74 76 0.48 2 B25620C1406K981
70 40 4.9 1.6 2.8 ≤ 60 4 85 95 101 0.58 1 B25620B1706K981
70 40 4.9 1.6 2.8 ≤ 60 4 85 99 101 0.61 2 B25620C1706K981
145 50 10 3.4 1.1 ≤ 60 2.2 85 173 179 1.05 1 B25620B1147K981
145 50 10 3.4 1.1 ≤ 60 2.2 85 177 179 1.08 2 B25620C1147K981
190 60 18.9 6.3 0.7 ≤ 60 2.3 116 120 126 1.4 4 B25620B1197K983
215 60 9.6 3.2 2.4 ≤ 40 2.1 116 132 138 1.55 4 B25620B1217K983
295 70 18.8 6.3 0.8 ≤ 60 1.6 116 173 179 2.05 4 B25620B1297K983
460 80 18.2 6 1.1 ≤ 90 1 116 263 269 2.6 4 B25620B1467K983
510 80 19.3 6.4 1.1 ≤ 90 1.4 116 273 279 2.8 4 B25620B1517K983
1 IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
Display of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data sheets,
data books, other publications, on the EPCOS website, or in order-related documents such as shipping
notes, order confirmations and product labels. The varying representations of the ordering codes
are due to different processes employed and do not affect the specifications of the respective
products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 13 of 21
Important notes at the end of this document.
2. Expected lifetime
Expected lifetime tld at different hotspot temperature (Θhs) and voltage V
For short term operation (maximum 10% of the total expected lifetime) and capacitors with diameter 85 and
90 mm a maximum hot spot temperature of 85°C is allowed without further reduction of the lifetime.
3. Current derating
3.1 Current derating graphs for capacitors 700 V DC
B25620B0287K701 B25620B0627K701
B25620B0707K701 B25620B0567K703
Expected Lifetime @ tLD
0,9
0,95
1
1,05
1,1
0,5 0,7 0,9 1,1 1,3 1,5
tLD /tLD (co)
70°C 75°C
80°C
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
60
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
40 45 50 55 60 65 70
Temp. (°C)
V/Vn
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
60
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
40
50
60
70
80
40 45 50 55 60 65 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 14 of 21
Important notes at the end of this document.
B25620B0907K703 B25620B0128K743
B25620B0148K703 B25620B0507K704
B25620B0787K704
3.2 Current derating graphs for capacitors 1100 V DC
B25620B1147K101 B25620B1287K103
Current Derating @ Ths = 75 °C
25
35
45
55
65
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
40
50
60
70
80
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
35
40
45
50
55
60
65
70
75
80
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
25
30
35
40
45
50
55
60
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 15 of 21
Important notes at the end of this document.
B25620B1317K101 B25620B1407K101/B25620B1427A101
B25620B1427K101/B25620D1427K101 B25620D1457K101
B25620B1457K103 B25620B1487K101
B25620B1617K103 B25620D1617K101
Current Derating @ Ths = 75 °C
30
40
50
60
70
80
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
75
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
= 75°C
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
40 50 60 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 16 of 21
Important notes at the end of this document.
B25620B1707K103 B25620D1707K103
B25620B1947K103 B25620B1118K103
B25620B1158K103 B25620B1227K104
B25620B1277K104 B25620B1377K104
Current Derating @ Ths = 75 °C
35
40
45
50
55
40 45 50 55 60
Temp. (°C )
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
40
50
60
70
80
40 45 50 55 60 65 70
Temp. (°C)
Current Derating @ Ths = 75 °C
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 17 of 21
Important notes at the end of this document.
B25620B1427K104 B25620B1477K104
B25620B1537K104
3.3 Current derating graphs for capacitors 1200 V DC
B25620B1227K204 B25620B1307K204
B25620B1347K204 B25620B1447K204
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
40
50
60
70
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
20
25
30
35
40
45
50
55
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 18 of 21
Important notes at the end of this document.
B25620B1557K204 B25620B1367K203
B25620B1507K203 B25620B1577K203
B25620B1737K203 B25620B1108K203
Current derating graphs for capacitors rated 900 / 1320 / 1980 V DC are available upon request.
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
75
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
30
35
40
45
50
55
60
65
70
75
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Current Derating @ Ths = 75 °C
35
40
45
50
55
60
65
70
75
80
40 43 46 49 52 55 58 61 64 67 70
Temp. (°C)
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 19 of 21
Important notes at the end of this document.
4. FIT
FIT Rate
1
10
100
1000
10000
0,8 0,9 1 1,1 1,2
Voltage x Un
FIT
60º C 65º C 70º C 75º C 80º C
V/Vn
Θ
ΘΘ
Θ
hs
Film Capacitors – Power Electronic Capacitors B2562*
MKP DC B2562
FILM R&D / CAP PM FILM P May 2015 – Version 10
Please read Cautions and warnings and Page 20 of 21
Important notes at the end of this document.
Cautions and warnings
In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at
all.
Check tightness of the connections/terminals periodically.
The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit
the capacitor before handling.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper
installation and application of capacitors for power electronics.
Safety
Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage
may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical
disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy
contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized.
Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at
extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali,
salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals is
required to avoid conductive path between phases and/or phases and ground.
The maximum storage temperature is 85 °C.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors,
too. The maximum service life expectancy may vary depending on the application the capacitor is used in.
Important notes
Page 21 of 21
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
