First Edition LCD Module Technical Specification Apr, 01, 2010 Final Revision Oct. 08, 2010 tye. 1-95563D104J-LW-A-AAN Customer Customer's Product No OPTREX CORPORATION Yasuo Kawasaki Approved : QUALITY ASSURANCE DIVISION Checked : Toshiaki Ochi Product Realization Div, Noboru Wada Prepared : Product Realization Div, By Signature : Date : Please return this specification within two month with your signature. If not returned within two month ,specification will be considered as having been accepted. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 1/36 OPTREX ConfidentialCONTENTS Item Page CONTENTS APPLICATION OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION CO} ot] OF] Se | w INTERFACE TIMING BLOCK DIAGRAM MECHANICAL SPECIFICATION O;}ao sys] oo] oy eR] wl] pw OPTICAL CHARACTERISTICS Oo RELIABILITY TEST CONDITION _ _ INSPECTION STANDARDS bo OTHER FEATURE ww HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION PRODUCTS NUMBER LABELING FORMS LED UNIT for 10.4SVGA Revision History Rev. Date Comment 1 Oct. 08, 2010 | Revise: TECHNICAL SPECIFICATION Revise: LED UNIT for 10.4SVGA T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 2/36 OPTREX Confidential1. APPLICATION This specification applies to color TFT-LCD module, T-55563D104J-LW-A-AAN. These specification papers are the proprietary product of OPTREX CORPORATION (OPTREX) and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation. (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, they should first contact OPTREX sales representative for it's intended use in writing. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult OPTREX sales representative for any questions regarding this product. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 3/36 OPTREX Confidential2. OVERVIEW T-55563D104J-LW-A-AAN is 10.4 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit or 8 bit digital data, 800 x 600, 262k-color or 16.7M-color images are displayed on the 10.4 diagonal screen. Input power voltage is 3.3 V for LCD driving. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 40 MHz clock cycle. Driver circuit for LED backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Display Area (nm) 211.2 (H) x 158.4 (V) (10.4-inch diagonal) Number of Dots 800 x 3 (H) x 600 CV) Pixel Pitch (um) 0.264 (H) x 0.264 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally white Number of Color 262k(6 bit/color), 16.7M(8 bit/color) Luminance (cd/m2) 700 Viewing Angle (CR = 10) ~80~80(H), -60~80(V) Surface Treatment Anti-glare and hard-coating 3H Electrical Interface LVDS Viewing Direction Higher Contrast ratio: 6 o'clock Less gray scale reversal: 12 o'clock Module Size (mm) 230.0 (W) x 180.2 (H) x 10.5 (D) Module Mass (g) 520 Backlight Unit LED, edge-light, replaceable Characteristic value without any note is typical value. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 4/36 OPTREX Confidential3. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX UNIT Power Supply Voltage for LCD VCC 0 4.0 Vv Logic Input Voltage VI -0.3 VCC+0.8 V Backlight (LED) Current IF 0 180 mA Operation Temperature (Panel) Note 1,2) Top(Panel) -30 80 C Operation Temperature (Ambient) Note 2) Top (Ambient) 30 80 C Storage Temperature Note 2) Tste 30 80 C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C : 90%RH max. without condensation Top, Tstg > 40C : Absolute humidity shall be less than the value of 90%RH at 40C without condensation. 4. ELECTRICAL CHARACTERISTICS 1) TFT-LCD Ambient temperature: Ta = 25C ITEM SYMBOL | MIN. TYP. MAX. | UNIT Remarks Power Supply Voltage for LCD VCC 3.0 3.3 3.6 Vv *1) Power Supply Current for LCD ICC 315 500 mA *2) Permissive Input Ripple Voltage VRP 100 mVp-p}| VCC =+3.3 V High VIH 0.8x VCC VCC V MODE, SC Logic Input Voltage Low VIL 0 0.2x VEC V MODE, SC *1) Power and signals sequence: tl <10ms 200ms < t4 0<t2<50ms 200ms < t5 0 <t3 < 50ms O0<t6 Vcc LCD Power Supply data ; Logic Signal ! Backlight Power Supply | | aoa t5 6 data: RGB DATA, DCLK, DENA, MODE, $C T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 5/36 OPTREX ConfidentialVCC-dip conditions: 1) When 2.6 V < VCC <3.0 V, td < 10 ms 2) When VCC <2.6V VCC-dip conditions should also follow the power and signals sequence. VCC *2) VCC = +3.3 V, fu = 37.9 kHz, fv= 60 Hz, fork = 40 MHz Display image at typical power supply current value is 256-gray-bar pattern (8 bit), 600 line mode. *3) Fuse Parameter Fuse Type Name Supplier Remark VCC FCC16102AB Kamaya Electric Co., Ltd. *) *) The power supply capacity should be designed to be more than the fusing current. (2) Backlight ITEM SYMBOL] MIN. TYP. MAX. | UNIT Remarks (27) IF = 70 mA, Ta = 25C, *2) LED Voltage VF V IF = 70 mA, Ta = 0C 36.0 Vv IF = 70 mA, Ta = 30C LED Current IF 7 70 80 mA Ta = 25C, *1), *3) . . IF = 70 mA, Ta = 25C LED Life Time LT 80,000 | 100,000 h #4), *5), Continuous operation [Note] *1) Constant Current Drive *2) The Voltage deviation between strings: | Vii Vie| < 2V *3) LED Current measurement method T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 6/36 OPTREX ConfidentialPower Al Supply LCD Module A C2 a Power AQ Supply *4) LED life time is defined as the time when the brightness becomes 50% of the initial value. *5) The life time of the backlight depends on the ambient temperature. The life time will decrease under high temperature. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 7/36 OPTREX Confidential5. INTERFACE PIN CONNECTION (1) CN 1 (Interface Signal) Used connector: FI-SE20P-HFE (JAE) Corresponding connector: FI-S20S|for discrete wire] (JAE) Pin Symbol Function (ISP 6 bit compatibility mode) Function (ISP 8 bit No. 6 bit input 8 bit input compatibility mode) 1 VCC +3.3 V Power supply < 2 VCC +3.3 V Power supply < 3 GND GND < 4 GND GND < 5 | Link 0O- | RO, R1, R2, R383, R4, R5, GO | R2, R3, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 6 | Link 0+| RO, R1, R2, R3, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 7 GND GND < 8 | Link 1-| G1, G2, G38, G4, G5, BO, B1_ | G38, G4, G5, G6, G7, B2, B3 | G1, G2, G8, G4, G5, BO, B1 9 |Link 1+| G1, G2, G8, G4, G5, BO, B1_| G8, G4, G5, G6, G7, B2, B3 | G1, G2, G8, G4, G5, BO, B1 10 GND GND < 11 | Link 2-| B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 12 | Link 2+| B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 13 GND GND < 14 |CLKIN- Clock < 15 |CLKIN+ Clock + < 16 GND GND < 17_| Link3- | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 18 | Link3+ | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 19 | MODE Low=ISP 6 bit compatibility mode Blatconpa tibility mode 20 SC Scan direction control. (Low : Normal , High : Reverse ) | < *1) Metal frame is connected to signal GND. *2) Recommended wiring of Pin 17,18 (6 bit input) LVDS transmitter LOW data Pin 17 Pin 18 (2) CN 2(Backlight) Backlight-side connector: SMO6B-SHLS-TF(LF)(SN) (JST) Corresponding connector: SHLP-06V-S-B (JST) > VCC 680 Q Pin 17 or Pin 18 620 Q Pin No. Symbol Function 1 NC This pin should be open. 2 NC This pin should be open. 3 LED C1 LED cathode 1 4 LED AI LED anode 1 5 LED A 2 LED anode 2 6 LED C 2 LED cathode 2 T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 8/36 OPTREX Confidentiala. ISP 6 bit compatibility mode bit input) (3) ISP data mapping K CLKIN+/- QQ TEX Link0+/- DOMMAMARAAEY Link1+/- ORM ANMAM AE Link2+/- b. ISP 6 bit compatibility mode(8 bit input) CLKIN+/- Yu Yu Yu Yu Yu yu \ X X Xx Xx B3 Xx B2 Xx G7 Xx G6 Xx G5 Xx G4 Xx G3 Xx X X Xx Xx DENA Xx Xx Xx B7 Xx B6 Xx B5 Xx B4 Xx X X Xx Xx Xx Bl Xx BO Xx Gl Xx GO Xx Rl Xx RO Xx X Link1+/- Link2+/- Link3+/- c. ISP 8 bit compatibility mode aXe Xe Xe Ke Xe Xe XY XY PVD IVE NDE VEY CLKIN+/ Link0+/ Link1+/- XYTEX AINE NEY XI IYAIACEIYEDNDEIEN- Link2+/- Page 9/36 OPTREX CORPORATION Link3+/- T-55563D104J-LW-A-AAN Rev.1 OPTREX Confidential6. INTERFACE TIMING LVDS transmitter input signal (1) Timing Specifications ITEM SYMBOL MIN. TYP. MAX. UNIT Frequency foi 35 40 42 MHz DCLK Period tcLK 23.8 25 28.6 ns Active Time tHa 800 800 800 tcLK ; Blanking Time tHB 20 256 7 tcLkK Horizontal Frequency fu 35.2 37.9 39.2 kHz Period tH 25.5 26.4 28.4 Ls DENA Active Time tva 600 600 600 tH ; Blanking Time tvB 3 28 7 tH Vertical Frequency fy 55 60 64.2 Hz Period ty 15.6 16.7 18.2 ms [Note] 1) DENA (Data Enable) should always be positive polarity as shown in the timing specification. 2) DCLK should appear during all invalid period. 3) LVDS timing follows the timing specifications of LVDS receiver IC: THC63LVDF84B(Thine). 4) In case of blanking time fluctuation, please use following. tvBn > tvBn-1 3(tH) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 10/36 OPTREX Confidential(2) Timing Chart a. Horizontal Timing Chart First Data |_- Last Data DATA Invalid Data X vy 2 \ 3 Invalid Data (R,G,B) typ tHa Vv \ __ DENA AW tu=1/fu Vv. A b. Vertical Timing Chart LINE DATA Invalid Data tve tva A Vv oe TL ANA L___ nn tv=1/fyv A T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 11/36 OPTREX Confidential(3) Color Data Assignment __a.6 bit input INPUT DATA R DATA G DATA B DATA COLOR R5 R4 RBER2Z:R1 RO| GS G4! G3! G2! G1! G0] BS | B4: B83: BZ: Bi: BO MSB LSB _|MSB LSB _|MSB LSB BLACK 0:0:0:0:0:0/0:0:0:0:0:0]0:0:0:0:0:0 RED@3) 1:1: 4:1:1:1/0:0:0:0:0:0][0:0:0:0: 0: 0 GREENG63)}0:0:0:0,0:,0]1:51:51:51:51:1/0:0:':0:0:0:0 BASIC. |BLUE@3) 0:0:0:0:0:0}/0:0:0:0:0:0]}/1:1:1:1:1:1 COLOR |CYAN 0:0:0:0:;0:0;1: 1: 1:12:12 2), 1:12:12 1:71 MAGENTA} 1:1: 1:1:1:1)/0:0:0:0:0:0]/1:1:1:1:1:21 YELLOW Tid itil: lit} iit: 1: tet: t{~oi:0:0:0:0: 0 WHITE Te dlipli li tilt] ip lit: ti lilt] titi titi lil REDQ) 0:0:0:0:0:1/0:0:0:0:0:0]0:0:0:0:0: 0 RED@Q) 0:0:0:0:1:0/0:0:0:0:0:0]0:0:0:0:0: 0 RED RED@2) 1:1: 4:1:1:0/0:0:0:0:0:0][0:0:0:0: 0: 0 RED@3) Titi ti: 21:1:1/0:0:0:0:0:0]0:0:0:0:0:0 GREENG@) |0:0:0:0,0:,0/0:0:0:0:0:1]/0:0:0:0:0:0 GREEN2) |0:0:0:0,0:,0]/0:0:0:0:1:0]/0:0:0:0:0:0 GREEN GREENG62)}0:0:0:0,0,0]1:51:51:51:51:0/0:0:':0:0:0:0 GREENG63)}0:0:0:0:50:50]/1:51:51:51:51:51/0:5:0:50:0:0:0 BLUEQ) 0:0:0:0:0:0}/0:0:0:0:0:0]/0:0:0:0:0: 1 BLUE@) 0:0:0:0:0:0/0:0:0:0:0:0]0:0:0:0:1:0 BLUE BLUE2) 0 1i:1:;1,-1:1.0 BLUE63) 0 Letililitil [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 12/36 OPTREX ConfidentialINPUT DATA R DATA G DATA B DATA R7 :REIRSER4:IR3BiR2ZiR1? RO | G7 }G6!G5:G4!G3!G2iGl! GO | B7 :B6!B5:!B4:B3!B2:B1 = a ow LSB|MSB LSB|MSB BLACK Oo Oo Oo Oo RED(255) GREEN(255) BLUE(255) CYAN MAGENTA YELLOW WHITE RED(1) RED(2) DiPGdrRiPiPiDdidicdireia DiPM@rRiPiPididicdgirio DiPGMfrRiPiPidididirFia DiPGMfrRiPiPidididirFia DiPGdrRiPiPiDdidicdireia DiPGdrRiPiPiDdidicdireia ReiOPTRiBPiPicmdicgidir-ria Dime te iPiPidiadiaGdie DiPGMTRiPi@GMikBiranirica CDiPVMTRiPiPVirPicdirFPidico CDiPGMTRiPiPMiPidirFPidico SCi@MTRiPiPMiPicdirFPiadico SCi@TRiPitMiPiPdirFiadico CDi@G@TRirPicdiPicdirPiadico SCiSDTRirPiDdirPicirKriadic DiPGMTRiPi@GMikBiranirica STiPMJreidirPifPtiFb:iad:ia SiPMJreidiryPiPirPiadiadio STiPMJridiPiPirFPiaqiaqio STiPMJridiPiPirFPiaqiaqio STiPMJrReiDdirPiPiFPiaqiaqio STiPMJrReiDdirPiPiFPiaqiaqio SiPMJrRicdirPirPirPiadiadio CDi@DM]RPi@dirPiPiRPicdicdia RED(@255) GREEN() GREEN(2) GREEN(255) BLUE() BLUE() BLUE(255) [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 13/36 OPTREX Confidential(4) Display Position and Scan Direction D(X, Y) shows the data number of input signal. SC: Low SC: High CN2 CN2 DG.) = > D(00,1) 1(800,600) << (1,600) he DU,600) 5 D(800,600) D001) <2 pi.) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 14/36 OPTREX Confidential7. BLOCK DIAGRAM CN1 Timing signal Display data Timing => > Controller Power = I/F Connector Power Supply Circuit TFT-LCD Gi |/}______ i > ry G2 - > e oO 2 OQ G600 |/}_____ > 0 t af 5TH $2399 | Drivers(source) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 15/36 OPTREX Confidential8. MECHANICAL SPECIFICATIONS (1) Front Side 5 ao . oO a Cc mM Y ag co <n T Zz o Se or ae 5 2 ~t co Lt E ce LO O 20 : i _ Wo) ES 9 Er eG oO (v 22) 6 le (490) lO Oo +1 0 Qo Ww (ONINSdO TSzZ58) 87191 (s'8) 2 | Ww CVadV SATLLOVO Vo SSsl oc Cc oO | Fy | Fh co ia rr . es [ I i oc | -e cc Ke oN _ Zz LO A WW QO Ola S| a = VY Lu fu _ 3 =| & = . o = | Oy; W NJ | > af oo oO iu} - - t a N} O A wi) < om) 2 Yoo 8 wy e e ae A 0 c | ys Po : = a Leal x va eo SS eal, (806) 768 oy Ea of 0 /= 2 OSl Jy st st Suc 1'Qo TO (0) 4 < lO St . Zz O oO N - N O i nf te) (Unit:mm) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 16/36 OPTREX Confidential(2) Rear Side Od co -VadVv 158V1 6 BEL aa) vOQS SE a) CLSP)D CNS) CS T)IAL-STHS-ESONS? 22ND CAV) AsSH-dOdas- [ai lNo (69r) Od Vaev 1s9Vv1 901 SILL (18) - ENO (9s) (Unit:mm) Page 17/36 OPTREX CORPORATION T-55563D104J-LW-A-AAN Rev.1 OPTREX Confidential9. OPTICAL CHARACTERISTICS Ta=25C, VCC=3.8V, Input Signals: Typ. values shown in Section 6 ITEM SYMBOL |CONDITION| MIN TYP MAX UNIT |Remarks Contrast Ratio CR 8v=0, 6n=0 450 700 *1)*2)*5) Luminance Lw Ov=0, OH=0 560 700 ed/m2 | *3)*5) Luminance Uniformity ALw Ov=0, OH=0 30 % |*1)*3)*5) tr Ov=0, OH=0 7 4 ms |*1)*4)*5) Response Time tf Ov=0, O1=0 -- 12 ms |*1)*4)*5) Viewing Horizontal Ou CR> 19 65285 _| -80~80 - *1)*5) Angle Vertical Ov -45~65 | G0~80 -- *1)*5) Image sticking tis 2h -- -- 2 s *6) Red Rx 0.528 0.568 0.608 Ry 0.3806 0.346 0.386 Green Gx 0.3816 0.356 0.3896 Color Gy 0.517 0.557 0.597 Coordinates [Blue Bx | 29 otig | 0159 | 0.199 *D*5) By 0.096 0.136 0.176 White Wx 0.273 0.318 0.353 Wy 0.289 0.329 0.869 [Note] These items are measured using EZContrast (ELDIM) for viewing angle and CS2000 (Minolta) or equivalent equipment for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the backlight unless noted. Condition: IF = 70 mA Measurement method for luminance and color coordinates is as follows. 0=1 (Field) TFT-LCD module The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 18/36 OPTREX Confidential*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below 200 400 600 (1, 1) 1 2 7 150 D OD 5 300 a a3 a4 450 YY YY (800, 600) *2) Definition of Contrast Ratio CR= Luminance with all white pixels / Luminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *4) Definition of Response Time White Luminance 10% Black 10% wok Ji----- Right (+) LCD panel Lower(-) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 19/36 OPTREX Confidential*6) Image sticking: Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. TEST PATTERN FOR IMAGE STICKING TEST T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 20/36 OPTREX Confidential10. RELIABILITY TEST CONDITION (1) Temperature and Humidity TEST ITEM CONDITIONS HIGH TEMPERATURE 40C, 90% RH, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 80C, 240 h LOW TEMPERATURE OPERATION 30C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE 30C, 240 h THERMAL SHOCK 30C (1h) ~ 80CGh), 100 cycles (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470m/s? (150G) SHOCK Waveform: half sinusoidal wave, 2ms (NON-OPERATION)| Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500Hz (NON-OPERATION)]| Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) ESD Test ITEM CONDITIONS CONTACT DISCHARGE . . (OPERATION) 150pF, 3300, +8kV, 10 times at 1 sec interval SIGNAL PIN DISCHARGE . . (NON-OPERATION) 200pF, 0Q, +200V, 10 times at 1 sec interval (4) Judgment standard The judgment of the above tests should be made as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 21/36 OPTREX Confidential12. OTHER FEATURE This LCD module complies with RoHS directive. * RoHS: Restriction of the use of certain hazardous substances in electrical and electronic equipment UL1950 certified (UL File# 158720) T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 23/36 OPTREX Confidential13. HANDLING PRECAUTIONS FOR TFT-LCD MODULE Please pay attention to the followings in handling TFT-LCD products: (1) ASSEMBLY PRECAUTION a. Please mount the LCD module by using mounting hole with a screw clamping torque less than 0.5 Nm. Please do not bend or wrench the LCD module in assembling. Please do not drop, bend or twist the LCD module in handling. b. Please design display housing in accordance with the following guide lines. (a) Housing case must be designed carefully so as not to put stresses on LCD and not to wrench module. (b) Under high temperature environment, performance and life time of LED may heavily shorten. When you design with our LCD product, please consider radiating heat and ventilation for good heat management. (c) Keep sufficient clearance between LCD module back surface and housing when the LCD module is mounted. Approximately 1.0mm of the clearance in the design is recommended taking into account the tolerance of LCD module thickness and mounting structure height on the housing. (d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to be reconsidered when the additional parts are implemented for EMI countermeasure. (e) Design the LED driver location and connector position carefully so as not to give stress to LED backlight cable. (f) Keep sufficient clearance between LCD module and the others parts, such as inverter and speaker so as not to interfere the LCD module. Approximately 1.0 mm of the clearance in the design is recommended. (g) To avoid local elevation/decrease of temperature, considering location of heating element, heat release, thermal design should be done. c. Please do not push or scratch LCD panel surface with anything hard. And do not soil LCD panel surface by touching with bare hands. (Polarizer film, surface of LCD panel is easy to be flawed.) d. Please wipe off LCD panel surface with absorbent cotton or soft cloth in case of it being soiled. e. Please wipe off drops of adhesives like saliva and water on LCD panel surface immediately. They might damage to cause panel surface variation and color change. f. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing modules may cause them not to work well. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 24/36 OPTREX Confidentialg. Please do not touch metal frames with bare hands and soiled gloves. A color change of the metal frames can happen during a long preservation of soiled LCD modules. h. Please handle metal frame carefully because edge of metal frame is very sharp. i. Please connect the metal frame of LCD module to GND in order to minimize the effect of external noise and EMI. j. Be sure to connect the cables and the connecters correctly. (2) OPERATING PRECAUTIONS a. Please be sure to turn off the power supply before connecting and disconnecting signal input cable. b. Please do not change variable resistance settings in LCD module. They are adjusted to the most suitable value. If they are changed, it might happen LCD does not satisfy the characteristics specification. c. The interface signal speed is very high. Please pay attention to transmission line design and other high speed signal precautions to satisfy signal specification. d. Condensation might happen on the surface and inside of LCD module in case of sudden change of ambient temperature. Please take care so as not to cause any damage mentioned on (1)-d. e. Please pay attention not to display the same pattern for very long time. Image sticking might happen on LCD. Although image sticking may disappear as the operation time proceeds, screen saver function is recommended not to cause image sticking. f. Please obey the same safe instructions as ones being prepared for ordinary electronic products. (3) PRECAUTIONS WITH ELECTROSTATICS a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be affected by electrostatics. Please be careful with electrostatics by the way of your body connecting to the ground and so on. b. Please remove protection film very slowly from the surface of LCD module to prevent from electrostatics occurrence. (4) STORAGE PRECAUTIONS LCD should be stored in the room temperature environment with normal humidity. The LCD inventory should be processed by first-in first-out method. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 25/36 OPTREX Confidential(5) SAFETY PRECAUTIONS a. When you waste damaged or unnecessary LCDs, it is reeommended to crush LCDs into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off thoroughly with soap and water. c. Be sure to turn off the power supply when inserting or disconnecting the LED backlight cable. d. LED driver should be designed carefully to limit or stop its function when over current is detected on the LED. (6) OTHERS a. A strong incident light into LCD panel may cause deterioration to polarizer film, color filter, and other materials, which will degrade the quality of display characteristics. Please do not expose LCD module under strong Ultraviolet rays for a long time. b. Please pay attention to a panel side of LCD module not to contact with other materials in preserving it alone. c. For the packaging box handling, please see and obey with the packaging specification datasheet. d. Please do not reuse the LED unit which is once removed. T-55563D104J-LW-A-AAN Rev.1 OPTREX CORPORATION Page 26/36 OPTREX Confidential