UNIVERSAL PHASE ANGLE FC11AL TRIGGER MODULE X10222 INTRODUCTION This single phase or phase to phase firing module uses variable phase-angle control with adjustabe signal matching and selectable soft-start. The power transformer is remote for increased reliability and wide operational voltage capacity. The unique *MONO-LINK firing system is ideal for use with inductive loads and requires minimal wiring to the power devices. The module is fully enclosed for safety and eligibility in industrial environments. APPLICATIONS Applicable to most AC resistive or inductive loads via a triac or thyristor, on single phase to neutral or phase to phase supplies, within voltage limits. Also suitable for half-wave vibrator control. FEATURES * Fires triacs or thyristors up to 440V (50/60 Hz) supplies. * MONO-LINK - Gate to Gate firing. * High Isolation opto-coupled output. * Status LED giving output level indication. * Soft Start Function. INSTALLATION DIMENSIONS AND CONNECTIONS GATE CONNECTIONS 6.3 x 0.83mm VERTICAL AMP TAGS *MONO-LINK is trade mark of UNITED AUTOMATION LTD. Patent No 2197997 POWER CONNECTIONS SPECIFICATIONS Signal Span Minimum Signal Span Maximum Signal zero offset dV/dt rating Max. Gate/Line voltage Trigger isolation voltage Trigger output rating Storage temperature range 0 to 2V dc 0 to 25V dc 0 to 30% of span 100V/s 440V ac 4000Vrms 0.8A -20 to +85C AC input supply Auxiliary output Line Frequency Operating temperature range Soft start capacitor Mono-link fuse Manual potentiometer Power connections 18 to 24V ac @ 65mA 5V dc @ 5mA protected 50/60 Hz 0 to +65C 0.06s/F F100mA (HRC) 2K, 5K or 10K 6.3mm Amp tags FUSING: It is recommended to use semiconductor (fast acting) type fuses or circuit breakers (semiconductorMCB) for unit protection. See SRA Data sheet for further information. CE MARKING This product family carries a "CE marking". These phase angle type controllers require a suitable remote filter. For information see recommendation section and contact our sales desk. (See Declaration of Conformity). RECOMMENDATION Other documents available on request, which may be appropriate for your applications. CODE IDENTITY DESCRIPTION X10229 RFI Filtering recommendation - addressing the EMC Directive X10213 ITA Interaction, uses for phase angle and for burst fire control. X10255 SRA Safety requirements - addressing the Low Voltage Directive (LVD) including :- Thermal data/cooling ; "Live" parts warning & Earthing requirements; Fusing recommendations. AP02/4 COS UAL Conditions of sale NOTE It is recommended that installation and maintenance of this equipment should be done with reference to the current edition of the I.E.E. wiring regulations (BS7671) by suitably qualified/trained personnel. The regulations contain important requirements regarding safety of electrical equipment. (For International standards refer to I.E.C directive IEC 950). ORDER CODE: State part number: FC11AL + Signal option. Optional extras include: Potentiometer, Soft start capacitor, Supply transformer. UNITED AUTOMATION LIMITED 1 Southport Business Park Southport, PR8 4HQ, U.K. Page No 2 of 2 Issue 3 Tel (01704)-565713 Fax (01704)-569760 17/10/97