NOTES:
1. MIN. PUSHOUT FORCE: .5 lb.
2. COPLANARITY: .004 [.10] = POS 02 THRU 26
.006 [.15] = POS 27 THRU 50
3. REPRESENTS CRITICAL DIMENSION.
4. USE SFMC-50-D BODY.
5. NOTE DELETED.
6. PACKAGE ONLY POSITIONS -04 THRU -50 IN TUBES;
LAYER PACKAGE POSITIONS -02 THRU -03.
7. CUT FLASH TO BE .010 MAX WITH NO FLASH EXTENDING BELOW
LEADS OR IN HOLES OF BODY.
8. MAX HEIGHT VARIATOIN BETWEEN ANY TWO PINS TO BE .003 [.08].
9. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH
ROWS MUST FACE SAME WAY.
NOTE:
DIMENSION APPLIES PRIOR TO RE-PRESS,
SEE SECTION "B-B" FOR FINISHED DIMENSION.
