tentative data sheet
product still under
development
Three Phase PSUT 130 IRMS = 3 x 120 A
AC Controller Modules PSUH 130 VRRM= 800-1800 V
Preliminary Data Sheet
Features
•Thyristor controller for AC (circuit
W3C acc. to IEC) for mains frequency
•Isolation voltage 3000 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL Release applied
Applications
•Switching and control of three
phase AC circuits
•Light and temperature control
•Softstart AC motor controller
•Solid state switches
Advantages
•Easy to mount with four screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-TOPTM 1
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
Symbol Test Conditions Maximum Ratings
IRMS TC = 85 °C; 50-400 Hz (per phase) 120 A
ITRMS 88 A
ITAVM TC = 85 °C; 180° sine 55 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 1300 A
VR = 0 t = 8.3 ms (60 Hz), sine 1400 A
TVJ = 125 °C t = 10 ms (50 Hz), sine 1150 A
VR = 0 t = 8.3 ms (60 Hz), sine 1300 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 8450 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 8100 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 6600 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 7000 A²s
(di/dt)cr TVJ = 125 °C repetitive, IT = 80 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.45 A non repetitive,IT = ITAVM 500 A/µs
diG/dt=0.45A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = 125 °C tP=30µs ≤10 W
IT =ITAVM tP=300µs ≤5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t = 1 s 3000 V∼
MdMounting torque (M5) 3 Nm
26 lb.in.
Weight typ. 86 g
VRSM V
RRM Type
VDSM VDRM
(V) (V)
900 800 PSUT 130/08 PSUH 130/08
1300 1200 PSUT 130/12 PSUH 130/12
1500 1400 PSUT 130/14 PSUH 130/14
1700 1600 PSUT 130/16 PSUH 130/16
1900 1800 PSUT 130/18 PSUH 130/18
V15
P1
N15
H1
G15
A1
S1 T1 U1
L1 M1 N1
Q15 R15 S15
D1 E1 F1
I15 J15 K15B15 C15 D15
W3H
W3C
V15
N15
G15
S1 T1 U1
L1 M1 N1
Q15 R15 S15
D1 E1 F1
I15 J15 K15B15 C15 D15
typical picture, for pin
configuration see outline
drawing
http://store.iiic.cc/
tentative data sheet
product still under
development
ECO-TOPTM 1
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Package style and outline
Dimensions in mm (1mm = 0.0394“)
Symbol Test Conditions Characteristic Value
ID,IRTVJ = 125°C, VR = VRRM, VD=VDRM ≤5mA
VTIT = 200 A, TVJ = 25 °C ≤1.57 V
VTO For power-loss calculations only 0.8 V
rT3.9 mΩ
VGT VD=6V TVJ= 25°C ≤1.5 V
TVJ=-40°C ≤1.6 V
IGT VD=6V TVJ= 25°C ≤100 mA
TVJ=-40°C ≤200 mA
VGD TVJ= 125°C VD=2/3VDRM ≤0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤10 mA
ILTVJ= 25°C, tP=10µs ≤450 mA
IG=0.45A, diG/dt=0.45A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤200 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤2µs
IG=0.45A, diG/dt=0.45A/µs
RthJC per thyristor; DC 0.55 K/W
per module 0.092 K/W
RthJH per thyristor; sine 180° el 0.7 K/W
per module 0.117 K/W
dsCreeping distance on surface (Pin to heatsink) min. 11.2 m m
dAStrike distance in air (Pin to heatsink) min. 11.2 m m
aMax. allowable acceleration 50 m/s²
W3C W3H
http://store.iiic.cc/
