WaveStation 3000
Function/Arbitrary Waveform Generator
Getting Started Guide
922868-00 Rev A
WaveStation 3000
Getting Started Guide
© 2013 Teledyne LeCroy, Inc. All rights reserved.
Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales and distribution
purposes is strictly prohibited. However, clients are encouraged to distribute and duplicate Teledyne LeCroy
documentation for their own internal educational purposes.
WaveStation, WaveAce, and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Other product or brand names
are trademarks or requested trademarks of their respective holders. Information in this publication supersedes all
earlier versions. Specifications are subject to change without notice.
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977
1.800.5.LECROY • teledynelecroy.com
WaveStation 3000 Getting Started Guide
WaveStation™
With 5 basic signal types, and over 30 built-in arbitrary waveforms the
WaveStation is a versatile waveform generator. A variety of modulation
schemes, intuitive waveform editing software and remote control
capabilities, enable versatile waveform generation of waveforms up to
160 MHz. The large color display and simple user interface make it easy
to generate a wide range of waveforms.
Specifications
Detailed specifications are maintained on the product page at
teledynelecroy.com.
Welcome
Thank you for buying a Teledyne LeCroy product. We’re certain you’ll
be pleased with the detailed features so unique to our instruments.
This Getting Started Guide is designed to cover important safety
and installation information for your waveform generator, along with
some basic operating procedures so you’re quickly working with the
instrument.
Overview
1
Key Specifications
Bandwidth 80 MHz – 160 MHz
Channels 2
Memory 512 kpts
Sample Rate 500 MS/s
Vertical Resolution 14-bit
Materials List
Check that you have all the parts listed here. Contact Teledyne LeCroy
immediately if any part is missing.
• One (1) Function/Arbitrary Waveform Generator
• One (1) AC Line (Power) Cord rated for the region
• One (1) USB2.0 Cable Type A to B
• One (1) USB to GPIB Converter
• One (1) Getting Started Guide
• One (1) Waveform Generator Registration Card
• One (1) Performance Certificate
• One (1) Declaration of Conformity
High Performance and Signal Fidelity
High performance hardware enables WaveStation to create accurate
stable waveforms. High sample rate and resolution combined with low
jitter and harmonic distortion means waveforms seen on the display are
accurately created and outputted by the hardware.
Graphical Waveform Creation
Easily create and edit waveforms on the PC with mathematical
operations, filters, and point-by-point editing or draw a waveform with
a mouse. Transfer waveforms to WaveStation over USB and view it
on the large display. Additionally, connecting a WaveAce oscilloscope
to the same PC enables seamless transfer of real world signals from
oscilloscope to the WaveStation.
2922868-00 Rev A
B
A
C
D
F
E
G
H
I
J
K
Front Panel
USB port for Memory Stick or
USB-GPIB connection
Power button
Color display
Softkey selection buttons
Numeric keypad
Function buttons
CH1/CH2 selection button
Adjust knob
Left/Right buttons
CH1 and CH2 Output buttons
CH1 and CH2 Output connectors
B
A
C
D
F
E
G
H
I
J
K
Overview
BNC terminals for Modulation In,
10 MHz In, 10 MHz Out, Synch
Out and Ext Trig/Gate/Fsk/Burst
USB 2.0 port for USBTMC
connections
Ground terminal
AC Power port
Back Panel
M
L
N
O
L
N
O
M
3
WaveStation 3000 Getting Started Guide
Back Panel A Tabs show which channel, waveform, or conditioning
settings are active. Change from gray to channel color
when active.
B Diagram displays active parameter in relation to
waveform.
C Menu of waveform, parameter, or utilities options.
Selected option is highlighted blue.
D Parameter values list. Active parameter is highlighted
white; active digit is highlighted blue.
Display
The large color display and simple user interface make it easy to generate a wide range of waveforms. The display shows all relevant waveform
parameters and the waveform shape. View the modulated waveform on the display and see how it changes when varying output frequency, carrier
waveform or modulation type.
A
B
C
D
Overview
4922868-00 Rev A
C
Basics
Generate a Basic Waveform
1. Press CH1/CH2 button A to select channel.
2. Press Waveform button B, then press softkey button C
to choose waveform type from option menu.
3. Press Parameter button D.
4. Adjust waveform parameters:
- Press softkey button C to select parameter.
- Press Left/Right button E to select digit.
- Turn knob F to change value.
5. Press CH1 or CH2 Output button Gto output the waveform.
Generate a Modulated Waveform
Complete the steps to generate a basic waveform, then:
1. Press Mod(ulate) button H.
2. Press softkey button C to select modulation type -
AM, FM, PM, FSK and others.
3. Press softkey button C to select shape of the
modulating waveform.
4. Adjust other modulation parameters.
5. Press CH1 or CH2 Output button Gto output the waveform.
5
WaveStation 3000 Getting Started Guide
B A
H
F
G
E
Adjust viewing position by gently pulling handle
away from sides and rotating.
Generate an Arbitrary Waveform
1. Press Waveform button B.
2. Press More softkey button C.
3. Press Arb softkey button C.
4. Press Built-in softkey button C.
5. Use softkeys to select arbitrary waveform type
from 30+ built-in waveforms.
6. Press CH1 or CH2 Output button G
to output the waveform.
D
6922868-00 Rev A
Precautions
Use proper power cord. Use only the power cord shipped with this
instrument and certified for the country of use.
Maintain ground. This product is grounded through the power
cord grounding conductor. To avoid electric shock, connect only to a
grounded mating outlet.
Observe all terminal ratings. Do not apply a voltage to any input that
exceeds the maximum rating of that input. Refer to the markings next
to the BNC terminals for maximum allowed values.
Use only within operational environment listed. Do not use in wet or
explosive environment. Use indoors only.
Keep product surfaces clean and dry.
Do not block the cooling vents. Leave a minimum six-inch (15 cm)
gap between the instrument and the nearest object. Keep the underside
clear of papers and other objects.
Do not remove the covers or inside parts. Refer all maintenance to
qualified service personnel.
Do not operate with suspected failures. Check body and cables
regularly. If any part is damaged, cease operation immediately and
sequester the instrument from inadvertent use.
Power
AC Power: 100 - 240 VAC (±10%) at 50/60 Hz (±5%) or 100 - 240 VAC
(±10%) at 400 Hz (±5%)
Maximum power consumption: 50 VA
safety
Safety
Observe generally accepted safety procedures in addition to the
precautions listed here.
Operating Environment
Temperature: 0° C to 40° C
Humidity: Maximum relative humidity 80% (non-condensing) for
temperatures up to 30° C decreasing linearly to 50% relative humidity
at 40° C.
Altitude: Up to 10,000 ft (3,048 m) at or below 30° C
Symbols
These symbols appear on the body of the instrument or in
documentation.
CAUTION of potential damage to equipment, or WARNING of
potential bodily injury. Do not proceed until the accompanying
information is fully understood and conditions are met.
Measurement ground connection.
Frame or chassis connection.
Safety (protective) ground connection.
Power on/off.
7
WaveStation 3000 Getting Started Guide
Warranty
NOTE: THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY
PARTICULAR PURPOSE OR USE. TELEDYNE LECROY SHALL NOT BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
IN CONTRACT OR OTHERWISE. THE CUSTOMER IS RESPONSIBLE FOR
THE TRANSPORTATION AND INSURANCE CHARGES FOR THE RETURN OF
PRODUCTS TO THE SERVICE FACILITY. TELEDYNE LECROY WILL RETURN ALL
PRODUCTS UNDER WARRANTY WITH TRANSPORT PREPAID.
The WaveStation is warranted for normal use and operation, within specifications,
for a period of three years from shipment. Teledyne LeCroy will either repair or, at
our option, replace any product returned to one of our authorized service centers
within this period. However, in order to do this we must first examine the product
and find that it is defective due to workmanship or materials and not due to
misuse, neglect, accident, or abnormal conditions or operation.
Teledyne LeCroy shall not be responsible for any defect, damage, or failure caused
by any of the following: a) attempted repairs or installations by personnel other
than Teledyne LeCroy representatives or b) improper connection to incompatible
equipment, or c) for any damage or malfunction caused by the use of non-Teledyne
LeCroy supplies. Furthermore, Teledyne LeCroy shall not be obligated to service a
product that has been modified or integrated where the modification or integration
increases the task duration or difficulty of servicing the instrument. Spare and
replacement parts, and repairs, all have a 90-day warranty.
The instrument's firmware has been thoroughly tested and is presumed to be
functional. Nevertheless, it is supplied without warranty of any kind covering
detailed performance. Products not made by Teledyne LeCroy are covered solely by
the warranty of the original equipment manufacturer.
MaiNteNaNce aND warraNty
Maintenance
• Clean the outside of the WaveStation using a soft cloth moistened
with water or isopropyl alcohol solution. Dry thoroughly. Do not use
harsh or abrasive cleansers. Do not submerge instrument or allow
moisture to penetrate.
• PerformSelfCal and SelfTest(s) as needed. See the
WaveStation 3000 Operator’s Manual for instructions.
• ScheduleFactory calibration once per year. Contact your local
Teledyne LeCroy office for service.
8922868-00 Rev A
Certifications
This section certifies the instrument’s Electromagnetic Compatibility
(EMC), Safety, and Environmental compliance.
EMC Compliance
EC DECLARATION OF CONFORMITY - EMC
The instrument meets intent of EC Directive 2004/108/EC for
Electromagnetic Compatibility. Compliance was demonstrated to the
following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006, EN 61326-2-1:2006 EMC requirements for electrical
equipment for measurement, control, and laboratory use.
Safety Compliance
EC DECLARATION OF CONFORMITY – LOW VOLTAGE
The instrument meets intent of EC Directive 2006/95/EC for Product
Safety. Compliance was demonstrated to the following specifications as
listed in the Official Journal of the European Communities:
EN 61010-1:2010 Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 1: General requirements
EN 61010-2:030:2010 Safety requirements for electrical equipment
for measurement, control, and laboratory use – Part 2-030: Particular
requirements for testing and measuring circuits
U.S. NATIONALLY RECOGNIZED AGENCY CERTIFICATION
The instrument has been certified by Underwriters Laboratories (UL) to
conform to the following safety standard and bears UL Listing Mark:
UL 61010-1 Third Edition, Safety standard for electrical measuring and
test equipment.
CANADIAN CERTIFICATION
The instrument has been certified by Underwriters Laboratories (UL) to
conform to the following safety standard and bears cUL Listing Mark:
CAN/CSA-C22.2 No. 61010-1-12 Safety requirements for electrical
equipment for measurement, control and laboratory use.
Environmental Compliance
END-OF-LIFE HANDLING
The instrument is marked with this symbol to indicate
that it complies with the applicable European Union
requirements to Directives 2002/96/EC and 2006/66/EC
on Waste Electrical and Electronic Equipment (WEEE)
and Batteries.
The instrument is subject to disposal and recycling regulations that vary
by country and region. Many countries prohibit the disposal of waste
electronic equipment in standard waste receptacles. For more information
about proper disposal and recycling of your Teledyne LeCroy product,
please visit teledynelecroy.com/recycle.
RESTRICTION OF HAZARDOUS SUBSTANCES (ROHS)
This instrument has been classified as Industrial Monitoring and Control
Equipment, and is outside the scope of the 2011/65/EU RoHS Directive
until 22 July 2017 (per Article IV, Paragraph 3).
certificatiONs
9
WaveStation 3000 Getting Started Guide
Teledyne LeCroy Service Centers
United States and Canada
World Wide Corporate Office
Teledyne LeCroy
700 Chestnut Ridge Road
Chestnut Ridge, NY, 10977-6499
Ph: 800-553-2769 / 845-425-2000
Fax: 845-578-5985
teledynelecroy.com
Support:
contact.corp@teledynelecroy.com
Sales:
customersupport@teledynelecroy.com
US Protocol Solutions Group
Teledyne LeCroy
3385 Scott Boulevard
Santa Clara, CA, 95054
teledynelecroy.com
Sales and Service:
Ph: 800-909-7211 / 408-727-6600
Fax: 408-727-0800
contact.corp@teledynelecroy.com
Support:
Ph: 800-909-7112 / 408-653-1260
psgsupport@teledynelecroy.com
Europe
Teledyne LeCroy SA
4, Rue Moïse Marcinhes
Case postale 341
1217 Meyrin 1
Geneva, Switzerland
Ph: +41 22 719 2228 / 2323 / 2277
Fax: +41 22 719 2233
contact.sales@teledynelecroy.com
applications.indirect@teledynelecroy.com
teledynelecroy.com/europe
Protocol Analyzers:
Ph: +44 12 765 0397 1
Singapore
Oscilloscopes:
Teledyne LeCroy Singapore Pte Ltd.
Blk 750C Chai Chee Road #02-08
Singapore 469003
Ph: ++ 65 64424880
Fax: ++ 65 64427811
Protocol Analyzers:
Genetron Singapore Pte Ltd.
37 Kallang Pudding Road, #08-08
Tong Lee Building Block B
Singapore 349315
Ph: ++ 65 9760-4682
Taiwan
LeColn Technology Co Ltd.
Far East Century Park, C3, 9F
No. 2, Chien-8th Road
Chung-Ho Dist., New Taipei City,
Taiwan
Ph: ++ 886 2 8226 1366
Fax: ++ 886 2 8226 1368
sales_twn@teledynelecroy.com
Korea
Teledyne LeCroy Korea
10th fl. Ildong Bldg.
968-5 Daechi-dong, Gangnam-gu
Seoul 135-280, Korea
Ph: ++82 2 3452 0400
Fax: ++82 2 3452 0490
China
Teledyne LeCroy Beijing
Rm. 2001 Unit A, Horizon Plaza
No. 6 Zhichun Rd., Haidian Dist.
Beijing 100088, China
Ph: ++86 10 8280 0318 / 0319 / 0320
Fax: ++86 10 8280 0316
Service:
Rm. 2002
Ph: ++86 10 8280 0245
Japan
Teledyne LeCroy Japan
Hobunsya Funchu Bldg, 3F
3-11-5, Midori-cho, Fuchu-Shi
Tokyo, 183-0006 Japan
Ph: ++ 81 4 2402 9400
Fax: ++ 81 4 2402 9586
teledynelecroy.com/japan
cONtact iNfOrMatiON
© 2013 Teledyne LeCroy, Inc. All rights reserved.
922868-00 Rev A