Product Description

3M™ Polyimide Film Tape 5413 with DuPont™ Kapton® polyimide film and silicone adhesive used for PCB solder

masking and other high temperature applications. This product is amber colored and 2.7 mil (69 microns) thick.

Features and Benefits

• The DuPont™ Kapton® polyimide film does not soften at elevated temperatures, thus the film provides an

excellent release surface at elevated temperatures

• Is dimensionally stable at high temperatures, which helps reduce rework, helping to enable high productivity

• Is flame retardant, chemical and radiation resistant which helps protect surfaces to help reduce replacement costs

• The silicone adhesive’s high temperature performance helps reduce adhesive transfer which helps to eliminate

Backing Dupont™ Kapton® Polyimide Film

Adhesive Silicone

Color Amber

Standard Roll Length 33 m (36 yd)

Application Ideas

• Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process.

• Release surface in fabrication of parts cured at elevated temperatures.

Storage and Shelf Life

The shelf life of 3M™ Polyimide Film Tape 5413 is 36 months from the date of manufacture when stored in original

cartons at 21°C (70°F) and 50% relative humidity.

3M™ Polyimide Film Tape 5413

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only, and should not

be used for specification purposes.

3M™ Polyimide Film Tape 5413

Property Value ASTM Test Method

Dielectric Strength: 7000 volts D-149

Outgassing: %TLM = 1.50; %CVCM = 0.50 —

per UL-510

Flame Retardancy: Pass product category:

OANZ2

File E230409

Regulatory

For regulatory information about this product, contact your 3M representative.

Technical Information

The technical information, recommendations and other statements contained in this document are based upon tests

or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether

direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,

negligence or strict liability.

Warranty, Limited Remedy, and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature,

3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.

3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED

WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product

does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product

©3M 2014. All rights reserved.

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax

3M™ Polyimide Film Tape 5413