LEDIL F'FORM OPTICS STRADA-B-XP LENSES FOR CREE XP-E LEDs - - Specially designed for Cree XP-E series of LEDs. New extremely wide street light design with very wide horizontal and vertical angle. Special care taken to make a uniform white or warm white illumination. Lens material optical grade PMMA with high UV and temperature resistance (105C/220F). Allows use of high current and temperature conditions. Best available optical efficiency, approximately 96%. Fastening to heat sink with or without PU foam adhesive tape of automotive grade, please select which suits the best for your needs. We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. Please check fastening details from this link: (http://www.ledil.com/datasheets/DataSheet_TAPE.pdf) LENS TYPES NAME ORDERING CODE Strada-B-XP C10926_Strada-B-XP CA10927_Strada-B-XP-tape Strada-B-XP-TAPE FWHM Angle 58 x 22 58 x 22 EULUMDAT & IES FILES AVAILABLE BY REQUEST (c) Ledil Oy - PRELIMINARY - Subject to change without prior notice Ledil Oy Tehdaskatu 13 FIN-24100 SALO, Finland www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 2011-03-07 LEDIL F'FORM OPTICS MEASUREMENT DATA (c) Ledil Oy - PRELIMINARY - Subject to change without prior notice Ledil Oy Tehdaskatu 13 FIN-24100 SALO, Finland www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 2011-03-07 LEDIL F'FORM OPTICS DRAWINGS (c) Ledil Oy - PRELIMINARY - Subject to change without prior notice Ledil Oy Tehdaskatu 13 FIN-24100 SALO, Finland www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 2011-03-07