Original Creation Date: 06/25/97
Last Update Date: 07/08/97
Last Major Revision Date: 06/25/97
CN54F04-X REV 0A0 MICROCIRCUIT DATA SHEET
HEX INVERTER
General Description
This device contains six independent gates, each of which performs the logic INVERT
function.
NS Part Numbers
54F04DC
Industry Part Number
54F04
Prime Die
M004
Processing
(blank)
Quality Conformance Inspection
(blank)
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +70
3 Static tests at 0
4 Dynamic tests at +25
5 Dynamic tests at +70
6 Dynamic tests at 0
7 Functional tests at +25
8A Functional tests at +70
8B Functional tests at 0
9 Switching tests at +25
10 Switching tests at +70
11 Switching tests at 0
1
MICROCIRCUIT DATA SHEET
CN54F04-X REV 0A0
Features
- Guaranteed 4000V minimum ESD protection
2
MICROCIRCUIT DATA SHEET
CN54F04-X REV 0A0
(Absolute Maximum Ratings)
(Note 1)
Storage Temperature -65 C to +150 C
Ambient Temperature under Bias -55 C to +125 C
Junction Temperature under Bias -55 C to +175 C
Vcc Pin Potential to Ground Pin -0.5V to +7.0V
Input Voltage
(Note 2) -0.5V to +7.0V
Input Current
(Note 2) -30 mA to +5.0mA
Voltage Applied to Output in HIGH State (with Vcc=0V) -0.5V to VccStandard Output -0.5V to +5.5VTRI-STATE Output
Current Applied to Output in LOW State (Max) twice the rated Iol(mA)
ESD Last Passing Voltage (Min) 4000V
Note 1: Absolute Maximum ratings are those values beyond which the device may be damaged or
have its useful life impaired. Functional operation under these conditions is not
implied.
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating Conditions
Free Air Ambient Temperature 0 C to +70 CCommercial
Supply Voltage +4.5V to +5.5VCommercial
3
CN54F04-X REV 0A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp range: 0C to +70C
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
VIH Input HIGH
Voltage Recongnized as a HIGH Signal 1 INPUTS 2.0 V 1, 2,
3
VIL Input LOW Voltage Recognized as a LOW Signal 1 INPUTS 0.8 V 1, 2,
3
VCD Input Clamp Diode
Voltage VCC=4.5V, IIN=-18mA 2, 3 INPUTS -1.2 V 1, 2,
3
VOH Output HIGH
Voltage VCC=4.5V, IOH=-1.0mA 2, 3 OUTPUTS 2.5 V 1, 2,
3
VCC=4.75V, IOH=-1.0mA 2, 3 OUTPUTS 2.7 V 1, 2,
3
VOL Output LOW
Voltage VCC=4.5V, IOL=20mA 2, 3 OUTPUTS 0.5 V 1, 2,
3
IIH Input HIGH
Current VCC=5.5V, VIN=2.7V 2, 3 INPUTS 5.0 uA 1, 2,
3
IBVI Input HIGH
Current Breakdown
Test
VCC=5.5V, VIN=7.0V 2, 3 INPUTS 7.0 uA 1, 2,
3
ICEX Output HIGH
Leakage Current VCC=5.5V, VOUT = VCC 2, 3 OUTPUTS 100 uA 1, 2,
3
VID Input Leakage
Test VCC = 0.0V, IID = 1.9uA,
All other pins grounded 2, 3 INPUTS 4.75 V 1, 2,
3
IOD Output Leakage
Circuit Current VCC = 0.0V, VIOD = 150mV,
All other pins grounded 2, 3 OUTPUTS 4.75 uA 1, 2,
3
IIL Input LOW Current VCC=5.5V, VIN=0.5V 2, 3 INPUTS -0.6 mA 1, 2,
3
IOS Output
Short-Circuit
Current
VCC=5.5V, VOUT = 0V 2, 3 OUTPUTS -60 -150 mA 1, 2,
3
ICCH Power Supply
Current VCC=5.5V, VO = HIGH 2, 3 VCC 4.2 mA 1, 2,
3
ICCL Power Supply
Current VCC=5.5V, VO = LOW 2, 3 VCC 15.3 mA 1, 2,
3
4
CN54F04-X REV 0A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS. Temp Range: 0C to +70C
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
tpLH Propagation Delay VCC=+5.0V @ +25C,
VCC=4.5V & 5.5V @ 0/+70C 2, 3 An to
On 2.4 5.0 ns 9
2, 3 An to
On 2.4 6.0 ns 10, 11
tpHL Propagation Delay VCC=+5.0V @ +25C,
VCC=4.5V & 5.5V @ 0/+70C 2, 3 An to
On 1.5 4.3 ns 9
2, 3 An to
On 1.5 5.3 ns 10, 11
Note 1: Guaranteed by applying specific input condition and testing VOL & VOH.
Note 2: Screen tested 100% on each device at +75C temperature only, subgroups A2 & A10.
Note 3: Sample tested (Method 5005, Table 1) on each MFG. lot at +75C temperature only,
subgroups A2 & A10.
5
MICROCIRCUIT DATA SHEET
CN54F04-X REV 0A0
Revision History
Rev ECN # Rel Date Originator Changes
0A0 M0001683 07/08/97 Linda Collins Legal issue with Fairchild, due to the
Fairchild/National split, is forcing the change from
CN74F which is'Fairchilds' product code to CN54F which
is 'Nationals' product code.
6
