Anetta SPECIFICATION FOR APPROVAL Customer Part No.: Rev.: A Delta Part No.: RJGE-12A6110D-R aD Part Name: RJ45 ICM (1000 Bage-T 12 Port) coun 1. Mechanical Dimension: A Yellow/Green | LED-1 Yellow/Green LED-2 4.10[0.161 1 0.429 mm /inch 07 / 3.428 7, 5.50 / 1.005 8 / 0.120 For Signal Leads 6 2. =. 0 / 0.180 For Led Leads 0 / 0.142 For GND Leads ete ee fe filet feet fe fleet fe det is 2.85 /1.293 MAX OP 01907 O 2 2] /O. 0 O 0 O[O%. 2 B40 10074 Unless otherwise specified, 1 Oh He MPe fe YP e %%H9 Se e909 2 Ae oo AO9 OF OP? WT all dimensions tolerances Oo a o a a a is +0.254 / 0.010 Wooo S coaqnwcacwn cm :: BOTTOM VIEW(3D DRAWING) FOR UPPER ROW RJ45 PORTS FOR LOWER ROW RJ45 PORTS Note: These four soldering joints are mainly for PCB fixing purpose, not for electrical connection or customer PCB layout. * This specification id the proprietary of Delta Electronics, Inc. Page 1 of 5 * This specification is only for preliminary review. If formal specification is required, please contact with our local Sales office or Rep.Anetta SPECIFICATION FOR APPROVAL Customer Part No.: Rev.: A Delta Part No.: RJGE-12A6110D-R Goi) Part Name: RJ45 ICM (1000 Bage-T 12 Port) cOmPEnKr 2. Label and Recommended PWB Layout: 2-1. Label: ~] | RIGE-12A6110D-R REV.A XXX | LC LI LC LI LC LI LABEL[23.00x5.00mm] / \ ar com [0.906x0.197inch] 2-2. Recommended PWB Layout (Component Side View): 11.81 [0.465] Connector Boundar 9.27 [0.365] ninector poundary 9.02 [0.355] = 13.97*5=69.85 [2.750] 120*#0,900.08 [60.035::0.003] 7.75 [0.305] 13.97*5=69.85 [2.750] 8.69 [0.145] 2491 0240.08 [#0.040:0.003] 2.42 [0.095] 2.16 [0.085] 0.38 [0.015] ) 8 PO = J alfa Pe o oO ooo 0 ooo 0 ooo 0 oO BoP A / | & ah of o& % of % o % of % ff a o Oo o Oo o Oo | 5 25 5 0 25 5 25 i | 2 25 2 25 2 25 Oo oO oO Oo oO oO Oo Oo oO o T oo? 8g 25 Pg 25 8g o rf 4*01.6040.13 [90.063+0.005] *) Oo O Ooo lomo) Ooo a IP 20 20 20 20 29, walod | 203.267 0-08 [ap.12et9.008) | | 24401.2040.08 [60.04740.003] 8/8/ S| seis sy TO SS} 8) Ss) s)2/s) 3) m~| ol os s| <| 3 SSR SE 2.54 [0.100] 2.79 [0.110] 1.27 [0.050] 1.27 [0.050] 2.79 [0.110] 9.60 [0.378] 12.14 [0.478] 43.23 [0.521] }+__________4#13.97=55.88 [2.200] 80.01 [3.150] 81.28 [3.200] Unit: mm/inch Plug-in side Tolerances: +0.10/0.004 * This specification is the proprietary of Delta Electronics, Inc. Page & of 9 * This specification is only for preliminary review. If formal specification is required, please contact with our local Sales office or Rep.Anetta SPECIFICATION FOR APPROVAL Customer Part No.: Rev.: A Delta Part No.: RJGE-12A6110D-R Goi) Part Name: RJ45 ICM (1000 Bage-T 12 Port) cOmPEnKr 2-3. Suggested Panel Opening: Metal Panel 2.16[0.085 Recommended Panel Cut Out 26.1[1.028 3. KeepOut Area (Component Side View): Connector Boundary O o00 0 Oooo 0 o0o0 0 Oooo 0 o0o0 0 O P % % oo % of % 6% % 6% % 4% % | oe 2 Gk Se ek Seek PO = | % of 22 o_o? 5 Q 5 . oO y 5 . o y 5 . oO p 5 . o 7A 5 . oO @ = ZL. 2 3.69 [0.145] 4.83 [0.190] 7.7% [0.305] 5.01 [0.197] =| Bl F 3] 6.41 [0.252] = = = s 18.98 [0.747] eo * 89.46 [3.522] > _j 1 FORBIDDEN Unit: mm/inch Plug-in side LAYOUT ARFA Tolerances: +0.10/0.004 * This specification is the proprietary of Delta Electronics, Inc. Page 3 of 5 * This specification is only for preliminary review. If formal specification is required, please contact with our local Sales office or Rep.Anetta SPECIFICATION FOR APPROVAL Customer Part No.: Delta Part No.: RJGE-12A6110D-R Part Name: RJ45 ICM (1000 Bage-T 12 Port) Rev.: A p) COMPLIANT 4. Circuit Schematic: Phy Side Line Side VCC 9 CH4+ Boo a sI[E o 7? MX3+ - 75 OHM PSHE ~ CH4- 7 o 8 MX3- 1CT:1CT CH38+ 6 Lees 7 4 MX2+ : 75 OHM CH3- 5 > 5 5 MX2- 1CT:1CT CH2+ 4 > : : > o 3 MXI+ Lewd I F 75 OHM ry SHE ~ CH2- 3 9 6 MX1- CHIt 2 5 Se 5 o 1 MXO+ Lee E 75 OHM ry Sle _ CHi- 1 o o 2 MX0- = 2*0.1uF 1. 1000pF 2.5KV GND 10 Shield Up LED Down LED DS Yellow m Yellow mM Yellow D3 Yellow Green Green Green Green D6 D8 D2 D4 Color Led Polarity Color Led Polarity Color Led Polarity Color Led Polarity Pin Green Yellow Pin Green Yellow Pin Green Yellow Pin Green Yellow DS + - D7 + - DL + - D3 + - D6 - + D8 - + pe - + D4 - + * This specification is the proprietary of Delta Electronics, Inc. Page 4 of 9 * This specification is only for preliminary review. If formal specification is required, please contact with our local Sales office or Rep.Anetta SPECIFICATION FOR APPROVAL Customer Part No.: Rev.: A Delta Part No.: RJGE-12A6110D-R Goi) Part Name: RJ45 ICM (1000 Bage-T 12 Port) cOmPEnKr 5. Electrical Characteristics: (Temp.: 20C~ 30C. Humidity: 40%RH~75%RH.) o-1.Insertion Loss: 1-100MHZ -1.0dB MAX. 100-125MHZ --1.2dB MAX, o<.Return Loss: 1 -40MHZ -16dB_ MIN. 40-60MHZ -12edB MIN. 60-80MHZ -10dB MIN. 80-100MHZ 8dB MIN. d-3.Cross Talk: 1-100MHz -30dB MIN. o-4.Common Mode Rejection Ratio: 1-100MHz -380dB MIN. D5.lsolation: Phy Side TO Line Side: 2250VDC 5-6.Primary Inductance: @100KHz,0.1Vrms,8mA Phy Side(12),(84),(56),(78): 350uH MIN. 5%.Turns Ratio: 100KHz (1-2):(2*-1*) = 1:145% (34):(6*-3*) = 1:145% (56):(5*-4*) = 1:145% (7-8):(8*7*) = 1:14+5% X* Means The Line Side Pin. * This specification id the proprietary of Delta Electronics, Inc. Page 5 of 9 * This specification is only for preliminary review. If formal specification is required, please contact with our local Sales office or Rep.