Document 581-1 Shielded Power Inductors - LPS5030 * Very low DCR; excellent current handling * 4.9 x 4.9 mm footprint; less than 3 mm tall Designer's Kit C420 contains 3 each of all values Core material Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 226 - 244 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7 reel; 2500/13 reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: 2.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20C 40C Part number1 20% (H) (Ohms) (MHz) drop drop drop rise rise LPS5030-901ML_ LPS5030-122ML_ LPS5030-172ML_ LPS5030-222ML_ LPS5030-332ML_ LPS5030-472ML_ LPS5030-562ML_ LPS5030-682ML_ LPS5030-822ML_ LPS5030-103ML_ LPS5030-123ML_ LPS5030-153ML_ LPS5030-183ML_ LPS5030-223ML_ LPS5030-333ML_ LPS5030-473ML_ LPS5030-683ML_ LPS5030-823ML_ LPS5030-104ML_ LPS5030-124ML_ LPS5030-154ML_ LPS5030-224ML_ LPS5030-334ML_ LPS5030-474ML_ LPS5030-564ML_ LPS5030-684ML_ LPS5030-105ML_ LPS5030-155ML_ LPS5030-185ML_ LPS5030-225ML_ LPS5030-335ML_ LPS5030-475ML_ 0.90 1.2 1.7 2.2 3.3 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 33.0 47.0 68.0 82.0 100 120 150 220 330 470 560 680 1000 1500 1800 2200 3300 4700 0.040 0.043 0.051 0.057 0.066 0.083 0.089 0.099 0.125 0.127 0.155 0.160 0.170 0.190 0.260 0.330 0.440 0.470 0.600 0.800 0.860 1.35 1.80 2.80 3.20 3.80 5.10 7.60 10.0 11.0 19.5 26.0 250 210 190 168 125 84 70 56 45 30 24 32 27 24 19 16 12 11 10 9 7.5 6.0 5.0 4.0 3.6 3.0 2.5 2.0 1.8 1.6 1.3 1.1 3.8 3.5 3.0 2.9 2.3 1.9 1.8 1.6 1.6 1.4 1.3 0.80 0.80 0.70 0.60 0.50 0.40 0.38 0.27 0.26 0.22 0.21 0.155 0.117 0.110 0.100 0.100 0.068 0.069 0.063 0.056 0.049 4.0 3.6 3.2 3.1 2.5 2.0 1.8 1.7 1.7 1.4 1.4 0.90 0.82 0.75 0.63 0.53 0.43 0.40 0.31 0.29 0.25 0.235 0.155 0.134 0.130 0.120 0.110 0.080 0.081 0.074 0.063 0.056 4.1 3.7 3.3 3.2 2.6 2.0 1.9 1.7 1.7 1.4 1.4 0.90 0.87 0.78 0.64 0.55 0.44 0.40 0.32 0.30 0.263 0.245 0.200 0.146 0.140 0.126 0.110 0.089 0.086 0.080 0.067 0.059 2.10 2.00 1.90 1.60 1.40 1.30 1.25 1.20 1.10 1.00 0.95 0.92 0.90 0.88 0.85 0.75 0.65 0.60 0.55 0.45 0.42 0.36 0.32 0.28 0.23 0.20 0.18 0.15 0.13 0.10 0.090 0.080 2.80 2.65 2.50 2.15 1.80 1.75 1.65 1.60 1.55 1.50 1.40 1.40 1.30 1.25 1.20 1.00 0.900 0.830 0.750 0.660 0.570 0.500 0.420 0.370 0.320 0.290 0.250 0.210 0.170 0.150 0.125 0.110 1. Please specify termination and packaging codes: LPS5030-105MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tinlead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 581-1 Revised 01/23/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 581-2 Shielded Power Inductors - LPS5030 Series Typical L vs Frequency Typical L vs Current 10000 10000 3300 H 3300 H 1000 H 330 H 100 H 100 33 H 10 H 10 1000 H 1000 Inductance (H) Inductance (H) 1000 330 H 100 H 100 33 H 10 H 10 3.3 H 3.3 H 1 0.01 1 0.1 10 Frequency (MHz) Typical Current Derating 1 0.01 0.1 1 10 0.189 0.003* 4,80 0,076 120 110 0.189 0.003* 4,80 0,076 100 XXX X 90 80 70 Dash number 60 Winding direction Internal code 50 0.114 0.004 ** 2,9 0,1 40 30 20 10 0 25C Percent of rated current Current (A) Isat Irms -40 -20 0 20 Recommended Land Pattern 0.060 1,50 40 60 80 100 0.134 3,40 120 140 Ambient temperature (C) 0.039 typ 1,00 0.217 5,51 0.0665 1,689 0.134 3,40 0.134 3,40 0.060 0.039 typ 1,00 1,52 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. 0.134 3,40 0.217 5,51 optional tin-lead and tin-silver-copper **For terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 581-2 Revised 01/23/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.