AZ6951 SENSITIVE SUBMINIATURE RELAY FEATURES * Extremely small footprint utilizing only 0.18 square inch of PCB area * Thin vertical profile only 0.25" wide * 1 Form A contact with up to 5 Amp switching capability * High sensitivity, 100mW pickup * Dielectric strength 3000Vrms contact to coil * Coils to 24VDC * Epoxy sealed for automatic wave soldering and cleaning * UL/CUR File E43203 CONTACTS GENERAL DATA Arrangement SPST- N.O. (1 Form A) Ratings Resistive load: UL Ratings Material Resistance Max. switched power: 150W or 1250VA Max. switched current: 5A Max. switched voltage: 30VDC or 250VAC 5A at 30VDC resistive 5A at 250VAC resistive Options: Silver tin oxide Silver tin oxide with gold plating < 100 milliohms initially (6V, 1A, voltage drop method) COIL Power Life Expectancy Mechanical Electrical Minimum operations 20 million operations 1 X 105 at 5A, 30VDC or 250VAC Res. Operate Time (typical) 6ms at nominal coil voltage Release Time (typical) 3ms at nominal coil voltage (with no coil suppression) Dielectric Strength 750Vrms between open contacts (at sea level for 1 min.) 3000Vrms contact to coil Insulation Resistance 1000 megohms min. at 20C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -25C (-30F) to 70C (158F) -40C (-40F) to 105C (221F) Vibration 0.062" DA at 10-55 Hz At Pickup Voltage (typical) 100mW Shock 10 g Max. Continuous Dissipation 550mW at 20C (68F) ambient 420mW at 40C (104F) ambient 25C (45F) at nominal coil voltage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 3 grams Temperature Rise Temperature Max. 105C (221F) NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 2/08/16 AZ6951 RELAY ORDERING DATA ORDER NUMBER* COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 6.5 6 7.8 Coil Resistance 10% 125 Must Operate VDC 3.5 1 Form A (SPST- N.O.) AZ6951-5 180 4.2 AZ6951-6 9 11.7 405 6.3 AZ6951-9 12 15.6 720 8.4 AZ6951-12 18 23.4 1,620 12.6 AZ6951-18 24 31.2 2,880 16.8 AZ6951-24 * Add suffix "G" for gold plated contacts 0.02 0.689 0.252 (0.50) (17.50) (6.40) (5.08) 0.2 MECHANICAL DATA (2.54) (7.62) (5.08) 0.488 0.2 (12.40) 0.3 0.138 0.1 (3.50) 0.044 (1.13) 0.012 0.02 0.031 (0.50) (0.80) PC BOARD LAYOUT (0.30) WIRING DIAGRAM .043 (1.1) DIA 13 0.2 (5.08) 0.2 (5.08) 0.3 (7.62) 0.1 (2.54) Viewed toward terminals 7 5 1 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 2/08/16