Multilayer Ceramic Chip Capacitors NMC Series X7R FEATURES * CLASS II DIELECTRIC, TEMPERATURE STABLE * EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR RoHS CAPACITANCE CHANGE Compliant * HIGHER CAPACITANCE THAN NPO Includes all homogeneous materials * NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH *See Part Number System for Details SPECIFICATIONS Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor 47pF ~ 0.82F (see high CV datasheet for higher capacitance values) 5% (J), 10% (K), 20% (M) -55C ~ +125C 15% max. over temperature range (with 0 Vdc applied) 10Vdc, 16Vdc, 25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher voltages) 2.5% max. (50Vdc, 100Vdc); 3.5% max. (16Vdc, 25Vdc) 5% max. (10Vdc) @ 1.0Vrms and 1KHz, +25C insulation Resistance 10,000Megohms min. or 500Megohm/F min. whichever is less @ +25C Dielectric Withstanding Voltage 250% of Rated Voltage for 1 ~ 5 seconds, 50mA maximum current Test Conditions (EIA-198-2E) 1KHz, 1.0V 0.2Vrms Note: Reflow soldering allowed for all case sizes. Contact NIC for wave soldering restrictions. Voltage Coefficient of Capacitance - X7R % Capacitance Change % Capacitance Change Typical X7R Temperature Coefficient Temperature C DC Volts Applied % Dissipation Factor vs. Temperature 10000 Frequency (MHz) Insulation Resistance ( Farads) Impedance % Dissipation Factor Impedance vs. Frequency - X7R Temperature C Minimum Insulation Resistance vs. Temperature 1000 100 10 10 25 100 125 Temperature C PART NUMBER SYSTEM NMC 0805 X7R 102 K 50 TRP or TRPLP 3K 7C3 F RoHS Compliant Optional RoHS 7C-III Exemption Free* Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, "R" indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series * - Part Number Level Identification of X7R MLCCs that do not take RoHS exemption 7C-III (R) 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors X7R CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0201 0.60.03 0.30.03 0.33 0.150.05 16 25 50 0402 1.00.05 0.50.05 0.6 0.20.1 10 16 25 NMC Series X7R 0603 1.60.15 0.80.15 1.0 0.12 ~ 0.51 Working Voltage (Vdc) 50 10 16 25 50 100 10 47pF ~ 91pF 100pF ~ 470pF 510pF 560pF 620pF 680pF 750pF 820pF 910pF 0.001F 0.0012F 0.0015F 0.0018F 0.0022F 0.0027F 0.0030F 0.0033F 0.0039F 0.0047F 0.0056F 0.0068F 0.0075F 0.0082F 0.01F 0.012F 0.015F 0.018F 0.022F 0.033F 0.039F 0.047F 0.056F 0.068F 0.082F 0.1F 0.15F 0.18F 0.22F 0.33F 0.39F 0.47F 0.56F 0.68F 0.82F 0805 2.00.2 1.250.2 1.35 0.25 ~ 0.71 16 25 50 * * * * * * * * * * * * * * * * * * * * * * * * 100 * * * * * * (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) *1.45mm maximum thickness W See NMC High CV series for values above 0.82F T P P L (R) 2 100% Sn over Ni barrier NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors X7R CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1206 3.20.2 1.60.2 1.80 0.25 ~ 0.71 10 16 25 50 100 10 NMC Series X7R 1210 1812 2225 3.20.2 4.50.3 5.70.4 2.50.2 3.20.25 6.350.25 1.80 1.8 1.80 0.25~0.75 0.25 ~ 0.75 0.25 ~ 1.02 Working Voltage (Vdc) 16 25 35 50 100 10 16 25 50 100 25 50 100 150pF ~ 910pF 0.001 0.0012F 0.0015F 0.0018F 0.0022F 0.0027F 0.0033F 0.0036F 0.0039F 0.0043F 0.0047F 0.0056F 0.0068F 0.0075F 0.0082F 0.01F 0.012F 0.015F 0.018F 0.022F 0.027F 0.033F 0.036F 0.039F 0.043F 0.047F 0.056F 0.068F 0.082F 0.1F 0.12F 0.15F 0.18F 0.22F 0.27F 0.33F 0.39F 0.47F 0.56F 0.68F 0.82F * * * 2.20mm maximum thickness See NMC High CV series for values above 0.82F W H P P L (R) 3 100% Sn over Ni barrier NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7" (178 2.0) 10" (250 2.0) 13" (330 2.0) B D B C 50 min. 100 1.0 100 1.0 13 0.5 D T max. 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 21 1.0 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 01005 8mm 0201 8mm 0402 8mm 0603 8mm 0805 8mm 1206 8mm 1210 8mm 1812 12mm 20,000 20,000 10,000 4,000 4,000 4,000 2,000 1,000 20,000 20,000 10,000 4,000 5,000 5,000 5,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 0.2 3.5 0.05 12mm 12 0.2 5.5 0.05 E P0 P2 D K max. 1.75 0.10 4.0 0.1 2.0 0.5 1.5 +0.1-0.0 3.0 Notes: 1. Specifications are in compliance with EIA RS481-1-A "Taping of surface Mount Components for Automatic Placement" 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 0.1 4.5 8.0 0.1 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F Bo W Ao P K See notes 2 & 3 regarding dimensions Ao and Bo PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 01005 0.25 0.04 0.45 0.04 0201 0.37 0.03 0.67 0.05 0402 0.65 0.05 1.15 0.05 0603 1.1 0.2 1.9 0.2 0805 1.65 0.2 2.4 0.2 1206 2.0 0.2 3.6 0.2 W F E P1 P0 D0 4.0 0.1 1.5 +0.1/-0.0 2.0 0.05 8.0 0.3 3.5 0.05 1.75 0.1 4.0 0.10 T1 max. 0.27 0.45 T2 max. 0.36 0.80 1.1 1.4 Mounting Hole Angular Punch Hole PUNCHED CARRIER TAPE D Po t1 E F Bo (R) 4 t2 NIC COMPONENTS CORP. www.niccomp.com Ao W P1 Component Pitch www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com