PHONE: 800-245-3573 www.3M.com/Electrical 193
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Inline
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and
5516A Series
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire
shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with
copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²). The cold shrink splice body is a one-piece molded design made of
special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory
tested to provide reliability.
The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions
within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage
class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one
splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®,
Longitudinally Corrugated (LC) Shield
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5513A 051128-53480 0.64"-1.01" (16,3-25,7 mm) 2-4/0 AWG – 1
5513A-2-AL 051128-53481 0.64"-1.01" (16,3-25,7 mm) 2 AWG 20003 1
5513A-2-CU 051128-53482 0.64"-1.01" (16,3-25,7 mm) 2 AWG 10003 1
5513A-1-AL 051128-53483 0.64"-1.01" (16,3-25,7 mm) 1 AWG 20004 1
5513A-1-CU 051128-53484 0.64"-1.01" (16,3-25,7 mm) 1 AWG 10004 1
5513A-1/0-AL 051128-53485 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 20005 1
5513A-1/0-CU 051128-53486 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 10005 1
5513A-2/0-AL 051128-53487 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 20006 1
5513A-2/0-CU 051128-53488 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 10006 1
5513A-3/0-AL 051128-53489 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 20007 1
5513A-3/0-CU 051128-53490 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 10007 1
5513A-4/0-AL 051128-53491 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 20008 1
5513A-4/0-CU 051128-53492 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 10008 1
5514A 054007-44101 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG-500 kcmil – 1
5514A-CA-1 051128-57151 0.64"-1.38" (16,3-35,1 mm) 2 AWG-500 kcmil – 1
5514A-4/0-AL 054007-44102 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 20008 1
5514A-4/0-CU 054007-44103 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 10008 1
5514A-250-AL 054007-44104 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 20009 1
5514A-250-CU 054007-44105 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 10009 1
5514A-350-AL 054007-44106 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 20011 1
5514A-350-CU 054007-44107 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 10011 1
5514A-500-AL 054007-44407 0.84"-1.38" (21,3-35,1 mm) 500 kcmil 20014 1
5514A-500-CU 054007-44408 0.84"-1.38" (21,3-35,1 mm) 500 kcmil 10014 1
5515A 054007-42134 1.04"-1.70" (26,4-43,2 mm) 350-750 kcmil – 1
5515A-350-AL 054007-42135 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 20011 1
5515A-350-CU 054007-42898 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 10011 1
5515A-500-AL 054007-42899 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 20014 1
5515A-500-CU 054007-42136 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 10014 1
5515A-750-AL 054007-42900 1.04"-1.70" (26,4-43,2 mm) 750 kcmil 20019 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 193