RF Coax Connectors COAXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable on the market COAXICON contacts are of the crimp, snap-in type and are available in the following designs: Miniature Contacts, Subminiature Contacts and Size 8 Contacts Miniature Contacts are designed for high density multiple circuit connector applications. A wide range of cable sizes is accommodated by using three sizes of outer shell termination ends and three sizes of contacts. Subminiature Contacts are used in high density applications and are ideal for mixing coaxial and other styles of pin and socket contacts in the same connector housing. Size 8 Contacts are compatible with industry standard size 8 connectors such as Subminiature D and AMP-HDI connector housings. Straight and right-angle styles, as well as pc board versions for AMP-HDI connectors are available. 244 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Miniature Contacts Performance Characteristics Insulation Resistance -- 5000 megohms min Dielectric Withstanding Voltage -- 1,000 volts rms for 1 minute Contact Resistance -- 2.0 milliohms @ 1 ampere Low-Level Conductivity -- 10 millivolts DC min. VSWR -- 1.3 to 1.0 @ 1,000 MHz max. Cable Retention -- RG/U Cable 58C 188A 180B 195A Retention lbs [N] 50 [222] 30 [133] 28 [125] 16 [71] Temperature Range -- -55C to +125C Test Method for Electronic and Electrical Component Parts -- MIL-STD-202 Material Inner Dielectric -- Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring -- Stainless steel per QQ-S-766 Ferrule -- Copper per QQ-C-576 Finish Outer Shell, Center Conductor -- 0.00076 [.000030] gold over 0.00076 [.000030] nickel Retention Spring -- Nickel per QQ-N-290 Ferrule -- Bright tin per MIL-T-10727 Outer Shell -- Brass per MIL-C-50 Center Conductor -- Brass per QQ-B-626, or Beryllium copper per QQ-C-533 Retention Springs Part No. 201142-2 Note: A ferrule and retention spring (201142-2) are required for each pin and socket. Extraction Tool No. 305183-8 Durability -- 500 cycles @ 10 cycles per minute max. Vibration -- 2 hrs. per MIL-STD-202, Method 201 Shock -- 50 G's per MIL-Std-202, Method 213, Cond. G Temperature Cycling -- 5 cycles per MIL-STD-202, Method 102, Cond C. Ferrules Socket Pin RG/U Cable Ferrule No. Integral Die Hand Tool PRO-CRIMPER Die Insert for Tools: Hand Tool 69710-1 Pneu. 69365-2, 69365-32 316, 188, 188A 174 179, 179A, 179B 161, 187, 187A Belden 9221 188 Double Braid 316 Double Braid 122 180, 180A, 180B 195, 195A, 21-597 Belden 8218 58, 58A, 58B, 58C 141 55, 55A, 55B, 223 124, 140, 210 62, 62A, 62B 59, 59A, 59B 328666-X -- -- 69227-2 201143-5 201144-5 328666-X -- -- 69227-2 201143-1 201144-1 221848-3 58290-1 -- 69227-2 201143-5 201144-5 328664-X 45639-2 91912-3 69222-2 201145-1 -- 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 328664-X 328663-X 330478-X 45639-2 45740-2 91912-3 -- 69222-2 69220-2 201145-2 201145-4 201146-2 201146-4 69248-4 -- 69315-4 201145-4 201146-4 329006-X -- -- 69675-1 201097-1* 201098-1* 328666-X 91912-4 -- 69672-X 201143-5 201144-5 328663-X 45740-2 -- 69220-2 201145-4 201146-4 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 Twisted Pair 24-22 AWG [0.2-0.4 mm2] (Stranded)1 Shielded Wire 22, NAS-702, Class B Brand Rex T5788A 26 AWG [0.12-0.155 mm2]3 Part Numbers Pin Socket *These contacts are for use in the 4-position G Series connector modules only. 1Maximum insulation diameter-2.92 [.115] (two wires combined). 2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689. 3Dielectric O.D.-2.69 [.106] max.; Cable O.D.-4.06 [.160]. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 245 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Miniature PC Board Sockets Material Shell and Center Contact -- Brass per MIL-C-50 and QQ-B-626 Dielectric -- Polypropylene, or Polymethylpentene, general purpose Shell Finish Spring Latch Center Contact -- 0.00076 [.000030] gold over copper Shell -- Gold plated per MIL-G-45204 Performance Characteristics Dielectric Withstanding Voltage -- 1,000 volts, rms Impedance -- Non-constant Operating Temperature Range -- -55C to +85C 15.24 [.600] 12.7 [.500] 2.54 [.100] 2.54 [.100] Locking Latch Center Conductor Spring Latch Locking Latch 2.54 Ref. [.100] 2.54 Ref. [.100] 6.23 [.245] 4.52 Dia. [.178] Ref. 1.32 [.052] Dia. (5 Holes) A 0.36 Ref. [.014] Recommended Mounting Hole Layout B 12.7 [.500] 1.27 Typ. [.050] Type Spring Latch Spring Latch Locking Latch Locking Latch PC Board Thickness 1.57 .062 3.18 .125 3.18 .125 1.57 .062 2.54 [.100] 17.78 [.700] Retention lb. [N] 1.25 5.56 1.25 5.56 7.25 31.16 7.25 31.16 1.02 Dia. [.040] Dimensions A B 9.07 3.18 .357 .125 7.49 4.75 .295 .187 7.49 4.75 .295 .187 9.07 3.18 .357 .125 Part No. 50084-1 50095-1 50105-1 50107-1 Note: For mateable Miniature Contacts, see page 245. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 246 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Subminiature PC Board Sockets Material Shell and Center Contact -- Brass per MIL-C-50 and QQ-B-626 Dielectric -- Polypropylene, or polymethylpentene, general purpose Shell Locking Latch Finish Center Contact -- 0.00076[.000030] gold per MIL-G-45204 over copper per MIL-C-14550 Shell -- Gold Performance Characteristics Spring Latch Center Conductor Dielectric Withstanding Voltage -- 600 volts, rms Operating Temperature Range -- -55C to +85C 1.09 Dia. [.043] #57 Drill (3 Holes) 22.23 Max. [.875] 3.05 .0.2 [.120 .008] 4.52 [.178] 1.47 [.058] Locking Latch A 0.840.2 [.033.008] 10.16 [.400] 15.24 [.600] 0.84 Dia. [.033] 10.16 [.400] 15.24 [.600] Recommended Mounting Hole Layout PC Board Thickness 1.57 .062 1.57 .062 Type Spring Latch Locking Latch Dim. L 2.54 .100 2.54 .100 Part No. 226023-1 226060-1 Mating Subminiature COAXICON Pins These short Subminiature COAXICON Pins are recommended for use with any of the sockets listed above. Note: Alignment springs are not required for this application and are not included with the pin assemblies. RG/U Cable Ferrule No. Integral Die Hand Tool Die Insert for Tools: Hand Tool 69710-1 Pneu. 69365-2, 69365-3 Part No. 174 316, 188, 188A 179, 179A, 179B 187, 187A 161 1-332056-0 91911-3 69690-X 51563-8 1-332056-0 91911-4 69690-1 51563-8 1-332056-0 69656-5 -- 51563-8 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 247 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Subminiature Contacts Material Outer Shell -- Brass per MIL-C-50 Center Conductor -- Beryllium copper per QQ-C-533 (Pin); Brass per QQ-B-626 (Socket) Inner Dielectric -- Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring -- Stainless steel per QQ-S-766 Ferrule -- Copper per QQ-C-576 Ferrule A Ferrule Finish Outer Shell and Socket Center Conductor -- 0.00076 [.000030] gold over 0.00127 [.000050] nickel Pin Center Conductor -- 0.00076 [.000030] gold over 0.00254 [.000100] copper Ferrule -- Bright tin per MIL-T-10727 16.51 Max. [.650] Pin Socket A = Multimate Pin 25.65 [1.010] Short Pin 22.66 [.892] Selection Chart for Coaxial Cable RG/U Cable 178, 178A, 178B 196, 196A 196 (Double Braid) 174, 316 188, 188A 179, 179A, 179B 187, 187A Belden 9221 RD-316 187 (Double Braid) 161 Die Insert for Tools: Hand Tool 69710-1 Pneu. Tool 69365-2, 69365-3* Multimate Pin 69656-2 69690-2 226537-2 -- 51565-2 1-332057-0 69656-9 -- 226537-2 -- 51565-2 1-225088-1 Integral Die Hand Tool PRO-CRIMPER Contact Part Numbers Short Socket Ferrule Pin -- 91911-3 69690 -226537-1 -- 51565-1 1-332056-0 -- 911911-4 69690-1 226537-1 -- 51565-1 1-332056-0 69656-7 -- 226537-1 -- 51565-1 1-225088-3 69656-8 -- 226537-1 -- 51565-1 1-225088-1 69656-5 -- 226537-1 -- 51565-1 1-332056-0 Selection Chart for Twisted Pairs and Shielded Wire Wire Size AWG 30 (Twisted Pair, Solid) 28 (Twisted Pair, Solid) 28 (Twisted Pair, Stranded; 7 str., .005 [0.13] Dia.) 26 (Twisted Pair, Solid or Stranded; 7 str., .0063 [0.16] Dia.) 26 (Shielded, 0.75 [1.91] Max. O.D.) [mm2] Integral Die Hand Tool PRO-CRIMPER Die Insert for Tools: Hand Tool 69710-1 Pneu. Tool 69365-2, 69365-3* 0.05 69656-2 -- 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.08-0.09 -- 91911-3 69690- 226537-3 51563-3 51565-3 1-332057-0 0.08-0.09 -- 91911-4 69690-1 or 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.12-0.15 -- 91911-3 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.12-0.15 69656-3 -- 69690-3 226537-1 Multimate Pin Contact Part Numbers Short Socket Ferrule Pin -- 51565-1 1-332057-0 *Includes bench mount and foot control. Extraction Tool 305183 Note: A ferrule is required for each pin and socket. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 248 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208