201143-5 - Tyco Electronics

244

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

COAXICON Contacts

Product Facts

■Tyco Electronics provides

a variety of contacts for

coaxial connectors

■Contacts are available in

a range of sizes that may

be used with the various

types of coaxial cable on

the market

■COAXICON contacts are of

the crimp, snap-in type and

are available in the follow-

ing designs: Miniature

Contacts, Subminiature

Contacts and Size 8 Contacts

Miniature Contacts are

designed for high density

multiple circuit connector

applications. A wide range

of cable sizes is accommo-

dated by using three sizes

of outer shell termination

ends and three sizes of

contacts.

Subminiature Contacts

are used in high density

applications and are ideal

for mixing coaxial and other

styles of pin and socket

contacts in the same con-

nector housing.

Size 8 Contacts are com-

patible with industry stan-

dard size 8 connectors

such as Subminiature D

and AMP-HDI connector

housings. Straight and

right-angle styles, as well

as pc board versions for

AMP-HDI connectors are

available.

Miniature Contacts

Inner Dielectric—Polypropylene,

nylon, or polymethylpentene, general

purpose

Retention Spring —Stainless steel

per QQ-S-766

Ferrule —Copper per QQ-C-576

Performance Characteristics

Insulation Resistance —5000

megohms min

Dielectric Withstanding Voltage—

1,000 volts rms for 1 minute

Contact Resistance —2.0 milliohms

@ 1 ampere

Low-Level Conductivity —10 milli-

volts DC min.

VSWR—1.3 to 1.0 @ 1,000 MHz max.

Cable Retention —

RG/U Retention

Cable lbs [N]

58C 50 [222]

188A 30 [133]

180B 28 [125]

195A 16 [71]

Durability—500 cycles @ 10 cycles

per minute max.

Vibration —2 hrs. per MIL-STD-202,

Method 201

Shock —50 G’s per MIL-Std-202,

Method 213, Cond. G

Temperature Cycling—5 cycles per

MIL-STD-202, Method 102, Cond C.

Temperature Range—-55°C to

+125°C

Test Method for Electronic and

Electrical Component Parts —

MIL-STD-202

Material

Outer Shell —Brass per MIL-C-50

Center Conductor —Brass per

QQ-B-626, or Beryllium copper

per QQ-C-533

Finish

Outer Shell, Center Conductor —

0.00076 [.000030] gold over 0.00076

[.000030] nickel

Retention Spring —Nickel per

QQ-N-290

Ferrule —Bright tin per MIL-T-10727

Note:

A ferrule and retention spring

(201142-2) are required for each pin

and socket.

Extraction Tool No. 305183-8

Die Insert for Tools: Part Numbers

RG/U Cable Ferrule Integral Die PRO-CRIMPER Hand Tool 69710-1

No. Hand Tool Pneu. 69365-2, Pin Socket

69365-32

316, 188, 188A 328666-X —— 69227-2 201143-5 201144-5

174

179, 179A, 179B

161, 187, 187A 328666-X —— 69227-2 201143-1 201144-1

Belden 9221

188 Double Braid 221848-3 58290-1 — 69227-2 201143-5 201144-5

316 Double Braid

122 328664-X 45639-2 91912-3 69222-2 201145-1 —

180, 180A, 180B

195, 195A, 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2

21-597

Belden 8218 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2

58, 58A, 58B, 58C 328663-X 45740-2 — 69220-2 201145-4 201146-4

141 330478-X 69248-4 — 69315-4 201145-4 201146-4

55, 55A, 55B, 223

124, 140, 210

62, 62A, 62B 329006-X —— 69675-1 201097-1* 201098-1*

59, 59A, 59B

Twisted Pair

24-22 AWG [0.2-0.4 mm2]328666-X 91912-4 — 69672-X 201143-5 201144-5

(Stranded)1

Shielded Wire 328663-X 45740-2 — 69220-2 201145-4 201146-4

22, NAS-702, Class B

Brand Rex T5788A 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2

26 AWG [0.12-0.155 mm2]3

*These contacts are for use in the 4-position G Series connector modules only.

1Maximum insulation diameter–2.92 [.115] (two wires combined).

2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689.

3Dielectric O.D.–2.69 [.106] max.; Cable O.D.–4.06 [.160].

Ferrules

Pin Socket

Retention Springs

Part No. 201142-2

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

245

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

246

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Miniature PC Board Sockets

Material

Shell and Center Contact —Brass

per MIL-C-50 and QQ-B-626

Dielectric —Polypropylene, or

Polymethylpentene, general purpose

Finish

Center Contact —0.00076 [.000030]

gold over copper

Shell —Gold plated per MIL-G-45204

Performance Characteristics

Dielectric Withstanding Voltage—

1,000 volts, rms

Impedance —Non-constant

Operating Temperature Range —

-55°C to +85°C

15.24

[.600]

2.54

[.100] 12.7

[.500]

2.54

[.100] 1.32 Dia.

[.052]

(5 Holes)

Recommended

Mounting Hole Layout

Spring Latch

Shell

Center Conductor

Locking Latch

2.54 Ref.

[.100]

4.52 Dia.

[.178]

Ref.

Spring

Latch

2.54 Ref.

[.100]

0.36 Ref.

[.014]

1.27 Typ.

[.050]

12.7

[.500] 2.54

[.100]

17.78

[.700]

1.02 Dia.

[.040]

6.23

[.245]

Type PC Board Retention Dimensions Part No.

Thickness lb. [N] A B

Spring Latch 1.57 1.25 5.56 9.07 3.18 50084-1

.062 .357 .125

Spring Latch 3.18 1.25 5.56 7.49 4.75 50095-1

.125 .295 .187

Locking Latch 3.18 7.25 31.167.49 4.75 50105-1

.125 .295 .187

Locking Latch 1.57 7.25 31.169.07 3.18 50107-1

.062 .357 .125

Note: For mateable Miniature Contacts, see page 245.

Locking Latch

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Subminiature PC Board Sockets

Material

Shell and Center Contact —Brass

per MIL-C-50 and QQ-B-626

Dielectric —Polypropylene, or

polymethylpentene, general purpose

Finish

Center Contact —0.00076[.000030]

gold per MIL-G-45204 over copper per

MIL-C-14550

Shell —Gold

Performance Characteristics

Dielectric Withstanding Voltage—

600 volts, rms

Operating Temperature Range —

-55°C to +85°C

1.09 Dia.

[.043]

#57 Drill

(3 Holes)

10.16

[.400]

15.24

[.600]

Recommended

Mounting Hole Layout

Locking Latch

Shell

Center Conductor

Spring Latch

22.23 Max.

[.875]

Locking

Latch

1.47 [.058]

0.84±0.2

[.033±.008]10.16

[.400]

15.24

[.600]

0.84 Dia.

[.033]

4.52

[.178]

3.05 ±.0.2

[.120 ±.008]

Mating Subminiature

COAXICON Pins

These short Subminiature COAXICON

Pins are recommended for use with any

of the sockets listed above.

Note: Alignment springs are not

required for this application and are not

included with the pin assemblies.

Type PC Board Dim. Part No.

Thickness L

Spring Latch 1.57 2.54 226023-1

.062 .100

Locking Latch 1.57 2.54 226060-1

.062 .100

Integral Die Insert for Tools:

RG/U Ferrule Hand Tool 69710-1 Part No.

Cable No. Die Pneu. 69365-2,

Hand Tool 69365-3

174 1-332056-0 91911-3 69690-X 51563-8

316, 188, 188A

179, 179A, 179B 1-332056-0 91911-4 69690-1 51563-8

187, 187A

161 1-332056-0 69656-5 — 51563-8

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

247

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

248

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Selection Chart for Twisted Pairs and Shielded Wire

Die Insert

for Tools:

Wire Size Hand Tool Contact Part Numbers

Integral Die PRO-CRIMPER 69710-1 Multimate Short Socket Ferrule

AWG [mm2]Hand Tool Pneu. Tool Pin Pin

69365-2,

69365-3*

30 0.05 69656-2 — 69690-2 226537-3 51563-3 51565-3 1-332057-0

(Twisted Pair, Solid)

28 0.08-0.09 — 91911-3 69690-226537-3 51563-3 51565-3 1-332057-0

(Twisted Pair, Solid)

28 69690-1

(Twisted Pair, Stranded; 0.08-0.09 — 91911-4 or 226537-3 51563-3 51565-3 1-332057-0

7 str., .005 [0.13] Dia.) 69690-2

(Twisted Pair,

Solid or Stranded; 0.12-0.15 — 91911-3 69690-2 226537-3 51563-3 51565-3 1-332057-0

7 str., .0063 [0.16] Dia.)

(Shielded, 0.75 [1.91] 0.12-0.15 69656-3 — 69690-3 226537-1 —51565-1 1-332057-0

Max. O.D.)

*Includes bench mount and foot control.

Extraction Tool 305183

Note: A ferrule is required for each pin and socket.

Subminiature Contacts

Material

Outer Shell —Brass per MIL-C-50

Center Conductor —Beryllium

copper per QQ-C-533 (Pin);

Brass per QQ-B-626 (Socket)

Inner Dielectric—Polypropylene,

nylon, or polymethylpentene, general

purpose

Retention Spring —Stainless steel

per QQ-S-766

Ferrule —Copper per QQ-C-576

Finish

Outer Shell and Socket

Center Conductor —0.00076

[.000030] gold over 0.00127 [.000050]

nickel

Pin Center Conductor —0.00076

[.000030] gold over

0.00254 [.000100] copper

Ferrule —Bright tin per MIL-T-10727

Ferrule

16.51 Max.

[.650] Socket

Ferrule

A= Multimate Pin 25.65 [1.010]

Short Pin 22.66 [.892]

Selection Chart for Coaxial Cable

Integral Die Insert for Tools: Contact Part Numbers

RG/U Cable Die PRO-CRIMPER Hand Tool 69710-1

Hand Tool Pneu. Tool 69365-2, Multimate Short Socket Ferrule

69365-3* Pin Pin

178, 178A, 178B 69656-2 69690-2 226537-2 —51565-2 1-332057-0

196, 196A

196 69656-9 — 226537-2 —51565-2 1-225088-1

(Double Braid)

174, 316 —91911-3 69690 -226537-1 —51565-1 1-332056-0

188, 188A

179, 179A, 179B

187, 187A — 911911-4 69690-1 226537-1 —51565-1 1-332056-0

Belden 9221

RD-316 69656-7 — 226537-1 —51565-1 1-225088-3

187 69656-8 — 226537-1 —51565-1 1-225088-1

(Double Braid)

161 69656-5 — 226537-1 —51565-1 1-332056-0

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.