Fibre-optic systems Lichtschranken Baureihe WL 27-2 Fibre-optic cables Proximity system Fibre-optic cables Through-beam system Fibre-optic systems: Bending light the easy way S Sensors which are to be used in fully automatic production processes must be compact and extremely powerful. However, many situations demand more complex solutions. For example if not enough space is available, or a reduction in weight is necessary. Also if the environment of the device is subject to severe vibrations, electromagnetic interference or excessive temperatures. Once again, SICK has the answer: fibre-optic systems. SICK offers an extensive range of both preassembled fibre-optic cables and cables which can be adapted and cut to length to meet your own specific needs. Cables are available with plastic or metal jacket, plug or screw connections, and a wide selection of different end sleeves. The different types of fibre-optic cables are distinguished by their jacket and the number, as well as arrangement, cross section and material of the optical fibres. Glass fibre-optic cables can be used in temperatures of up to 315 C. Fibre-optic cables with plastic fibres can usually be shortened to any length and their bending radii are smaller. 528 SENSICK CATALOGUE Assignment of systems to fibreoptic cable types: LL3-D: Standard proximity system (from page 530) - tip adapters as accessories, - plastic fibres and jackets, - in most cases can be cut to any length, - approx. 25 variants, each optimised for different physical loads and installation dimensions. LL3-T: Standard through-beam system (from page 532) - tip adapters as accessories, - plastic fibres and jackets, - in most cases can be cut to any length, - approx. 25 variants, each optimised for different physical loads and installation dimensions. LT: Proximity system (from page 552) - glass fibres in chromiumplated metal jackets. LM: Through-beam system (from page 552) - glass fibres in metal jackets and PVC coating. LBS: Proximity system (from page 548) - glass fibres in stainless steel jackets, - Ambient operating temperature -58 to +315 C. LIS: Through-beam system (from page 548) - glass fibres in stainless steel jackets, - Ambient operating temperature -58 to +315 C. LLUV: Proximity system (from page 555) - UV fibre-optic cable. Fibre-optic systems Which fibre-optic cable fits which sensor? WLL 160(T) WLL 160 with LL 3 fibre-optic cable, plastic manual sensitivity adjustment, pre-failure signalling output and test input, timer 0 to 100 ms, light-/dark-switching. WLL 160T with LL 3 fibre-optic cable, plastic teach-in sensitivity adjustment, via button on device or externally via control signal, switching frequency 830/s or 1,600/s, switch-selectable, timer. WLL 170T mark sensor with LL 3 fibre-optic cable, plastic teach-in sensitivity adjustment via button on device, green light LED sender, optional: anti-interference. WLL 12 with LL 3, LT, LM fibre-optic cable red, infrared or green light LED sender, complementary switching outputs, selectable via control cable, switching frequency: 1,300/s. WLL 24 Exi with LL 3 fibre-optic cable (l 2.2 mm) explosion protection E Ex ia IIC T6, switching outputs to NAMUR EN 50 277, terminal chamber or M 12 plug. WLL 170T with LL 3 fibre-optic cable, plastic teach-in sensitivity adjustment via button on device, large scanning ranges, red light LED sender, optional: anti-interference. LUT 3-820 with LLUV 8 fibre-optic cable UV light source, supplementary optical filter. LUT 1-4 with LLUV 5 fibre-optic cable UV light source with high-pressure mercury-vapour burner, supplementary optical filter. CSL WLL 260 WLL 170 high-speed with LL 3 fibre-optic cable, plastic high-speed 10,000/s, red light LED sender, timer and L.ON-/D.ON selector. WLL 170 analogue with LL 3 fibre-optic cable, plastic analogue output voltage 1 to 5 V, red light LED sender, variable gain. with LBS, LIS fibre-optic cable green light LED sender, switching frequency 10,000/s. LUT WLL 170(T) WLL 170 with LL 3 fibre-optic cable, plastic manual sensitivity adjustment, red light LED sender, large scanning ranges, timer and L.ON-/D.ON selector. KTL 5G-2 with LBS, LIS fibre-optic cable teach-in, adjustable colour selectivity. WLL 260 DC with LBS, LIS fibre-optic cable direct voltage supply, terminal chamber or M 12 plug, test input. WLL 260 UC with LBS, LIS fibre-optic cable universal voltage supply,relay switching output, terminal chamber. SENSICK CATALOGUE 529 LL 3 Plastic Fibre-optic cable Features Fibre-optic cable Proximity System Highly flexible Small bend radii Most fibre-optic cables can easily be cut to length using cutter (supplied) Operating temperature -- 40 ... +70 C, special designs up to 180 C Scanning distance SD 1) and minimum target diameter MD7) Selection table: sensors, fibre-optic cables, scanning ranges Proximity Systems LL 3 Fibre-optic cables Description LL 3 Fibre-optic cable WLL 160 Red light Bend radius (mm) WLL 160 T Red light (NORM/MAX) WLL 160 T Red light (FAST) in mm in combination with sensor type WLL 170 Red light WLL 170 Red light High-speed WLL 170 A Analogue WLL 170 T Red light WLL 170 T Green light Type Part no. SD MD SD MD SD MD SD MD SD MD 5V SD 3V SD MD SD MD SD MD Adaptor for WLL 12-2 AD-LL- WLL 12-2 Red light MD SD 2M2 WLL 12-2 WLL 24-2 Exi Infra-red light Red light MD SD SD MD Compact sleeve, M 4, long scanning range Super compact, sleeve 2.5 mm diameter Super compact, sleeve M 3 Long scanning range, M 6, coaxial fibre-optic cable 10 m length, M 6, coaxial fibre-optic cable 25 15 10 25 25 LL 3-DM 01 LL 3-DT 03 LL 3-DS 06 LL 3-DB 01 LL 3-DB 01-10 5 308 071 5 308 072 5 308 073 5 308 074 5 308 075 70 20 0.015 0.015 70 20 0.015 0.015 50 14 0.015 0.015 90 22 0.015 0.015 25 7 0.015 0.015 30 11 45 15 0.015 0.015 90 25 0.015 0.015 25 4 0.015 0.015 20 70 40 0.015 0.020 0.015 20 70 40 0.015 0.015 0.015 14 50 30 0.015 0.015 0.015 22 90 40 0.015 0.015 0.015 7 25 8 0.015 0.015 0.015 11 28 15 15 40 20 0.015 0.015 0.015 25 100 50 0.015 0.015 0.015 4 25 20 0.015 0.015 0.015 For front lenses, M 3 Thin, short sleeve, M 4, coaxial fibre-optic cable Highly flexible, M 6, long scanning range Highly flexible, small sleeve, M 3 Highly flexible, 3 mm diameter, thin sleeve 15 25 4 4 4 LL 3-DT 01 LL 3-DM 02 LL 3-DR 01 LL 3-DR 02 LL 3-DR 03 5 308 076 5 308 077 5 308 078 5 308 079 5 308 080 25 25 70 9 20 0.020 0.020 0.020 0.020 0.020 25/122) 25 70 9 20 0.015 0.015 0.015 0.015 0.015 18 18 50 6 14 0.015 0.015 0.015 0.015 0.015 30/122) 30 0.015 0.015 8/122) 8 0.015 0.015 15 15 20 20 0.015 35/122) 0.015 35 0.015 0.015 7/122) 7 0.015 0.015 75 8 22 0.015 0.015 0.015 25 0.015 25 35 0.015 0.015 7 10 0.015 85 14 25 0.015 0.015 0.015 20 4 3 4 4 25/10 3) 25/10 3) 15 LL 3-DR 044) LL 3-DR 06 LL 3-DB 02 LL 3-DM 03 LL 3-DT 02 5 308 081 5 308 082 5 308 083 5 308 084 5 308 085 9 20 70 20 5 0.020 0.020 0.020 0.020 0.020 9 20 70 20 5 0.015 0.015 0.015 0.015 0.015 6 14 50 14 3 0.015 0.015 0.015 0.015 0.015 8 22 90 22 5 0.015 0.015 0.015 0.015 0.015 4 25 6 0.015 0.015 0.015 7 30 11 10 40 15 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 3 25 4 14 25 100 25 6 Thin long tip, M 3, coaxial fibre-optic cable diameter 3.0 mm, thin tip, 0.82 mm diameter 90 offset, 5.0 mm diameter 90 offset, small sleeve, 3.0 mm diameter 90 offset, M 6 15 4 25 15 25 LL 3-DT 044) LL 3-DR 054) LL 3-DV 01 5 308 086 5 308 087 5 308 088 9 5 40 0.020 0.020 0.030 9 5 40 0.015 0.015 0.025 5 3 30 0.015 0.015 0.025 10 5 40 0.015 0.015 0.025 10 0.025 17 24 0.025 13 8 50 0.015 0.015 0.025 10 0.025 LL 3-DV 02 LL 3-DV 03 5 308 089 5 308 090 9 40 0.020 0.030 8 40 0.015 0.025 5 30 0.015 0.025 9 40 0.015 0.025 10 24 0.025 12 50 0.015 0.025 10 0.025 2M2 0.025 17 20 Temperature resistant to 180 C, M 6, long scanning range Temperature resistant to 100 C, M 6 Teflon sheath, resistant to chemicals, 6.0 mm diameter Level switch, clear liquid, 6.0 mm diameter Level switch, cloudy liquid, 6.0 mm diameter 30 25 40 50 50 LL 3-DH 015) LL 3-DH 026) LL 3-DY 01 LL 3-DF 01 LL 3-DF 02 5 308 091 5 308 092 5 308 093 5 308 094 5 308 095 100 55 0.020 0.020 100 55 0.015 0.015 70 50 0.015 0.015 110 0.015 40 0.015 45 65 0.015 135 0.015 25 0.015 2M2 50 0.015 22 30 0.015 0.015 0.020 0.015 75 60 5 0.020 0.015 0.020 18 45 yes yes 60 50 yes yes Highly flexible, 1.5 mm diameter, thin sleeve Highly flexible, M 4, compact sleeve Supple sleeve, M 6, long scanning ranges Supple sleeve, M 4 Thin long tip, M 3 1) For white scanned object, 90 % remission, minimum object diameter = size of light (aperture LL: approx. 65) fibre-optic cable not shortened 2) With scanning front lens for LL 3, see front lenses for LL 3 3) Bend radius of the supple end sleeve 4) Cannot be cut 5) Ambient operating temperature - 40 . . . + 180 C 6) Ambient operating temperature - 40 . . . + 100 C 7) Minimum object diameter: scanning range reduction! 530 SENSICK CATALOGUE yes yes 0.02 30 0.02 12 30 0.02 0.015 2M2 0.015 2M2 0.02 8 0.02 4 2M2 2M2 0.02 40 0.03 0.02 4 0.02 6 4 0.02 0.02 20 0.02 15 0.02 0.02 0.02 6 4 40 0.03 50 0.02 not available Adaptor for WLL 12-2 Type Part no. AD-LL 2M2 2 015 210 LL-l 2.2 mm SENSICK CATALOGUE 531 LL 3 Plastic fibre-optic cable Fibre-optic cable Through-beam systems Features Highly flexible Small bend radii Most fibre-optic cables can be easily cut to length using cutter (supplied) Operating temperature - 40 ... +70 C, special designs up to 180 C Scanning range SR 1) and minimum target diameter MD6) Selection table: sensors, fibre-optic cables, scanning ranges Through-beam systems LL 3 Fibre-optic cables WLL 160 Red light Type Part no. LL 3-TB 02 LL 3-TS 07 LL 3-TB 01 LL 3-TB 01-10 LL 3-TR 01 5 308 048 5 308 049 5 308 050 5 308 051 5 308 052 Highly flexible, M 3 4 Small sleeve, 1.5 mm diameter, highly flexible, length 1 m 4 Small sleeve, 1.5 mm diameter, highly flexible, length 2 m 4 Flexible end sleeve, M 4 25/103) Compact, M 3, end piece 1.0 mm diameter 15 LL 3-TR 02 LL 3-TR 03 LL 3-TR 03-2 LL 3-TB 03 LL 3-TT 01 5 308 053 5 308 054 5 308 055 5 308 056 5 308 057 90 offset, standard, 3 mm diameter 90 offset, compact, 2.5 mm diameter 90 offset, compact, M 3 90 offset, standard, 3 mm diameter 90 offset, long range 25 15 15 25 25 LL 3-TV 01 LL 3-TV 02 LL 3-TV 04 LL 3-TS 08 LL 3-TS 12 5 308 058 5 308 059 5 308 060 5 308 061 5 308 062 Fibre-optic cable cell Temperature-resistant, M 4 Temperature-resistant up to 180 C, M 4 Teflon sheath, 6.0 mm diameter, chemically resistant Teflon sheath, 6.0 mm diameter, chemically resistant 90 offset Small end sleeve, M 3, long range Small end sleeve M 3 Small end sleeve, 1.5 mm diameter 25 25 30 40 40 LL 3-TS 10 LL 3-TH 014) LL 3-TH 025) 5 308 063 5 308 064 5 308 065 LL 3-TY 01 LL 3-TY 02 5 308 066 5 308 067 25 15 15 LL 3-TM 01 LL 3-TM 02 LL 3-TM 03 5 308 068 5 308 069 5 308 070 Description Standard M 4 Standard, 3 mm diameter, long range Standard, M 4, long range Standard, M 4, length 10 m Highly flexible, M 4, long range 1) Fibre-optic cable not shortened 2) With scanning front lens for LL 3, see front lenses for LL 3 3) Bend radius of the supple end sleeve 4) Ambient operating temperature - 40 . . . + 180 C 5) Ambient operating temperature - 40 . . . + 100 C 6) Minimum object diameter: scanning range reduction! 532 SENSICK CATALOGUE LL 3 Fibre-optic cable Bend radius (mm) 25 35 25 25 4 SR MD 200/20002) 0.2/4.0 500 0.5 400/15002) 0.5/4.0 250/9002) 0.5/4.0 180/12002) 0.2/4.0 WLL 160 T Red light (NORM/MAX) SR MD 200/20002) 0.2/4.0 500 0.5 400/15002) 0.2/4.0 250/9002) 0.5/4.0 180/12002) 0.2/4.0 WLL 160 T Red light (FAST) SR MD 150/15002) 0.2/4.0 360 0.5 280/15002) 0.2/4.0 190/6602) 0.5/4.0 130/8502) 0.2/4.0 50 0.2 50 0.1 40 0.2 50 50 0.2 0.2 50 50 0.1 0.1 40 40 0.2 0.2 200 18 0.2 0.1 200 18 0.2 0.1 150 10 0.2 0.2 150 40 0.2 0.2 150 40 0.2 0.2 130 30 0.2 0.2 40 200 0.2 0.2 40 200 0.2 0.2 30 150 0.2 0.2 700 0.5 700 0.5 400 0.5 260 260 190 1.0 1.0 1.0 180/15002) 0.2/4.0 180/15002) 0.2/4.0 130/10502) 0.2/4.0 350 350 240 0.5 0.5 0.5 1000 1000 700 0.8 0.5 0.5 250 250 180 0.5 0.3 0.3 200 0.2 200 0.2 150 0.2 70 70 0.2 0.2 70 70 0.1 0.1 50 50 0.1 0.1 in mm in combination with sensor type WLL 170 Red light WLL 170 Red light High-speed WLL 170 A Analogue WLL 170 T Red light WLL 170 T Green light SR MD SR MD 5V SR 3V SR MD SR MD SR MD 280/25002) 460 80/5002) 130 95 160 160 80 80 135 230 230 110 110 0.2 0.5 0.5 0.5 0.3 580/25002) 300/12002) 270/25002) 0.2 0.5 0.5 0.5 0.3 75/6502) 140 130/4002) 75/2002) 60/4002) 0.2 0.5 0.5 0.5 0.3 350/32002) 580 460/20002) 250/10002) 230/10002) 0.2 0.5 0.5 0.5 0.3 140/6002) 120/5002) 60/5502) 0.2 0.5 0.5 0.5 0.3 60 60 60 280 18 0.1 0.1 0.1 0.2 0.1 15 15 15 80 0.1 0.1 0.1 0.2 35 35 35 125 8 0.1 0.1 0.1 0.2 0.1 80 80 80 330 23 0.1 0.1 0.1 0.2 0.1 15 15 15 75 0.1 0.1 0.1 0.2 25 25 25 90 6 160 50 50 200 800 0.2 0.1 0.1 0.2 0.5 30 15 15 65 340 0.2 0.1 0.1 0.2 0.5 80 23 23 80 550 110 33 33 110 800 0.2 0.1 0.1 0.2 0.5 230 60 60 250 1000 0.2 0.1 0.1 0.2 0.5 230 0.1 0.2 70 60/4002) 0.1 0.2 85 70 120 95 0.1 0.2 330 180/20002) 250/25002) 0.1 0.2 400 800 280 0.5 0.3 0.3 120 300 60 0.5 0.3 0.3 130 180 0.5 500 1800 380 280 80 80 0.2 0.1 0.1 80 20 20 0.2 0.1 0.1 95 27 27 135 38 38 0.2 0.1 0.1 350 100 100 Adaptor for WLL 12-2 AD-LL- WLL 12-2 Red Light WLL 12-2 Infra-red light WLL 24-2 Exi Red light SR MD SR MD SR MD 2M2 2M2 2M2 120 180 180 0.2 0.5 0.5 25 45 45 0.2 0.5 0.5 110 140 140 0.2 0.5 0.5 2M2 2M2 70 110 0.5 0.3 25 25 0.5 0.3 55 85 0.5 0.3 1M0 25 0.2 4 0.2 55 15 15 55 450 0.2 0.1 0.1 0.2 0.5 2M2 2M2 60 400 0.2 0.5 10 45 340 0.2 0.5 60 25/3002) 0.1 0.2 2M2 2M2 75 70 1.0 0.2 20 15 1.0 0.2 60 60 1.0 0.2 0.5 0.3 0.3 85 200 120 0.5 0.3 0.3 2M2 160 0.5 30 0.5 110 0.5 2M2 2M2 620 160 0.8 0.5 70 25 0.8 0.5 460 150 0.8 0.5 0.2 0.1 0.1 75 15 15 0.2 0.1 0.1 1M0 30 0.2 4 0.2 25 0.2 0.2 not available Adaptor for WLL 12-2 Type Part no. AD-LL 1MO 2 015 026 LL-l 1.0 mm AD-LL 2M2 2 015 210 2.2 mm SENSICK CATALOGUE 533 LL 3 Plastic fibre-optic cables Flow chart - selection of fibre-optic cables Proximity systems Coaxial structure for precise switching Fibre-optic cable length 10 m Standard, large scanning range M6 Standard, L = 10 m Compact head LL3-DB01 Super-compact head M3 M6 LL3-DB01-10 M4 LL3-DT01 LL3-DM02 Compact end sleeve, excellent scanning ranges Compact head, large scanning range Super-compact head o 2,5 o 2,5 Compact head, M3 M3 M4 LL3-DS06 LL3-DT03 LL3-DM01 Thin end sleeves, long, very thin and flexible end tips: ideal for small, inaccessible objects Standard, flexible end sleeve, large scanning range Compact head, flexible end sleeve Compact, thin end tip o 0.82 M6 M3 M4 LL3-DB02 Compact head, thin end tip LL3-DM03 o 0.82 Super-compact, flexible thin end tip o 0.82 o 3 M3 LL3-DT04 LL3-DT02 R4 LL3-DR05 Extremely flexible fibre-optic cable, bend radius R4, for dynamic mechanical systems Flexible, standard, large scanning range Flexible, compact head M6 R4 Flexible, small end sleeve M4 R4 LL3-DR01 M3 R4 LL3-DR06 LL3-DR02 Flexible, extremely short end sleeve Flexible, extremely short, extremely thin end sleeve o3 R4 o 1.5 LL3-DR03 R4 LL3-DR04 Integrated 90 offset, extremely short installation depths 90 offset 90 offset M6 90 offset, compact end sleeve o3 o 1,5 o5 LL3-DV03 LL3-DV01 LL3-DV02 Special applications: Level switches Chemicals High temperature Resistant up to 100 C Resistant up to 180 C extremely large scanning range M6 Teflon sheath: resistant to chemicals o6 LL3-DH01 LL3-DY01 Accessories: lenses at the front with focused optics LL3-DT01 534 SENSICK CATALOGUE Level switch: cloudy liquids, resistant to chemicals M6 LL3-DH02 Basic fibre-optic cable for scanners with front lenses Level switch: Clear liquids, resistant to chemicals Small spot, ideal for extremely small parts, high precision Small spot, ideal for marks, colour recognition, small parts f = 12 mm f = 6 mm LL3-DA02 LL3-DA01 LL3-DF01 LL3-DF02 LL 3 Fibre-optic cables Flow chart - selection of fibre-optic cables Through-beam systems Standard Fibre-optic cable length 10 m Standard Standard, long range o3 M4 LL3-TB02 Standard, long range LL3-TS07 Standard, L = 10 m M4 M4 LL3-TB01 LL3-TB01-10 Flexible end sleeve, ideal for inaccessible objects M4 LL3-TB03 Thin, short end sleeves Compact end sleeve o2 Extremely thin, extremely short end sleeve o 1.5 M3 Compact, long range M3 LL3-TM03 LL3-TM02 Compact head, thin end tip o3 o 0.5 LL3-TT01 LL3-TM01 Highly flexible fibre-optic cable, extremely small bend radius R4, for dynamic mechanical systems Flexible, standard, long range M4 R4 Flexible, extremely small end sleeve M3 R4 LL3-TR01 Flexible, extremely thin end sleeve o 1.5 R4 LL3-TR02 LL3-TR03 LL3-TR03-2 90, very small sleeve o 2.5 o1 R4 LL3-TV02 Integrated 90offset, extremely short installation depths 90 offset 90 offset o3 LL3-TS08 90, very small sleeve o3 R4 LL3-TV01 Special applications: 90, very small sleeve o 2.5 o1 LL3-TV02 90, long range, easy assembly M3 LL3-TV04 LL3-TS12 Line of fibre-optic cables Chemicals High temperature Resistant up to 100 C M4 Resistant up to 180 C, large scanning ranges M4 LL3-TH01 Teflon sheath: resistant to o6 chemicals LL3-TH02 LL3-TY01 Teflon sheath, 90 offset o6 LL3-TY02 Line of fibre-optic cables LL3-TS10 Accessories: front lenses, long ranges (max. 3200 mm), 90 offset Suitable LL 3 fibre-optic cables LL3-TB02 LL3-TB01 LL3-TB01-10 LL3-TR01 LL3-TH01 Long ranges 90 offset, extremely short installed depth, long range LL3-TA01 LL3-TA02 SENSICK CATALOGUE 535 LL 3 Plastic fibre-optic cables, proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems 12 3 WLL 170: LED red WLL 170T: LED red 10 2000 o 2.5 1 o 1.0x2 o 2.5 o 0.5x2 10 2000 1 Operating level 0 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 10 40 80 120 -10 160 200 Distance X (mm) -20 3 o 0.45 mm 1.5 0 7.5 15 22.5 Distance X (mm) -1.5 -3 WLL 170T: LED red -40 -4.5 X 3 o 0.015 mm 6 4 2 0 10 20 30 -2 40 50 Distance X (mm) -4 2 -3 X 10 40 80 120 -10 160 200 Distance X (mm) -20 o 0.08 mm 3 o 0.45 mm 1.5 0 LL3-DT03 LL3-DM01 7.5 15 22.5 Distance X (mm) -1.5 -40 -4.5 X 3 o 0.015 mm 6 4 2 0 10 20 30 -2 40 50 Distance X (mm) -4 2 -1 WLL 170: LED red -3 X o 1.0x2 LL3-DS06 Order information Type Part no. LL 3-DB01 5 308 074 WLL 170: LED red WLL 170T: LED red 10 o 0.26x16 Receiver o 1 Sender o 2.5 10 o 5.5 o 2.5 12 2000 Operating level 0 10 20 Scanning distance (mm) 30 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 5 M6x0.75 15 1) 2) o 2.2x2 LL3-DB01 100 1 1) Sender 2) Receiver 40 50 Distance X (mm) -4 o 0.08 mm 1 o 0.45 mm 0 5 10 15 Distance X (mm) -1 -2 -3 -8 X X 20 10 0 80 40 120 -10 160 200 Distance X (mm) -20 X 40 50 Distance X (mm) -4 o 0.08 mm 1 o 0.45 mm 0 5 -1 -2 WLL 170: LED red -8 -3 X -4 SENSICK CATALOGUE Y Y -6 536 10 15 Distance X (mm) X WLL 170: LED red fine copper wire 20 10 0 o 0.025 mm 80 40 -10 120 160 200 Distance X (mm) -20 LL3-DB01 o 0.08 mm 3 o 0.45 mm 1.5 0 22.5 15 Distance X (mm) 7.5 -1.5 -3 -30 -40 X WLL 170: LED red Y 30 2 30 Operating position Y (mm) 20 o 0.025 mm 4.5 Y 10 -2 WLL 170T: LED red fine copper wire o 0.015 mm 40 Operating position Y (mm) o 0.015 mm Operating position Y (mm) Operating position Y (mm) 0 LL3-DB01 LL3-DS06 3 2 X o 6 4 4 22.5 15 Distance X (mm) 7.5 -1.5 -6 LL3-DS06 6 o 0.45 mm 0 -4.5 -4 8 3 -3 WLL 170T: LED red -40 fine copper wire LL3-DB01 o 0.08 mm 1.5 -30 WLL 170T: LED red Y WLL 170T: LED red Y Y -6 30 Y 30 2 o 0.025 mm 4.5 Operating position Y (mm) 20 o 0.025 mm o 0.015 mm 40 Operating position Y (mm) 10 50 100 Scanning distance (mm) 6 o 0.015 mm -2 Operating level 0 LL3-DB01 LL3-DS06 3 Operating position Y (mm) Operating position Y (mm) 0 WLL 170: LED red WLL 170T: LED red 10 2000 4 LL3-DS06 2 WLL 170: LED red fine copper wire Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 8 4 X 5 1 6 10 15 Distance X (mm) -4 Operating margin (%) M3x0.5 5 -2 fine copper wire 100 Operating margin (%) o 0.5x2 o 0.45 mm 0 -6 Order information Type Part no. LL 3-DS06 5 308 073 o 0.08 mm 1 -8 X o 0.025 mm -6 WLL 170: LED red Y Y WLL 170: LED red LL3-DT03 8 -3 -30 fine copper wire 4 o 0.025 mm o 0.015 mm Y 0 WLL 170T: LED red X -4 Operating position Y (mm) 20 10 15 Distance X (mm) -2 fine copper wire Operating position Y (mm) 30 Operating position Y (mm) Operating position Y (mm) 4.5 5 -1 WLL 170T: LED red 6 LL3-DM01 o 0.45 mm 0 -6 40 o 0.08 mm 1 -8 X o 0.025 mm -6 WLL 170T: LED red Y Y -30 LL3-DT03 8 Y 0 30 LL3-DT03 LL3-DM01 o 0.08 mm Operating position Y (mm) 20 10 20 Scanning distance (mm) 4 o 0.025 mm o 0.015 mm Operating position Y (mm) 30 Operating position Y (mm) Operating position Y (mm) 4.5 Operating level 0 50 100 Scanning distance (mm) 6 LL3-DM01 40 WLL 170: LED red WLL 170T: LED red 10 Y o 1.3x2 LL3-DT03 100 Y M4 Order information Type Part no. LL 3-DT03 5 308 072 Operating margin (%) o 1.0x2 LL3-DM01 100 Operating margin (%) Order information Type Part no. LL 3-DM01 5 308 071 -4.5 -6 X o WLL 170: LED red fine copper wire LL 3 Proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems WLL 170T: LED red o 0.25x9 Receiver o 0.5 Sender 10 13 18 10000 5 Sender Receiver Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating level 0 50 Scanning distance (mm) 4 LL3-DB01-10 20 40 60 80 100 Distance X (mm) -2 -4 2 o 0.45 mm 1 0 5 10 15 Distance X (mm) -1 X o LL3-DT01 3 4 2 0 10 20 30 -2 40 50 Distance X (mm) -4 0 WLL 170T: LED red -3 -4 2 o 0.45 mm 1 0 5 LL3-DT01 4 2 0 -3 X o X 10 20 -2 30 40 50 Distance X (mm) -4 0 3 12 o 1.3x2 fine copper wire WLL 170: LED red -3 X Order information Type Part no. LL 3-DR01 5 308 078 WLL 170: LED red WLL 170T: LED red 10 M6x0.75 2000 1 Operating level 0 10 20 30 40 50 Scanning distance (mm) o 0.265x16 o 0.265x16 o 2.2x2 5,2 12 LL3-DR01 2000 1 30 40 50 Distance X (mm) -4 LL3-DR01 o 0.08 mm 2 o 0.45 mm 1 0 5 10 15 Distance X (mm) -1 40 -2 -3 -8 X X 30 20 10 0 40 80 120 -10 160 200 Distance X (mm) -20 fine copper wire 20 30 40 50 Distance X (mm) -4 o 0.08 mm 2 o 0.45 mm 1 0 5 -1 LL3-DR01 10 15 Distance X (mm) 40 4.5 30 20 10 0 40 80 -10 120 160 200 Distance X (mm) -20 -8 X -4 X WLL 170: LED red fine copper wire o 0.025 mm o 0.015 mm LL3-DR01 o 0.08 mm 3 o 0.45 mm 1.5 0 7.5 15 22.5 Distance X (mm) -1.5 -30 Y Y -3 fine copper wire -3 -2 -6 WLL 170: LED red WLL 170T: LED red X Operating position Y (mm) 10 15 22.5 Distance X (mm) 6 o 0.025 mm o 0.015 mm Operating position Y (mm) 0 -2 7.5 -1.5 X LL3-DM02 Operating position Y (mm) 2 Y Operating position Y (mm) 4 o 0.45 mm 0 -4.5 4 6 3 1.5 -6 LL3-DM02 3 LL3-DR01 o 0.08 mm -3 WLL 170T: LED red -40 -4 8 o 0.025 mm o 0.015 mm -30 WLL 170T: LED red Y WLL 170T: LED red Y Y -6 4.5 Operating position Y (mm) 20 50 100 Scanning distance (mm) 6 o 0.025 mm o 0.015 mm Operating position Y (mm) 10 Operating position Y (mm) Operating position Y (mm) 0 Operating level 0 LL3-DM02 3 -2 WLL 170: LED red WLL 170T: LED red 10 4 LL3-DM02 2 fine copper wire Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 8 4 WLL 170: LED red X 100 60 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 6 10 15 Distance X (mm) -4 LL3-DM02 o 0.5 Sender o 0.25x9 Receiver 5 -1 -8 Operating margin (%) o 8.5 o 0.45 mm 1 -6 WLL 170: LED red 100 Operating margin (%) M4x0.7 o 0.08 mm 2 -4 Order information Type Part no. LL 3-DM02 5 308 077 o 0.025 mm o 0.015 mm -2 -2 Y Y -8 10 15 Distance X (mm) -1 -6 WLL 170: LED red fine copper wire 3 6 Operating position Y (mm) 60 80 100 Distance X (mm) WLL 170T: LED red X LL3-DT01 8 Y 40 10 15 Distance X (mm) 4 o 0.008 mm o 0.025 mm Operating position Y (mm) 20 5 -1 -4 LL3-DB01-10 Operating position Y (mm) Operating position Y (mm) 0 -2 o 0.45 mm 1 X o 0.015 mm 2 o 0.08 mm 2 -8 3 4 o 0.025 mm o 0.015 mm 6 -6 fine copper wire 4 6 60 4 -4 LL3-DB01-10 20 30 40 50 Scanning distance (mm) -2 -3 X 8 10 LL3-DT01 WLL 170T: LED red Y Y -8 Operating level 0 -2 -6 WLL 170T: LED red 1 8 Y 2 0 Sender Receiver Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) 4 2000 o 0.008 mm o 0.025 mm LL3-DB01-10 o 0.015 mm 6 1) 5 2) 3 Operating position Y (mm) Operating position Y (mm) 8 WLL 170: LED red WLL 170T: LED red 10 1) 1 2) o 1.3x2 2) Y 1) M3x0.5 Operating margin (%) o 2.2x2 Y 15 2) Y 5 1) LL3-DT01 100 -40 WLL 170: LED red Y 10 M6x0.75 Order information Type Part no. LL 3-DT01 5 308 076 Operating position Y (mm) o 0.26x16 Receiver o 1 Sender o 2.5 LL3-DB01-10 100 Operating margin (%) Order information Type Part no. LL 3-DB01-10 5 308 075 -4.5 X X WLL 170: LED red fine copper wire -6 SENSICK CATALOGUE 537 LL 3 Plastic fibre-optic cables, proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems o3 1000 o 1.0x2 2000 10 o 0.25x2 Sender o 0.25x2 Receiver 1 1 0 10 20 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 12 16 20 Distance X (mm) -2 0 5 7.5 Distance X (mm) 2.5 -0.5 4 2 0 10 20 30 -2 40 50 Distance X (mm) -4 X X -4 fine copper wire -1.5 X 2 8 12 16 20 Distance X (mm) o 0.45 mm 0.5 0 5 7.5 Distance X (mm) 2.5 -0.5 -2 -1 -1.5 -4 X 4 2 0 10 20 30 -2 40 50 Distance X (mm) o3 15 o 1x2 15 900 o 2.2x2 -4 fine copper wire Order information Type Part no. LL 3-DR06 5 308 082 WLL 170: LED red WLL 170T: LED red M4x0.7 M2.6x0.45 o 0.25x4 o 0.25x4 1 -1.5 10 20 Scanning distance (mm) 3 o 1x2 3 12 8 12 16 20 Distance X (mm) -2 o 0.015 mm o 0.08 mm o 0.45 mm 0 2.5 5 7.5 Distance X (mm) 2 0 10 20 30 -2 40 50 Distance X (mm) -4 WLL 170T: LED red -8 fine copper wire 12 16 20 Distance X (mm) o 0.015 mm o 0.45 mm 0.5 0 2.5 -0.5 -2 WLL 170: LED red X SENSICK CATALOGUE -1.5 -2 Y Y 538 5 7.5 Distance X (mm) -1 -3 -4 o 0.08 mm X WLL 170T: LED red fine copper wire X WLL 170: LED red fine copper wire 6 4 2 0 10 20 -2 30 40 50 Distance X (mm) o 0.025 mm LL3-DR06 1.5 Operating position Y (mm) 8 5 7.5 Distance X (mm) 2 LL3-DR06 -4 o 0.08 mm o 0.015 mm 1 o 0.45 mm 0.5 0 2.5 -0.5 5 7.5 Distance X (mm) -1 -6 Y 4 1 2.5 -2 8 Operating position Y (mm) 0 -1 Operating position Y (mm) Operating position Y (mm) 1 o 0.45 mm 0 --1.5 X LL3-DR04 o 0.025 mm 1.5 2 1 0.5 -0.5 2 LL3-DR04 3 o 0.08 mm -1 Y Y 4 -2 4 30 o 0.015 mm -6 WLL 170T: LED red Y X 1.5 6 o 0.025 mm LL3-DR06 LL3-DR06 8 -1 X 10 20 Scanning distance (mm) 2 -3 -4 Operating level Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 0.5 -1.5 WLL 170: LED red WLL 170T: LED red 10 0 LL3-DR04 o 0.025 mm -0.5 WLL 170T: LED red WLL 170: LED red fine copper wire 2000 Operating position Y (mm) 4 X 1 Operating position Y (mm) 0 -1 Operating position Y (mm) Operating position Y (mm) 1 1 5 7.5 Distance X (mm) LL3-DR06 2 1.5 2 2.5 100 Operating level LL3-DR04 3 o 0.45 mm 0 X 25 100 4 1 0.5 -2 10 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids o 0.08 mm -1 WLL 170: LED red -8 LL3-DR04 0 o 0.025 mm o 0.015 mm -0.5 Operating margin (%) o 1.2 WLL 170T: LED red fine copper wire -6 WLL 170: LED red 100 Operating margin (%) o 1.5 X LL3-DR03 -2 Order information Type Part no. LL 3-DR04 5 308 081 o 0.25x2 o 0.25x2 X 6 Y WLL 170: LED red Y Y -3 o 1.5 o 0.08 mm 1.5 Operating position Y (mm) 4 1 o 0.015 mm 8 Operating position Y (mm) 0 -1 Operating position Y (mm) Operating position Y (mm) 1 5 7.5 Distance X (mm) 2 LL3-DR03 LL3-DR02 o 0.025 mm 1.5 2 2.5 -2 LL3-DR02 3 0 -1 WLL 170T: LED red -8 -2 4 o 0.45 mm -6 WLL 170T: LED red Y -1.5 Y Y WLL 170T: LED red 1 0.5 -0.5 -1 -3 o 0.08 mm o 0.015 mm Y 8 o 0.45 mm Operating position Y (mm) 4 o 0.08 mm 0.5 1.5 6 o 0.025 mm LL3-DR03 8 Operating position Y (mm) 0 -1 Operating position Y (mm) Operating position Y (mm) 1 o 0.015 mm LL3-DR03 LL3-DR02 o 0.025 mm 1.5 1 30 2 2 LL3-DR02 2 10 20 Scanning distance (mm) Y Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 3 Operating level Operating level 0 4 WLL 170: LED red WLL 170T: LED red 10 Y 13 o 0.25x2 o 0.25x2 WLL 170: LED red WLL 170T: LED red 10 LL3-DR03 100 -8 WLL 170: LED red -1.5 X -2 Y o 1x2 Order information Type Part no. LL 3-DR03 5 308 080 Operating margin (%) M3x0.5 LL3-DR02 100 Operating margin (%) Order information Type Part no. LL 3-DR02 5 308 079 X WLL 170: LED red fine copper wire LL 3 Proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems WLL 170: LED red WLL 170T: LED red 10 M4x0.7 o 1x2 o 1.5 o 2.5 1) 90 5 15 2000 2) 1 Operating level 50 100 Scanning distance (mm) 0 1) Flexible end sleeve, do not bend in this region (10 mm), bend radius R10 2) Sender (marked in blue) 3) Receiver 90 o 0.5x1 o 0.5x1 1) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 5 12 WLL 170: LED red WLL 170T: LED red 10 2000 1 1) Flexible end sleeve, do not bend in this region (10 mm), bend radius R10 10 80 40 120 -10 160 200 Distance X (mm) -20 o 0.45 mm 0 7.5 15 22.5 Distance X (mm) -1.5 -3 X 0 10 20 40 50 Distance X (mm) 30 -2 -4 2 X o Y WLL 170T: LED red -3 -8 fine copper wire X 80 40 120 160 200 Distance X (mm) -20 3 o 0.45 mm 1.5 0 22.5 15 Distance X (mm) -1.5 -3 -40 -4.5 X 4 2 0 10 20 40 50 Distance X (mm) 30 -2 -4 o 0.82 0 o 1.0x2 fine copper wire WLL 170: LED red -3 X Order information Type Part no. LL 3-DT04 5 308 086 WLL 170: LED red WLL 170T: LED red 10 M3x0.5 o 0,82 10 5 o 0.125x9 o 0.25 2000 1 o3 15 1) Operating level o 1.0x2 o 2.2x2 LL3-DT04 15 1 4 8 12 -1 16 20 Distance X (mm) 1 o 0.015 mm o 0.08 mm o 0.45 mm 0.5 0 1.5 3 4.5 Distance X (mm) -0.5 -2 LL3-DT04 4 -1 X X 2 1 0 4 8 12 -1 16 20 Distance X (mm) -2 -1.5 X 2 16 20 Distance X (mm) -2 o 0.08 mm o 0.45 mm 0.5 0 1.5 3 4.5 Distance X (mm) -0.5 -1 Y Y -1.5 X -2 3 2 1 0 4 8 -1 12 16 20 Distance X (mm) 1 o 0.08 mm o 0.45 mm 0.5 0 2.5 -0.5 -2 LL3-DT04 o 0.025 mm o 0.015 mm 5 7.5 Distance X (mm) -1 -3 WLL 170: LED red WLL 170T: LED red fine copper wire 1.5 Operating position Y (mm) 12 o 0.015 mm 4 WLL 170: LED red fine copper wire -3 Y 8 5 7.5 Distance X (mm) 2 o 0.025 mm Operating position Y (mm) 4 -1 1 X LL3-DT04 LL3-DT02 Operating position Y (mm) 1 2.5 -2 1.5 2 0 -1 WLL 170T: LED red -4 fine copper wire LL3-DT02 3 o 0.45 mm 0.5 -3 -2 4 1 o 0.08 mm o 0.015 mm -0.5 Y -1.5 -4 WLL 170T: LED red Y Y WLL 170T: LED red 3 LL3-DT04 o 0.025 mm 1.5 Operating position Y (mm) 1 10 20 Scanning distance (mm) 2 o 0.025 mm Operating position Y (mm) 2 Operating position Y (mm) Operating position Y (mm) 3 Operating level Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass LL3-DT02 1.5 -3 Operating position Y (mm) WLL 170: LED red WLL 170T: LED red 10 500 End sleeve cannot be bent 2 LL3-DT02 4 X WLL 170: LED red fine copper wire 100 0 5 10 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids -4 X 1) 15 0 0 10 15 Distance X (mm) -4 LL3-DT02 End sleeve cannot be bent 0 5 -2 1) 2.4 1) o3 o 0.45 mm -1 Operating margin (%) M3x0.5 o 0.25x1 o 0.08 mm 1 -8 100 Operating margin (%) o 0.25x1 o 0.025 mm 2 -6 Order information Type Part no. LL 3-DT02 5 308 085 o 0.015 mm -6 WLL 170: LED red X o 3 6 Y WLL 170: LED red Y Y -30 LL3-DM03 8 Operating position Y (mm) 0 -10 LL3-DM03 LL3-DB02 o 0.08 mm Operating position Y (mm) 10 WLL 170T: LED red fine copper wire 4 o 0.025 mm o 0.015 mm Operating position Y (mm) Operating position Y (mm) 20 X -4 4.5 30 10 15 Distance X (mm) 5 -1 6 LL3-DB02 o 0.45 mm 0 -6 40 o 0.08 mm 1 -6 WLL 170T: LED red Y Y -40 -4.5 2 o 0.025 mm -2 -30 WLL 170T: LED red 4 o 0.015 mm Y 0 3 1.5 3 6 Operating position Y (mm) 20 LL3-DM03 8 o 0.08 mm Operating position Y (mm) 30 LL3-DM03 LL3-DB02 4.5 Operating position Y (mm) Operating position Y (mm) 4 o 0.025 mm o 0.015 mm Operating level 10 20 30 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 6 LL3-DB02 40 0 3 -4 WLL 170: LED red -1.5 X Y 10 5 LL3-DM03 100 Y 3) Order information Type Part no. LL 3-DM03 5 308 084 Y M4x0.7 M6x0.75 o 2.2x2 Operating margin (%) o 0.26x16 Receiver o 1 Sender o 2,5 LL3-DB02 100 Operating margin (%) Order information Type Part no. LL 3-DB02 5 308 083 X WLL 170: LED red fine copper wire -2 SENSICK CATALOGUE 539 LL 3 Plastic fibre-optic cables, proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems 4.88 25 1 20 5 10 Scanning distance (mm) Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass 15 Operating margin (%) 2000 2 4 LL3-DR05 8 12 -1 16 20 Distance X (mm) 0 3 4.5 Distance X (mm) -0.5 -2 -1 -1.5 X X 2 20 10 30 -2 40 50 Distance X (mm) -4 -8 fine copper wire -3 X -1 16 20 Distance X (mm) 0 -1 -3 -1.5 X X 2 o3 o1 1.5 40 50 Distance X (mm) -4 fine copper wire LL3-DV02 WLL 170: LED red WLL 170T: LED red 10 X 2.5 2 M6x0.75 LL3-DV03 o 2.2x2 2 20 2000 1 12 -2 16 20 Distance X (mm) 0 2.5 5 7.5 Distance X (mm) -0.5 -4 3 Y o 0.45 mm 0.5 6 X 4 2 0 40 20 60 -2 80 100 Distance X (mm) -4 -1 Y -8 -1.5 X X -8 fine copper wire -3 X 8 -2 12 16 20 Distance X (mm) 0 2.5 5 7.5 Distance X (mm) 6 X 4 2 0 20 40 -2 60 80 100 Distance X (mm) -4 -1 -8 -1.5 X -2 540 SENSICK CATALOGUE Y WLL 170: LED red X WLL 170: LED red fine copper wire LL3-DV03 o 0.45 mm 2 1 0 5 -1 10 15 Distance X (mm) -2 -6 Y Y -6 o 0.08 mm 3 Y o 0.45 mm 0.5 -0.5 -4 10 15 Distance X (mm) fine copper wire o 0.025 mm LL3-DV03 8 Operating position Y (mm) 4 1 o 0.025 mm o 0.08 mm o 0.015 mm Operating position Y (mm) 0 Operating position Y (mm) 2 5 4 LL3-DV02 Y Operating position Y (mm) X 4 0 -1 X 2 6 1 -4 LL3-DV02 1.5 2 WLL 170T: LED red WLL 170T: LED red -2 8 LL3-DV03 o 0.45 mm -2 -6 WLL 170T: LED red Y WLL 170T: LED red Y -6 o 0.08 mm o 0.025 mm LL3-DV03 8 Operating position Y (mm) 8 1 o 0.025 mm o 0.08 mm o 0.015 mm Operating position Y (mm) 4 Operating position Y (mm) Y Operating position Y (mm) 4 LL3-DV02 1.5 Operating level 50 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 2 0 WLL 170: LED red WLL 170T: LED red 10 0 10 20 Scanning distance (mm) LL3-DV02 X fine copper wire o1 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 2 10 15 Distance X (mm) 100 Operating level 0 4 5 WLL 170: LED red -3 Order information Type Part no. LL 3-DV03 5 308 090 5 6 0 -1 -4 1 8 1 X 2000 15 2 -2 WLL 170: LED red o 2.7 10 30 -2 -8 100 Operating margin (%) o 1.5 20 10 -2 Order information Type Part no. LL 3-DV02 5 308 089 o 0.5x2 X 4 0 LL3-DV01 o 0.45 mm -6 WLL 170: LED red Y WLL 170: LED red Y -4 3 4.5 Distance X (mm) o 0.08 mm o 0.025 mm Y 1.5 -0.5 -2 fine copper wire 3 Operating position Y (mm) 12 o 0.45 mm 0.5 6 Operating margin (%) 8 o 0.08 mm Y 4 o 0.025 mm o 0.015 mm LL3-DV01 8 Operating position Y (mm) 0 1 10 15 Distance X (mm) 4 LL3-DR05 Operating position Y (mm) Operating position Y (mm) 1 5 WLL 170T: LED red WLL 170T: LED red 2 1.5 2 0 -1 -4 LL3-DR05 3 1 X -2 4 2 -6 WLL 170T: LED red Y Y WLL 170T: LED red X 4 0 LL3-DV01 o 0.45 mm -2 -3 -4 Y 1.5 o 0.08 mm o 0.025 mm 3 Y 4 o 0.45 mm 0.5 6 Operating position Y (mm) 0 1 o 0.08 mm Y 1 o 0.025 mm o 0.015 mm LL3-DV01 8 Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) 2 50 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 1.5 3 Operating level 0 LL3-DR05 4 WLL 170: LED red WLL 170T: LED red 10 1 Operating level 0 o 2.2x2 o5 Y 75 o 2.7 Y 15 500 WLL 170: LED red WLL 170T: LED red 10 LL3-DV01 100 -8 WLL 170: LED red WLL 170: LED red -3 X Y 15 o 0.25 o 0.25 o 2.2x2 1.5 5 o 1.2x2 o3 Order information Type Part no. LL 3-DV01 5 308 088 2 o 0.82 o 3 LL3-DR05 100 Operating margin (%) Order information Type Part no. LL 3-DR05 5 308 087 X -4 fine copper wire LL 3 Proximity systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - proximity systems o 2.2x2 WLL 170: LED red WLL 170T: LED red 10 o 1x2 o 2.5 10 15 19 5 M6x0.75 15 o 2.2 2000 5 2000 1 1 Operating level 0 50 100 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 10 40 80 120 -10 160 200 Distance X (mm) -20 6 o 0.025 mm o 0.015 mm LL3-DH02 LL3-DH01 o 0.08 mm 3 o 0.45 mm 1.5 0 7.5 15 22.5 Distance X (mm) -1.5 -3 -4.5 -40 20 10 0 80 40 120 -10 160 200 Distance X (mm) -20 10 0 40 120 80 -10 160 200 Distance X (mm) -20 3 o 0.45 mm 1.5 0 7.5 15 22.5 Distance X (mm) -1.5 LL3-DH02 LL3-DH01 o 0.08 mm 4.5 30 20 10 0 40 80 120 -10 160 200 Distance X (mm) -20 Y Y Y -4.5 Operating margin (%) WLL 170: LED red WLL 170T: LED red 10 1 o 5.5 o6 1) 2) For transparent liquids For cloudy liquids 16 2000 100 60i 1 1.7 Material: Core: PMMA, Sheath: Teflon Sleeve: Teflon 4 LL3-DY01 o 0.08 mm o 0.025 mm LL3-DY01 3 o 0.015 mm 6 4 2 20 40 60 -2 80 100 Distance X (mm) -4 Operating position Y (mm) Operating position Y (mm) 8 50 Scanning distance (mm) 1.6 8 2 o 0.45 mm 1 0 5 10 15 Distance X (mm) -1 -2 Y WLL 170T: LED red -3 X WLL 170T: LED red Y -6 -8 WLL 170: LED red fine copper wire 8 3 Operating level 0 Material: Core: PMMA, Sheath: Teflon Sleeve: Teflon 0 Order information Type Part no. LL 3-DF01 5 308 094 1) LL 3-DF02 5 308 095 2) o 2.2x2 2100 22.5 15 Distance X (mm) o6 LL3-DY01 2000 7.5 -6 100 16 0 -1.5 X o 1.8 o 2.2 o 0.45 mm X fine copper wire o 1.4 o6 3 1.5 -3 WLL 170: LED red -6 Order information Type Part no. LL 3-DY01 5 308 093 LL3-DH02 o 0.08 mm -30 WLL 170: LED red -40 X X o 0.025 mm o 0.015 mm 40 -3 -4.5 -40 fine copper wire 6 o 0.025 mm o 0.015 mm -30 WLL 170: LED red 22.5 15 Distance X (mm) WLL 170T: LED red X Operating position Y (mm) 20 7.5 -1.5 -6 Operating position Y (mm) 30 Operating position Y (mm) Operating position Y (mm) 4.5 o 0.45 mm 0 X fine copper wire 6 LL3-DH01 3 1.5 -4.5 -6 40 o 0.08 mm -3 WLL 170T: LED red -40 X X 30 -30 WLL 170T: LED red LL3-DH02 4.5 Y WLL 170T: LED red Y Y -30 o 0.025 mm o 0.015 mm 40 Operating position Y (mm) 20 50 100 Scanning distance (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) 30 Operating position Y (mm) Operating position Y (mm) 4.5 Operating level 0 150 6 LL3-DH01 40 0 WLL 170: LED red WLL 170T: LED red 10 Y 3 o 1.5 M6x0.75 LL3-DH02 100 Y o 4.9 Order information Type Part no. LL 3-DH02 5 308 092 Operating margin (%) o 1.5x2 LL3-DH01 100 Operating margin (%) Order information Type Part no. LL 3-DH01 5 308 091 X fine copper wire -4 4 LL3-DY01 2 20 40 -2 60 80 100 Distance X (mm) -4 Operating position Y (mm) 4 2 o 0.45 mm 1 0 5 -1 -8 10 15 Distance X (mm) -2 WLL 170: LED red -3 X Y -6 Y Operating position Y (mm) 3 6 0 o 0.08 mm o 0.025 mm LL3-DY01 8 X WLL 170: LED red fine copper wire -4 SENSICK CATALOGUE 541 LL 3 Plastic fibre-optic cables, through-beam systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - through-beam systems 1 2000 Operating level 0 LL3-TB02 40 120 240 360 -40 480 600 Distance X (mm) -80 -120 Y WLL 170T: LED red Order information Type Part no. LL 3-TB01 5 308 050 o 1.5 7 40 120 M2.6x0.45 3 M4 o 2.2 12 240 360 -40 480 600 Distance X (mm) 160 80 0 -160 WLL 170: LED red LL3-TB01 100 360 480 600 Distance X (mm) Operating margin (%) 160 80 0 120 240 360 -80 480 600 Distance X (mm) -160 -320 WLL 170T: LED red Order information Type Part no. LL 3-TB01-10 5 308 051 o 1.5 7 2000 LL3-TS07 -240 X WLL 170: LED red WLL 170T: LED red 10 M2.6x0.45 3 M4 o 2.2 12 X -320 WLL 170: LED red LL3-TB01-10 100 WLL 170T: LED red 10 10000 3 120 240 360 -80 480 600 Distance X (mm) -160 80 0 120 240 360 -80 480 600 Distance X (mm) -160 -240 Y -320 WLL 170T: LED red Order information Type Part no. LL 3-TR01 5 308 052 o 0.26x16 7 M2.6x0.45 3 M4 12 o 2.2 -320 120 80 40 0 120 WLL 170: LED red LL3-TR01 100 10 -40 240 360 480 600 Distance X (mm) -80 -160 542 X 0 SENSICK CATALOGUE 120 -40 240 360 480 600 Distance X (mm) -80 -120 WLL 170T: LED red Y -120 40 -160 X 16 8 40 -8 80 120 160 200 Distance X (mm) -16 -32 X 480 600 Distance X (mm) X WLL 170: LED red LL3-TR02 WLL 170: LED red WLL 170T: LED red 10 Operating level 0 LL3-TR02 24 0 360 -80 1 -24 WLL 170: LED red 240 100 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Y 120 80 120 2000 32 120 Y 0 300 o 1.0 LL3-TR01 160 Operating position Y (mm) 40 100 200 Scanning range (mm) Operating position Y (mm) LL3-TR01 80 Operating level 0 0 -40 -160 M3x0.5 2.5 1 40 WLL 170T: LED red Order information Type Part no. LL 3-TR02 5 308 053 o 0.25x4 80 -120 X -160 2000 120 480 600 Distance X (mm) -80 3 160 360 WLL 170: LED red WLL 170T: LED red 10 Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass 240 -40 -120 X Y X Operating margin (%) -240 160 120 Y 0 160 300 LL3-TB01-10 160 Operating position Y (mm) 80 Operating position Y (mm) 240 160 100 200 Scanning range (mm) LL3-TB01-10 LL3-TB01 320 240 Operating level 0 Y LL3-TB01 320 1 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TR02 32 24 16 8 0 40 -8 80 120 160 200 Distance X (mm) -16 -24 WLL 170T: LED red 50 100 Scanning range (mm) -32 X Y 600 Operating position Y (mm) 200 400 Scanning range (mm) Operating margin (%) Operating level 0 Operating position Y (mm) 1 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) 240 -80 3 Operating position Y (mm) 120 -240 X 600 240 -160 -80 -120 X -160 80 0 Operating level 200 400 Scanning range (mm) 320 240 Y 0 1 LL3-TS07 320 120 Operating position Y (mm) 80 2000 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TB02 160 120 Operating margin (%) Operating position Y (mm) 160 15 0 200 400 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids N o 1.5 WLL 170: LED red WLL 170T: LED red 10 Y 12 o 2x2 Operating position Y (mm) 3 o3 LL3-TS07 100 Operating margin (%) 3 2.2 WLL 170: LED red WLL 170T: LED red 10 Y M4x0.7 M2.6x0.45 Order information Type Part no. LL 3-TS07 5 308 049 Operating position Y (mm) o1 LL3-TB02 100 Operating margin (%) Order information Type Part no. LL 3-TB02 5 308 048 WLL 170: LED red LL 3 Through-beam systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - through-beam systems Operating position Y (mm) 120 -8 160 200 Distance X (mm) -16 40 o 1.5 o 2.5 7 90 M4 5 15 160 200 Distance X (mm) 16 8 0 WLL 170: LED red LL3-TB03 80 40 120 -8 160 200 Distance X (mm) -16 -24 X 100 -32 2000 o 0,5 5 LL3-TR03-2 Operating margin (%) 32 24 16 8 0 o3 o1 15 80 40 120 -8 160 200 Distance X (mm) -16 WLL 170T: LED red Order information Type Part no. LL 3-TT01 5 308 057 o 0,25 50 100 Scanning range (mm) -24 X WLL 170: LED red WLL 170T: LED red 10 X -32 WLL 170: LED red LL3-TT01 100 WLL 170: LED red WLL 170T: LED red 10 2000 1) 360 -40 480 600 Distance X (mm) -80 -160 WLL 170T: LED red Order information Type Part no. LL 3-TV01 5 308 058 o 1.0 o2 15 o 2.2 240 360 480 600 Distance X (mm) -80 -160 2 0 10 WLL 170: LED red LL3-TV01 100 30 -2 40 50 Distance X (mm) -4 -6 X 20 WLL 170T: LED red Order information Type Part no. LL 3-TV02 5 308 059 WLL 170: LED red WLL 170T: LED red 10 o 0.5 o1 2.2 2000 2 0 10 10 o 2.5 15 o1 20 30 -2 40 50 Distance X (mm) -4 -6 X -8 4 X -8 WLL 170: LED red LL3-TV02 100 WLL 170: LED red WLL 170T: LED red 10 2000 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 120 -40 240 360 480 600 Distance X (mm) -80 -120 -160 80 40 0 WLL 170T: LED red 120 -40 240 360 480 600 Distance X (mm) -80 -120 X 24 -160 X Y 8 40 -8 80 120 160 200 Distance X (mm) -16 -24 WLL 170: LED red 24 16 0 -32 LL3-TV02 32 X WLL 170T: LED red X 16 8 0 40 -8 80 120 160 200 Distance X (mm) -16 -24 X Y 0 X Y 40 Operating position Y (mm) 80 LL3-TV02 32 Y Y 120 50 100 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TV01 160 X Y Operating position Y (mm) 120 Operating level 0 Operating position Y (mm) LL3-TV01 160 1 300 Y 100 200 Scanning range (mm) -32 X Y 1.5 Operating level 0 Operating position Y (mm) 1 1.5 1 1 20 o3 120 -40 -120 X Y -120 0 4 Operating position Y (mm) 240 6 Operating margin (%) 120 40 30 LL3-TT01 8 6 80 Operating margin (%) 0 LL3-TT01 8 120 Y 40 Operating position Y (mm) 80 LL3-TB03 160 10 20 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) LL3-TB03 120 Operating level 0 200 400 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 160 1 Operating level 0 Y 1 Y Flexible end sleeve, do not bend in this area (10 mm), radius of curvature R10 Operating position Y (mm) 120 -16 -32 o 2.2 80 -8 Y o1 1) 0 WLL 170T: LED red Order information Type Part no. LL 3-TB03 5 308 056 3 8 -24 X -32 16 24 Operating level 0 LL3-TR03-2 32 Y -24 24 Operating margin (%) Operating position Y (mm) 8 1 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TR03 32 16 80 50 100 Scanning range (mm) Y LL3-TR03 24 40 Operating level 0 WLL 170T: LED red 10 2000 Y Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 32 o 1.0 10 1000 1 0 o 1.5 o 0.25x4 Operating position Y (mm) 10 WLL 170: LED red WLL 170T: LED red 10 LL3-TR03-2 100 Operating position Y (mm) o 1.0 Order information Type Part no. LL 3-TR03-2 5 308 055 Operating margin (%) o 1.5 o 0.25x4 LL3-TR03 100 Operating margin (%) Order information Type Part no. LL 3-TR03 5 308 054 WLL 170: LED red SENSICK CATALOGUE 543 LL 3 Plastic fibre-optic cables, through-beam systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - through-beam systems o1 50 100 Scanning range (mm) -16 -24 -32 Operating margin (%) o4 11 17.6 WLL 170: LED red LL3-TS12 o 2.2 120 -160 WLL 170T: LED red Order information Type Part no. LL 3-TS10 5 308 063 o 2.2 5 10 3 1200 -10 1600 2000 Distance X (mm) -20 20 10 0 -30 Order information Type Part no. LL 3-TH01 5 308 064 o 1.0 M2.6x0.45 M4 o 2.2 800 1200 1600 2000 Distance X (mm) -20 WLL 170T: LED red Y -40 400 -10 X -30 -40 0 120 WLL 170: LED red LL3-TH01 100 WLL 170T: LED red -160 100 200 Scanning range (mm) Order information Type Part no. LL 3-TH02 5 308 065 120 -40 240 360 480 600 Distance X (mm) -80 -120 -160 544 X 80 40 0 SENSICK CATALOGUE 120 -40 240 360 480 600 Distance X (mm) 15 17 -160 X Y WLL 170: LED red LL3-TH02 LL3-TH02 320 240 160 80 120 -80 -320 480 600 Distance X (mm) X WLL 170: LED red WLL 170T: LED red 10 Operating level 0 0 360 -80 1 -240 WLL 170: LED red 240 2000 240 360 480 600 Distance X (mm) -160 -80 -120 WLL 170T: LED red o 2.2 120 200 400 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 120 Y 0 M4 M3 1 0 -40 100 300 LL3-TH01 160 Operating position Y (mm) 40 Y Operating position Y (mm) 80 LL3-TS10 X 40 -160 Operating level Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass LL3-TH01 200 400 Scanning range (mm) 80 -120 X o 1.5 1 120 480 600 Distance X (mm) WLL 170: LED red WLL 170T: LED red 10 0 160 360 -80 600 LL3-TH02 320 240 160 80 0 120 -80 240 360 480 600 Distance X (mm) -160 X Y 2000 240 -40 -120 X Operating position Y (mm) 12 Operating level 160 Y 40 7 3 WLL 170: LED red WLL 170T: LED red 10 120 80 3 7 3 LL3-TS10 X 120 Y 800 LL3-TS10 100 0 160 X Y 400 Operating position Y (mm) 0 WLL 170: LED red Y Y 10 Operating margin (%) Operating position Y (mm) 30 20 LL3-TS12 40 X Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass Operating position Y (mm) LL3-TS12 X 30 -160 1 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 40 480 600 Distance X (mm) 240 -80 5.25 1 1.3 1000 2000 Scanning range (mm) 120 2000 20 Operating level 0 2000 0 -40 16x0.26 10 30 40 -120 5 1 480 600 Distance X (mm) X WLL 170: LED red WLL 170T: LED red 10 3.2 360 -80 o 0.75 3.6 240 -40 -120 X 100 1.8 3.2 0.4 0 10 Y WLL 170T: LED red Order information Type Part no. LL 3-TS12 5 308 062 160 200 Distance X (mm) 120 -8 X -32 80 80 Y -16 -24 40 40 Y -8 0 80 Y 160 200 Distance X (mm) 120 8 X -240 WLL 170T: LED red -320 X Y 80 16 120 300 LL3-TS08 160 X 120 Operating position Y (mm) 40 X Y 8 LL3-TS08 160 Y Y Operating position Y (mm) Operating position Y (mm) 24 16 0 LL3-TV04 32 X 24 100 200 Scanning range (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating margin (%) LL3-TV04 32 Operating level 0 Operating position Y (mm) Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids WLL 170: LED red WLL 170T: LED red 10 1 2000 30 Operating level 0 Operating margin (%) 1 Operating position Y (mm) 2000 Y 15 LL3-TS08 100 1.5 3 10 1 1.4 M3 o 0.5 2.5 o 1.0 o 2.2 1.8 Operating position Y (mm) o1 WLL 170: LED red WLL 170T: LED red 10 o3 Operating margin (%) 1.75 1.5 Order information Type Part no. LL 3-TS08 5 308 061 Operating margin (%) LL3-TV04 100 Y Order information Type Part no. LL 3-TV04 5 308 060 WLL 170: LED red LL 3 Through-beam systems Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables - through-beam systems WLL 170: LED red WLL 170T: LED red 20 2000 100 1 1000 2000 Scanning range (mm) M3 2,5 o 1,3 10 LL3-TM01 100 360 -40 480 600 Distance X (mm) -80 WLL 170T: LED red Order information Type Part no. LL 3-TM03 5 308 070 o 1.5 o 1.0 10 LL3-TM01 80 40 0 120 240 -160 Operating position Y (mm) 480 600 Distance X (mm) -80 -160 X WLL 170: LED red LL3-TM02 100 2000 WLL 170: LED red WLL 170T: LED red 10 1 Operating level 50 100 Scanning range (mm) 16 8 0 WLL 170: LED red 40 -8 80 120 160 200 Distance X (mm) -16 -32 LL3-TM02 32 24 -24 X LL3-TM02 32 X 24 16 8 0 40 -8 80 120 160 200 Distance X (mm) -16 -24 WLL 170T: LED red -32 X WLL 170: LED red WLL 170: LED red WLL 170T: LED red 10 Operating level 50 100 Scanning range (mm) 80 120 160 200 Distance X (mm) -16 24 16 8 0 40 -8 80 120 160 200 Distance X (mm) -16 -24 WLL 170T: LED red LL3-TM03 32 -32 X WLL 170: LED red Y 8 Y 360 LL3-TM03 Operating position Y (mm) 16 -32 240 100 LL3-TM03 24 X 10 120 2000 32 -24 480 600 Distance X (mm) -80 Material: Core: PMMA, Sheath: PE Sleeve: 1.4305 (German material no.) Stainless steel, rust-and acid-resistant -8 360 -40 0 40 0 -40 -120 WLL 170T: LED red o 1,0 5 40 0 120 1 0 X Order information Type Part no. LL 3-TM02 5 308 069 2,4 -120 X o 0.5 -160 Operating level 160 Operating margin (%) -160 -80 200 400 Scanning range (mm) Y 240 480 600 Distance X (mm) 80 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) 40 Y Operating position Y (mm) 80 360 o2 LL3-TM01 120 240 -40 2000 160 120 o 0,5 M3x0,6 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids -120 0 WLL 170: LED red WLL 170T: LED red 10 0 120 40 Y WLL 170: LED red 1 0 80 -120 X Operating position Y (mm) o 1,0 1600 2000 Distance X (mm) -80 -160 LL3-TY02 X Y Order information Type Part no. LL 3-TM01 5 308 068 1200 120 Operating position Y (mm) Y -160 WLL 170T: LED red 800 -40 -120 X 400 X Y -80 -120 0 Operating position Y (mm) -40 1600 2000 Distance X (mm) Y 1200 Operating position Y (mm) 800 40 600 160 Y 120 80 Operating margin (%) Operating position Y (mm) 40 LL3-TY02 160 120 80 200 400 Scanning range (mm) Material: Core: PMMA; Sheath: Teflon; Sleeve: Teflon LL3-TY01 160 120 Operating level 0 Operating margin (%) LL3-TY01 160 1 Y Material: Core: PMMA; Sheath: Teflon; Sleeve: Teflon 400 WLL 170: LED red WLL 170T: LED red 10 100 Operating level 0 0 o 2.2 o 1.5 20 2000 Y 6 Operating position Y (mm) o5 o5 10 LL3-TY02 100 Operating margin (%) o 1.5 Order information Type Part no. LL 3-TY02 5 308 067 o6 o6 o 2.2 LL3-TY01 100 Operating margin (%) o5 Order information Type Part no. LL 3-TY01 5 308 066 SENSICK CATALOGUE 545