528 SENSICK CATALOGUE
Lichtschranken Baureihe WL 27-2
Fibre-optic systems
Fibre-optic systems:
Bending light the easy way
Assignment of systems to fibre-
optic cable types:
■LL3-D:
Standard proximity system
(from page 530)
– tip adapters as accessories,
– plastic fibres and jackets,
– in most cases can be cut to
any length,
– approx. 25 variants, each
optimised for different
physical loads and
installation dimensions.
■LL3-T:
Standard through-beam system
(from page 532)
– tip adapters as accessories,
– plastic fibres and jackets,
– in most cases can be cut to
any length,
– approx. 25 variants, each
optimised for different
physical loads and
installation dimensions.
■LT: Proximity system
(from page 552)
– glass fibres in chromium-
plated metal jackets.
■LM: Through-beam system
(from page 552)
– glass fibres in metal jackets
and PVC coating.
■LBS: Proximity system
(from page 548)
– glass fibres in stainless steel
jackets,
– Ambient operating tempera-
ture –58 to +315 °C.
■LIS: Through-beam system
(from page 548)
– glass fibres in stainless steel
jackets,
– Ambient operating tempera-
ture –58 to +315 °C.
■LLUV: Proximity system
(from page 555)
– UV fibre-optic cable.
S
Sensors which are to be used in
fully automatic production
processes must be compact and
extremely powerful. However,
many situations demand more
complex solutions. For example if
not enough space is available, or
a reduction in weight is necessary.
Also if the environment of the
device is subject to severe vibra-
tions, electromagnetic interference
or excessive temperatures. Once
again, SICK has the answer:
fibre-optic systems. SICK offers
an extensive range of both pre-
assembled fibre-optic cables and
cables which can be adapted and
cut to length to meet your own
specific needs. Cables are avail-
able with plastic or metal jacket,
plug or screw connections, and a
wide selection of different end
sleeves.
The different types of fibre-optic
cables are distinguished by their
jacket and the number, as well as
arrangement, cross section and
material of the optical fibres.
Glass fibre-optic cables can be
used in temperatures of up to
315 °C. Fibre-optic cables with
plastic fibres can usually be
shortened to any length and their
bending radii are smaller.
Fibre-optic cables
Proximity system
Fibre-optic cables
Through-beam
system
529
SENSICK CATALOGUE
WLL 160(T)
WLL 160
with LL 3 fibre-optic cable, plastic
■manual sensitivity adjustment,
■pre-failure signalling output
and test input,
■timer 0 to 100 ms,
■light-/dark-switching.
WLL 160T
with LL 3 fibre-optic cable, plastic
■teach-in sensitivity adjustment, via button
on device or externally via control signal,
■switching frequency 830/s or 1,600/s,
switch-selectable,
■timer.
WLL 170(T)
WLL 170
with LL 3 fibre-optic cable, plastic
■manual sensitivity adjustment,
■red light LED sender,
■large scanning ranges,
■timer and L.ON-/D.ON selector.
WLL 170 high-speed
with LL 3 fibre-optic cable, plastic
■high-speed 10,000/s,
■red light LED sender,
■timer and L.ON-/D.ON selector.
WLL 170 analogue
with LL 3 fibre-optic cable, plastic
■analogue output voltage 1 to 5 V,
■red light LED sender,
■variable gain.
WLL 170T
with LL 3 fibre-optic cable, plastic
■teach-in sensitivity adjustment via
button on device,
■large scanning ranges,
■red light LED sender,
■optional: anti-interference.
WLL 170T mark sensor
with LL 3 fibre-optic cable, plastic
■teach-in sensitivity adjustment
via button on device,
■green light LED sender,
■optional: anti-interference.
WLL 12
with LL 3, LT, LM fibre-optic cable
■red, infrared or green light LED sender,
■complementary switching outputs,
selectable via control cable,
■switching frequency: 1,300/s.
WLL 24 Exi
with LL 3 fibre-optic cable (l2.2 mm)
■explosion protection E Ex ia IIC T6,
■switching outputs to NAMUR EN 50 277,
■terminal chamber or M 12 plug.
WLL 260
WLL 260 DC
with LBS, LIS fibre-optic cable
■direct voltage supply,
■terminal chamber or M 12 plug,
■test input.
WLL 260 UC
with LBS, LIS fibre-optic cable
■universal voltage supply,relay
switching output,
■terminal chamber.
KTL 5G-2
with LBS, LIS fibre-optic cable
■green light LED sender,
■switching frequency 10,000/s.
LUT
LUT 3-820
with LLUV 8 fibre-optic cable
■UV light source,
■supplementary optical filter.
LUT 1-4
with LLUV 5 fibre-optic cable
■UV light source with high-pressure
mercury-vapour burner,
■supplementary optical filter.
CSL
with LBS, LIS fibre-optic cable
■teach-in,
■adjustable colour selectivity.
Which fibre-optic cable fits which sensor?
Fibre-optic systems
SD SD MD
531
SENSICK CATALOGUE
530 SENSICK CATALOGUE
LL 3 Plastic Fibre-optic cable
Description
(mm)
LL 3 Fibre-optic cable
Proximity Systems
■
Highly flexible
■
Small bend radii
■
Most fibre-optic cables can easily
be cut to length using cutter (supplied)
■
Operating temperature -- 40 …+70 °C,
special designs up to 180 °C
SD
Type
LL 3-DB 01-10
LL 3-DR 03
LL 3-DT 02
LL 3-DV 03
Part no.
5 308 075
5 308 080
5 308 085
LL 3-DF 02
5 308 095
5 308 090
1) For white scanned object, 90 % remission, minimum object
diameter = size of light (aperture LL: approx. 65°)
fibre-optic cable not shortened
2) With scanning front lens for LL 3, see front lenses for LL 3
3) Bend radius of the supple end sleeve
4) Cannot be cut
5) Ambient operating temperature – 40 ... +180 °C
6) Ambient operating temperature – 40 ... +100 °C
7) Minimum object diameter: scanning range reduction!
●
not available
MD SD MD SD MD SD MD SD MD SD MD SD MD
17
24 0.025
40 0.025 10 0.025 50 0.025 10 0.025
15
20 0.015
40 0.015 80.015 50 0.015 20 0.015
7
10 0.015
22 0.015 40.015 25 0.015 30.015
● ●
50.015 ●60.015 ●
● ●
yes ●yes ●
40 0.015 40 0.015 30 0.015
20 0.02020 0.015 14 0.015
40 0.03040 0.025 30 0.025
●yes ●
50.02050.015 30.015
● ●
yes ●yes ●
● ●
50 0.020●60 0.020●
22
30 0.015
60 0.015 18 0.015 75 0.015 50.015
45
65 0.015
110 0.015 40 0.015 135 0.015 25 0.015
● ●
90.015 ●12 0.015 ●
17
24 0.025
40 0.025 10 0.025 50 0.025 10 0.025
● ●
50.015 ●80.015 ●
● ●
10 0.015 ●13 0.015 ●
11
15 0.015
22 0.015 60.015 25 0.015 40.015
30
40 0.015
90 0.015 25 0.015 100 0.015 25 0.015
7
10 0.015
22 0.015 40.015 25 0.015 30.015
● ●
80.015 ●14 0.015 ●
● ●
80.015 ●14 0.015 ●
25
35 0.015
75 0.015 25 0.015 85 0.015 20 0.015
15
20 0.015
30 0.015 80.015 35 0.015 70.015
15
20 0.015
30/12
2)
0.015
8/12
2)
0.015
35/12
2)
0.015
7/12
2)
0.015
28
40 0.015
90 0.015 25 0.015 100 0.015 25 0.015
11
15 0.015
22 0.015 70.015 25 0.015 40.015
11
15 0.015
22 0.015 70.015 25 0.015 40.015
30
45 0.015
90 0.015 25 0.015 90 0.015 25 0.015
WLL 170 T
Green light
WLL 170 T
Red light
3V5V
WLL 170 A
Analogue
WLL 170
Red light
High-speed
WLL 170
Red light
WLL 160 T
Red light
(FAST)
WLL 160 T
Red light
(NORM/MAX)
WLL 160
Red light
Selection table: sensors, fibre-optic cables, scanning ranges
Scanning distance SD
1)
and minimum target diameter MD
7)
in mm in combination with sensor type
●yes ●
●45 0.020●
55 0.02055 0.015 50 0.015
100 0.020100 0.015 70 0.015
90.02080.015 50.015
40 0.03040 0.025 30 0.025
50.02050.015 30.015
90.02090.015 50.015
20 0.02020 0.015 14 0.015
70 0.02070 0.015 50 0.015
20 0.02020 0.015 14 0.015
90.02090.015 60.015
90.02090.015 60.015
70 0.02070 0.015 50 0.015
25 0.02025 0.015 18 0.015
25 0.02025/122) 0.015 18 0.015
70 0.02070 0.015 50 0.015
20 0.015 20 0.015 14 0.015
20 0.015 20 0.015 14 0.015
70 0.015 70 0.015 50 0.015
5 308 094
5 308 093
5 308 092
5 308 091
5 308 089
5 308 088
5 308 087
5 308 086
5 308 084
5 308 083
5 308 082
5 308 081
5 308 079
5 308 078
5 308 077
5 308 076
5 308 074
5 308 073
5 308 072
5 308 071
LL 3-DF 01
LL 3-DY 01
LL 3-DH 02
6)
LL 3-DH 01
5)
LL 3-DV 02
LL 3-DV 01
LL 3-DR 05
4)
LL 3-DT 04
4)
LL 3-DM 03
LL 3-DB 02
LL 3-DR 06
LL 3-DR 04
4)
LL 3-DR 02
LL 3-DR 01
LL 3-DM 02
LL 3-DT 01
LL 3-DB 01
LL 3-DS 06
LL 3-DT 03
LL 3-DM 01
Bend radius
LL 3 Fibre-optic cables
Features
Fibre-optic cable
Proximity System
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
WLL 24-2 Exi
Red light
●
● ● ●
● ●
● ●
● ●
●
2M2
●
●
Adaptor for WLL 12-2
●
2 015 210 2.2 mmAD-LL 2M2
Part no. LL-l
Type
2M2
●
● ●
● ●
● ●
● ●
●
●
●
●
●
●
●
2M2
●
2M2
●
●
2M2
●
●
●
WLL 12-2
Infra-red light
WLL 12-2
Red light
Adaptor for
WLL 12-2
AD-LL-
30 0.02
SD MD SD MD
●
● ●
● ●
●
● ●
40 0.02
40.02
60.02
40.02
20 0.03
50 0.02
●
●
●
●
2M2
2M2
SD MD
12 0.02
30 0.02
●
●
●
●
●
●
40 0.02
40.02
●
●
20 0.03
●
●
40.02
60.02
50 0.02
80.02
15 0.02
Compact sleeve, M 4, long scanning range 25
Super compact, sleeve 2.5 mm diameter 15
Super compact, sleeve M 3 10
Long scanning range, M 6, coaxial fibre-optic cable 25
10 m length, M 6, coaxial fibre-optic cable 25
For front lenses, M 3 15
Thin, short sleeve, M 4, coaxial fibre-optic cable 25
Highly flexible, M 6, long scanning range 4
Highly flexible, small sleeve, M 3 4
Highly flexible, 3 mm diameter, thin sleeve 4
Highly flexible, 1.5 mm diameter, thin sleeve 4
Highly flexible, M 4, compact sleeve 4
Supple sleeve, M 6, long scanning ranges 25/103)
Supple sleeve, M 4 25/103)
Thin long tip, M 3 15
Thin long tip, M 3, coaxial
fibre-optic cable 15
diameter 3.0 mm, thin tip, 0.82 mm diameter 4
90° offset, 5.0 mm diameter 25
90° offset, small sleeve, 3.0 mm diameter 15
90° offset, M 6 25
Temperature resistant to 180 °C, M 6, long scanning range
30
Temperature resistant to 100 °C, M 6
25
Teflon sheath, resistant to chemicals, 6.0 mm diameter 40
Level switch, clear liquid, 6.0 mm diameter 50
Level switch, cloudy liquid, 6.0 mm diameter 50
SR SR MD
SR MD SR MD SR MD SR MD
533
SENSICK CATALOGUE
532 SENSICK CATALOGUE
LL 3 Plastic fibre-optic cable
Description
(mm)
LL 3 Fibre-optic cable
Scanning range SR
1)
and minimum target diameter MD
6)
in mm in combination with sensor type
Through-beam systems
80 110 0.3
230/1000
2)
0.3 60/400
2)
0.3 270/2500
2)
0.3 60/550
2)
0.3
27 38 0.1
80
0.1
20
0.1
100
0.1
15
0.1
6 8 0.1
18
0.1
●●
23
0.1
●●
● ● ●
280
0.3
60
0.3
380
0.3
120
0.3
180/1200
2)
0.2/4.0 180/1200
2)
0.2/4.0 130/850
2)
0.2/4.0
18 0.1 18 0.1 10 0.2
70 0.2 70 0.1 50 0.1
700 0.5 700 0.5 400 0.5
250 0.5 250 0.3 180 0.3
SR MD SR MD
Type
LL 3-TR 01
LL 3-TT 01
LL 3-TS 12
LL 3-TM 03
LL 3-TY 02
Part no.
5 308 062
5 308 070
5 308 067
1) Fibre-optic cable not shortened
2) With scanning front lens for LL 3, see front lenses for LL 3
3) Bend radius of the supple end sleeve
4) Ambient operating temperature – 40 ... +180 °C
5) Ambient operating temperature – 40 ... +100 °C
6) Minimum object diameter: scanning range reduction!
●
not available
Fibre-optic cable
Through-beam
systems
27 38 0.1
80
0.1
20
0.1
100
0.1
15
0.1
95 135 0.2
280
0.2
80
0.2
350
0.2
75
0.2
● ● ●
800
0.3
300
0.3
1800
0.3
200
0.3
130 180 0.5
400
0.5
120
0.5
500
0.5
85
0.5
70 95 0.2
180/2000
2)
0.2
60/400
2)
0.2 250/2500
2)
0.2
25/300
2)
0.2
85 120 0.1
230
0.1
70
0.1
330
0.1
60
0.1
550 800 0.5
800
0.5
340
0.5
1000
0.5
450
0.5
80 110 0.2
200
0.2
65
0.2
250
0.2
55
0.2
23 33 0.1
50
0.1
15
0.1
60
0.1
15
0.1
23 33 0.1
50
0.1
15
0.1
60
0.1
15
0.1
80 110 0.2
160
0.2
30
0.2
230
0.2
55
0.2
90 125 0.2
280
0.2
80
0.2
330
0.2
75
0.2
25 35 0.1
60
0.1
15
0.1
80
0.1
15
0.1
25 35 0.1
60
0.1
15
0.1
80
0.1
15
0.1
25 35 0.1
60
0.1
15
0.1
80
0.1
15
0.1
80 110 0.5
250/1000
2)
0.5 75/200
2)
0.5 300/1200
2)
0.5 120/500
2)
0.5
160 230 0.5
460/2000
2)
0.5 130/400
2)
0.5 580/2500
2)
0.5 140/600
2)
0.5
160 230 0.5
460
0.5
130
0.5
580
0.5
140
0.5
95 135 0.2
280/2500
2)
0.2 80/500
2)
0.2 350/3200
2)
0.2 75/650
2)
0.2
WLL 170 T
Green light
WLL 170 T
Red light
3V5V
WLL 170 A
Analogue
WLL 170
Red light
High-speed
WLL 170
Red light
SR MD
WLL 160 T
Red light
(FAST)
WLL 160 T
Red light
(NORM/MAX)
WLL 160
Red light
Bend radius
LL 3 Fibre-optic cables
70 0.2 70 0.1 50 0.1
200 0.2 200 0.2 150 0.2
1000 0.8 1000 0.5 700 0.5
350 0.5 350 0.5 240 0.5
180/1500
2)
0.2/4.0 180/1500
2)
0.2/4.0 130/1050
2)
0.2/4.0
260 1.0 260 1.0 190 1.0
200 0.2 200 0.2 150 0.2
40 0.2 40 0.2 30 0.2
40 0.2 40 0.2 30 0.2
150 0.2 150 0.2 130 0.2
200 0.2 200 0.2 150 0.2
50 0.2 50 0.1 40 0.2
50 0.2 50 0.1 40 0.2
50 0.2 50 0.1 40 0.2
250/900
2)
0.5/4.0 250/900
2)
0.5/4.0 190/660
2)
0.5/4.0
400/1500
2)
0.5/4.0 400/1500
2)
0.2/4.0 280/1500
2)
0.2/4.0
500 0.5 500 0.5 360 0.5
200/2000
2)
0.2/4.0 200/2000
2)
0.2/4.0 150/1500
2)
0.2/4.0
5 308 069
5 308 068
5 308 066
5 308 065
5 308 064
5 308 063
5 308 061
5 308 060
5 308 059
5 308 058
5 308 057
5 308 056
5 308 055
5 308 054
5 308 053
5 308 052
5 308 051
5 308 050
5 308 049
5 308 048
LL 3-TM 02
LL 3-TM 01
LL 3-TY 01
LL 3-TH 02
5)
LL 3-TH 01
4)
LL 3-TS 10
LL 3-TS 08
LL 3-TV 04
LL 3-TV 02
LL 3-TV 01
LL 3-TB 03
LL 3-TR 03-2
LL 3-TR 03
LL 3-TR 02
LL 3-TB 01-10
LL 3-TB 01
LL 3-TS 07
LL 3-TB 02
Selection table: sensors, fibre-optic cables, scanning ranges
■Highly flexible
■Small bend radii
■Most fibre-optic cables can be easily
cut to length using cutter (supplied)
■Operating temperature – 40 …+70 °C,
special designs up to 180 °C
Features
2M2
● ● ●
● ● ●
2M2
1M0
● ● ●
2M2
2M2
2M2
2M2
2M2
●
2M2
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
1M0
2M2
2M2
2M2
2M2
WLL 24-2 Exi
Red light
WLL 12-2
Infra-red light
WLL 12-2
Red Light
Adaptor for
WLL 12-2
AD-LL-
MDSR
0.385
0.555
0.5140
0.5140
0.2110
●● ●● ●● ●● ●●
0.5340
0.245
●● ●● ●●
0.5150
0.8460
0.5110
0.260
1.060
●●
0.225
●●
120 0.2
180 0.5
180 0.5
70 0.5
110 0.3
25 0.2
SR MD SR MD
45 0.5
45 0.5
25 0.5
25 0.3
25 0.2 4
0.2
60 0.2
400 0.5
10 0.2
75 1.0
70 0.2
160 0.5
620 0.8
160 0.5
20 1.0
15 0.2
30 0.5
70 0.8
25 0.5
30 0.2 40.2
Adaptor for WLL 12-2
2 015 026 1.0 mm
2 015 210 2.2 mmAD-LL 2M2
AD-LL 1MO
Part no. LL-l
Type
Standard M 4 25
Standard, 3 mm diameter, long range 35
Standard, M 4, long range 25
Standard, M 4, length 10 m 25
Highly flexible, M 4, long range 4
Highly flexible, M 3 4
Small sleeve, 1.5 mm diameter, highly flexible, length 1 m 4
Small sleeve, 1.5 mm diameter, highly flexible, length 2 m 4
Flexible end sleeve, M 4 25/10
3)
Compact, M 3, end piece 1.0 mm diameter 15
90° offset, standard, 3 mm diameter 25
90° offset, compact, 2.5 mm diameter 15
90° offset, compact, M 3 15
90° offset, standard, 3 mm diameter 25
90° offset, long range 25
Fibre-optic cable cell 25
Temperature-resistant, M 4 25
Temperature-resistant up to 180 °C, M 4 30
Teflon sheath, 6.0 mm diameter, chemically resistant 40
Teflon sheath, 6.0 mm diameter, chemically resistant 40
90° offset
Small end sleeve, M 3, long range 25
Small end sleeve M 3 15
Small end sleeve, 1.5 mm diameter 15
534
LL 3 Plastic fibre-optic cables
SENSICK CATALOGUE
Coaxial structure for precise switching
Compact end sleeve, excellent scanning ranges
Thin end sleeves, long, very thin and flexible end tips: ideal for small, inaccessible objects
Extremely flexible fibre-optic cable, bend radius R4, for dynamic mechanical systems
Integrated 90° offset, extremely short installation depths
Special applications:
Accessories: lenses at the front with focused optics
Chemicals
High temperature
Fibre-optic cable
length 10 m
Level switches
Small spot, ideal for extremely
small parts, high precision
LL3-DA02
f = 12 mm
Standard, L = 10 m
LL3-DB01-10
M6
Compact head
LL3-DT01
M3
Super-compact head
LL3-DM02
M4
Compact head, M3
LL3-DS06
M3
Super-compact head ø 2,5
LL3-DT03
ø 2,5
Compact head,
large scanning range
LL3-DM01
M4
Compact head,
flexible end sleeve
LL3-DM03
M4
Standard, flexible end sleeve,
large scanning range
LL3-DB02
M6
90° offset
LL3-DV03
M6
90° offset
LL3-DV01
ø 5
90° offset, compact end sleeve
LL3-DV02
ø 1,5
ø 3
Compact, thin end tip
LL3-DT02
M3
ø 0.82
Compact head, thin end tip
LL3-DT04
M3
ø 0.82
Level switch: Clear liquids,
resistant to chemicals
LL3-DF01
Teflon sheath: resistant to
chemicals
LL3-DY01
ø 6
Resistant up to 180 °C
extremely large scanning range
LL3-DH01
M6
Resistant up to 100 °C
LL3-DH02
M6
Level switch: cloudy liquids,
resistant to chemicals
LL3-DF02
Basic fibre-optic cable for
scanners with front lenses
LL3-DT01
Small spot, ideal for marks,
colour recognition, small parts
LL3-DA01
f = 6 mm
Standard, large scanning range
LL3-DB01
M6
Flexible, extremely short,
extremely thin end sleeve
LL3-DR04
ø 1.5
R4
Super-compact, flexible thin
end tip
LL3-DR05
ø 0.82 ø 3
R4
Flexible, extremely short end
sleeve
LL3-DR03
R4
Flexible, small end sleeve
LL3-DR02
M3
R4
Flexible, compact head
LL3-DR06
M4
R4
LL3-DR01
M6
Flexible, standard, large scanning
range
R4
ø 3
Flow chart – selection of fibre-optic cables
Proximity systems
535
LL 3 Fibre-optic cables
SENSICK CATALOGUE
Standard
Thin, short end sleeves
Highly flexible fibre-optic cable, extremely small bend radius R4, for dynamic mechanical systems
Integrated 90°offset, extremely short installation depths
High temperature
Chemicals
Special applications:
Accessories: front lenses, long ranges (max. 3200 mm), 90° offset
Fibre-optic cable length 10 m
Standard, L = 10 m Flexible end sleeve, ideal for
inaccessible objects
LL3-TB03
Standard, long range
LL3-TB01
Standard, long range
LL3-TS07
Standard
LL3-TB02 LL3-TB01-10
Compact end sleeve
LL3-TM02
Compact head, thin end tip
LL3-TT01
Flexible, standard, long range
LL3-TR01
90° offset
LL3-TS08
90° offset
LL3-TV01
90°, very small sleeve
LL3-TV04
90°, long range, easy assembly
LL3-TS12
Long ranges
LL3-TA01
Suitable LL 3 fibre-optic cables
LL3-TB02
LL3-TB01
LL3-TB01-10
LL3-TR01
LL3-TH01
90° offset,
extremely short
installed depth,
long range
LL3-TA02
Compact, long range
LL3-TM01
Flexible, extremely small end
sleeve
LL3-TR02
Flexible, extremely thin end
sleeve
LL3-TR03
LL3-TR03-2
Resistant up to 100 °C
LL3-TH01
Resistant up to 180 °C, large
scanning ranges
LL3-TH02
Teflon sheath: resistant to
chemicals
LL3-TY01
Teflon sheath, 90° offset
LL3-TY02
Line of fibre-optic cables
Line of fibre-optic cables
LL3-TS10
M4
M3
M4 M3
M3
M3 ø 0.5 ø 3
ø 1.5
ø 3
M4 ø 6 ø 6
ø 3 90°, very small sleeve
LL3-TV02
ø 2.5
ø 1
90°, very small sleeve
LL3-TV02
ø 2.5
ø 1
ø 2
M4 M4 M4
ø 3
Extremely thin, extremely short
end sleeve
LL3-TM03
ø 1.5
R4 R4 R4
R4
R4
M4
Through-beam
systems
Flow chart – selection of fibre-optic cables
536
LL 3 Plastic fibre-optic cables, proximity systems
SENSICK CATALOGUE
ø 1.0x2 ø 1.3x2M4
200012
3
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DM01
WLL 170T: LED red
Distance X (mm)
12080
X
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
157. 5
Y
Xfine copper wire
22.5
LL3-DM01
ø 0.5x2
ø 2.5
ø 2.5
10 2000
ø 1.0x2
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
LL3-DM01
Operating level
10
1
050100
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DT03
WLL 170T: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DT03
LL3-DT03
Operating level
10
1
0102030
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
M3x0.5 ø 1.0x2
ø 0.5x2
ø 5.5
ø 2.5 12 2000
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DS06
WLL 170T: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DS06
ø 0.26x16 Receiver
ø 1 Sender
10 5
515 2000
ø 2.5 M6x0.75 1) 2) ø 2.2x2
LL3-DS06
Operating level
10
1
0102030
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DB01
WLL 170T: LED red
Distance X (mm)
12080
X
Y
Xfine copper wire
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Distance X (mm)
157. 5
ø
LL3-DB01
LL3-DB01
Operating level
10
1
050100
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
1) Sender
2) Receiver
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DM01
WLL 170: LED red
Distance X (mm)
12080
X
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
157. 5
Y
Xfine copper wire
22.5
LL3-DM01
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DT03
WLL 170: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DT03
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DS06
WLL 170: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DS06
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DB01
WLL 170: LED red
Distance X (mm)
12080
X
Y
Xfine copper wire
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Distance X (mm)
157. 5
ø
LL3-DB01
Order information
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Type Part no.
LL 3-DM01 5 308 071
Order information
Type Part no.
LL 3-DT03 5 308 072
Order information
Type Part no.
LL 3-DS06 5 308 073
Order information
Type Part no.
LL 3-DB01 5 308 074
537
LL 3 Proximity systems
SENSICK CATALOGUE
ø 0.26x16 Receiver
55 15 10000
10
ø 1 Sender ø 2.5 2)1) ø 2.2x2
M6x0.75
Y
Operating position Y (mm)
Distance X (mm)
80 100604020
4
2
0
-2
-4
-6
-8
6
LL3-DB01-10
8
WLL 170T: LED red
X
Operating position Y (mm)
510
X
Y
2
1
0
-1
-2
-3
-4
ø 0.015 mm
ø 0.45 mm
ø 0.008 mm
Distance X (mm)
ø 0.025 mm
4
3
LL3-DB01-10
15
WLL 170T: LED red
øfine copper wire
ø 0.25x9 Receiver
M3x0.5 ø 1.3x2
2)
1)
513
18 2000
ø 0.5 Sender
WLL 170T: LED red
LL3-DB01-10
Scanning distance (mm)
Operating level
1
050
Operating margin (%)
100
10
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DT01
WLL 170T: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DT01
LL3-DT01
Operating level
10
1
02010 40 605030
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
1) Sender
2) Receiver
1) Sender
2) Receiver
Y
Operating position Y (mm)
Distance X (mm)
80 100604020
4
2
0
-2
-4
-6
-8
6
LL3-DB01-10
8
WLL 170: LED red
X
Operating position Y (mm)
510
X
Y
2
1
0
-1
-2
-3
-4
ø 0.015 mm
ø 0.45 mm
ø 0.008 mm
Distance X (mm)
ø 0.025 mm
4
3
LL3-DB01-10
15
WLL 170: LED red
øfine copper wire
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DT01
WLL 170: LED red
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DT01
M4x0.7
ø 0.5 Sender
ø 0.25x9 Receiver
2000123
ø 1.3x2
ø 8.5
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DM02
WLL 170T: LED red
Distance X (mm)
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DM02
5,2 12 2000
ø 2.2x2
ø 0.265x16
ø 0.265x16
M6x0.75
LL3-DM02
Operating level
10
1
0 102030405060
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
Distance X (mm)
Y
40 160 200
LL3-DR01
WLL 170T: LED red
12080
X
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
157. 5
Y
Xfine copper wire
22.5
LL3-DR01
LL3-DR01
Operating level
10
1
050100
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DM02
WLL 170: LED red
Distance X (mm)
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DM02
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
Distance X (mm)
Y
40 160 200
LL3-DR01
WLL 170: LED red
12080
X
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
157. 5
Y
Xfine copper wire
22.5
LL3-DR01
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Order information
Type Part no.
LL 3-DB01-10 5 308 075
Order information
Type Part no.
LL 3-DM02 5 308 077
Order information
Type Part no.
LL 3-DR01 5 308 078
Order information
Type Part no.
LL 3-DT01 5 308 076
538
LL 3 Plastic fibre-optic cables, proximity systems
SENSICK CATALOGUE
M3x0.5 ø 1x2
100013
ø 0.25x2
ø 0.25x2
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DR02
WLL 170T: LED red
128
X
2.5
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
5
Y
Xfine copper wire
7. 5
LL3-DR02
10 2000
ø 1.0x2
ø 3
ø 0.25x2 Sender
ø 0.25x2 Receiver
LL3-DR02
Operating level
10
1
01020
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DR03
WLL 170T: LED red
3020
X
WLL 170T: LED red
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR03
0
10
1
Operating margin (%)
LL3-DR03
Operating level
10 20 30
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
ø 0.25x2
ø 0.25x2
ø 1.5
ø 1.5 ø 1.2 ø 1x2 ø 2.2x2ø 3
900
1515 25
100
Y
41620
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
LL3-DR04
WLL 170T: LED red
128
X
Distance X (mm)
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR04
M2.6x0.45
ø 0.25x4
ø 0.25x4
M4x0.7
33 12 2000
ø 1x2
LL3-DR04
Operating level
10
1
01020
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DR06
WLL 170T: LED red
3020
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
--1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR06
LL3-DR06
Operating level
10
1
0102030
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DR02
WLL 170: LED red
128
X
2.5
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
5
Y
Xfine copper wire
7. 5
LL3-DR02
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DR03
WLL 170: LED red
3020
X
WLL 170: LED red
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR03
Y
41620
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
LL3-DR04
WLL 170: LED red
128
X
Distance X (mm)
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR04
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DR06
WLL 170: LED red
3020
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DR06
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Order information
Type Part no.
LL 3-DR02 5 308 079
Order information
Type Part no.
LL 3-DR03 5 308 080
Order information
Type Part no.
LL 3-DR04 5 308 081
Order information
Type Part no.
LL 3-DR06 5 308 082
539
LL 3 Proximity systems
SENSICK CATALOGUE
ø 0.26x16 Receiver
ø 1 Sender
10 5
5
1590 2000
ø 2,5 M4x0.7 M6x0.75 ø 2.2x2
1)
3)
2)
LL3-DB02
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
Y
40 160 200
WLL 170T: LED red
Distance X (mm)
12080
X
LL3-DB02
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Y
Xfine copper wire
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
Distance X (mm)
157. 5
ø
M4x0.7
ø 0.5x1
3
ø 0.5x1
ø 1.5 ø 2.5
1)
90 5 12 2000
ø 1x2
Operating level
0
1
LL3-DB02
10
50 100
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DM03
WLL 170T: LED red
Distance X (mm)
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
5
WLL 170T: LED red
Distance X (mm)
10
Y
Xfine copper wire
15
LL3-DM03
0
10
1
Operating margin (%)
LL3-DM03
Operating level
10 20 30
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
1) Flexible end sleeve, do not bend in this
region (10 mm), bend radius R10
2) Sender (marked in blue)
3) Receiver
1) Flexible end sleeve, do not bend in this
region (10 mm), bend radius R10
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
LL3-DB02
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
Y
40 160 200
WLL 170: LED red
Distance X (mm)
12080
X
LL3-DB02
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Y
Xfine copper wire
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
Distance X (mm)
15
ø
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DM03
WLL 170: LED red
Distance X (mm)
3020
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
5
WLL 170: LED red
Distance X (mm)
10
Y
Xfine copper wire
15
LL3-DM03
ø 0.25x1
ø 0.25x1 ø 3 ø 1.0x2
ø 0.82
M3x0.5
1)
1015 5 2000
2.4
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DT02
WLL 170T: LED red
128
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
31.5
Y
Xfine copper wire
4.5
LL3-DT02
ø 0.125x9
ø 0.25
ø 3
1515 500
ø 1.0x2 ø 2.2x2
M3x0.5
ø 0,82
1)
Material: Core: PMMA, Sheath: PE
Sleeve: CuZn, nickel-plated brass
LL3-DT02
Operating level
10
1
0510
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DT04
WLL 170T: LED red
128
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DT04
LL3-DT04
Operating level
10
1
01020
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
1) End sleeve cannot be bent 1) End sleeve cannot be bent
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DT02
WLL 170: LED red
128
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
31.5
Y
Xfine copper wire
4.5
LL3-DT02
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
Distance X (mm)
Y
41620
LL3-DT04
WLL 170: LED red
128
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DT04
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Order information
Type Part no.
LL 3-DB02 5 308 083
Order information
Type Part no.
LL 3-DM03 5 308 084
Order information
Type Part no.
LL 3-DT02 5 308 085
Order information
Type Part no.
LL 3-DT04 5 308 086
540
LL 3 Plastic fibre-optic cables, proximity systems
SENSICK CATALOGUE
ø 0.82 ø 3 ø 3
500
ø 1.2x2 ø 2.2x2
ø 0.25
ø 0.25
515 15 75 25
Y
41620
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
LL3-DR05
WLL 170T: LED red
128
X
Distance X (mm)
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
31.5
Y
Xfine copper wire
4.5
LL3-DR05
ø 5
ø 2.7
20001520
4.88
1.5
2
ø 2.2x2
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV01
WLL 170T: LED red
3020
X
Y
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DV01
LL3-DR05
Operating level
10
1
0510
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-DV01
Operating level
10
1
050
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE
Sleeve: CuZn, nickel-plated brass
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Y
41620
Operating position Y (mm)
4
3
2
1
0
-1
-2
-3
-4
LL3-DR05
WLL 170: LED red
128
X
Distance X (mm)
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
31.5
Y
Xfine copper wire
4.5
LL3-DR05
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV01
WLL 170: LED red
3020
X
Y
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DV01
ø 0.5x2 ø 1.5 ø 3 ø 1
1510
1.5
2
2000
Distance X (mm)
Y
41620
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV02
WLL 170T: LED red
128
X
Y
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DV02
2.5
ø 2.7
2
520 2000
M6x0.75 ø 2.2x2
ø 1
LL3-DV02
Operating level
10
1
01020
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Distance X (mm)
Y
20 80 100
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV03
WLL 170T: LED red
6040
X
Y
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DV03
LL3-DV03
Operating level
10
1
050
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Distance X (mm)
Y
41620
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV02
WLL 170: LED red
128
X
Y
X
ø 0.025 mm
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
52.5
Y
Xfine copper wire
7. 5
LL3-DV02
Distance X (mm)
Y
20 80 100
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DV03
WLL 170: LED red
6040
X
Y
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DV03
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Order information
Type Part no.
LL 3-DR05 5 308 087
Order information
Type Part no.
LL 3-DV01 5 308 088
Order information
Type Part no.
LL 3-DV02 5 308 089
Order information
Type Part no.
LL 3-DV03 5 308 090
541
LL 3 Proximity systems
SENSICK CATALOGUE
ø 1.5x2
ø 1.5 315
19 2000
ø 4.9 M6x0.75 ø 2.2x2
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DH01
WLL 170T: LED red
Distance X (mm)
12080
X
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
157. 5
Y
Xfine copper wire
22.5
LL3-DH01
ø 1x2 ø 2.5 M6x0.75 ø 2.2
5 15 2000
5
10
LL3-DH01
Operating level
10
1
050100150
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DH02
WLL 170T: LED red
Distance X (mm)
12080
X
Y
Xfine copper wire
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Distance X (mm)
157. 5
LL3-DH02
LL3-DH02
Operating level
10
1
050100
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
16
2000
2100
ø 2.2x2
ø 2.2ø 6
Distance X (mm)
Y
20 80 100
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DY01
WLL 170T: LED red
6040
X
ø 0.025 mm
ø 0.015 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170T: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DY01
ø 1.4
ø 1.8
ø 6
ø 5.5
ø 6
11.6
1.7
i
60
3
8 16 2000 100
8
Material: Core: PMMA, Sheath: Teflon
Sleeve: Teflon
LL3-DY01
Operating level
10
1
050
Operating margin (%)
Scanning distance (mm)
100
WLL 170: LED red
WLL 170T: LED red
Material: Core: PMMA, Sheath: Teflon
Sleeve: Teflon
1) For transparent liquids
2) For cloudy liquids
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DH01
WLL 170: LED red
80
X
Distance X (mm)
120
ø 0.025 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
ø 0.015 mm
Distance X (mm)
Y
Xfine copper wire
22.5
LL3-DH01
7. 5 1 5
Y
40 160 200
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-DH02
WLL 170: LED red
Distance X (mm)
12080
X
Y
Xfine copper wire
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
22.5
ø 0.025 mm
ø 0.015 mm
6
4.5
3
1.5
0
-1.5
-3
-4.5
-6
Operating position Y (mm)
Distance X (mm)
157. 5
LL3-DH02
Distance X (mm)
Y
20 80 100
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-DY01
WLL 170: LED red
6040
X
ø 0.025 mm
4
3
2
1
0
-1
-2
-3
-4
Operating position Y (mm)
WLL 170: LED red
ø 0.08 mm
ø 0.45 mm
Distance X (mm)
105
Y
Xfine copper wire
15
LL3-DY01
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – proximity systems
Order information
Type Part no.
LL 3-DH01 5 308 091
Order information
Type Part no.
LL 3-DH02 5 308 092
Order information
Type Part no.
LL 3-DY01 5 308 093
Order information
Type Part no.
LL 3-DF01 5 308 094
1)
LL 3-DF02 5 308 095
2)
542
LL 3 Plastic fibre-optic cables, through-beam systems
SENSICK CATALOGUE
ø 1
M4x0.7
M2.6x0.45
1233
2.2
2000
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB02
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB02
WLL 170: LED red
360240
X
ø 1.5
N
ø 3
15 2000
ø 2x2
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TS07
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TS07
WLL 170: LED red
360240
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
3
ø 0.26x16
12
37 2000
ø 2.2M4
M2.6x0.45
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TR01
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TR01
WLL 170: LED red
360240
X
2.5
ø 1.0
ø 0.25x4
10 2000
M3x0.5
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR02
WLL 170T: LED red
12080
X
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR02
WLL 170: LED red
12080
X
Material: Core: PMMA, Sheath: PE
Sleeve: CuZn, nickel-plated brass
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
200012
3
3
7
ø 2.2ø 1.5 M2.6x0.45 M4
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TB01
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TB01
WLL 170: LED red
360240
X
ø 1.5 ø 2.2
M4
M2.6x0.45
1000012
37
3
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB01-10
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB01-10
WLL 170: LED red
360240
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
LL3-TB02
Operating level
10
1
0 400200
Operating margin (%)
WLL 170: LED red
WLL 170T: LED red
Scanning range (mm)
100
LL3-TS07
Operating level
10
1
0400 600
200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TB01
Operating level
10
1
0 400 600200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TB01-10
Operating level
10
1
0 100 200 300
Operating margin (%)
WLL 170T: LED red
Scanning range (mm)
100
LL3-TR01
Operating level
10
1
0 300
200
100
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TR02
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems
Order information
Type Part no.
LL 3-TB02 5 308 048
Order information
Type Part no.
LL 3-TS07 5 308 049
Order information
Type Part no.
LL 3-TB01 5 308 050
Order information
Type Part no.
LL 3-TB01-10 5 308 051
Order information
Type Part no.
LL 3-TR01 5 308 052
Order information
Type Part no.
LL 3-TR02 5 308 053
543
LL 3 Through-beam systems
SENSICK CATALOGUE
ø 0.25x4 ø 1.5
10 1000
ø 1.0
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR03
WLL 170T: LED red
12080
X
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR03
WLL 170: LED red
12080
X
ø 0.25x4 ø 1.5
10 2000
ø 1.0
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR03-2
WLL 170T: LED red
12080
X
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TR03-2
WLL 170: LED red
12080
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
ø 3ø 2 ø 2.2
1520 2000
1.5 1
ø 1.0
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TV01
WLL 170T: LED red
360240
X
X
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TV01
WLL 170: LED red
360240
X
X
2.2
1.5 1
20001510
ø 2.5 ø 1
ø 0.5
ø 1
Distance X (mm)
YY
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TV02
WLL 170T: LED red
12080
X
X
Distance X (mm)
YY
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TV02
WLL 170: LED red
12080
X
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
ø 1 ø 1.5 ø 2.5 M4 ø 2.2
15 2000590
7
1)
3
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB03
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TB03
WLL 170: LED red
360240
X
ø 0,25 ø 0,5 ø 3 ø 1
5 15 2000
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-TT01
WLL 170T: LED red
3020
X
Distance X (mm)
Y
10 40 50
Operating position Y (mm)
8
6
4
2
0
-2
-4
-6
-8
LL3-TT01
WLL 170: LED red
3020
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
1) Flexible end sleeve, do not bend in this
area (10 mm), radius of curvature R10
LL3-TR03
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TR03-2
Operating level
10
1
0100
50
Operating margin (%)
WLL 170T: LED red
Scanning range (mm)
100
LL3-TB03
Operating level
10
1
0 400200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TT01
Operating level
10
1
03020
10
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TV01
Operating level
10
1
0300200
100
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TV02
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems
Order information
Type Part no.
LL 3-TR03 5 308 054
Order information
Type Part no.
LL 3-TR03-2 5 308 055
Order information
Type Part no.
LL 3-TB03 5 308 056
Order information
Type Part no.
LL 3-TV01 5 308 058
Order information
Type Part no.
LL 3-TV02 5 308 059
Order information
Type Part no.
LL 3-TT01 5 308 057
544
LL 3 Plastic fibre-optic cables, through-beam systems
SENSICK CATALOGUE
LL3-TS12
Operating level
10
1
02000
1000
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
1.75
1.5
ø 1 ø 1M3
2.5 1510 2000
ø 0.5
Distance X (mm)
YY
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TV04
WLL 170T: LED red
12080
X
X
Distance X (mm)
YY
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TV04
WLL 170: LED red
12080
X
X
1.5
1.8
1.4
1
ø 2.2
ø 3
30 2000
ø 1.0
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TS08
WLL 170T: LED red
360240
X
X
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TS08
WLL 170: LED red
240
X
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
ø 1.0 M2.6x0.45 M4 ø 2.2
7
3
312 2000
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TH01
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TH01
WLL 170: LED red
360240
X
2000
ø 2.2
17
15
3
1
M3 M4
7
ø 1.5
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TH02
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
320
240
160
80
0
-80
-160
-240
-320
LL3-TH02
WLL 170: LED red
360240
X
Material: Core: PMMA, Sheath: PE
Sleeve: CuZn, nickel-plated brass
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
1.8
0.4
ø 2.2
200030
10
3.23.6
3.2
11
ø 4
17.6
ø 0.75
31.3
Distance X (mm)
Y
Y
400 1600 2000
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-TS12
WLL 170T: LED red
1200800
X
X
Distance X (mm)
Y
Y
400 1600 2000
Operating position Y (mm)
40
30
20
10
0
-10
-20
-30
-40
LL3-TS12
WLL 170: LED red
1200800
X
X
5.25
16x0.26
ø 2.2
20
10
10
1
55
3
2000
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TS10
WLL 170T: LED red
360240
X
X
Distance X (mm)
YY
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TS10
WLL 170: LED red
360240
X
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting
and acids
Material: Core: PMMA, Sheath: PE
Sleeve: CuZn, nickel-plated brass
LL3-TV04
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TS08
Operating level
10
1
0200 300
100
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TS10
Operating level
10
1
0400
200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TH01
Operating level
10
1
0 300
200
100
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TH02
Operating level
10
1
0 600
400
200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems
Order information
Type Part no.
LL 3-TV04 5 308 060
Order information
Type Part no.
LL 3-TS08 5 308 061
Order information
Type Part no.
LL 3-TS12 5 308 062
Order information
Type Part no.
LL 3-TS10 5 308 063
Order information
Type Part no.
LL 3-TH01 5 308 064
Order information
Type Part no.
LL 3-TH02 5 308 065
545
LL 3 Through-beam systems
SENSICK CATALOGUE
ø 1.5
100
6
ø 6 ø 5
20
2000
ø 2.2
Distance X (mm)
Y
400 1600 2000
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TY01
WLL 170T: LED red
1200800
X
Distance X (mm)
Y
400 1600 2000
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TY01
WLL 170: LED red
1200800
X
ø 5
ø 6
ø 5 ø 2.2 ø 1.5
100
2000
20
Distance X (mm)
Y
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TY02
WLL 170T: LED red
360240
X
X
Distance X (mm)
Y
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TY02
WLL 170: LED red
360240
X
X
Material: Core: PMMA; Sheath: Teflon;
Sleeve: Teflon
Material: Core: PMMA; Sheath: Teflon;
Sleeve: Teflon
ø 0.5 ø 1.5
10 2000
ø 1.0
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TM03
WLL 170T: LED red
12080
X
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TM03
WLL 170: LED red
12080
X
Material: Core: PMMA, Sheath: PE
Sleeve: 1.4305 (German material no.)
Stainless steel, rust-and acid-resistant
ø 1,0
2,5
M3
10 2000
ø 1,3
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TM01
WLL 170T: LED red
360240
X
Distance X (mm)
Y
120 480 600
Operating position Y (mm)
160
120
80
40
0
-40
-80
-120
-160
LL3-TM01
WLL 170: LED red
360240
X
2,4
M3x0,6
ø 2
ø 0,5
5 10 2000
ø 1,0
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TM02
WLL 170T: LED red
12080
X
Distance X (mm)
Y
40 160 200
Operating position Y (mm)
32
24
16
8
0
-8
-16
-24
-32
LL3-TM02
WLL 170: LED red
12080
X
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
Material: Core: PMMA, Sheath: PE;
Sleeve: 1.4305 (German materials no.)
Stainless steel, resistant to rusting and acids
LL3-TY01
Operating level
10
1
02000
1000
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TY02
Operating level
10
1
0 200 400 600
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TM01
Operating level
10
1
0400
200
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TM02
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
LL3-TM03
Operating level
10
1
0100
50
Operating margin (%)
Scanning range (mm)
100
WLL 170: LED red
WLL 170T: LED red
Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems
Order information
Type Part no.
LL 3-TY01 5 308 066
Order information
Type Part no.
LL 3-TY02 5 308 067
Order information
Type Part no.
LL 3-TM01 5 308 068
Order information
Type Part no.
LL 3-TM02 5 308 069
Order information
Type Part no.
LL 3-TM03 5 308 070
