2.5mm Pitch connector for full lock and discrete wire connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full lock function added Double lock engaged The inner lock system adopts a full lock mechanism. This mechanism prevents disengagement to occur due to an unexpected external shock. Double lock engaged 2. Increase in crimping contact fixation force and semi-insertion prevention The double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. 3. Mold lance adopted Since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. Mis-insertion prevention Equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. 5. Means to prevent solder crack The glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. Correspond to potting Corresponding to potting, the pin header is provided for product variations. Corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. Production facility cost reduction The female crimping contact uses the DF1B series crimping contact, which has been conventionally marketed. Investment for new facilities isn't needed. However, if the retainer is installed in the cable with AWG#22 or more wire, use the DF1E crimping contact. The female crimping contact for in-line is used together with the DF1B applicator. Therefore, no investment is needed for new facilities. 1 8. Correspond to automatic insertion machine The radial tape packaging is provided for 2 to 8 contacts on the straight pin header side, in order to correspond to mass production. 9. Various applications With the same series, various applications can be used for the board solder dip type and inline. Applications Electronic equipment, office machines, industrial equipment, and consumer equipment, and so on Products specifications Rated current note 1. 3A AWG#20~24 : 26 : 2A 28 : 1A 30 : 0.5A Rated voltage AC250V Rating Operating temperature range -35~+85c Note 2. Operating moisture range -40~80% Item Storage temperature range -10~+60c note 3. Storage moisture range -40~70% Specification Condition 1. Contact resistance 30mo max. Measured at 20mV max. and 1mA 2. Insulation resistance 1000Mo min. Measured at 500V DC 3. Withstand voltage Neither short or breakdown 150V AC energized for 1 minute 4. Single insertion/extraction force MIN 0.4N, MAX 4.4N Measured at the square steel pin with 0.6350.002 5. Operating life 30mo max 30 cycles of insertions/extractions 6. Vibration Electrical discontinuity, 1S max. 10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively. 7. Shock Electrical discontinuity, 1S max. 490m/s and 11ms, sin/cosine 3 directions, 3 times, respectively 8. Moisture resistance 30mo max Exposed to temperature 402c and humidity 90~95% for 96 hours 9. Temperature cycle 30mo max. (-55c: 30 minutes-> 5~35c: 5 minutes-> 85c: 30 minutes-> 5~35c: 5 minutes) 5 cicles 10. Resistance to soldering heat Neither deformation on the appearance nor remarkable contact backlash is found. Reflow: 250c: 20 seconds Manual soldering: soldering iron temperature: 300c for 3 seconds Note 1 : Temperature rise included when energized Note 2 : This storage indicates a long-term storage state for the unused product before the board mounted. The operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed to the board. Note 3 : The above standards represent this series. Individual formal agreement should be based on the "Specification". Material Product Part Material Treatment Remarks Socket Insulator Polyamide White UL94V-0 Insulator Polyamide Beige UL94V-0 Header Contact Brass Solder plating ------- In-line Plug Insulator Polyamide White UL94V-0 retainer Insulator Polyamide Black UL94V-0 Crimping contact Contact Phosphor copper Tin plating ------- Note : The whisker method is implemented for HRS tin plating. 2 Ordering information Pin header DF 1E C - P - 2.5 DSA q w e r t y u q Series name : DF r Number of Contacts : 2 to 15 contacts w Series No. : 1E t Connector Type e Hold Types P : Pin Header Standard Product Potting With Boss C Without Boss With Boss G Without Boss y Contact Pitch : 2.5mm u Form type DSA : Straight Dip DS : Right Angle Type Note 1 : The right angle pin header has no symbol. Note 2 : The potting header has 2 to 10 contacts. Socket q Series name : DF DF 1E - S - 2.5 C q w e r t w Series No. : 1E y r Connector type S: Socket e Number of Contacts : 2 to 15 contacts t Contact Pitch : 2.5mm y Form Type C : Crimping socket In-line plug DF 1E A - EP - 2.5 C q w e r t y u q Series name : DF r Number of Contacts : 2 to 10 contacts w Series No. : 1E t EP : In-line plug e In-line Plug type y Contact Pitch : 2.5mm None: With Panel mount Lock A : Without Panel mount Lock u Form Type C : Crimping socket Crimping contact q Series name : DF DF 1E - SCF q w e w Series No. r e Applicable Cable Size : 2022 : AWG#20~#22 Socket side : 1B (Note 1) 2428 : WG#24~#28 Plug side : 1E 1E (Note 1) 30 : AWG#30 r Packaging Type SCF : Female contact : Reel SF : Female contact : Bag PCF : Male contact : Reel PC : Male contact : Bag Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B2428SC(F), and DF1B-30SC(F) contacts. Note 1 : When no retainer is used, all DF1B-SC(F) and DF1E2022SC(F) contacts can be used. Retainer DF 1E - RS/P - 2.5 q w e r t q Series name : DF r Connector Type w Series No. : 1E RS/P : Retainer e Number of Contacts : 2 to 10 contacts Commonly used for socket and in-line plug t Contacts Pitch:2.5mm 3 Application pattern Socket Retainer Photo : Contact Inserted Pin header Straight type Relay plug In-line plug (panel mount lock type) Photo: contact Inserted Straight potting type In-line plug Photo: contact Inserted Right angle type 4 Right angle pin header 5.4 Contact No. mark 5.9 A 2.9 0.5 8 6.95 10 Mold Cavity No. mark M 0.64 P = 2.5 A B 8.3 4.5 10.8 13.8 Contact No.1 indicated 3.2 Note 2 Product No. HRS No. Number of Contacts A B DF1E -02P-2.5DS() CL541 - 0985- 0 - 2 02.5 07.5 DF1E -03P-2.5DS() CL541 - 0986- 3 - 3 05.0 10.0 DF1E -04P-2.5DS() CL541 - 0987- 6 - 4 07.5 12.5 DF1E -05P-2.5DS() CL541 - 0988- 9 - 5 10.0 15.0 DF1E -06P-2.5DS() CL541 - 0989- 1 - 6 12.5 17.5 DF1E -07P-2.5DS() CL541 - 0990- 0 - 7 15.0 20.0 DF1E -08P-2.5DS() CL541 - 0991- 3 - 8 17.5 22.5 DF1E -09P-2.5DS() CL541 - 0992- 6 - 9 20.0 25.0 DF1E -10P-2.5DS() CL541 - 0993- 9 - 10 22.5 27.5 DF1E -11P-2.5DS() CL541 - 0994- 1 - 11 25.0 30.0 DF1E -12P-2.5DS() CL541 - 0995- 4 - 12 27.5 32.5 DF1E -13P-2.5DS() CL541 - 0996- 7 - 13 30.0 35.0 DF1E -14P-2.5DS() CL541 - 0997- 0 - 14 32.5 37.5 DF1E -15P-2.5DS() CL541 - 0998- 2 - 15 35.0 40.0 The symbol included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures. BPCB footprints (board thickness t = 1.6 0.1) A0.1 P = 2.50.05 - O1 .1 + 0 5 0. 1 Straight pin header 5.4 Contact No. mark 5.9 A 0.5 8 6.95 10 Mold Cavity No. mark P = 2.5 A B 3.6 4.5 10.8 8.3 Contact No.1 indicated M 0.64 3.2 Note 2 Product No. HRS No. Number of Contacts A B DF1EC-02P-2.5DSA() CL541- 0867- 4 - 2 02.5 07.5 DF1EC-03P-2.5DSA() CL541- 0868- 7 - 3 05.0 10.0 DF1EC-04P-2.5DSA() CL541- 0869- 0 - 4 07.5 12.5 DF1EC-05P-2.5DSA() CL541- 0870- 9 - 5 10.0 15.0 DF1EC-06P-2.5DSA() CL541- 0871- 1 - 6 12.5 17.5 DF1EC-07P-2.5DSA() CL541- 0872- 4 - 7 15.0 20.0 DF1EC-08P-2.5DSA() CL541- 0873- 7 - 8 17.5 22.5 DF1EC-09P-2.5DSA() CL541- 0874- 0 - 9 20.0 25.0 DF1EC-10P-2.5DSA() CL541- 0875- 2 - 10 22.5 27.5 DF1EC-11P-2.5DSA() CL541- 0876- 5 - 11 25.0 30.0 DF1EC-12P-2.5DSA() CL541- 0877- 8 - 12 27.5 32.5 DF1EC-13P-2.5DSA() CL541- 0878- 0 - 13 30.0 35.0 DF1EC-14P-2.5DSA() CL541- 0879- 3 - 14 32.5 37.5 DF1EC-15P-2.5DSA() CL541- 0880- 2 - 15 35.0 40.0 The symbol included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures. Note 4. : The radial package is prepared for DF1EC-P-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2 and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.) BPCB footprints (board thickness t = 1.6 0.1) A0.1 P = 2.50.05 - O1 .1 + 0 0. 1 6 Straight pin header for potting 5.4 Mold Cavity No. mark A 10 5.9 6.95 C Contact No. mark P= 2.5 A B 3 16.3 4.5 8.3 Contact No.1 indicated 3.2 M 0.64 Note 2 Note 2 Product No. HRS No. Number of Contacts A B C DF1EG -02P-2.5DSA() CL541 - 0923 - 3 2 02.5 07.5 7.8 DF1EG -03P-2.5DSA() CL541 - 0924 - 6 3 05.0 10.0 7.8 DF1EG -04P-2.5DSA() CL541 - 0925 - 9 4 07.5 12.5 7.8 DF1EG -05P-2.5DSA() CL541 - 0926 - 1 5 10.0 15.0 8.0 DF1EG -06P-2.5DSA() CL541 - 0927 - 4 6 12.5 17.5 8.0 DF1EG -07P-2.5DSA() CL541 - 0928 - 7 7 15.0 20.0 8.0 DF1EG -08P-2.5DSA() CL541 - 0929 - 0 8 17.5 22.5 8.0 DF1EG -09P-2.5DSA() CL541 - 0930 - 9 9 20.0 25.0 8.0 DF1EG -10P-2.5DSA() CL541 - 0931 - 1 10 22.5 27.5 8.0 DF1EG -11P-2.5DSA() CL541 - 0932 - 4 11 25.0 30.0 8.0 The symbol included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. Note 3. : Styles of 2 to 4 contact may partially differ from the above figures. Note 4. : The radial tape packaging is prepared for DF1EG-P-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged 2 and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.) BPCB footprints (board thickness t = 1.6 0.1) A0.1 P = 2.50.05 - O1 .1 + 0 7 0. 1 In-line plug (panel mount lock type) A 2.8 2.8 B P = 2.5 0.9 Mold Cavity No. mark Contact No. mark A 6.9 8.1 1 0 C 18.8 12 Contact No.1 indicated 10 9 7 5 3 1 Contact No. indicated Photo: contact inserted. Contact No.1 indicated Note 2 Note 3 Product No. HRS No. Number of Contacts A B C D E DF1E-02EP-2.5C() CL541- 0943- 0 - 2 8.0 2.5 15.0 8.4 12.5 DF1E-03EP-2.5C() CL541- 0944- 3 - 3 10.5 5.0 17.5 10.9 15.0 DF1E-04EP-2.5C() CL541- 0945- 6 - 4 13.0 7.5 20.0 13.4 17.5 DF1E-05EP-2.5C() CL541- 0946- 9 - 5 15.5 10.0 22.5 15.9 20.0 DF1E-06EP-2.5C() CL541- 0947- 1 - 6 18.0 12.5 25.0 18.4 22.5 DF1E-07EP-2.5C() CL541- 0948- 4 - 7 20.5 15.0 27.5 20.9 25.0 DF1E-08EP-2.5C() CL541- 0949- 7 - 8 23.0 17.5 30.0 23.4 27.5 DF1E-09EP-2.5C() CL541- 0950- 6 - 9 25.5 20.0 32.5 25.9 30.0 DF1E-10EP-2.5C() CL541- 0951- 9 - 10 28.0 22.5 35.0 28.4 32.5 The symbol included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. Note 4. Use the no radius side at the panel edge in the looking area. Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.) Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures. * Refer to page B122 for the retainer. BPanel cut-outs +0.1 0 (E+ Panel Thickness X 1.7~2.0 1.5 1.3~1.6 1.0 0.9~1.2 0.5 0.7~0.8 0.0 5.8 +0.2 0 1.1 +0.1 0 D +0.1 0 Note 4 4.20.05 3.5 +0.1 0 +0.1 8.4 0 Panel 8 In-line plug A B P = 2.5 0.9 Mold Cavity No. mark Contact No. mark A 6.9 8.1 10 Contact No.1 indicated 18.8 Photo: Contact Inserted 10 9 7 5 3 1 Contact No. mark Note 2 Contact No.1 indicated Note 3 Product No. HRS No. Number of Contacts A B DF1EA -02EP-2.5C() CL541 - 0957 - 5 - 2 08.0 02.5 DF1EA -03EP-2.5C() CL541 - 0958 - 8 - 3 10.5 05.0 DF1EA -04EP-2.5C() CL541 - 0959 - 0 - 4 13.0 07.5 DF1EA -05EP-2.5C() CL541 - 0960 - 0 - 5 15.5 10.0 DF1EA -06EP-2.5C() CL541 - 0961 - 2 - 6 18.0 12.5 DF1EA -07EP-2.5C() CL541 - 0962 - 5 - 7 20.5 15.0 DF1EA -08EP-2.5C() CL541 - 0963 - 8 - 8 23.0 17.5 DF1EA -09EP-2.5C() CL541 - 0964 - 0 - 9 25.5 20.0 DF1EA -10EP-2.5C() CL541 - 0965 - 3 - 10 28.0 22.5 The symbol included in HRS No. and the product spec No. indicate a Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. Note 4. : Styles of 2 to 4 contacts partially differ from the above figures. * Refer to page B122 for retainer. 9 4.55 Socket P = 2.5 A B C 11.8 8.5 Note 2 Photo: Contact Inserted 10 1 No. 1 contact indicated Contact No. mark 7.55 A Mold Cavity No. mark Note 3 Note 3 Note 4 Note 4 Product No. HRS No. Number of Contacts A B C DF1E -02S-2.5C() CL541 - 0811 - 0 - 2 02.5 08.0 05.4 DF1E -03S-2.5C() CL541 - 0812 - 2 - 3 05.0 10.5 07.9 DF1E -04S-2.5C() CL541 - 0813 - 5 - 4 07.5 13.0 10.4 DF1E -05S-2.5C() CL541 - 0814 - 8 - 5 10.0 15.5 12.9 DF1E -06S-2.5C() CL541 - 0815 - 0 - 6 12.5 18.0 15.4 DF1E -07S-2.5C() CL541 - 0816 - 3 - 7 15.0 20.5 17.9 DF1E -08S-2.5C() CL541 - 0817 - 6 - 8 17.5 23.0 20.4 DF1E -09S-2.5C() CL541 - 0818 - 9 - 9 20.0 25.5 22.9 DF1E -10S-2.5C() CL541 - 0819 - 1 - 10 22.5 28.0 25.4 DF1E -11S-2.5C() CL541 - 0820 - 0 - 11 25.0 30.5 27.9 DF1E -12S-2.5C() CL541 - 0821 - 3 - 12 27.5 33.0 30.4 DF1E -13D-2.5C() CL541 - 0822 - 6 - 13 30.0 35.5 32.9 DF1E -14S-2.5C() CL541 - 0823 - 9 - 14 32.5 38.0 35.4 DF1E -15S-2.5C() CL541 - 0824 - 1 - 15 35.0 40.5 37.9 The symbol included in HRS No. and the product spec No. indicate a Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion. Note 3. : The 2 consult Has no wall on the locking side Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends. * Refer to page B122 for the retainer. 10 Retainer A 1.9 B 1.7 P = 2.5 1.5 3.3 5.9 0.7 Note2 Note2 Contact No. mark A1 0 Mold Cavity No. mark Product No. HRS No. Number of Contacts A B DF1E -02RS/P-2.5() CL541 - 0971 - 6 2 08.0 02.5 DF1E -03RS/P-2.5() CL541 - 0972 - 9 3 10.5 05.0 DF1E -04RS/P-2.5() CL541 - 0973 - 1 4 13.0 07.5 DF1E -05RS/P-2.5() CL541 - 0974 - 4 5 15.5 10.0 DF1E -06RS/P-2.5() CL541 - 0975 - 7 6 18.0 12.5 DF1E -07RS/P-2.5() CL541 - 0976 - 0 7 20.5 15.0 DF1E -08RS/P-2.5() CL541 - 0977 - 2 8 23.0 17.5 DF1E -09RS/P-2.5() CL541 - 0978 - 5 9 25.5 20.0 DF1E -10RS/P-2.5() CL541 - 0979 - 8 10 28.0 22.5 The symbol included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends. * This retainer can be used together with the socket and relay plug. 11 Plug crimping contact 1.5 2.2 0.64 2.2 1.2 0.8 19.9 14.9 6.5 0.64 Applicable cable (tin plating annealed copper wire) Recommended cable UL1061, UL1007 Conductor Size (Wire construction) AWG # 20 (21 cores./0.18mm) Strip length AWG # 22 (17 cores./0.16mm) 3.0~3.7mm Note : If other cables are used instead of the applicable cable, contact Hirose sales department. AWG # 24 (11 cores./0.16mm) AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm) Product No. HRS No. DF1E - 2022PCF CL541 - 0937 - 8 DF1E - 2022PC CL541 - 0938 - 0 DF1E - 2428PCF CL541 - 0939 - 3 DF1E - 2428PC CL541 - 0940 - 2 DF1E - 30PCF CL541 - 0941 - 5 DF1E - 30PC CL541 - 0942 - 8 Applicable Cable Applicable Cable Indication AWG Jacket Diameter 20 22 AWG # 20 AWG # 22 1.2~1.9mm 24 28 AWG # 24 AWG # 28 0.9~1.5mm 30 AWG # 30 0.6~1.2mm Packaging Type Quantity Reel 10,000 Bag 100 Reel 10,000 Bag 100 Reel 10,000 Bag 100 Crimping contact extraction tool DF-C-PO(B) 12 Socket crimping contact DF1E-2022SCF DF1B - * * * * SCF 1.75 1.75 0.975 1.95 1.4 Applicable cable indicated 0.83 1.95 2.5 9.5 14 9.4 3.35 2.55 Applicable cable indicated 1.6 1.4 1.4 2.4 1 6.1 12.9 1.6 0.55 Applicable cable (tin plating annealed copper wire) Recommended cable UL1061, UL1007 Conductor Size (Wire construction) AWG # 20 (21 cores./0.18mm) Strip length AWG # 22 (17 cores./0.16mm) 2.0mm~2.5mm Note : If other cables are used instead of the applicable cable, consult Hirose sales department. AWG # 24 (11 cores./0.16mm) AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm) Product No. HRS No. DF1E - 2022SCF CL541 - 0999 - 5 DF1E - 2022SC CL541 - 1000 - 2 DF1B - 2022SCF CL541 - 0223 - 1 DF1B - 2022SC CL541 - 0224 - 4 DF1B - 2428SCF CL541 - 0678 - 1 DF1B - 2428SC CL541 - 0679 - 4 DF1B - 30SCF CL541 - 0682 - 9 DF1B - 30SC CL541 - 0683 - 1 AWG Jacket Diameter 20 22 AWG # 20 AWG # 22 1.2~1.9mm Crimping contact extraction tool DF-C-PO(B) 13 Applicable Cable Applicable Cable Indication 20 22 AWG # 20 AWG # 22 1.2~1.9mm 24 28 AWG # 24 AWG # 28 0.9~1.5mm 30 AWG # 30 0.6~1.2mm Packaging Type Quantity Reel 10,000 Bag 100 Reel 10,000 Bag 100 Reel 10,000 Bag 100 Reel 10,000 Bag 100 BCrimping tools Item Product No. HRS No. AP105 - DF1E - 2022S Applicator Main Press Unit Contact Extraction Tool DF1E - 2022SCF AP105 - DF1B - 2022S K K CL901 - 4510 - 9 DF1B - 2022SCF AP105 - DF1B - 2428S K K CL901 - 4518 - 0 DF1B - 2428SCF AP105 - DF1B - 30S K K CL901 - 4517 - 8 DF1B - 30SCF AP105 - DF1B - 2022P K K CL901 - 4509 - 0 DF1E - 2022PCF AP105 - DF1B - 2428P K K CL901 - 4521 - 5 DF1E - 2428PCF AP105 - DF1B - 30P K K CL901 - 4519 - 3 DF1E - 30PCF CM - 105 K K CL901 - 0005 - 4 ------ CL550 - 0277 - 1 DF1E - 2022SC DF1B - TA2022SHC K K CL550 - 0182 - 7 DF1B - 2022SC DF1B - TA2428SHC K K CL550 - 0209 - 1 DF1B - 2428SC DF1B - TA30SHC K K CL550 - 0211 - 3 DF1B - 30SC HT102/DF1BE - 2022P CL550 - 0278 - 4 DF1E - 2022PC HT102/DF1BE - 2428P CL550 - 0279 - 7 DF1E - 2428PC HT102/DF1BE - 30P CL550 - 0280 - 6 DF1E - 30PCF DF - C - PO (B) CL550 - 0179 - 2 DF1E - 2022SC (F) DF1B - * * * * SC (F) DF1E - * * * * PC (F) HT102/DF1E - 2022S Manual Crimping Tool Applicable Contact CL901 - 4561 - 0 K " to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized. Note 1. : Add "K Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. 14 BApplication pattern Standard header 8.5 DF1E _ S _ 2.5 C DF1E _ RS / P _ 2.5 18.8 DF1E# _ P _ 2.5 DSA 17.3 DF1E _ P _ 2.5 DS 8.5 14.3 15.8 DF1E _ RS / P _ 2.5 DF1E _ S _ 2.5 C 3.7 10.8 3 14.3 Header for potting 8 DF1E _ S _ 2.5 C DF1E _ RS / P _ 2.5 11.7 8 MAX 19.8 21.3 Potting Resin 3.2 DF1E# _ P _ 2.5 DSA Panel mounting lock in-line plug In-line plug 25.3 25.3 17 DF1E _ RS / P _ 2.5 DF1E _ RS / P _ 2.5 DF1E _ S _ 2.5 C DF1E _ RS / P _ 2.5 DF1E _ S _ 2.5 C DF1EA _ EP _ 2.5 C DF1E _ EP _ 2.5 C 15.5 22.3 15 9 9 8.1 Panel DF1E _ RS / P _ 2.5 22.3 BPrecautions for use 1. Recommended soldering condition : Flow condition with automatic solder machine Soldering temperature: 255c, soldering time: within 3 seconds Manual soldering condition Soldering temperature: 29010c, soldering time: within 2 seconds 2. Cleaning condition : Refer to the "Nylon Connector Instruction Manual" contained in the other nylon connector catalog. However, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. Connection condition : Refer to the "Nylon Connector Instruction Manual" contained in the other nylon connector catalog. 4. Cautions : To remove the connector, if the connector is forcedly removed, it will cause connector damage. If the connector is hardly removed, slightly push the connector once, and then remove it using the lock. In some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. In this case, it is recommended to use the retainer. If the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. B127