TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
6-Pin 2 x 2 mm DFN Package
Key Features
• General Purpose
• Broadband: 100 – 6000 MHz
• Low Insertion Loss: 0.3 dB at 1 GHz
• High Input IP3: +56 dBm at 1 GHz
• CMOS Compatible Dual Voltage Control
• Lead Free, RoHS Compliant SMT Package
Product Overview
The TQP4M0008 is a GaAs FET single-pole, double throw
(SPDT) low loss reflective switch with good isolation. The
TQP4M0008 may be operated DC control signals from
+1.8 to +5 Volts. The TQP4M0008 has 100 – 6000 MHz
broadband performance.
The TQP4M0008 is packaged in a RoHS-compliant,
compact 6-pin 2 x 2 mm surface-mount leadless package.
The TQP4M0008 is an ideal choice for wireless
infrastructure and test & measurement applications
requiring low insertion loss and high input IP3. It can also
be used for any general purpose of RF application.
Ordering Information
Part No.
Description
TQP4M0008
2,500 pieces on a 7” reel (standard)
TQP4M0008-PCB
0.1 – 6 GHz Evaluation Board
Applications
• WLAN
• Cellular Infrastructure
• Test and Measurement
• Smart Energy
• UHF/VHF
• LMR
• General Purpose Broadband Wireless
Functional Block Diagram
Top View
Pin Configuration
Pin No.
Symbol
1
RF2
2
GND
3
RF1
4
V1
5
RFC
6
V2
Backside Paddle
RF/DC GND
1
2
3
GND
RF1
RF2
RFC
V1
V2
Backside Paddle - RF/DC GND
Pin 1 Reference Mark
6
5
4
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
Recommended Operating Conditions
Parameter
Min
Typ
Max
Units
V1, V2 High State
+1.8
+3.3
+5.0
V
Operating Temperature
−40
+95
°C
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Absolute Maximum Ratings
Parameter
Rating
Storage Temperature
−65 to +150 °C
RF Input Power, CW, 50 Ω, T=25 °C
+33 dBm
Max RF Input Power, peak envelope
+37 dBm
Control Voltage (V1, V2)
+6 V
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications
Parameter
Conditions (1)
Min
Typ
Max
Units
Operational Frequency Range
100
6000
MHz
Insertion Loss
0.1 – 1.0 GHz
0.35
0.75
dB
1.0 – 2.5 GHz
0.45
0.90
2.5 – 3.0 GHz
0.55
0.95
3.0 – 4.5 GHz
0.65
4.5 – 6.0 GHz
0.85
Isolation
0.1 – 1.0 GHz
20
30
dB
1.0 – 2.5 GHz
18
25
2.5 – 3.0 GHz
16
22
3.0 – 4.5 GHz
20
4.5 – 6.0 GHz
17
Return Loss, RFC Port
0.1 – 1.0 GHz
20
dB
1.0 – 2.5 GHz
15
2.5 – 3.0 GHz
15
3.0 – 4.5 GHz
17
4.5 – 6.0 GHz
15
Input P1dB (2)
At 1 GHz
37
dBm
Input IP3 (2)
Pout = +15 dBm/tone, at 1 GHz, ∆f = 1 MHz
45
56
dBm
Switch Time
tOFF,tON (50% CTL to 10/90% RF)
110
ns
tOFF,tON (50% CTL to 2/98% RF)
180
ns
Digital Control Voltage (V1, V2) (2)
Logic Low
0
0.45
V
Logic High
1.8
3.3
5.0
V
Control Pin Current
V1 or V2 at +5V
60
μA
Notes:
1. Test conditions unless otherwise noted: V1 = +3.0 V, V2 = 0 V, Temp = +25 °C, 50 Ω system.
2. Specified IP3 and P1dB at V1 or V2 ≥ +3.3V
Switch Control Truth Table
Control Voltages
Signal Path State
V1
V2
RFC to RF1
RFC to RF2
Low
High
Off (isolation)
On (Insertion Loss)
High
Low
On (Insertion Loss)
Off (isolation)
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
TQP4M0008-PCB Evaluation Board
Qorvo PCB 1094172 Material and Stack-up
50 ohm line dimensions: Width = .021”
Spacing = .006”
Notes:
1. J7 to J8 thru line may be used to de-embed PCB losses to device.
Typical Performance − TQP4M0008-PCB
Test conditions unless otherwise noted: V1=+3 V, V2=0 V, Temp=25°C, 50 Ω system
Parameter
Typical Value
Units
Frequency
1
2
3
GHz
Insertion Loss (1)
0.3
0.4
0.45
dB
RFC Port Return Loss
19
15
14
dB
RFC to RF1/RF2 Isolation
32
26
24
dB
RF1 to RF2 Isolation
33
26
25
dB
Input P1dB
+36
+35.5
+35
dBm
Input IP3 (f=1 GHz, 1 MHz tone spacing, Pout=+15 dBm/tone)
+54
+57
+59
dBm
Notes:
1. Insertion Loss values reflect de-embedding of evaluation board RF line and DC blocking capacitor losses.
J4
C4
C3
C1
J5
J6
C5
C2
U1
J2
J7
J1
J3
J8
J5 V2
J2
RF1
Backside
Paddle
J3
RFC
J6 GND
J7
RF
Input
C5
100 pF
J8
RF
Output
C4
100 pF
PCB Loss Calibration Line
U1
1
2
3
6
5
4
J1
RF2
C1
100 pF
C2
100 pF
C3
100 pF
J4 V1
1 oz. Cu bottom layer
Nelco N-4000-13
Core
Nelco N-4000-13
εr=3.7 typ.
1 oz. Cu top layer
1 oz. Cu inner layer
1 oz. Cu inner layer
0.014"
0.014"
0.062" ± 0.006"
Finished Board
Thickness
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
Performance Plots − TQP4M0008-PCB
Test conditions unless otherwise noted: V1=+3 V, V2=0 V, Temp=+25°C, 50 Ω system
-1.5
-1
-0.5
0
0.5
0 1 2 3 4 5 6
|S21| (dB)
Frequency (GHz)
Insertion Loss vs. Frequency
RFC to RF1 or RF2
Temp.=+25°C
-35
-30
-25
-20
-15
-10
-5
0
0 1 2 3 4 5 6
|S11| (dB)
Frequency (GHz)
RFC Port Return Loss
Temp.=+25°C
45
50
55
60
65
0 0.5 1 1.5 2 2.5 3 3.5
IIP3 (dBm)
Frequency (GHz
IIP3 vs. Frequency
1 MHz tone spacing
Pout=+15 dBm/tone
Temp.=+25°C
20
25
30
35
40
45
50
0 0.5 1 1.5 2 2.5 3 3.5
P1dB (dBm)
Frequency (GHz)
P1dB vs. Frequency
Temp.=+25°C
-60
-50
-40
-30
-20
-10
0
0 1 2 3 4 5 6
|S21| (dB)
Frequency (GHz)
RFC to RF1/RF2 Isolation vs. Frequency
Temp.=+25°C
-60
-50
-40
-30
-20
-10
0
0 1 2 3 4 5 6
|S21| (dB)
Frequency (GHz)
RF1 to RF2 Isolation vs. Frequency
Temp.=+25°C
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
Pin Configuration and Description
Pin No.
Symbol
Description
1
RF2
RF output 2, DC voltage present, DC block required.
2
GND
RF/DC Ground
3
RF1
RF output 1, DC voltage present, DC block required.
4
V1
Control Voltage
5
RFC
Antenna Input, DC voltage present, DC block required.
6
V2
Control Voltage
Backside Paddle
RF/DC GND
RF/DC Ground. Use recommended via hole pattern and ensure good solder
attach for best thermal and electrical performance.
1
2
3
GND
RF1
RF2
RFC
V1
V2
Backside Paddle - RF/DC GND
Pin 1 Reference Mark
6
5
4
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
Mechanical Information
Package Marking and Dimensions
Marking: Part number – 0008
Trace code – XXXX (Up to 4 characters assigned by subcontractor)
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. We recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.010”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
3X
3
0.64
PACKAGE
OUTLINE
Ø.254 (.010) PLATED
THRU VIA HOLES
1.60
8X 0.67
0.50 PITCH, TYP
8X 0.30
2X 0.20
0.70
0.35
1.600±0.050
Exp.DAP
2.000±0.050
2.000±0.050 PIN #1 IDENTIFICATION
CHAMFER 0.300X45°
0.600±0.050
Exp.DAP
0.5000 Bsc
0.3000±0.050
TOP VIEW BOTTOM VIEW
0.000-0.0500
0.2030 Ref.
0.2500±0.050
SIDE VIEW
PIN #1 IDENTIFICATION
0.8500±0.050
0008
XXXX
TQP4M0008
Low Loss Reflective SPDT Switch
Datasheet June 15, 2018 | Subject to change without notice
www.qorvo.com
®
Handling Precautions
Parameter
Rating
Standard
Caution!
ESD-Sensitive Device
ESD – Human Body Model (HBM)
Class 1B
ESDA / JEDEC JS-001-2012
ESD – Charged Device Model (CDM)
Class C3
JEDEC JESD22-C101F
MSL – Moisture Sensitivity Level
Level 1
IPC/JEDEC J-STD-020
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information:
Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Pb