Serial Device Server 6SHFLFDWLRQ Network Interface Ethernet: 2* 10/100BaseTX, Redundant Dual Ethernet Connector: RJ-45, Auto MDI/MDI-X Feature: Auto Recovery in less than 200ms Protection: Built-in 1.5 KV magnetic isolation protection Protocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTP Serial Communication Number of DI: 4 Power Input voltage: 5V/TTL Logic 0: 0.8V max (0-0.8V) Logic 1: 2.0V min (2-5V) Number of DO: 2 Power Output voltage 5V/TTL Logic 0: 0.8V max (0-0.8V) Logic 1: 2.0V min (2-5V) Features LED: Power 1/Power 2: Startup(Red); Ready(Green) Ethernet port: Left:100M Link (Green On)/Activity(Green Blinking) Right:10M Link (Orange On)/Activity(Orange Blinking) Serial 1/2/3/4:TX only(Green), RX only(Red), Both RX/ TX(Orange) &RQJXUDWLRQ Windows Utility-JetPort Commander, HTTPS, SSH Serial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP Reset: Software reload default, Hardware reset button JetPort Commander: Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, 1RWLFDWLRQVHWWLQJ)LUPZDUH8SJUDGH&RQJXUDWLRQ %DFNXSDQG5HVWRUH*URXS&RQJXUDWLRQ:L]DUGV Serial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP Advanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval time *URXS&RQJXUDWLRQ:L]DUG -HW3RUW&RPPDQGHU*URXS,3:L]DUG*URXSUPZDUH upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup Wizard Power Requirements System Power: PWR1: 12~48VDC Terminal Block PWR2: 12~48VDC Power Jack with Power Adapter Power Line protection: 1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5 Mechanical Dimensions: 145mm(W)x46.5mm(H)x120mm(D) Regulatory Approvals: FCC Class A,CE Class A,UL,RoHS Environmental Ordering Information JetPort 5604 Industrial 4-port RS-232/422/485 Redundant Serial Device Server Includes: 4-port RS-232/RS422/RS485 Redundant Serial Device Server Quick Installation Guide 100-240VAC power adapte Din-Rail kit and foot pads Documentation and Software CD-ROM O Operating Temperature: -10 ~ 70 C Operating Humidity: 5% ~ 95%, (non-condensing) Storage Temperature: -40 ~ 85 C Warranty: 5 years O Industrial 4-port Redundant Serial Device Server Digital Input/Output Windows Utility JetPort 5604 Number of Ports: 4 Interface: RS-232/RS422, 2/4-wire RS485 Connectors: male DB9 Baud Rates: 110 bps to 460.8K bps Data Bits: 5, 6, 7, 8 Parity: odd, even, none Stop Bits: 1, 1.5, 2 RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD RS-422: Tx+,Tx-, Rx+, Rx-,GND RS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GND RS-485 (2-wire): Data+, Data-,GND Flow Control: XON/XOFF, RTS/CTS, DTR/DSR Serial Line Protection: 15KV ESD Long Distance Termination: 2*pin 120ohm DIP switches Beeper: Embedded beeper for positioning RTTD: Redundant to the Device, Auto-recover in less than 200ms SNTP: For time management Access IP Table: 16 IP addresses to prevent illegal users Monitor: Devices' status, VCOM status SNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap E-Mail Alert: $XWRPDWLFHPDLOZDUQLQJE\SUHGHQHG events System Log: Trap to Syslog server or local display System Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, DI/DO changed, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected. TTY Driver: Fixed TTY driver for Linux