Specifications are subject to change without notice (25.10.99) 1
Plug Output Time ranges Supply: 24 VAC/DC Supply: 120 VAC Supply: 220 VAC
Circular SPDT 0.15- 6 s C 118 024 006 C 118 120 006 C 118 220 006
8 pin 1.5 - 60 s C 118 024 060 C 118 120 060 C 118 220 060
15 - 600 s C 118 024 600 C 118 120 600 C 118 220 600
Circular 0.15- 6 s C 111 024 006 C 111 120 006 C 111 220 006
11 pin 1.5 - 60 s C 111 024 060 C 111 120 060 C 111 220 060
15 - 600 s C 111 024 600 C 111 120 600 C 111 220 600
Circular DPDT 0.15- 6 s C 218 024 006 C 218 120 006 C 218 220 006
8 pin 1.5 - 60 s C 218 024 060 C 218 120 060 C 218 220 060
15 - 600 s C 218 024 600 C 218 120 600 C 218 220 600
Circular 0.15- 6 s C 211 024 006 C 211 120 006 C 211 220 006
11 pin 1.5 - 60 s C 211 024 060 C 211 120 060 C 211 220 060
15 - 600 s C 211 024 600 C 211 120 600 C 211 220 600
Plug Output Time ranges Supply: 24 VAC/DC Supply: 120 VAC Supply: 220 VAC
Circular SPDT 0.15- 6 s C 108 024 006 C 108 120 006 C 108 220 006
8 pin 1.5 - 60 s C 108 024 060 C 108 120 060 C 108 220 060
15 - 600 s C 108 024 600 C 108 120 600 C 108 220 600
Circular 0.15- 6 s C 101 024 006 C 101 120 006 C 101 220 006
11 pin 1.5 - 60 s C 101 024 060 C 101 120 060 C 101 220 060
15 - 600 s C 101 024 600 C 101 120 600 C 101 220 600
Circular DPDT 0.15- 6 s C 208 024 006 C 208 120 006 C 208 220 006
8 pin 1.5 - 60 s C 208 024 060 C 208 120 060 C 208 220 060
15 - 600 s C 208 024 600 C 208 120 600 C 208 220 600
Circular 0.15- 6 s C 201 024 006 C 201 120 006 C 201 220 006
11 pin 1.5 - 60 s C 201 024 060 C 201 120 060 C 201 220 060
15 - 600 s C 201 024 600 C 201 120 600 C 201 220 600
Timers
Mono-function, plug-in, sym-
metrical, ON/OFF miniature
recyclers up to 600 s (10 min)
covering 3 individual time
ranges. Optional ON- or OFF-
time period first. This eco-
nomical relay is often used in
lighting systems such as ad-
vertising signs, etc.
Function
Output
Type
Power supply
Time range
Time ranges: 0.15 s to 600 s
Automatic start
C .0.: Starts with OFF-time
C .1.: Starts with ON-time
Knob-adjustable time within range
Oscillator-controlled time circuit
Repeatability deviation: 1%
Output: 10 A SPDT or 8 A DPDT relay
Plug-in type module
Scantimer housing
LED-indication for relay on
AC or DC power supply
Symmetrical Recycler
Types C 101, C 201, C 108, C 208, C 111, C 211, C 118, C 218
Ordering KeyProduct Description
Type Selection, OFF-Time Period First
Type Selection, ON-Time Period First
C 108 024 600
2Specifications are subject to change without notice (25.10.99)
Time ranges 0.15- 6 s
1.5 - 60 s
15.0 - 600 s
Time range accuracy 0 to +10% on max.
min. actual time min.
set time
Repeatability deviation 1%
Time variation
Within rated power supply 0.05%/V
and ambient temperature 0.2%/°C
Reset Power supply interruption min.
Time and/or relay 250 ms
C 108, C 208, C 118, C 218
C 101, C 201, C 111, C 211
C 108, C 101, C 118, C 111 C 208, C 201, C 218, C 211
Output SPDT relay DPDT relay
Basic electrical insulation 250 VAC (rms) (contact/electronics) 250 VAC (rms) (contacts/elec., contact/contact)
Contact ratings (AgCdO) µ (micro gap) µ (micro gap)
Resistive loads AC 1 10 A/250 VAC (2500 VA) 8 A/250 VAC (2000 VA)
DC 1 1 A/250 VDC (250 W) 0.4 A/250 VDC (100 W)
or 10 A/25 VDC (250 W) 4 A/25 VDC (100 W)
Small inductive loads AC 15 2.5 A/230 VAC 2.5 A/230 VAC
DC 13 5 A/24 VDC 5 A/24 VDC
Mechanical life 30 x 106operations 30 x 106operations
Electrical life AC 1 2.5 x 105operations (at max. load) 2.5 x 105operations (at max. load)
Operating frequency 7200 operations/h 7200 operations/h
Insulation voltages
Rated insulation voltage 2.0 kVAC (rms) (contact/electronics) 2.0 kVAC (rms) (contact/electronics)
Rated transient protection volt.
4 kV (1.2/50 µs) (contact/electronics) (IEC 60664) 4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)
Power supply AC types Installation cat. III (IEC 60664)
Rated operational voltage
through pins 2 & 10 220 220 VAC + 15/- 20%,
or pins 2 & 7 45 to 65 Hz
120 120 VAC + 15/- 20%,
45 to 65 Hz
024 24 VAC + 15/- 20%,
45 to 65 Hz
Dropout tolerance 10 ms
Rated insulation voltage None
Rated transient protection volt. 4 kV (1.2/50 µs) @ 220 VAC
2.5 kV (1.2/50 µs) @ 120 VAC
800 V (1.2/50 µs) @ 24 VAC
(line/neutral)
Power supply DC type Installation cat. III (IEC 60664)
Rated operational volt. 024 24 VDC + 15/- 20% (pin 2 pos.)
Rated insulation voltage None
Rated transient protection volt. 800 V (1.2/50 µs)
Consumption AC supply
60 mA @ 50 Hz/70 mA @ 60 Hz
DC supply 1 W
Power ON delay 200 ms
Power OFF delay 250 ms
Indication for
Output ON LED. red
Environment
Degree of protection IP 20 B
Pollution degree 2 (IEC 60664)
Operating temperature -20° to +50°C (-4° to +122°F)
Storage temperature -50° to +85°C (-58° to +185°F)
Weight 85 g
Approvals UL, CSA
Time Specifications
Output Specifications
Supply Specifications General Specifications
Specifications are subject to change without notice (25.10.99) 3
Example 1
(Types C .0.)
OFF-time period first
The time period starts when
power supply is applied.
At the end of the first set time
period, the relay operates. At
the end of the second set
time period (equal to the first),
the relay releases.
This sequence is repeated un-
til power supply is interrupted.
If power supply is disconnect-
ed, the time is reset and a re-
covery period of 250 ms sho-
uld be allowed before the re-
cycler is ready for reactiva-
tion.
Example 2
(Types C .1.)
ON-time period first
The relay operates and the
time period starts immediately
when power supply is applied.
At the end of the first set time
period, the relay releases. At
the end of the second set
time period (equal to the first),
the relay operates again.
This sequence is repeated
with equal intervals until pow-
er supply is interrupted. If
power supply is interrupted,
the time is reset and a recove-
ry period of 250 ms should be
allowed before the recycler is
ready for reactivation.
C 108, C 208, C 118, C 218
C 101, C 201, C 111, C 211
Power supply
C 101, C 111
C 201, C 211
Power supply
C 108, C 118
C 208, C 218
Knob-adjustable on scale in
seconds.
SocketsS 408, S 411
Hold down springHF
Mounting rack SM 13
Socket cover BB4
Potentiometer lock PL 1
For further information refer to "Accessories".
Power supply
Example 1: Relay on
Example 2: Relay on
Mode of Operation Wiring Diagrams
Time Setting Accessories
Operation Diagram