ACS04MS Data Sheet November 1998 File Number Radiation Hardened Hex Inverter Features The Radiation Hardened ACS04MS is a Hex Inverter. This device simply inverts the level present on each input. All inputs are buffered and the outputs are designed for balanced propagation delay and transition times. * QML Qualified Per MIL-PRF-38535 Requirements The ACS04MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment. These devices offer significant power reduction and faster performance when compared to ALSTTL types. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed below must be used when ordering. Detailed Electrical Specifications for the ACS04MS are contained in SMD 5962-98603. A "hot-link" is provided on our homepage with instructions for downloading. www.intersil.com/data/sm/index.asp 4541 * 1.25 Micron Radiation Hardened SOS CMOS * Radiation Environment - Latch-Up Free Under Any Conditions - Total Dose. . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU Immunity . . . . . . . . . . . . <1 x 10-10 Errors/Bit/Day - SEU LET Threshold . . . . . . . . . . . >100MeV/(mg/cm2) * Input Logic Levels. . . . VIL = (0.3)(VCC), VIH = (0.7)(VCC) * Output Current . . . . . . . . . . . . . . . . . . . . . . . . 8mA (Min) * Quiescent Supply Current . . . . . . . . . . . . . . 100A (Max) * Propagation Delay . . . . . . . . . . . . . . . . . . . . . . 15ns (Max) Applications * High Speed Control Circuits * Sensor Monitoring * Low Power Designs Ordering Information ORDERING NUMBER INTERNAL MKT. NUMBER 5962F9860301VCC ACS04DMSR-03 ACS04D/SAMPLE-03 ACS04D/SAMPLE-03 5962F9860301VXC ACS04KMSR-03 ACS04K/SAMPLE-03 5962F9860301V9A TEMP. RANGE (oC) PACKAGE DESIGNATOR -55 to 125 14 Ld SBDIP CDIP2-T14 25 14 Ld SBDIP CDIP2-T14 -55 to 125 14 Ld Flatpack CDFP4-F14 ACS04K/SAMPLE-03 25 14 Ld Flatpack CDFP4-F14 ACS04HMSR-03 25 Die N/A Pinouts ACS04MS (SBDIP) TOP VIEW ACS04MS (FLATPACK) TOP VIEW A1 1 14 VCC A1 1 14 VCC Y1 2 13 A6 Y1 2 13 A6 A2 3 12 Y6 A2 3 12 Y6 Y2 4 11 A5 A3 5 10 Y5 Y3 6 9 A4 GND 7 8 Y4 1 Y2 4 11 A5 A3 5 10 Y5 Y3 6 9 A4 GND 7 8 Y4 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 ACS04MS Die Characteristics DIE DIMENSIONS: PASSIVATION: Size: 2390m x 2390m (94 mils x 94 mils) Thickness: 525m 25m (20.6 mils 1 mil) Bond Pad: 110m x 110m (4.3 x 4.3 mils) Type: Phosphorous Silicon Glass (PSG) Thickness: 1.30m 0.15m SPECIAL INSTRUCTIONS: METALLIZATION: AI Bond VCC First Metal 1 Thickness: 0.7m 0.1m Metal 2 Thickness: 1.0m 0.1m ADDITIONAL INFORMATION: Worst Case Current Density: <2.0 x 105 A/cm2 Transistor Count: 82 SUBSTRATE POTENTIAL: Unbiased Insulator Metallization Mask Layout ACS04MS Y1 (2) A1 (1) VCC (14) A6 (13) A2 (3) (12) Y6 Y2 (4) (11) A5 NC NC A3 (5) (10) Y5 (6) Y3 (7) GND (8) Y4 (9) A4 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 2 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029